* [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle()
@ 2007-07-30 5:23 Tejun Heo
2007-07-30 5:24 ` [PATCH libata-dev#upstream 2/3] libata: add printf format attribute to ehi desc functions Tejun Heo
2007-08-15 8:49 ` [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle() Jeff Garzik
0 siblings, 2 replies; 8+ messages in thread
From: Tejun Heo @ 2007-07-30 5:23 UTC (permalink / raw)
To: Jeff Garzik, Alan Cox, linux-ide
ata_wait_idle() identified controller by printing out the address of
the Status register. This is bogus because 1. it's iomapped address
2. some controllers don't have Status register and don't initialize
the field. Use ata_port_printk() instead.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
Currently there's no equivalent ata_msg_* level for ATA_DEBUG, so the
printk is conditionalized with #ifdef ATA_DEBUG. We need to kill
ATA_DEBUG, ATA_VERBOSE_DEBUG and integrate them into ata_msg_* in the
future.
include/linux/libata.h | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
Index: work/include/linux/libata.h
===================================================================
--- work.orig/include/linux/libata.h
+++ work/include/linux/libata.h
@@ -1106,9 +1106,11 @@ static inline u8 ata_wait_idle(struct at
{
u8 status = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+#ifdef ATA_DEBUG
if (status != 0xff && (status & (ATA_BUSY | ATA_DRQ)))
- DPRINTK("ATA: abnormal status 0x%X on port 0x%p\n",
- status, ap->ioaddr.status_addr);
+ ata_port_printk(ap, KERN_DEBUG, "abnormal Status 0x%X\n",
+ status);
+#endif
return status;
}
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH libata-dev#upstream 2/3] libata: add printf format attribute to ehi desc functions 2007-07-30 5:23 [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle() Tejun Heo @ 2007-07-30 5:24 ` Tejun Heo 2007-07-30 5:25 ` [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration Tejun Heo 2007-08-15 8:49 ` [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle() Jeff Garzik 1 sibling, 1 reply; 8+ messages in thread From: Tejun Heo @ 2007-07-30 5:24 UTC (permalink / raw) To: Jeff Garzik, Alan Cox, linux-ide Tell the compiler that [__]ata_ehi_push_desc() functions take printf style format string and arguments. Signed-off-by: Tejun Heo <htejun@gmail.com> --- include/linux/libata.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) Index: work/include/linux/libata.h =================================================================== --- work.orig/include/linux/libata.h +++ work/include/linux/libata.h @@ -914,8 +914,10 @@ extern void ata_do_eh(struct ata_port *a /* * ata_eh_info helpers */ -extern void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...); -extern void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...); +extern void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); +extern void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); extern void ata_ehi_clear_desc(struct ata_eh_info *ehi); static inline void ata_ehi_schedule_probe(struct ata_eh_info *ehi) ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration 2007-07-30 5:24 ` [PATCH libata-dev#upstream 2/3] libata: add printf format attribute to ehi desc functions Tejun Heo @ 2007-07-30 5:25 ` Tejun Heo 2007-07-30 12:55 ` Alan Cox 2007-08-15 8:48 ` Jeff Garzik 0 siblings, 2 replies; 8+ messages in thread From: Tejun Heo @ 2007-07-30 5:25 UTC (permalink / raw) To: Jeff Garzik, Alan Cox, linux-ide Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> --- pata_hpt3x3 fixed as pointed out by Alan. drivers/ata/ahci.c | 4 ++ drivers/ata/libata-core.c | 27 +++++++---------- drivers/ata/libata-eh.c | 67 +++++++++++++++++++++++++++++++++++++++++++ drivers/ata/libata-sff.c | 23 +++++++++++--- drivers/ata/pata_cs5520.c | 23 +++++++++----- drivers/ata/pata_hpt3x3.c | 6 +++ drivers/ata/pata_icside.c | 19 ++++++++++-- drivers/ata/pata_isapnp.c | 4 ++ drivers/ata/pata_ixp4xx_cf.c | 13 +++++++- drivers/ata/pata_legacy.c | 2 + drivers/ata/pata_mpc52xx.c | 7 +++- drivers/ata/pata_mpiix.c | 16 ++++++---- drivers/ata/pata_pcmcia.c | 2 + drivers/ata/pata_pdc2027x.c | 17 +++++++--- drivers/ata/pata_platform.c | 4 ++ drivers/ata/pata_qdi.c | 5 ++- drivers/ata/pata_scc.c | 3 + drivers/ata/pata_winbond.c | 7 +++- drivers/ata/pdc_adma.c | 13 ++++++-- drivers/ata/sata_inic162x.c | 14 +++++++- drivers/ata/sata_mv.c | 8 ++++- drivers/ata/sata_promise.c | 11 +++++-- drivers/ata/sata_qstor.c | 11 +++++-- drivers/ata/sata_sil.c | 6 +++ drivers/ata/sata_sil24.c | 7 +++- drivers/ata/sata_svw.c | 12 +++++-- drivers/ata/sata_sx4.c | 19 +++++++----- drivers/ata/sata_uli.c | 13 ++++++++ drivers/ata/sata_via.c | 3 + drivers/ata/sata_vsc.c | 12 +++++-- include/linux/libata.h | 12 ++++++- 31 files changed, 309 insertions(+), 81 deletions(-) Index: work/drivers/ata/ahci.c =================================================================== --- work.orig/drivers/ata/ahci.c +++ work/drivers/ata/ahci.c @@ -1852,6 +1852,10 @@ static int ahci_init_one(struct pci_dev struct ata_port *ap = host->ports[i]; void __iomem *port_mmio = ahci_port_base(ap); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar"); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, + 0x100 + ap->port_no * 0x80, "port"); + /* standard SATA port setup */ if (hpriv->port_map & (1 << i)) ap->ioaddr.cmd_addr = port_mmio; Index: work/drivers/ata/libata-core.c =================================================================== --- work.orig/drivers/ata/libata-core.c +++ work/drivers/ata/libata-core.c @@ -6369,7 +6369,6 @@ int ata_host_register(struct ata_host *h /* set cable, sata_spd_limit and report */ for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; - int irq_line; u32 scontrol; unsigned long xfer_mask; @@ -6385,24 +6384,16 @@ int ata_host_register(struct ata_host *h } ap->sata_spd_limit = ap->hw_sata_spd_limit; - /* report the secondary IRQ for second channel legacy */ - irq_line = host->irq; - if (i == 1 && host->irq2) - irq_line = host->irq2; - + /* print per-port info to dmesg */ xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, ap->udma_mask); - /* print per-port info to dmesg */ if (!ata_port_is_dummy(ap)) - ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p " - "ctl 0x%p bmdma 0x%p irq %d\n", + ata_port_printk(ap, KERN_INFO, + "%cATA max %s %s\n", (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P', ata_mode_string(xfer_mask), - ap->ioaddr.cmd_addr, - ap->ioaddr.ctl_addr, - ap->ioaddr.bmdma_addr, - irq_line); + ap->eh_info.desc); else ata_port_printk(ap, KERN_INFO, "DUMMY\n"); } @@ -6485,7 +6476,7 @@ int ata_host_activate(struct ata_host *h irq_handler_t irq_handler, unsigned long irq_flags, struct scsi_host_template *sht) { - int rc; + int i, rc; rc = ata_host_start(host); if (rc) @@ -6496,8 +6487,8 @@ int ata_host_activate(struct ata_host *h if (rc) return rc; - /* Used to print device info at probe */ - host->irq = irq; + for (i = 0; i < host->n_ports; i++) + ata_port_desc(host->ports[i], "irq %d", irq); rc = ata_host_register(host, sht); /* if failed, just free the IRQ and leave ports alone */ @@ -6967,6 +6958,10 @@ EXPORT_SYMBOL_GPL(ata_pci_clear_simplex) EXPORT_SYMBOL_GPL(__ata_ehi_push_desc); EXPORT_SYMBOL_GPL(ata_ehi_push_desc); EXPORT_SYMBOL_GPL(ata_ehi_clear_desc); +EXPORT_SYMBOL_GPL(ata_port_desc); +#ifdef CONFIG_PCI +EXPORT_SYMBOL_GPL(ata_port_pbar_desc); +#endif /* CONFIG_PCI */ EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); EXPORT_SYMBOL_GPL(ata_port_abort); Index: work/drivers/ata/libata-eh.c =================================================================== --- work.orig/drivers/ata/libata-eh.c +++ work/drivers/ata/libata-eh.c @@ -151,6 +151,73 @@ void ata_ehi_clear_desc(struct ata_eh_in ehi->desc_len = 0; } +/** + * ata_port_desc - append port description + * @ap: target ATA port + * @fmt: printf format string + * + * Format string according to @fmt and append it to port + * description. If port description is not empty, " " is added + * in-between. This function is to be used while initializing + * ata_host. The description is printed on host registration. + * + * LOCKING: + * None. + */ +void ata_port_desc(struct ata_port *ap, const char *fmt, ...) +{ + va_list args; + + WARN_ON(!