From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tejun Heo Subject: Re: Stardom SATA HSM violation Date: Fri, 07 Sep 2007 09:58:19 +0900 Message-ID: <46E0A22B.6040202@gmail.com> References: <46CFA08E.6090604@arbores.ca> <6bffcb0e0708261610g10d9c59ck5789fac6feca9f42@mail.gmail.com> <46DBCB6C.8080206@gmail.com> <46E01601.9010907@arbores.ca> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from rv-out-0910.google.com ([209.85.198.191]:44222 "EHLO rv-out-0910.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964875AbXIGA61 (ORCPT ); Thu, 6 Sep 2007 20:58:27 -0400 Received: by rv-out-0910.google.com with SMTP id k20so288443rvb for ; Thu, 06 Sep 2007 17:58:26 -0700 (PDT) In-Reply-To: <46E01601.9010907@arbores.ca> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: bryan@arbores.ca Cc: linux-kernel@vger.kernel.org, IDE/ATA development list , Michal.k.k.Piotrowski@gmail.com, Andrew Morton Bryan Woods wrote: > The full dmesg and hdparm -I command output are attached. > > I have received word from the vendor that the Stardom 2611 will do > RAID0 or 1 under windows, but only RAID1 under Linux. (Their manual > said it worked with Linux but failed to mention the RAID mode > restriction: argh!) > > They recommended the 2600 model for RAID0 with Linux, but that model > is only SATA-I so I will probably go with alternate hardware. > > The vendor also suggested the possibility of a firmware upgrade to > the 2611 - I am still waiting to hear. I will post a followup if > this happens. If possible, please post dmesg from 2.6.22.5. Thanks. -- tejun