* sata_nv in 2.6.23-rc8 only detects one of two controllers
@ 2007-10-01 21:39 Chuck Ebbert
2007-10-24 10:19 ` Tejun Heo
0 siblings, 1 reply; 2+ messages in thread
From: Chuck Ebbert @ 2007-10-01 21:39 UTC (permalink / raw)
To: IDE/ATA development list
2.6.18:
libata version 2.00 loaded.
sata_nv 0000:00:07.0: version 2.0
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
GSI 18 sharing vector 0xE9 and IRQ 18
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 20 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA400 irq 233
ata2: SATA max UDMA/133 cmd 0xAC00 ctl 0xA802 bmdma 0xA408 irq 233
scsi0 : sata_nv
...
ACPI: PCI Interrupt Link [LT3D] enabled at IRQ 47
GSI 19 sharing vector 0x32 and IRQ 19
ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LT3D] -> GSI 47 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:80:07.0 to 64
ata5: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 50
ata6: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 50
2.6.23-rc8:
libata version 2.21 loaded.
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:07.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:07.0 to 64
scsi1 : sata_nv
...
[No messages print for the second controller]
https://bugzilla.redhat.com/show_bug.cgi?id=313491
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: sata_nv in 2.6.23-rc8 only detects one of two controllers
2007-10-01 21:39 sata_nv in 2.6.23-rc8 only detects one of two controllers Chuck Ebbert
@ 2007-10-24 10:19 ` Tejun Heo
0 siblings, 0 replies; 2+ messages in thread
From: Tejun Heo @ 2007-10-24 10:19 UTC (permalink / raw)
To: Chuck Ebbert; +Cc: IDE/ATA development list
Chuck Ebbert wrote:
> 2.6.18:
> libata version 2.00 loaded.
> sata_nv 0000:00:07.0: version 2.0
> ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
> GSI 18 sharing vector 0xE9 and IRQ 18
> ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 20 (level, low) -> IRQ 233
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA400 irq 233
> ata2: SATA max UDMA/133 cmd 0xAC00 ctl 0xA802 bmdma 0xA408 irq 233
> scsi0 : sata_nv
> ...
> ACPI: PCI Interrupt Link [LT3D] enabled at IRQ 47
> GSI 19 sharing vector 0x32 and IRQ 19
> ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LT3D] -> GSI 47 (level, low) -> IRQ 50
> PCI: Setting latency timer of device 0000:80:07.0 to 64
> ata5: SATA max UDMA/133 cmd 0xE400 ctl 0xE002 bmdma 0xD400 irq 50
> ata6: SATA max UDMA/133 cmd 0xDC00 ctl 0xD802 bmdma 0xD408 irq 50
>
>
> 2.6.23-rc8:
> libata version 2.21 loaded.
> sata_nv 0000:00:07.0: version 3.5
> ACPI: PCI Interrupt Link [LTID] enabled at IRQ 22
> ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 22 (level, low) -> IRQ 22
> sata_nv 0000:00:07.0: Using ADMA mode
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> scsi1 : sata_nv
> ...
> [No messages print for the second controller]
Is this still the case for 2.6.23(.1)? If so, can you post full boot
log and the result of "lspci -nnvvvxxx"?
--
tejun
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-10-24 10:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-01 21:39 sata_nv in 2.6.23-rc8 only detects one of two controllers Chuck Ebbert
2007-10-24 10:19 ` Tejun Heo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).