(ap->pflags & ATA_PFLAG_INITIALIZING)); + + if (ap->eh_info.desc_len) + __ata_ehi_push_desc(&ap->eh_info, " "); + + va_start(args, fmt); + __ata_ehi_pushv_desc(&ap->eh_info, fmt, args); + va_end(args); +} + +#ifdef CONFIG_PCI + +/** + * ata_port_pbar_desc - append PCI BAR description + * @ap: target ATA port + * @bar: target PCI BAR + * @offset: offset into PCI BAR + * @name: name of the area + * + * If @offset is negative, this function formats a string which + * contains the name, address, size and type of the BAR and + * appends it to the port description. If @offset is zero or + * positive, only name and offsetted address is appended. + * + * LOCKING: + * None. + */ +void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, + const char *name) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + char *type = ""; + unsigned long long start, len; + + if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) + type = "m"; + else if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) + type = "i"; + + start = (unsigned long long)pci_resource_start(pdev, bar); + len = (unsigned long long)pci_resource_len(pdev, bar); + + if (offset < 0) + ata_port_desc(ap, "%s %s%llu@0x%llx", name, type, len, start); + else + ata_port_desc(ap, "%s 0x%llx", name, start + offset); +} + +#endif /* CONFIG_PCI */ + static void ata_ering_record(struct ata_ering *ering, int is_io, unsigned int err_mask) { Index: work/drivers/ata/libata-sff.c =================================================================== --- work.orig/drivers/ata/libata-sff.c +++ work/drivers/ata/libata-sff.c @@ -600,6 +600,9 @@ int ata_pci_init_bmdma(struct ata_host * if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) && (ioread8(bmdma + 2) & 0x80)) host->flags |= ATA_HOST_SIMPLEX; + + ata_port_desc(ap, "bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 4) + 8 * i); } return 0; @@ -667,6 +670,10 @@ int ata_pci_init_sff_host(struct ata_hos ((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS); ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pci_resource_start(pdev, base), + (unsigned long long)pci_resource_start(pdev, base + 1)); + mask |= 1 << i; } @@ -837,24 +844,30 @@ int ata_pci_init_one(struct pci_dev *pde IRQF_SHARED, DRV_NAME, host); if (rc) goto err_out; - host->irq = pdev->irq; + + ata_port_desc(host->ports[0], "irq %d", pdev->irq); + ata_port_desc(host->ports[1], "irq %d", pdev->irq); } else { if (!ata_port_is_dummy(host->ports[0])) { - host->irq = ATA_PRIMARY_IRQ(pdev); - rc = devm_request_irq(dev, host->irq, + rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); if (rc) goto err_out; + + ata_port_desc(host->ports[0], "irq %d", + ATA_PRIMARY_IRQ(pdev)); } if (!ata_port_is_dummy(host->ports[1])) { - host->irq2 = ATA_SECONDARY_IRQ(pdev); - rc = devm_request_irq(dev, host->irq2, + rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev), pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); if (rc) goto err_out; + + ata_port_desc(host->ports[1], "irq %d", + ATA_SECONDARY_IRQ(pdev)); } } Index: work/drivers/ata/pata_cs5520.c =================================================================== --- work.orig/drivers/ata/pata_cs5520.c +++ work/drivers/ata/pata_cs5520.c @@ -191,6 +191,8 @@ static struct ata_port_operations cs5520 static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { + static const unsigned int cmd_port[] = { 0x1F0, 0x170 }; + static const unsigned int ctl_port[] = { 0x3F6, 0x376 }; struct ata_port_info pi = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, @@ -244,10 +246,10 @@ static int __devinit cs5520_init_one(str } /* Map IO ports and initialize host accordingly */ - iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8); - iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1); - iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8); - iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1); + iomap[0] = devm_ioport_map(&pdev->dev, cmd_port[0], 8); + iomap[1] = devm_ioport_map(&pdev->dev, ctl_port[0], 1); + iomap[2] = devm_ioport_map(&pdev->dev, cmd_port[1], 8); + iomap[3] = devm_ioport_map(&pdev->dev, ctl_port[1], 1); iomap[4] = pcim_iomap(pdev, 2, 0); if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4]) @@ -260,6 +262,10 @@ static int __devinit cs5520_init_one(str ioaddr->bmdma_addr = iomap[4]; ata_std_ports(ioaddr); + ata_port_desc(host->ports[0], + "cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]); + ata_port_pbar_desc(host->ports[0], 4, 0, "bmdma"); + ioaddr = &host->ports[1]->ioaddr; ioaddr->cmd_addr = iomap[2]; ioaddr->ctl_addr = iomap[3]; @@ -267,6 +273,10 @@ static int __devinit cs5520_init_one(str ioaddr->bmdma_addr = iomap[4] + 8; ata_std_ports(ioaddr); + ata_port_desc(host->ports[1], + "cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]); + ata_port_pbar_desc(host->ports[1], 4, 8, "bmdma"); + /* activate the host */ pci_set_master(pdev); rc = ata_host_start(host); @@ -285,10 +295,7 @@ static int __devinit cs5520_init_one(str if (rc) return rc; - if (i == 0) - host->irq = irq[0]; - else - host->irq2 = irq[1]; + ata_port_desc(ap, "irq %d", irq[i]); } return ata_host_register(host, &cs5520_sht); Index: work/drivers/ata/pata_hpt3x3.c =================================================================== --- work.orig/drivers/ata/pata_hpt3x3.c +++ work/drivers/ata/pata_hpt3x3.c @@ -239,7 +239,8 @@ static int hpt3x3_init_one(struct pci_de base = host->iomap[4]; /* Bus mastering base */ for (i = 0; i < host->n_ports; i++) { - struct ata_ioports *ioaddr = &host->ports[i]->ioaddr; + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; ioaddr->cmd_addr = base + offset_cmd[i]; ioaddr->altstatus_addr = @@ -247,6 +248,9 @@ static int hpt3x3_init_one(struct pci_de ioaddr->scr_addr = NULL; ata_std_ports(ioaddr); ioaddr->bmdma_addr = base + 8 * i; + + ata_port_pbar_desc(ap, 4, -1, "ioport"); + ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd"); } pci_set_master(pdev); return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, Index: work/drivers/ata/pata_icside.c =================================================================== --- work.orig/drivers/ata/pata_icside.c +++ work/drivers/ata/pata_icside.c @@ -70,6 +70,8 @@ struct pata_icside_info { unsigned int mwdma_mask; unsigned int nr_ports; const struct portinfo *port[2]; + unsigned long raw_base; + unsigned long raw_ioc_base; }; #define ICS_TYPE_A3IN 0 @@ -411,9 +413,10 @@ static struct ata_port_operations pata_i }; static void __devinit -pata_icside_setup_ioaddr(struct ata_ioports *ioaddr, void __iomem *base, +pata_icside_setup_ioaddr(struct ata_port *ap, void __iomem *base, const struct portinfo *info) { + struct ata_ioports *ioaddr = &ap->ioaddr; void __iomem *cmd = base + info->dataoffset; ioaddr->cmd_addr = cmd; @@ -430,6 +433,13 @@ pata_icside_setup_ioaddr(struct ata_iopo ioaddr->ctl_addr = base + info->ctrloffset; ioaddr->altstatus_addr = ioaddr->ctl_addr; + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", + info->raw_base + info->dataoffset, + info->raw_base + info->ctrloffset); + + if (info->raw_ioc_base) + ata_port_desc(ap, "iocbase 0x%lx", info->raw_ioc_base); } static int __devinit pata_icside_register_v5(struct pata_icside_info *info) @@ -450,6 +460,8 @@ static int __devinit pata_icside_registe info->nr_ports = 1; info->port[0] = &pata_icside_portinfo_v5; + info->raw_base = ecard_resource_start(ec, ECARD_RES_MEMC); + return 0; } @@ -497,6 +509,9 @@ static int __devinit pata_icside_registe info->port[0] = &pata_icside_portinfo_v6_1; info->port[1] = &pata_icside_portinfo_v6_2; + info->raw_base = ecard_resource_start(ec, ECARD_RES_EASI); + info->raw_ioc_base = ecard_resource_start(ec, ECARD_RES_IOCFAST); + return icside_dma_init(info); } @@ -533,7 +548,7 @@ static int __devinit pata_icside_add_por ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ops = &pata_icside_port_ops; - pata_icside_setup_ioaddr(&ap->ioaddr, info->base, info->port[i]); + pata_icside_setup_ioaddr(ap, info->base, info->port[i]); } return ata_host_activate(host, ec->irq, ata_interrupt, 0, Index: work/drivers/ata/pata_isapnp.c =================================================================== --- work.orig/drivers/ata/pata_isapnp.c +++ work/drivers/ata/pata_isapnp.c @@ -112,6 +112,10 @@ static int isapnp_init_one(struct pnp_de ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pnp_port_start(idev, 0), + (unsigned long long)pnp_port_start(idev, 1)); + /* activate */ return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0, &isapnp_sht); Index: work/drivers/ata/pata_ixp4xx_cf.c =================================================================== --- work.orig/drivers/ata/pata_ixp4xx_cf.c +++ work/drivers/ata/pata_ixp4xx_cf.c @@ -134,8 +134,12 @@ static struct ata_port_operations ixp4xx }; static void ixp4xx_setup_port(struct ata_ioports *ioaddr, - struct ixp4xx_pata_data *data) + struct ixp4xx_pata_data *data, + unsigned long raw_cs0, unsigned long raw_cs1) { + unsigned long raw_cmd = raw_cs0; + unsigned long raw_ctl = raw_cs1 + 0x06; + ioaddr->cmd_addr = data->cs0; ioaddr->altstatus_addr = data->cs1 + 0x06; ioaddr->ctl_addr = data->cs1 + 0x06; @@ -161,7 +165,12 @@ static void ixp4xx_setup_port(struct ata *(unsigned long *)&ioaddr->device_addr ^= 0x03; *(unsigned long *)&ioaddr->status_addr ^= 0x03; *(unsigned long *)&ioaddr->command_addr ^= 0x03; + + raw_cmd ^= 0x03; + raw_ctl ^= 0x03; #endif + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl); } static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) @@ -203,7 +212,7 @@ static __devinit int ixp4xx_pata_probe(s ap->pio_mask = 0x1f; /* PIO4 */ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI; - ixp4xx_setup_port(&ap->ioaddr, data); + ixp4xx_setup_port(ap, data, cs0->start, cs1->start); dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); Index: work/drivers/ata/pata_legacy.c =================================================================== --- work.orig/drivers/ata/pata_legacy.c +++ work/drivers/ata/pata_legacy.c @@ -814,6 +814,8 @@ static __init int legacy_init_one(int po ata_std_ports(&ap->ioaddr); ap->private_data = ld; + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl); + ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht); if (ret) goto fail; Index: work/drivers/ata/pata_mpc52xx.c =================================================================== --- work.orig/drivers/ata/pata_mpc52xx.c +++ work/drivers/ata/pata_mpc52xx.c @@ -304,7 +304,8 @@ static struct ata_port_operations mpc52x }; static int __devinit -mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv) +mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv, + unsigned long raw_ata_regs) { struct ata_host *host; struct ata_port *ap; @@ -338,6 +339,8 @@ mpc52xx_ata_init_one(struct device *dev, aio->status_addr = &priv->ata_regs->tf_command; aio->command_addr = &priv->ata_regs->tf_command; + ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs); + /* activate host */ return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0, &mpc52xx_ata_sht); @@ -434,7 +437,7 @@ mpc52xx_ata_probe(struct of_device *op, } /* Register ourselves to libata */ - rv = mpc52xx_ata_init_one(&op->dev, priv); + rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start); if (rv) { printk(KERN_ERR DRV_NAME ": " "Error while registering to ATA layer\n"); Index: work/drivers/ata/pata_mpiix.c =================================================================== --- work.orig/drivers/ata/pata_mpiix.c +++ work/drivers/ata/pata_mpiix.c @@ -202,7 +202,7 @@ static int mpiix_init_one(struct pci_dev struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; u16 idetim; - int irq; + int cmd, ctl, irq; if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); @@ -210,6 +210,7 @@ static int mpiix_init_one(struct pci_dev host = ata_host_alloc(&dev->dev, 1); if (!host) return -ENOMEM; + ap = host->ports[0]; /* MPIIX has many functions which can be turned on or off according to other devices present. Make sure IDE is enabled before we try @@ -221,25 +222,28 @@ static int mpiix_init_one(struct pci_dev /* See if it's primary or secondary channel... */ if (!