From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-1?Q?Lars_Michael_Jogb=E4ck?= Subject: Problems with "frozen drives" on sil3124 + sil3726 Date: Sat, 20 Oct 2007 15:19:44 +0200 Message-ID: <471A0070.2080403@jogback.se> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="------------040504030103000605090009" Return-path: Received: from mail.jogback.se ([192.165.82.10]:37130 "EHLO jogback.se" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1754643AbXJTOTv (ORCPT ); Sat, 20 Oct 2007 10:19:51 -0400 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: htejun@gmail.com Cc: linux-ide@vger.kernel.org This is a multi-part message in MIME format. --------------040504030103000605090009 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi Tejun et. al. I'm running a server with Linux 2.6.18.1+Debian's Xen-patches and the sata+pmp-patches from http://home-tj.org/files/libata-tj-stable/libata-tj-2.6.18.1-20061020.tar.bz2 Unfortunately I can't upgrade to anything newer than 2.6.18 since there is no Xen Dom0-patches that I'm aware of to anything newer. I have successfully for a long time together, but a couple of weeks ago my motherboard gave in, and I installed a new one (along with new processor/memory). I'm running the very same kernel, the same sil3124-controller and the same sil3726-PMP-board. The only difference is that instead of a Supermicro P4SC8 w/ Intel P4 (and PCI-X slot of 66MHz) I'm currently using Supermicro PDSME+ w/ E6600 (and PCI-X slot of 133MHz) The sil3124-controller is an Addonics ADS3GX4R5-E. The problem is that with the new motherboard I'm getting a lot of libata-EH messages indicating that one of the disks are "frozen". The messages comes a couple times per hour, but with different disks as the "source" of the freeze. It happened with the old motherboard aswell, but only once or twice a month. Oct 12 09:44:58 cleopatra kernel: ata2.02: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x2 frozen Oct 12 09:44:58 cleopatra kernel: ata2.02: tag 1 cmd 0x60 Emask 0x4 stat 0x40 err 0x0 (timeout) Oct 12 09:44:58 cleopatra kernel: ata2.15: hard resetting port Oct 12 09:45:00 cleopatra kernel: ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 12 09:45:00 cleopatra kernel: ata2.00: hard resetting port Oct 12 09:45:00 cleopatra kernel: ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 12 09:45:01 cleopatra kernel: ata2.01: hard resetting port Oct 12 09:45:03 cleopatra kernel: ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 12 09:45:03 cleopatra kernel: ata2.02: hard resetting port Oct 12 09:45:04 cleopatra kernel: ata2.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 12 09:45:04 cleopatra kernel: ata2.03: hard resetting port Oct 12 09:45:04 cleopatra kernel: ata2.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 12 09:45:04 cleopatra kernel: ata2.04: hard resetting port Oct 12 09:45:04 cleopatra kernel: ata2.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 12 09:45:04 cleopatra kernel: ata2.00: configured for UDMA/100 Oct 12 09:45:04 cleopatra kernel: ata2.01: configured for UDMA/100 Oct 12 09:45:04 cleopatra kernel: ata2.02: configured for UDMA/100 Oct 12 09:45:04 cleopatra kernel: ata2.03: configured for UDMA/100 Oct 12 09:45:04 cleopatra kernel: ata2.04: configured for UDMA/100 Oct 12 09:45:04 cleopatra kernel: ata2: EH complete If I leave going, it slows down the speed of the disks remarkable. Oct 18 06:45:59 cleopatra kernel: ata2.04: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Oct 18 06:45:59 cleopatra kernel: ata2.04: tag 3 cmd 0xea Emask 0x4 stat 0x40 err 0x0 (timeout) Oct 18 06:45:59 cleopatra kernel: ata2.15: hard resetting port Oct 18 06:46:01 cleopatra kernel: ata2.15: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 18 06:46:02 cleopatra kernel: ata2.00: hard resetting port Oct 18 06:46:02 cleopatra kernel: ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 18 06:46:02 cleopatra kernel: ata2.01: hard resetting port Oct 18 06:46:03 cleopatra kernel: ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 18 06:46:03 cleopatra kernel: ata2.02: hard resetting port Oct 18 06:46:03 cleopatra kernel: ata2.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 18 06:46:03 cleopatra kernel: ata2.03: hard resetting port Oct 18 06:46:04 cleopatra kernel: ata2.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Oct 18 06:46:04 cleopatra kernel: ata2.04: hard resetting port Oct 18 06:46:05 cleopatra kernel: ata2.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Oct 18 06:46:05 cleopatra kernel: ata2.00: configured for UDMA/33 Oct 18 06:46:05 cleopatra kernel: ata2.01: configured for UDMA/66 Oct 18 06:46:05 cleopatra kernel: ata2.02: configured for PIO4 Oct 18 06:46:05 cleopatra kernel: ata2.03: configured for UDMA/100 Oct 18 06:46:05 cleopatra kernel: ata2.04: configured for UDMA/100 Oct 18 06:46:05 cleopatra kernel: ata2: EH complete I've tried to see a pattern of the disks (who all are in the same raid5 md), but some of the disks seems to affected more often but I can't find a pattern. $ sudo zgrep frozen /var/log/kern.log.?.gz | awk '{ print $6 }' | sort | uniq -c 55 ata1.00: 170 ata1.01: 3 ata1.02: 72 ata1.03: 137 ata1.04: 220 ata2.00: 107 ata2.01: 152 ata2.02: 129 ata2.03: 103 ata2.04: I've attached the dmesg after a reboot of the server. If there is anymore information needed to track this problem down, or if I should open a case in the kernel bugzilla, please let me know. Best Regards, /LM --------------040504030103000605090009 Content-Type: text/plain; name="dmesg" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg" Linux version 2.6.18-4-xen-686 (Debian 2.6.18.dfsg.1-12etch2.0.satapmp) (lm@jogback.se) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #3 SMP Sun Jul 29 00:44:21 CEST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000080800000 (usable) 1328MB HIGHMEM available. 