From: "Sumanth J.V" <sumanth@cse.unl.edu>
To: Tejun Heo <htejun@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>,
Andrew Morton <akpm@linux-foundation.org>,
linux-ide@vger.kernel.org
Subject: Re: Fw: Spurious completions during NCQ
Date: Mon, 17 Sep 2007 08:18:26 -0500 [thread overview]
Message-ID: <46EE7EA2.3000608@cse.unl.edu> (raw)
In-Reply-To: <46ED25DD.605@gmail.com>
Tejun Heo wrote:
> Jeff Garzik wrote:
>
>> Andrew Morton wrote:
>>
>>> Begin forwarded message:
>>>
>>> Date: Fri, 07 Sep 2007 12:57:14 -0500
>>> From: "Sumanth J.V" <sumanth@cse.unl.edu>
>>> To: linux-kernel@vger.kernel.org
>>> Subject: Spurious completions during NCQ
>>>
>>>
>>> I keep seeing this message a few times a day on my box.
>>>
>>> ata1.00: exception Emask 0x2 SAct 0x18 SErr 0x0 action 0x2 frozen
>>> ata1.00: (spurious completions during NCQ issue=0x0 SAct=0x18
>>> FIS=004040a1:00000004)
>>>
>
> Please report the result of "hdparm -I /dev/sda".
>
>
[root@localhost 3d]# hdparm -I /dev/sda
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD5000AAKS-22TMA0
Serial Number: WD-WCAPW2873034
Firmware Revision: 12.01C01
Standards:
Supported: 7 6 5 4
Likely used: 7
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 976773168
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific
minimum
R/W multiple sector transfer: Max = 16 Current = 0
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12]
unknown 206[13]
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
not supported: enhanced erase
128min for SECURITY ERASE UNIT.
Checksum: correct
next prev parent reply other threads:[~2007-09-17 13:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-15 7:57 Fw: Spurious completions during NCQ Andrew Morton
2007-09-15 23:57 ` Jeff Garzik
2007-09-16 12:47 ` Tejun Heo
2007-09-17 13:18 ` Sumanth J.V [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-10-19 23:46 Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46EE7EA2.3000608@cse.unl.edu \
--to=sumanth@cse.unl.edu \
--cc=akpm@linux-foundation.org \
--cc=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).