(idetim & SECONDARY)) { + cmd = 0x1F0; + ctl = 0x3F6; irq = 14; - cmd_addr = devm_ioport_map(&dev->dev, 0x1F0, 8); - ctl_addr = devm_ioport_map(&dev->dev, 0x3F6, 1); } else { + cmd = 0x170; + ctl = 0x376; irq = 15; - cmd_addr = devm_ioport_map(&dev->dev, 0x170, 8); - ctl_addr = devm_ioport_map(&dev->dev, 0x376, 1); } + cmd_addr = devm_ioport_map(&dev->dev, cmd, 8); + ctl_addr = devm_ioport_map(&dev->dev, ctl, 1); if (!cmd_addr || !ctl_addr) return -ENOMEM; + ata_port_desc(ap, "cmd 0x%x ctl 0x%x", cmd, ctl); + /* We do our own plumbing to avoid leaking special cases for whacko ancient hardware into the core code. There are two issues to worry about. #1 The chip is a bridge so if in legacy mode and without BARs set fools the setup. #2 If you pci_disable_device the MPIIX your box goes castors up */ - ap = host->ports[0]; ap->ops = &mpiix_port_ops; ap->pio_mask = 0x1F; ap->flags |= ATA_FLAG_SLAVE_POSS; Index: work/drivers/ata/pata_pcmcia.c =================================================================== --- work.orig/drivers/ata/pata_pcmcia.c +++ work/drivers/ata/pata_pcmcia.c @@ -304,6 +304,8 @@ next_entry: ap->ioaddr.ctl_addr = ctl_addr; ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + /* activate */ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt, IRQF_SHARED, &pcmcia_sht); Index: work/drivers/ata/pata_pdc2027x.c =================================================================== --- work.orig/drivers/ata/pata_pdc2027x.c +++ work/drivers/ata/pata_pdc2027x.c @@ -791,12 +791,14 @@ static void pdc_ata_setup_port(struct at static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; + static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 }; + static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 }; unsigned int board_idx = (unsigned int) ent->driver_data; const struct ata_port_info *ppi[] = { &pdc2027x_port_info[board_idx], NULL }; struct ata_host *host; void __iomem *mmio_base; - int rc; + int i, rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -826,10 +828,15 @@ static int __devinit pdc2027x_init_one(s mmio_base = host->iomap[PDC_MMIO_BAR]; - pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0); - host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000; - pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0); - host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008; + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + + pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]); + ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i]; + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd"); + } //pci_enable_intx(pdev); Index: work/drivers/ata/pata_platform.c =================================================================== --- work.orig/drivers/ata/pata_platform.c +++ work/drivers/ata/pata_platform.c @@ -212,6 +212,10 @@ static int __devinit pata_platform_probe pp_info = (struct pata_platform_info *)(pdev->dev.platform_data); pata_platform_setup_port(&ap->ioaddr, pp_info); + ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport", + (unsigned long long)io_res->start, + (unsigned long long)ctl_res->start); + /* activate */ return ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt, pp_info ? pp_info->irq_flags Index: work/drivers/ata/pata_qdi.c =================================================================== --- work.orig/drivers/ata/pata_qdi.c +++ work/drivers/ata/pata_qdi.c @@ -238,6 +238,7 @@ static struct ata_port_operations qdi658 static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) { + unsigned long ctl = io + 0x206; struct platform_device *pdev; struct ata_host *host; struct ata_port *ap; @@ -254,7 +255,7 @@ static __init int qdi_init_one(unsigned ret = -ENOMEM; io_addr = devm_ioport_map(&pdev->dev, io, 8); - ctl_addr = devm_ioport_map(&pdev->dev, io + 0x206, 1); + ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1); if (!io_addr || !ctl_addr) goto fail; @@ -279,6 +280,8 @@ static __init int qdi_init_one(unsigned ap->ioaddr.ctl_addr = ctl_addr; ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl); + /* * Hook in a private data structure per channel */ Index: work/drivers/ata/pata_scc.c =================================================================== --- work.orig/drivers/ata/pata_scc.c +++ work/drivers/ata/pata_scc.c @@ -1193,6 +1193,9 @@ static int scc_init_one (struct pci_dev return rc; host->iomap = pcim_iomap_table(pdev); + ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl"); + ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid"); + rc = scc_host_init(host); if (rc) return rc; Index: work/drivers/ata/pata_winbond.c =================================================================== --- work.orig/drivers/ata/pata_winbond.c +++ work/drivers/ata/pata_winbond.c @@ -199,6 +199,7 @@ static __init int winbond_init_one(unsig for (i = 0; i < 2 ; i ++) { unsigned long cmd_port = 0x1F0 - (0x80 * i); + unsigned long ctl_port = cmd_port + 0x206; struct ata_host *host; struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; @@ -214,14 +215,16 @@ static __init int winbond_init_one(unsig host = ata_host_alloc(&pdev->dev, 1); if (!host) goto err_unregister; + ap = host->ports[0]; rc = -ENOMEM; cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8); - ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1); + ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1); if (!cmd_addr || !ctl_addr) goto err_unregister; - ap = host->ports[0]; + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); + ap->ops = &winbond_port_ops; ap->pio_mask = 0x1F; ap->flags |= ATA_FLAG_SLAVE_POSS; Index: work/drivers/ata/pdc_adma.c =================================================================== --- work.orig/drivers/ata/pdc_adma.c +++ work/drivers/ata/pdc_adma.c @@ -652,9 +652,16 @@ static int adma_ata_init_one(struct pci_ if (rc) return rc; - for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_ata_setup_port(&host->ports[port_no]->ioaddr, - ADMA_ATA_REGS(mmio_base, port_no)); + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) { + struct ata_port *ap = host->ports[port_no]; + void __iomem *port_base = ADMA_ATA_REGS(mmio_base, port_no); + unsigned int offset = port_base - mmio_base; + + adma_ata_setup_port(&ap->ioaddr, port_base); + + ata_port_pbar_desc(ap, ADMA_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, ADMA_MMIO_BAR, offset, "port"); + } /* initialize adapter */ adma_host_init(host, board_idx); Index: work/drivers/ata/sata_inic162x.c =================================================================== --- work.orig/drivers/ata/sata_inic162x.c +++ work/drivers/ata/sata_inic162x.c @@ -693,16 +693,24 @@ static int inic_init_one(struct pci_dev host->iomap = iomap = pcim_iomap_table(pdev); for (i = 0; i < NR_PORTS; i++) { - struct ata_ioports *port = &host->ports[i]->ioaddr; - void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE; + struct ata_port *ap = host->ports[i]; + struct ata_ioports *port = &ap->ioaddr; + unsigned int offset = i * PORT_SIZE; port->cmd_addr = iomap[2 * i]; port->altstatus_addr = port->ctl_addr = (void __iomem *) ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS); - port->scr_addr = port_base + PORT_SCR; + port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR; ata_std_ports(port); + + ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MMIO_BAR, offset, "port"); + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pci_resource_start(pdev, 2 * i), + (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) | + ATA_PCI_CTL_OFS); } hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL); Index: work/drivers/ata/sata_mv.c =================================================================== --- work.orig/drivers/ata/sata_mv.c +++ work/drivers/ata/sata_mv.c @@ -2563,8 +2563,14 @@ static int mv_init_host(struct ata_host } for (port = 0; port < host->n_ports; port++) { + struct ata_port *ap = host->ports[port]; void __iomem *port_mmio = mv_port_base(mmio, port); - mv_port_init(&host->ports[port]->ioaddr, port_mmio); + unsigned int offset = port_mmio - mmio; + + mv_port_init(&ap->ioaddr, port_mmio); + + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); } for (hc = 0; hc < n_hc; hc++) { Index: work/drivers/ata/sata_promise.c =================================================================== --- work.orig/drivers/ata/sata_promise.c +++ work/drivers/ata/sata_promise.c @@ -1009,10 +1009,15 @@ static int pdc_ata_init_one (struct pci_ is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags); for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4); - pdc_ata_setup_port(host->ports[i], - base + 0x200 + ata_no * 0x80, - base + 0x400 + ata_no * 0x100); + unsigned int port_offset = 0x200 + ata_no * 0x80; + unsigned int scr_offset = 0x400 + ata_no * 0x100; + + pdc_ata_setup_port(ap, base + port_offset, base + scr_offset); + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, port_offset, "port"); } /* initialize adapter */ Index: work/drivers/ata/sata_qstor.c =================================================================== --- work.orig/drivers/ata/sata_qstor.c +++ work/drivers/ata/sata_qstor.c @@ -637,9 +637,14 @@ static int qs_ata_init_one(struct pci_de return rc; for (port_no = 0; port_no < host->n_ports; ++port_no) { - void __iomem *chan = - host->iomap[QS_MMIO_BAR] + (port_no * 0x4000); - qs_ata_setup_port(&host->ports[port_no]->ioaddr, chan); + struct ata_port *ap = host->ports[port_no]; + unsigned int offset = port_no * 0x4000; + void __iomem *chan = host->iomap[QS_MMIO_BAR] + offset; + + qs_ata_setup_port(&ap->ioaddr, chan); + + ata_port_pbar_desc(ap, QS_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, QS_MMIO_BAR, offset, "port"); } /* initialize adapter */ Index: work/drivers/ata/sata_sil.c =================================================================== --- work.orig/drivers/ata/sata_sil.c +++ work/drivers/ata/sata_sil.c @@ -686,7 +686,8 @@ static int sil_init_one (struct pci_dev mmio_base = host->iomap[SIL_MMIO_BAR]; for (i = 0; i < host->n_ports; i++) { - struct ata_ioports *ioaddr = &host->ports[i]->ioaddr; + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; ioaddr->cmd_addr = mmio_base + sil_port[i].tf; ioaddr->altstatus_addr = @@ -694,6 +695,9 @@ static int sil_init_one (struct pci_dev ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma; ioaddr->scr_addr = mmio_base + sil_port[i].scr; ata_std_ports(ioaddr); + + ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf"); } /* initialize and activate */ Index: work/drivers/ata/sata_sil24.c =================================================================== --- work.orig/drivers/ata/sata_sil24.c +++ work/drivers/ata/sata_sil24.c @@ -1110,12 +1110,15 @@ static int sil24_init_one(struct pci_dev host->iomap = iomap; for (i = 0; i < host->n_ports; i++) { - void __iomem *port = iomap[SIL24_PORT_BAR] + i * PORT_REGS_SIZE; + struct ata_port *ap = host->ports[i]; + size_t offset = ap->port_no * PORT_REGS_SIZE; + void __iomem *port = iomap[SIL24_PORT_BAR] + offset; host->ports[i]->ioaddr.cmd_addr = port; host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL; - ata_std_ports(&host->ports[i]->ioaddr); + ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host"); + ata_port_pbar_desc(ap, SIL24_PORT_BAR, offset, "port"); } /* configure and activate the device */ Index: work/drivers/ata/sata_svw.c =================================================================== --- work.orig/drivers/ata/sata_svw.c +++ work/drivers/ata/sata_svw.c @@ -445,9 +445,15 @@ static int k2_sata_init_one (struct pci_ /* different controllers have different number of ports - currently 4 or 8 */ /* All ports are on the same function. Multi-function device is no * longer available. This should not be seen in any system. */ - for (i = 0; i < host->n_ports; i++) - k2_sata_setup_port(&host->ports[i]->ioaddr, - mmio_base + i * K2_SATA_PORT_OFFSET); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int offset = i * K2_SATA_PORT_OFFSET; + + k2_sata_setup_port(&ap->ioaddr, mmio_base + offset); + + ata_port_pbar_desc(ap, 5, -1, "mmio"); + ata_port_pbar_desc(ap, 5, offset, "port"); + } rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) Index: work/drivers/ata/sata_sx4.c =================================================================== --- work.orig/drivers/ata/sata_sx4.c +++ work/drivers/ata/sata_sx4.c @@ -1383,9 +1383,8 @@ static int pdc_sata_init_one (struct pci const struct ata_port_info *ppi[] = { &pdc_port_info[ent->driver_data], NULL }; struct ata_host *host; - void __iomem *base; struct pdc_host_priv *hpriv; - int rc; + int i, rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -1411,11 +1410,17 @@ static int pdc_sata_init_one (struct pci return rc; host->iomap = pcim_iomap_table(pdev); - base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; - pdc_sata_setup_port(&host->ports[0]->ioaddr, base + 0x200); - pdc_sata_setup_port(&host->ports[1]->ioaddr, base + 0x280); - pdc_sata_setup_port(&host->ports[2]->ioaddr, base + 0x300); - pdc_sata_setup_port(&host->ports[3]->ioaddr, base + 0x380); + for (i = 0; i < 4; i++) { + struct ata_port *ap = host->ports[i]; + void __iomem *base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; + unsigned int offset = 0x200 + i * 0x80; + + pdc_sata_setup_port(&ap->ioaddr, base + offset); + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_DIMM_BAR, -1, "dimm"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, offset, "port"); + } /* configure and activate */ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); Index: work/drivers/ata/sata_uli.c =================================================================== --- work.orig/drivers/ata/sata_uli.c +++ work/drivers/ata/sata_uli.c @@ -242,6 +242,12 @@ static int uli_init_one (struct pci_dev hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; ata_std_ports(ioaddr); + ata_port_desc(host->ports[2], + "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 0) + 8, + ((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4, + (unsigned long long)pci_resource_start(pdev, 4) + 16); + ioaddr = &host->ports[3]->ioaddr; ioaddr->cmd_addr = iomap[2] + 8; ioaddr->altstatus_addr = @@ -250,6 +256,13 @@ static int uli_init_one (struct pci_dev ioaddr->bmdma_addr = iomap[4] + 24; hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; ata_std_ports(ioaddr); + + ata_port_desc(host->ports[2], + "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 2) + 9, + ((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4, + (unsigned long long)pci_resource_start(pdev, 4) + 24); + break; case uli_5289: Index: work/drivers/ata/sata_via.c =================================================================== --- work.orig/drivers/ata/sata_via.c +++ work/drivers/ata/sata_via.c @@ -407,6 +407,9 @@ static void vt6421_init_addrs(struct ata ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no); ata_std_ports(ioaddr); + + ata_port_pbar_desc(ap, ap->port_no, -1, "port"); + ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma"); } static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) Index: work/drivers/ata/sata_vsc.c =================================================================== --- work.orig/drivers/ata/sata_vsc.c +++ work/drivers/ata/sata_vsc.c @@ -408,9 +408,15 @@ static int __devinit vsc_sata_init_one ( mmio_base = host->iomap[VSC_MMIO_BAR]; - for (i = 0; i < host->n_ports; i++) - vsc_sata_setup_port(&host->ports[i]->ioaddr, - mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET; + + vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset); + + ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port"); + } /* * Use 32 bit DMA mask, because 64 bit address support is poor. Index: work/include/linux/libata.h =================================================================== --- work.orig/include/linux/libata.h +++ work/include/linux/libata.h @@ -360,8 +360,6 @@ struct ata_ioports { struct ata_host { spinlock_t lock; struct device *dev; - unsigned long irq; - unsigned long irq2; void __iomem * const *iomap; unsigned int n_ports; void *private_data; @@ -935,6 +933,16 @@ static inline void ata_ehi_hotplugged(st } /* + * port description helpers + */ +extern void ata_port_desc(struct ata_port *ap, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); +#ifdef CONFIG_PCI +extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, + const char *name); +#endif + +/* * qc helpers */ static inline int ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration 2007-07-30 5:25 ` [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration Tejun Heo @ 2007-07-30 12:55 ` Alan Cox 2007-08-15 8:48 ` Jeff Garzik 1 sibling, 0 replies; 8+ messages in thread From: Alan Cox @ 2007-07-30 12:55 UTC (permalink / raw) To: Tejun Heo; +Cc: Jeff Garzik, linux-ide > SFF init helpers and ata_host_activate() automatically add > descriptions for addresses and irq respectively, so only LLDs which > isn't standard SFF need to add custom descriptions. In many cases, > such controllers need to report different things anyway. > > Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Alan Cox <alan@redhat.com> I believe this is better than the solution I proposed. