From: Bernd Schmidt <bernds_cb1@t-online.de>
To: Jeff Garzik <jeff@garzik.org>
Cc: "Berck E. Nash" <flyboy@gmail.com>,
"linux-ide@vger.kernel.org" <linux-ide@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.23-rc7-mm1 AHCI ATA errors -- won't boot
Date: Wed, 26 Sep 2007 12:03:48 +0200 [thread overview]
Message-ID: <46FA2E84.90708@t-online.de> (raw)
In-Reply-To: <46F9E2CB.9000002@garzik.org>
Jeff Garzik wrote:
> Would it also be possible for you to send along 'hdparm --Istdout'
> output for your config disk thingy, /dev/sdd ?
One of these appears in my system as well (ASUS P5W-DH Deluxe
mainboard). Here's the hdparm output:
/dev/sdb:
0040 3fff c837 0010 0000 0000 003f 0000
0000 0000 3030 3030 3030 305f 5f5f 5f5f
5f5f 5f5f 5f30 5f41 0003 3e00 0004 5247
4c31 3033 3634 436f 6e66 6967 2020 4469
736b 2020 2020 2020 2020 2020 2020 2020
2020 2020 2020 2020 2020 2020 2020 8001
0000 2f00 4000 0200 0000 0007 3fff 0010
003f fc10 00fb 0101 0280 0000 0000 0407
0003 0078 0078 0078 0078 0000 0000 0000
0000 0000 0000 0000 0201 0000 0000 0000
007e 001b 0068 5060 4000 0000 1000 4000
407f 0000 0000 0000 fffe 0000 c0fe 0000
0000 0000 0000 0000 0001 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0001 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0017 2040
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 0000
0000 0000 0000 0000 0000 0000 0000 baa5
Since about 2.6.17 or 2.6.18, it has been causing long delays while booting:
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x5)
ata2: port is slow to respond, please be patient (Status 0x80)
ata2: COMRESET failed (errno=-16)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-6: Config Disk, RGL10364, max UDMA/133
ata2.00: 640 sectors, multi 1: LBA
ata2.00: configured for UDMA/133
Bernd
next prev parent reply other threads:[~2007-09-26 10:03 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-24 18:02 2.6.23-rc7-mm1 AHCI ATA errors -- won't boot Berck E. Nash
2007-09-25 1:37 ` Jeff Garzik
2007-09-25 18:14 ` Berck E. Nash
2007-09-25 18:21 ` Jens Axboe
2007-09-25 18:28 ` Berck E. Nash
2007-09-25 18:32 ` Jens Axboe
2007-09-25 19:29 ` Berck E. Nash
2007-09-25 20:40 ` Jeff Garzik
2007-09-25 22:07 ` Berck E. Nash
2007-09-25 22:46 ` Berck E. Nash
2007-09-26 1:21 ` Jeff Garzik
2007-09-26 2:25 ` Berck E. Nash
2007-09-26 2:33 ` Jeff Garzik
2007-09-26 4:40 ` Jeff Garzik
2007-09-26 10:03 ` Bernd Schmidt [this message]
2007-09-26 14:22 ` Berck E. Nash
2007-09-27 1:05 ` Tejun Heo
2007-09-26 14:19 ` Berck E. Nash
2007-10-03 21:18 ` Jeff Garzik
[not found] <fa.7B5oGGPZtkIAG9trDHdybt+z9Qg@ifi.uio.no>
[not found] ` <fa.lh2GEsFivC+TeMBqgRXU+5p7ySM@ifi.uio.no>
[not found] ` <fa.tqIC/0YXN2BDEJQ7WBFuJ0EEUrI@ifi.uio.no>
[not found] ` <fa.Q/HeymU0u7VpG+dN5Lc1DraTos0@ifi.uio.no>
2007-09-25 22:39 ` Robert Hancock
2007-09-26 1:10 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=46FA2E84.90708@t-online.de \
--to=bernds_cb1@t-online.de \
--cc=flyboy@gmail.com \
--cc=jeff@garzik.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).