From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hernan Gustavo Solari Subject: Re: Serial ATA does not find partitions (Hitachi HD, new? ATI controller) where old SATA works Date: Mon, 01 Oct 2007 16:15:12 -0300 Message-ID: <47014740.5080002@df.uba.ar> References: <46FC4384.7080607@df.uba.ar> <46FCCD57.2020507@gmail.com> Reply-To: hgsolari@gmail.com Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from woody.df.uba.ar ([157.92.11.66]:45850 "EHLO woody.df.uba.ar" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752681AbXJAT6F (ORCPT ); Mon, 1 Oct 2007 15:58:05 -0400 In-Reply-To: <46FCCD57.2020507@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Tejun Heo Cc: linux-kernel , IDE/ATA development list , linux acpi Tejun netconsole, pritty nice debunging system... but (yes, there is always a but) it does not get to run. the method was well implemented, adding the acpi=off it sends the information to the receiving machine (I can even see passing a netconsole probing message in the machine under testing), but without turning off acpi it does not reach the point of loading and, consequently, it does not send a byte to the receiving machine. Hence, result: empty output. Hernan -- Hernan G. Solari (solari@df.uba.ar http://www.df.uba.ar/~solari)