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration 2007-07-30 5:25 ` [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration Tejun Heo 2007-07-30 12:55 ` Alan Cox @ 2007-08-15 8:48 ` Jeff Garzik 2007-08-18 4:14 ` [PATCH libata-dev#upstream 3/3 REGENERATED] " Tejun Heo 1 sibling, 1 reply; 8+ messages in thread From: Jeff Garzik @ 2007-08-15 8:48 UTC (permalink / raw) To: Tejun Heo; +Cc: Alan Cox, linux-ide Tejun Heo wrote: > Currently, port configuration reporting has the following problems. > > * iomapped address is reported instead of raw address > * report contains irrelevant fields or lacks necessary fields for > non-SFF controllers. > * host->irq/irq2 are there just for reporting and hacky. > > This patch implements and uses ata_port_desc() and > ata_port_pbar_desc(). ata_port_desc() is almost identical to > ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no > locking requirement, can only be used during host initialization and " > " is used as separator instead of ", ". ata_port_pbar_desc() is a > helper to ease reporting of a PCI BAR or an offsetted address into it. > > LLD pushes whatever description it wants using the above two > functions. The accumulated description is printed on host > registration after "[S/P]ATA max MAX_XFERMODE ". > > SFF init helpers and ata_host_activate() automatically add > descriptions for addresses and irq respectively, so only LLDs which > isn't standard SFF need to add custom descriptions. In many cases, > such controllers need to report different things anyway. > > Signed-off-by: Tejun Heo <htejun@gmail.com> > --- > pata_hpt3x3 fixed as pointed out by Alan. > > drivers/ata/ahci.c | 4 ++ > drivers/ata/libata-core.c | 27 +++++++---------- > drivers/ata/libata-eh.c | 67 +++++++++++++++++++++++++++++++++++++++++++ > drivers/ata/libata-sff.c | 23 +++++++++++--- > drivers/ata/pata_cs5520.c | 23 +++++++++----- > drivers/ata/pata_hpt3x3.c | 6 +++ > drivers/ata/pata_icside.c | 19 ++++++++++-- > drivers/ata/pata_isapnp.c | 4 ++ > drivers/ata/pata_ixp4xx_cf.c | 13 +++++++- > drivers/ata/pata_legacy.c | 2 + > drivers/ata/pata_mpc52xx.c | 7 +++- > drivers/ata/pata_mpiix.c | 16 ++++++---- > drivers/ata/pata_pcmcia.c | 2 + > drivers/ata/pata_pdc2027x.c | 17 +++++++--- > drivers/ata/pata_platform.c | 4 ++ > drivers/ata/pata_qdi.c | 5 ++- > drivers/ata/pata_scc.c | 3 + > drivers/ata/pata_winbond.c | 7 +++- > drivers/ata/pdc_adma.c | 13 ++++++-- > drivers/ata/sata_inic162x.c | 14 +++++++- > drivers/ata/sata_mv.c | 8 ++++- > drivers/ata/sata_promise.c | 11 +++++-- > drivers/ata/sata_qstor.c | 11 +++++-- > drivers/ata/sata_sil.c | 6 +++ > drivers/ata/sata_sil24.c | 7 +++- > drivers/ata/sata_svw.c | 12 +++++-- > drivers/ata/sata_sx4.c | 19 +++++++----- > drivers/ata/sata_uli.c | 13 ++++++++ > drivers/ata/sata_via.c | 3 + > drivers/ata/sata_vsc.c | 12 +++++-- > include/linux/libata.h | 12 ++++++- > 31 files changed, 309 insertions(+), 81 deletions(-) ACK, request rediff once #upstream mirrors out ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH libata-dev#upstream 3/3 REGENERATED] libata: implement and use ata_port_desc() to report port configuration 2007-08-15 8:48 ` Jeff Garzik @ 2007-08-18 4:14 ` Tejun Heo 2007-08-31 9:35 ` Jeff Garzik 0 siblings, 1 reply; 8+ messages in thread From: Tejun Heo @ 2007-08-18 4:14 UTC (permalink / raw) To: Jeff Garzik; +Cc: Alan Cox, linux-ide Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> --- Regenerated against the current #upstream (41b135c7). drivers/ata/ahci.c | 4 ++ drivers/ata/libata-core.c | 27 +++++++---------- drivers/ata/libata-eh.c | 67 +++++++++++++++++++++++++++++++++++++++++++ drivers/ata/libata-sff.c | 23 +++++++++++--- drivers/ata/pata_cs5520.c | 23 +++++++++----- drivers/ata/pata_hpt3x3.c | 6 +++ drivers/ata/pata_icside.c | 19 ++++++++++-- drivers/ata/pata_isapnp.c | 4 ++ drivers/ata/pata_ixp4xx_cf.c | 13 +++++++- drivers/ata/pata_legacy.c | 2 + drivers/ata/pata_mpc52xx.c | 7 +++- drivers/ata/pata_mpiix.c | 16 ++++++---- drivers/ata/pata_pcmcia.c | 2 + drivers/ata/pata_pdc2027x.c | 17 +++++++--- drivers/ata/pata_platform.c | 4 ++ drivers/ata/pata_qdi.c | 5 ++- drivers/ata/pata_scc.c | 3 + drivers/ata/pata_winbond.c | 7 +++- drivers/ata/pdc_adma.c | 13 ++++++-- drivers/ata/sata_inic162x.c | 14 +++++++- drivers/ata/sata_mv.c | 8 ++++- drivers/ata/sata_promise.c | 11 +++++-- drivers/ata/sata_qstor.c | 11 +++++-- drivers/ata/sata_sil.c | 6 +++ drivers/ata/sata_sil24.c | 7 +++- drivers/ata/sata_svw.c | 12 +++++-- drivers/ata/sata_sx4.c | 19 +++++++----- drivers/ata/sata_uli.c | 13 ++++++++ drivers/ata/sata_via.c | 3 + drivers/ata/sata_vsc.c | 12 +++++-- include/linux/libata.h | 12 ++++++- 31 files changed, 309 insertions(+), 81 deletions(-) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index fe9dfa3..cba6168 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1885,6 +1885,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct ata_port *ap = host->ports[i]; void __iomem *port_mmio = ahci_port_base(ap); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar"); + ata_port_pbar_desc(ap, AHCI_PCI_BAR, + 0x100 + ap->port_no * 0x80, "port"); + /* standard SATA port setup */ if (hpriv->port_map & (1 << i)) ap->ioaddr.cmd_addr = port_mmio; diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 735f74b..f3d1e0f 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6510,7 +6510,6 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* set cable, sata_spd_limit and report */ for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; - int irq_line; unsigned long xfer_mask; /* set SATA cable type if still unset */ @@ -6520,24 +6519,16 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) /* init sata_spd_limit to the current value */ sata_link_init_spd(&ap->link); - /* report the secondary IRQ for second channel legacy */ - irq_line = host->irq; - if (i == 1 && host->irq2) - irq_line = host->irq2; - + /* print per-port info to dmesg */ xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, ap->udma_mask); - /* print per-port info to dmesg */ if (!ata_port_is_dummy(ap)) - ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%p " - "ctl 0x%p bmdma 0x%p irq %d\n", + ata_port_printk(ap, KERN_INFO, + "%cATA max %s %s\n", (ap->flags & ATA_FLAG_SATA) ? 'S' : 'P', ata_mode_string(xfer_mask), - ap->ioaddr.cmd_addr, - ap->ioaddr.ctl_addr, - ap->ioaddr.bmdma_addr, - irq_line); + ap->link.eh_info.desc); else ata_port_printk(ap, KERN_INFO, "DUMMY\n"); } @@ -6621,7 +6612,7 @@ int ata_host_activate(struct ata_host *host, int irq, irq_handler_t irq_handler, unsigned long irq_flags, struct scsi_host_template *sht) { - int rc; + int i, rc; rc = ata_host_start(host); if (rc) @@ -6632,8 +6623,8 @@ int ata_host_activate(struct ata_host *host, int irq, if (rc) return rc; - /* Used to print device info at probe */ - host->irq = irq; + for (i = 0; i < host->n_ports; i++) + ata_port_desc(host->ports[i], "irq %d", irq); rc = ata_host_register(host, sht); /* if failed, just free the IRQ and leave ports alone */ @@ -7105,6 +7096,10 @@ EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); EXPORT_SYMBOL_GPL(__ata_ehi_push_desc); EXPORT_SYMBOL_GPL(ata_ehi_push_desc); EXPORT_SYMBOL_GPL(ata_ehi_clear_desc); +EXPORT_SYMBOL_GPL(ata_port_desc); +#ifdef CONFIG_PCI +EXPORT_SYMBOL_GPL(ata_port_pbar_desc); +#endif /* CONFIG_PCI */ EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_port_schedule_eh); EXPORT_SYMBOL_GPL(ata_link_abort); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index 2ddc2ed..8219e2d 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -151,6 +151,73 @@ void ata_ehi_clear_desc(struct ata_eh_info *ehi) ehi->desc_len = 0; } +/** + * ata_port_desc - append port description + * @ap: target ATA port + * @fmt: printf format string + * + * Format string according to @fmt and append it to port + * description. If port description is not empty, " " is added + * in-between. This function is to be used while initializing + * ata_host. The description is printed on host registration. + * + * LOCKING: + * None. + */ +void ata_port_desc(struct ata_port *ap, const char *fmt, ...) +{ + va_list args; + + WARN_ON(!(ap->pflags & ATA_PFLAG_INITIALIZING)); + + if (ap->link.eh_info.desc_len) + __ata_ehi_push_desc(&ap->link.eh_info, " "); + + va_start(args, fmt); + __ata_ehi_pushv_desc(&ap->link.eh_info, fmt, args); + va_end(args); +} + +#ifdef CONFIG_PCI + +/** + * ata_port_pbar_desc - append PCI BAR description + * @ap: target ATA port + * @bar: target PCI BAR + * @offset: offset into PCI BAR + * @name: name of the area + * + * If @offset is negative, this function formats a string which + * contains the name, address, size and type of the BAR and + * appends it to the port description. If @offset is zero or + * positive, only name and offsetted address is appended. + * + * LOCKING: + * None. + */ +void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, + const char *name) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + char *type = ""; + unsigned long long start, len; + + if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) + type = "m"; + else if (pci_resource_flags(pdev, bar) & IORESOURCE_IO) + type = "i"; + + start = (unsigned long long)pci_resource_start(pdev, bar); + len = (unsigned long long)pci_resource_len(pdev, bar); + + if (offset < 0) + ata_port_desc(ap, "%s %s%llu@0x%llx", name, type, len, start); + else + ata_port_desc(ap, "%s 0x%llx", name, start + offset); +} + +#endif /* CONFIG_PCI */ + static void ata_ering_record(struct ata_ering *ering, int is_io, unsigned int err_mask) { diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 9828404..37f019c 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -564,6 +564,9 @@ int ata_pci_init_bmdma(struct ata_host *host) if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) && (ioread8(bmdma + 2) & 0x80)) host->flags |= ATA_HOST_SIMPLEX; + + ata_port_desc(ap, "bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 4) + 8 * i); } return 0; @@ -631,6 +634,10 @@ int ata_pci_init_sff_host(struct ata_host *host) ((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS); ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pci_resource_start(pdev, base), + (unsigned long long)pci_resource_start(pdev, base + 1)); + mask |= 1 << i; } @@ -801,24 +808,30 @@ int ata_pci_init_one(struct pci_dev *pdev, IRQF_SHARED, DRV_NAME, host); if (rc) goto err_out; - host->irq = pdev->irq; + + ata_port_desc(host->ports[0], "irq %d", pdev->irq); + ata_port_desc(host->ports[1], "irq %d", pdev->irq); } else { if (!ata_port_is_dummy(host->ports[0])) { - host->irq = ATA_PRIMARY_IRQ(pdev); - rc = devm_request_irq(dev, host->irq, + rc = devm_request_irq(dev, ATA_PRIMARY_IRQ(pdev), pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); if (rc) goto err_out; + + ata_port_desc(host->ports[0], "irq %d", + ATA_PRIMARY_IRQ(pdev)); } if (!ata_port_is_dummy(host->ports[1])) { - host->irq2 = ATA_SECONDARY_IRQ(pdev); - rc = devm_request_irq(dev, host->irq2, + rc = devm_request_irq(dev, ATA_SECONDARY_IRQ(pdev), pi->port_ops->irq_handler, IRQF_SHARED, DRV_NAME, host); if (rc) goto err_out; + + ata_port_desc(host->ports[1], "irq %d", + ATA_SECONDARY_IRQ(pdev)); } } diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 5f06fcd..0d24160 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -189,6 +189,8 @@ static struct ata_port_operations cs5520_port_ops = { static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { + static const unsigned int cmd_port[] = { 0x1F0, 0x170 }; + static const unsigned int ctl_port[] = { 0x3F6, 0x376 }; struct ata_port_info pi = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, @@ -242,10 +244,10 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi } /* Map IO ports and initialize host accordingly */ - iomap[0] = devm_ioport_map(&pdev->dev, 0x1F0, 8); - iomap[1] = devm_ioport_map(&pdev->dev, 0x3F6, 1); - iomap[2] = devm_ioport_map(&pdev->dev, 0x170, 8); - iomap[3] = devm_ioport_map(&pdev->dev, 0x376, 1); + iomap[0] = devm_ioport_map(&pdev->dev, cmd_port[0], 8); + iomap[1] = devm_ioport_map(&pdev->dev, ctl_port[0], 1); + iomap[2] = devm_ioport_map(&pdev->dev, cmd_port[1], 8); + iomap[3] = devm_ioport_map(&pdev->dev, ctl_port[1], 1); iomap[4] = pcim_iomap(pdev, 2, 0); if (!iomap[0] || !iomap[1] || !iomap[2] || !iomap[3] || !iomap[4]) @@ -258,6 +260,10 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi ioaddr->bmdma_addr = iomap[4]; ata_std_ports(ioaddr); + ata_port_desc(host->ports[0], + "cmd 0x%x ctl 0x%x", cmd_port[0], ctl_port[0]); + ata_port_pbar_desc(host->ports[0], 4, 0, "bmdma"); + ioaddr = &host->ports[1]->ioaddr; ioaddr->cmd_addr = iomap[2]; ioaddr->ctl_addr = iomap[3]; @@ -265,6 +271,10 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi ioaddr->bmdma_addr = iomap[4] + 8; ata_std_ports(ioaddr); + ata_port_desc(host->ports[1], + "cmd 0x%x ctl 0x%x", cmd_port[1], ctl_port[1]); + ata_port_pbar_desc(host->ports[1], 4, 8, "bmdma"); + /* activate the host */ pci_set_master(pdev); rc = ata_host_start(host); @@ -283,10 +293,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi if (rc) return rc; - if (i == 0) - host->irq = irq[0]; - else - host->irq2 = irq[1]; + ata_port_desc(ap, "irq %d", irq[i]); } return ata_host_register(host, &cs5520_sht); diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c index 752394b..873aa70 100644 --- a/drivers/ata/pata_hpt3x3.c +++ b/drivers/ata/pata_hpt3x3.c @@ -237,7 +237,8 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) base = host->iomap[4]; /* Bus mastering base */ for (i = 0; i < host->n_ports; i++) { - struct ata_ioports *ioaddr = &host->ports[i]->ioaddr; + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; ioaddr->cmd_addr = base + offset_cmd[i]; ioaddr->altstatus_addr = @@ -245,6 +246,9 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id) ioaddr->scr_addr = NULL; ata_std_ports(ioaddr); ioaddr->bmdma_addr = base + 8 * i; + + ata_port_pbar_desc(ap, 4, -1, "ioport"); + ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd"); } pci_set_master(pdev); return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index 4a69328..be30923 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -70,6 +70,8 @@ struct pata_icside_info { unsigned int mwdma_mask; unsigned int nr_ports; const struct portinfo *port[2]; + unsigned long raw_base; + unsigned long raw_ioc_base; }; #define ICS_TYPE_A3IN 0 @@ -392,9 +394,10 @@ static struct ata_port_operations pata_icside_port_ops = { }; static void __devinit -pata_icside_setup_ioaddr(struct ata_ioports *ioaddr, void __iomem *base, +pata_icside_setup_ioaddr(struct ata_port *ap, void __iomem *base, const struct portinfo *info) { + struct ata_ioports *ioaddr = &ap->ioaddr; void __iomem *cmd = base + info->dataoffset; ioaddr->cmd_addr = cmd; @@ -411,6 +414,13 @@ pata_icside_setup_ioaddr(struct ata_ioports *ioaddr, void __iomem *base, ioaddr->ctl_addr = base + info->ctrloffset; ioaddr->altstatus_addr = ioaddr->ctl_addr; + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", + info->raw_base + info->dataoffset, + info->raw_base + info->ctrloffset); + + if (info->raw_ioc_base) + ata_port_desc(ap, "iocbase 0x%lx", info->raw_ioc_base); } static int __devinit pata_icside_register_v5(struct pata_icside_info *info) @@ -431,6 +441,8 @@ static int __devinit pata_icside_register_v5(struct pata_icside_info *info) info->nr_ports = 1; info->port[0] = &pata_icside_portinfo_v5; + info->raw_base = ecard_resource_start(ec, ECARD_RES_MEMC); + return 0; } @@ -471,6 +483,9 @@ static int __devinit pata_icside_register_v6(struct pata_icside_info *info) info->port[0] = &pata_icside_portinfo_v6_1; info->port[1] = &pata_icside_portinfo_v6_2; + info->raw_base = ecard_resource_start(ec, ECARD_RES_EASI); + info->raw_ioc_base = ecard_resource_start(ec, ECARD_RES_IOCFAST); + return icside_dma_init(info); } @@ -507,7 +522,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info) ap->flags |= ATA_FLAG_SLAVE_POSS; ap->ops = &pata_icside_port_ops; - pata_icside_setup_ioaddr(&ap->ioaddr, info->base, info->port[i]); + pata_icside_setup_ioaddr(ap, info->base, info->port[i]); } return ata_host_activate(host, ec->irq, ata_interrupt, 0, diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 421e832..97bf45e 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -110,6 +110,10 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pnp_port_start(idev, 0), + (unsigned long long)pnp_port_start(idev, 1)); + /* activate */ return ata_host_activate(host, pnp_irq(idev, 0), ata_interrupt, 0, &isapnp_sht); diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index fb53869..4c3a817 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -131,8 +131,12 @@ static struct ata_port_operations ixp4xx_port_ops = { }; static void ixp4xx_setup_port(struct ata_ioports *ioaddr, - struct ixp4xx_pata_data *data) + struct ixp4xx_pata_data *data, + unsigned long raw_cs0, unsigned long raw_cs1) { + unsigned long raw_cmd = raw_cs0; + unsigned long raw_ctl = raw_cs1 + 0x06; + ioaddr->cmd_addr = data->cs0; ioaddr->altstatus_addr = data->cs1 + 0x06; ioaddr->ctl_addr = data->cs1 + 0x06; @@ -158,7 +162,12 @@ static void ixp4xx_setup_port(struct ata_ioports *ioaddr, *(unsigned long *)&ioaddr->device_addr ^= 0x03; *(unsigned long *)&ioaddr->status_addr ^= 0x03; *(unsigned long *)&ioaddr->command_addr ^= 0x03; + + raw_cmd ^= 0x03; + raw_ctl ^= 0x03; #endif + + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd, raw_ctl); } static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) @@ -200,7 +209,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) ap->pio_mask = 0x1f; /* PIO4 */ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI; - ixp4xx_setup_port(&ap->ioaddr, data); + ixp4xx_setup_port(ap, data, cs0->start, cs1->start); dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 6cae26f..7bed8d8 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -799,6 +799,8 @@ static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl ata_std_ports(&ap->ioaddr); ap->private_data = ld; + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl); + ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht); if (ret) goto fail; diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 0c62200..cf65961 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -302,7 +302,8 @@ static struct ata_port_operations mpc52xx_ata_port_ops = { }; static int __devinit -mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv) +mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv, + unsigned long raw_ata_regs) { struct ata_host *host; struct ata_port *ap; @@ -336,6 +337,8 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv) aio->status_addr = &priv->ata_regs->tf_command; aio->command_addr = &priv->ata_regs->tf_command; + ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs); + /* activate host */ return ata_host_activate(host, priv->ata_irq, ata_interrupt, 0, &mpc52xx_ata_sht); @@ -432,7 +435,7 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match) } /* Register ourselves to libata */ - rv = mpc52xx_ata_init_one(&op->dev, priv); + rv = mpc52xx_ata_init_one(&op->dev, priv, res_mem.start); if (rv) { printk(KERN_ERR DRV_NAME ": " "Error while registering to ATA layer\n"); diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c index b509109..a0a74bd 100644 --- a/drivers/ata/pata_mpiix.c +++ b/drivers/ata/pata_mpiix.c @@ -201,7 +201,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; u16 idetim; - int irq; + int cmd, ctl, irq; if (!printed_version++) dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); @@ -209,6 +209,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) host = ata_host_alloc(&dev->dev, 1); if (!host) return -ENOMEM; + ap = host->ports[0]; /* MPIIX has many functions which can be turned on or off according to other devices present. Make sure IDE is enabled before we try @@ -220,25 +221,28 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id) /* See if it's primary or secondary channel... */ if (!