From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: linux-2.6.git error messages Date: Tue, 16 Oct 2007 01:06:28 -0400 Message-ID: <471446D4.6050803@garzik.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from srv5.dvmed.net ([207.36.208.214]:48670 "EHLO mail.dvmed.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754966AbXJPFGa (ORCPT ); Tue, 16 Oct 2007 01:06:30 -0400 Received: from cpe-069-134-071-233.nc.res.rr.com ([69.134.71.233] helo=core.yyz.us) by mail.dvmed.net with esmtpsa (Exim 4.63 #1 (Red Hat Linux)) id 1IhedR-0003Yq-9X for linux-ide@vger.kernel.org; Tue, 16 Oct 2007 05:06:30 +0000 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: IDE/ATA development list I get this on ICH5, modular kernel build: libata version 3.00 loaded. PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata4294967295: failed to start port (errno=-19) ^^^^^^^^^^^^^ ACPI: PCI interrupt for device 0000:00:1f.1 disabled ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata4294967295: failed to start port (errno=-19) ^^^^^^^^^^^^^ ACPI: PCI interrupt for device 0000:00:1f.2 disabled ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x24c0 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x24c8 irq 15 ata1.00: ATA-5: MAXTOR 6L080J4, A93.0500, max UDMA/133 ata1.00: 156301488 sectors, multi 16: LBA ata1.00: configured for UDMA/100 ata2.00: ATAPI: HL-DT-ST CD-ROM GCR-8480B, 1.00, max MWDMA2 ata2.00: configured for MWDMA2 scsi 0:0:0:0: Direct-Access ATA MAXTOR 6L080J4 A93. PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: CD-ROM HL-DT-ST CD-ROM GCR-8480B 1.00 PQ: 0 ANSI: 5 scsi 1:0:0:0: Attached scsi generic sg1 type 5 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x24f0 ctl 0x2808 bmdma 0x24d0 irq 18 ata4: SATA max UDMA/133 cmd 0x24f8 ctl 0x280c bmdma 0x24d8 irq 18 ata4.00: ATA-6: ST380013AS, 3.05, max UDMA/133 ata4.00: 156301488 sectors, multi 16: LBA48 ata4.00: configured for UDMA/133 scsi 3:0:0:0: Direct-Access ATA ST380013AS 3.05 PQ: 0 ANSI: 5 sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 3:0:0:0: [sdb] 156301488 512-byte hardware sectors (80026 MB) sd 3:0:0:0: [sdb] Write Protect is off sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sdb2 sd 3:0:0:0: [sdb] Attached SCSI disk sd 3:0:0:0: Attached scsi generic sg2 type 0 sata_sil 0000:05:09.0: version 2.3 ACPI: PCI Interrupt 0000:05:09.0[A] -> GSI 18 (level, low) -> IRQ 18 scsi4 : sata_sil scsi5 : sata_sil ata5: SATA max UDMA/100 mmio m512@0xf0410000 tf 0xf0410080 irq 18 ata6: SATA max UDMA/100 mmio m512@0xf0410000 tf 0xf04100c0 irq 18 ata5: SATA link down (SStatus 0 SControl 310) ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata6.00: ATA-6: HDS722580VLSA80, V32OA60A, max UDMA/100 ata6.00: 160836480 sectors, multi 16: LBA48 ata6.00: configured for UDMA/100 scsi 5:0:0:0: Direct-Access ATA HDS722580VLSA80 V32O PQ: 0 ANSI: 5 sd 5:0:0:0: [sdc] 160836480 512-byte hardware sectors (82348 MB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 5:0:0:0: [sdc] 160836480 512-byte hardware sectors (82348 MB) sd 5:0:0:0: [sdc] Write Protect is off sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sdc2 sd 5:0:0:0: [sdc] Attached SCSI disk sd 5:0:0:0: Attached scsi generic sg3 type 0