Re: libata not working for sis5533

[Chuck Ebbert <cebbert@redhat.com>]

On 08/31/2007 06:20 PM, Patrizio Bassi wrote:
> Patrizio Bassi ha scritto:
>> Michal Piotrowski ha scritto:
>>> Hi,
>>>
>>> [Adding IDE wizards to CC]
>>>
>>> On 26/08/07, Patrizio Bassi <patrizio.bassi@gmail.com> wrote:
>>>   
>>>> My sis630 chipset shipped with Asus A1000
>>>> doesn't work properly with suspend with ide drivers
>>>> (http://bugzilla.kernel.org/show_bug.cgi?id=7077)
>>>>
>>>> i tried to switch to libata but i cannot boot.
>>>> I've enabled generic ide and sis specific code, both in-kernel. of
>>>> course scsi too.
>>>>
>>>> when i boot i get: irq #14 nobody cared and stop
>>>>
>>>> i have to remove battery to reboot pc.
>>>> I'm using 2.6.22.5, but i never got any libata kernel working.
>>>>
>>>> Patrizio
>>>>
>>>> ps. i'm writing from my desktop as i'm doing hardware mainteinance on
>>>> the laptop and could not boot it
>>>>
>>>> Please CC me.
>>>>
>>>> lspci:
>>>> 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 630 Host (rev 11)
>>>> 00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
>>>> 00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC
>>>> Bridge)
>>>> 00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
>>>> PCI Fast Ethernet (rev 80)
>>>> 00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB  1.0
>>>> Controller (rev 07)
>>>> 00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0
>>>> Controller (rev 07)
>>>> 00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
>>>> SiS PCI Audio Accelerator (rev 01)
>>>>  00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem
>>>> Controller (rev a0)
>>>> 00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual
>>>> PCI-to-PCI bridge (AGP)
>>>> 00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>> 00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
>>>> 01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
>>>> 630/730 PCI/AGP VGA Display Adapter (rev 11)
>>>>     
>>> Regards,
>>> Michal
>>>
>>>   
>>
> i've been out for a week, but found no notice, did i lost any email or
> no activity on this issue?
> 

I assume you tried the standard workarounds, like

  pci=nommconf,nomsi
  pci=noacpi
  pci=biosirq

(one at at time, not all at once.)