(idetim & SECONDARY)) { + cmd = 0x1F0; + ctl = 0x3F6; irq = 14; - cmd_addr = devm_ioport_map(&dev->dev, 0x1F0, 8); - ctl_addr = devm_ioport_map(&dev->dev, 0x3F6, 1); } else { + cmd = 0x170; + ctl = 0x376; irq = 15; - cmd_addr = devm_ioport_map(&dev->dev, 0x170, 8); - ctl_addr = devm_ioport_map(&dev->dev, 0x376, 1); } + cmd_addr = devm_ioport_map(&dev->dev, cmd, 8); + ctl_addr = devm_ioport_map(&dev->dev, ctl, 1); if (!cmd_addr || !ctl_addr) return -ENOMEM; + ata_port_desc(ap, "cmd 0x%x ctl 0x%x", cmd, ctl); + /* We do our own plumbing to avoid leaking special cases for whacko ancient hardware into the core code. There are two issues to worry about. #1 The chip is a bridge so if in legacy mode and without BARs set fools the setup. #2 If you pci_disable_device the MPIIX your box goes castors up */ - ap = host->ports[0]; ap->ops = &mpiix_port_ops; ap->pio_mask = 0x1F; ap->flags |= ATA_FLAG_SLAVE_POSS; diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 5a13ae8..bfb042e 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -302,6 +302,8 @@ next_entry: ap->ioaddr.ctl_addr = ctl_addr; ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io_base, ctl_base); + /* activate */ ret = ata_host_activate(host, pdev->irq.AssignedIRQ, ata_interrupt, IRQF_SHARED, &pcmcia_sht); diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index b153ffe..ccc08c9 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -787,12 +787,14 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base) static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; + static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 }; + static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 }; unsigned int board_idx = (unsigned int) ent->driver_data; const struct ata_port_info *ppi[] = { &pdc2027x_port_info[board_idx], NULL }; struct ata_host *host; void __iomem *mmio_base; - int rc; + int i, rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -822,10 +824,15 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de mmio_base = host->iomap[PDC_MMIO_BAR]; - pdc_ata_setup_port(&host->ports[0]->ioaddr, mmio_base + 0x17c0); - host->ports[0]->ioaddr.bmdma_addr = mmio_base + 0x1000; - pdc_ata_setup_port(&host->ports[1]->ioaddr, mmio_base + 0x15c0); - host->ports[1]->ioaddr.bmdma_addr = mmio_base + 0x1008; + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + + pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]); + ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i]; + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd"); + } //pci_enable_intx(pdev); diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index 80fdfe9..b9dac67 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -208,6 +208,10 @@ static int __devinit pata_platform_probe(struct platform_device *pdev) pp_info = pdev->dev.platform_data; pata_platform_setup_port(&ap->ioaddr, pp_info); + ata_port_desc(ap, "%s cmd 0x%llx ctl 0x%llx", mmio ? "mmio" : "ioport", + (unsigned long long)io_res->start, + (unsigned long long)ctl_res->start); + /* activate */ return ata_host_activate(host, platform_get_irq(pdev, 0), ata_interrupt, pp_info ? pp_info->irq_flags diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c index da9ccd2..8598c05 100644 --- a/drivers/ata/pata_qdi.c +++ b/drivers/ata/pata_qdi.c @@ -234,6 +234,7 @@ static struct ata_port_operations qdi6580_port_ops = { static __init int qdi_init_one(unsigned long port, int type, unsigned long io, int irq, int fast) { + unsigned long ctl = io + 0x206; struct platform_device *pdev; struct ata_host *host; struct ata_port *ap; @@ -250,7 +251,7 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i ret = -ENOMEM; io_addr = devm_ioport_map(&pdev->dev, io, 8); - ctl_addr = devm_ioport_map(&pdev->dev, io + 0x206, 1); + ctl_addr = devm_ioport_map(&pdev->dev, ctl, 1); if (!io_addr || !ctl_addr) goto fail; @@ -275,6 +276,8 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i ap->ioaddr.ctl_addr = ctl_addr; ata_std_ports(&ap->ioaddr); + ata_port_desc(ap, "cmd %lx ctl %lx", io, ctl); + /* * Hook in a private data structure per channel */ diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 59daf87..8e58bf9 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -1159,6 +1159,9 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return rc; host->iomap = pcim_iomap_table(pdev); + ata_port_pbar_desc(host->ports[0], SCC_CTRL_BAR, -1, "ctrl"); + ata_port_pbar_desc(host->ports[0], SCC_BMID_BAR, -1, "bmid"); + rc = scc_host_init(host); if (rc) return rc; diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c index d7555f7..7f8c72a 100644 --- a/drivers/ata/pata_winbond.c +++ b/drivers/ata/pata_winbond.c @@ -197,6 +197,7 @@ static __init int winbond_init_one(unsigned long port) for (i = 0; i < 2 ; i ++) { unsigned long cmd_port = 0x1F0 - (0x80 * i); + unsigned long ctl_port = cmd_port + 0x206; struct ata_host *host; struct ata_port *ap; void __iomem *cmd_addr, *ctl_addr; @@ -212,14 +213,16 @@ static __init int winbond_init_one(unsigned long port) host = ata_host_alloc(&pdev->dev, 1); if (!host) goto err_unregister; + ap = host->ports[0]; rc = -ENOMEM; cmd_addr = devm_ioport_map(&pdev->dev, cmd_port, 8); - ctl_addr = devm_ioport_map(&pdev->dev, cmd_port + 0x0206, 1); + ctl_addr = devm_ioport_map(&pdev->dev, ctl_port, 1); if (!cmd_addr || !ctl_addr) goto err_unregister; - ap = host->ports[0]; + ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port); + ap->ops = &winbond_port_ops; ap->pio_mask = 0x1F; ap->flags |= ATA_FLAG_SLAVE_POSS; diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index 1a88949..0bb0c93 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -704,9 +704,16 @@ static int adma_ata_init_one(struct pci_dev *pdev, if (rc) return rc; - for (port_no = 0; port_no < ADMA_PORTS; ++port_no) - adma_ata_setup_port(&host->ports[port_no]->ioaddr, - ADMA_ATA_REGS(mmio_base, port_no)); + for (port_no = 0; port_no < ADMA_PORTS; ++port_no) { + struct ata_port *ap = host->ports[port_no]; + void __iomem *port_base = ADMA_ATA_REGS(mmio_base, port_no); + unsigned int offset = port_base - mmio_base; + + adma_ata_setup_port(&ap->ioaddr, port_base); + + ata_port_pbar_desc(ap, ADMA_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, ADMA_MMIO_BAR, offset, "port"); + } /* initialize adapter */ adma_host_init(host, board_idx); diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 037a693..9261a30 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -693,16 +693,24 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = iomap = pcim_iomap_table(pdev); for (i = 0; i < NR_PORTS; i++) { - struct ata_ioports *port = &host->ports[i]->ioaddr; - void __iomem *port_base = iomap[MMIO_BAR] + i * PORT_SIZE; + struct ata_port *ap = host->ports[i]; + struct ata_ioports *port = &ap->ioaddr; + unsigned int offset = i * PORT_SIZE; port->cmd_addr = iomap[2 * i]; port->altstatus_addr = port->ctl_addr = (void __iomem *) ((unsigned long)iomap[2 * i + 1] | ATA_PCI_CTL_OFS); - port->scr_addr = port_base + PORT_SCR; + port->scr_addr = iomap[MMIO_BAR] + offset + PORT_SCR; ata_std_ports(port); + + ata_port_pbar_desc(ap, MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MMIO_BAR, offset, "port"); + ata_port_desc(ap, "cmd 0x%llx ctl 0x%llx", + (unsigned long long)pci_resource_start(pdev, 2 * i), + (unsigned long long)pci_resource_start(pdev, (2 * i + 1)) | + ATA_PCI_CTL_OFS); } hpriv->cached_hctl = readw(iomap[MMIO_BAR] + HOST_CTL); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 95d298b..a0a130f 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2560,8 +2560,14 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) } for (port = 0; port < host->n_ports; port++) { + struct ata_port *ap = host->ports[port]; void __iomem *port_mmio = mv_port_base(mmio, port); - mv_port_init(&host->ports[port]->ioaddr, port_mmio); + unsigned int offset = port_mmio - mmio; + + mv_port_init(&ap->ioaddr, port_mmio); + + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); } for (hc = 0; hc < n_hc; hc++) { diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index fca60d4..abcf156 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -1003,10 +1003,15 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags); for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4); - pdc_ata_setup_port(host->ports[i], - base + 0x200 + ata_no * 0x80, - base + 0x400 + ata_no * 0x100); + unsigned int port_offset = 0x200 + ata_no * 0x80; + unsigned int scr_offset = 0x400 + ata_no * 0x100; + + pdc_ata_setup_port(ap, base + port_offset, base + scr_offset); + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, port_offset, "port"); } /* initialize adapter */ diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index 340d28e..634c870 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -635,9 +635,14 @@ static int qs_ata_init_one(struct pci_dev *pdev, return rc; for (port_no = 0; port_no < host->n_ports; ++port_no) { - void __iomem *chan = - host->iomap[QS_MMIO_BAR] + (port_no * 0x4000); - qs_ata_setup_port(&host->ports[port_no]->ioaddr, chan); + struct ata_port *ap = host->ports[port_no]; + unsigned int offset = port_no * 0x4000; + void __iomem *chan = host->iomap[QS_MMIO_BAR] + offset; + + qs_ata_setup_port(&ap->ioaddr, chan); + + ata_port_pbar_desc(ap, QS_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, QS_MMIO_BAR, offset, "port"); } /* initialize adapter */ diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 214e019..dea5d3f 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -687,7 +687,8 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) mmio_base = host->iomap[SIL_MMIO_BAR]; for (i = 0; i < host->n_ports; i++) { - struct ata_ioports *ioaddr = &host->ports[i]->ioaddr; + struct ata_port *ap = host->ports[i]; + struct ata_ioports *ioaddr = &ap->ioaddr; ioaddr->cmd_addr = mmio_base + sil_port[i].tf; ioaddr->altstatus_addr = @@ -695,6 +696,9 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ioaddr->bmdma_addr = mmio_base + sil_port[i].bmdma; ioaddr->scr_addr = mmio_base + sil_port[i].scr; ata_std_ports(ioaddr); + + ata_port_pbar_desc(ap, SIL_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, SIL_MMIO_BAR, sil_port[i].tf, "tf"); } /* initialize and activate */ diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 42c8209..08ad478 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -1111,12 +1111,15 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) host->iomap = iomap; for (i = 0; i < host->n_ports; i++) { - void __iomem *port = iomap[SIL24_PORT_BAR] + i * PORT_REGS_SIZE; + struct ata_port *ap = host->ports[i]; + size_t offset = ap->port_no * PORT_REGS_SIZE; + void __iomem *port = iomap[SIL24_PORT_BAR] + offset; host->ports[i]->ioaddr.cmd_addr = port; host->ports[i]->ioaddr.scr_addr = port + PORT_SCONTROL; - ata_std_ports(&host->ports[i]->ioaddr); + ata_port_pbar_desc(ap, SIL24_HOST_BAR, -1, "host"); + ata_port_pbar_desc(ap, SIL24_PORT_BAR, offset, "port"); } /* configure and activate the device */ diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index b785db5..488d641 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -443,9 +443,15 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e /* different controllers have different number of ports - currently 4 or 8 */ /* All ports are on the same function. Multi-function device is no * longer available. This should not be seen in any system. */ - for (i = 0; i < host->n_ports; i++) - k2_sata_setup_port(&host->ports[i]->ioaddr, - mmio_base + i * K2_SATA_PORT_OFFSET); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int offset = i * K2_SATA_PORT_OFFSET; + + k2_sata_setup_port(&ap->ioaddr, mmio_base + offset); + + ata_port_pbar_desc(ap, 5, -1, "mmio"); + ata_port_pbar_desc(ap, 5, offset, "port"); + } rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 2c59ea5..692ab43 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -1381,9 +1381,8 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * const struct ata_port_info *ppi[] = { &pdc_port_info[ent->driver_data], NULL }; struct ata_host *host; - void __iomem *base; struct pdc_host_priv *hpriv; - int rc; + int i, rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); @@ -1409,11 +1408,17 @@ static int pdc_sata_init_one (struct pci_dev *pdev, const struct pci_device_id * return rc; host->iomap = pcim_iomap_table(pdev); - base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; - pdc_sata_setup_port(&host->ports[0]->ioaddr, base + 0x200); - pdc_sata_setup_port(&host->ports[1]->ioaddr, base + 0x280); - pdc_sata_setup_port(&host->ports[2]->ioaddr, base + 0x300); - pdc_sata_setup_port(&host->ports[3]->ioaddr, base + 0x380); + for (i = 0; i < 4; i++) { + struct ata_port *ap = host->ports[i]; + void __iomem *base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS; + unsigned int offset = 0x200 + i * 0x80; + + pdc_sata_setup_port(&ap->ioaddr, base + offset); + + ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, PDC_DIMM_BAR, -1, "dimm"); + ata_port_pbar_desc(ap, PDC_MMIO_BAR, offset, "port"); + } /* configure and activate */ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index 604f2e0..59590b5 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -239,6 +239,12 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) hpriv->scr_cfg_addr[2] = ULI5287_BASE + ULI5287_OFFS*4; ata_std_ports(ioaddr); + ata_port_desc(host->ports[2], + "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 0) + 8, + ((unsigned long long)pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS) + 4, + (unsigned long long)pci_resource_start(pdev, 4) + 16); + ioaddr = &host->ports[3]->ioaddr; ioaddr->cmd_addr = iomap[2] + 8; ioaddr->altstatus_addr = @@ -247,6 +253,13 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) ioaddr->bmdma_addr = iomap[4] + 24; hpriv->scr_cfg_addr[3] = ULI5287_BASE + ULI5287_OFFS*5; ata_std_ports(ioaddr); + + ata_port_desc(host->ports[2], + "cmd 0x%llx ctl 0x%llx bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 2) + 9, + ((unsigned long long)pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS) + 4, + (unsigned long long)pci_resource_start(pdev, 4) + 24); + break; case uli_5289: diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index fb97644..95162e3 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -399,6 +399,9 @@ static void vt6421_init_addrs(struct ata_port *ap) ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no); ata_std_ports(ioaddr); + + ata_port_pbar_desc(ap, ap->port_no, -1, "port"); + ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma"); } static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index 151a082..98a3153 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -406,9 +406,15 @@ static int __devinit vsc_sata_init_one (struct pci_dev *pdev, const struct pci_d mmio_base = host->iomap[VSC_MMIO_BAR]; - for (i = 0; i < host->n_ports; i++) - vsc_sata_setup_port(&host->ports[i]->ioaddr, - mmio_base + (i + 1) * VSC_SATA_PORT_OFFSET); + for (i = 0; i < host->n_ports; i++) { + struct ata_port *ap = host->ports[i]; + unsigned int offset = (i + 1) * VSC_SATA_PORT_OFFSET; + + vsc_sata_setup_port(&ap->ioaddr, mmio_base + offset); + + ata_port_pbar_desc(ap, VSC_MMIO_BAR, -1, "mmio"); + ata_port_pbar_desc(ap, VSC_MMIO_BAR, offset, "port"); + } /* * Use 32 bit DMA mask, because 64 bit address support is poor. diff --git a/include/linux/libata.h b/include/linux/libata.h index a9a4e43..0816441 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -367,8 +367,6 @@ struct ata_ioports { struct ata_host { spinlock_t lock; struct device *dev; - unsigned long irq; - unsigned long irq2; void __iomem * const *iomap; unsigned int n_ports; void *private_data; @@ -968,6 +966,16 @@ static inline void ata_ehi_hotplugged(struct ata_eh_info *ehi) } /* + * port description helpers + */ +extern void ata_port_desc(struct ata_port *ap, const char *fmt, ...) + __attribute__ ((format (printf, 2, 3))); +#ifdef CONFIG_PCI +extern void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset, + const char *name); +#endif + +/* * qc helpers */ static inline int ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH libata-dev#upstream 3/3 REGENERATED] libata: implement and use ata_port_desc() to report port configuration 2007-08-18 4:14 ` [PATCH libata-dev#upstream 3/3 REGENERATED] " Tejun Heo @ 2007-08-31 9:35 ` Jeff Garzik 0 siblings, 0 replies; 8+ messages in thread From: Jeff Garzik @ 2007-08-31 9:35 UTC (permalink / raw) To: Tejun Heo; +Cc: Alan Cox, linux-ide Tejun Heo wrote: > Currently, port configuration reporting has the following problems. > > * iomapped address is reported instead of raw address > * report contains irrelevant fields or lacks necessary fields for > non-SFF controllers. > * host->irq/irq2 are there just for reporting and hacky. > > This patch implements and uses ata_port_desc() and > ata_port_pbar_desc(). ata_port_desc() is almost identical to > ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no > locking requirement, can only be used during host initialization and " > " is used as separator instead of ", ". ata_port_pbar_desc() is a > helper to ease reporting of a PCI BAR or an offsetted address into it. > > LLD pushes whatever description it wants using the above two > functions. The accumulated description is printed on host > registration after "[S/P]ATA max MAX_XFERMODE ". > > SFF init helpers and ata_host_activate() automatically add > descriptions for addresses and irq respectively, so only LLDs which > isn't standard SFF need to add custom descriptions. In many cases, > such controllers need to report different things anyway. > > Signed-off-by: Tejun Heo <htejun@gmail.com> > --- > Regenerated against the current #upstream (41b135c7). applied ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle() 2007-07-30 5:23 [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle() Tejun Heo 2007-07-30 5:24 ` [PATCH libata-dev#upstream 2/3] libata: add printf format attribute to ehi desc functions Tejun Heo @ 2007-08-15 8:49 ` Jeff Garzik 1 sibling, 0 replies; 8+ messages in thread From: Jeff Garzik @ 2007-08-15 8:49 UTC (permalink / raw) To: Tejun Heo; +Cc: Alan Cox, linux-ide Tejun Heo wrote: > ata_wait_idle() identified controller by printing out the address of > the Status register. This is bogus because 1. it's iomapped address > 2. some controllers don't have Status register and don't initialize > the field. Use ata_port_printk() instead. > > Signed-off-by: Tejun Heo <htejun@gmail.com> > --- > Currently there's no equivalent ata_msg_* level for ATA_DEBUG, so the > printk is conditionalized with #ifdef ATA_DEBUG. We need to kill > ATA_DEBUG, ATA_VERBOSE_DEBUG and integrate them into ata_msg_* in the > future. > > include/linux/libata.h | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) applied 1-2 of 3 ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2007-08-31 9:35 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2007-07-30 5:23 [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle() Tejun Heo 2007-07-30 5:24 ` [PATCH libata-dev#upstream 2/3] libata: add printf format attribute to ehi desc functions Tejun Heo 2007-07-30 5:25 ` [PATCH libata-dev#upstream 3/3] libata: implement and use ata_port_desc() to report port configuration Tejun Heo 2007-07-30 12:55 ` Alan Cox 2007-08-15 8:48 ` Jeff Garzik 2007-08-18 4:14 ` [PATCH libata-dev#upstream 3/3 REGENERATED] " Tejun Heo 2007-08-31 9:35 ` Jeff Garzik 2007-08-15 8:49 ` [PATCH libata-dev#upstream 1/3] libata: use ata_port_printk() in ata_wait_idle() Jeff Garzik
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).