727MB LOWMEM available. NX (Execute Disable) protection: active On node 0 totalpages: 526336 DMA zone: 186366 pages, LIFO batch:31 HighMem zone: 339970 pages, LIFO batch:31 found SMP MP-table at 000f5f30 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f5f00 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0xdfee33eb ACPI: FADT (v001 INTEL 0x06040000 PTL 0x00000003) @ 0xdfee9e70 ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0xdfee9ee4 ACPI: HPET (v001 PTLTD HPETTBL 0x06040000 LTP 0x00000001) @ 0xdfee9f20 ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0xdfee9f58 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0xdfee9fd8 ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050228) @ 0xdfee3427 ACPI: DSDT (v001 INTEL GLENWOOD 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfecc0000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfecc0400] gsi_base[48]) IOAPIC[2]: apic_id 4, version 32, address 0xfecc0400, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists. Total pages: 526336 Kernel command line: root=/dev/md0 ro xencons=tty6 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Xen reported: 2394.010 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: 0x00000000c2496000 - 0x00000000c6496000 vmalloc area: ee000000-f51fe000, maxmem 2d7fe000 Memory: 1993796k/2105344k available (1582k kernel code, 102244k reserved, 586k data, 148k init, 1359880k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5987.20 BogoMIPS (lpj=11974407) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebd3f1 20100000 00000000 00000000 0000e3bd 00000000 00000001 CPU: After vendor identify, caps: bfebd3f1 20100000 00000000 00000000 0000e3bd 00000000 00000001 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: After all inits, caps: bfebd3f1 20100000 00000000 00000940 0000e3bd 00000000 00000001 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 ENABLING IO-APIC IRQs SMP alternatives: switching to SMP code Brought up 2 CPUs Initializing CPU#1 migration_cost=16 checking if image is initramfs... it is Freeing initrd memory: 12703k freed Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 Setting up standard PCI resources Allocating PCI resources starting at e1000000 (gap: e0000000:10000000) ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device Boot video device is 0000:14:04.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DEV1.PXHA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DEV1.PXHB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 10 11 14 15) *7 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 11 14 15) *5 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 10 *11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0 PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0 PCI: Failed to allocate mem resource #9:100000@e1800000 for 0000:01:00.2 PCI: Bridge: 0000:01:00.0 IO window: 4000-4fff MEM window: e0200000-e02fffff PREFETCH window: e1000000-e17fffff PCI: Bridge: 0000:01:00.2 IO window: 5000-5fff MEM window: e0300000-e03fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:01.0 IO window: 4000-5fff MEM window: e0100000-e03fffff PREFETCH window: e1000000-e17fffff PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.4 IO window: 6000-6fff MEM window: e0400000-e04fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.5 IO window: 7000-7fff MEM window: e0500000-e05fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 8000-8fff MEM window: e0600000-e06fffff PREFETCH window: e8000000-efffffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Setting latency timer of device 0000:01:00.2 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.4 to 64 ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.5 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered Simple Boot Flag at 0x38 set to 0x80 audit: initializing netlink socket (disabled) audit(1192881079.660:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.4 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.4:pcie00] Allocate Port Service[0000:00:1c.4:pcie02] PCI: Setting latency timer of device 0000:00:1c.5 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.5:pcie00] Allocate Port Service[0000:00:1c.5:pcie02] hpet_acpi_add: no address or irqs in _CRS RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize WARNING: Failed to register Xen virtual console driver as 'tty1' Event-channel device installed. PNP: PS/2 Controller [PNP0303:KBC0] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI No-Shortcut mode Freeing unused kernel memory: 148k freed ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x2 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x6 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x7 input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new driver usbfs usbcore: registered new driver hub SCSI subsystem initialized USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 18, io base 0x00003000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected 3ware 9000 Storage Controller device driver for Linux v2.26.02.007. libata version 2.00 loaded. Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 20, io base 0x00003040 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003060 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected sata_sil24 0000:03:01.0: version 0.4 ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 48 (level, low) -> IRQ 21 sata_sil24 0000:03:01.0: Applying completion IRQ loss on PCI-X errata fix ata_piix 0000:00:1f.1: version 2.00ac7 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ata1: SATA max UDMA/100 cmd 0xEE0E0000 ctl 0x0 bmdma 0x0 irq 21 ata2: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x30A0 irq 14 ata3: SATA max UDMA/100 cmd 0xEE0E2000 ctl 0x0 bmdma 0x0 irq 21 ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30A8 irq 15 scsi1 : ata_piix ata5: SATA max UDMA/100 cmd 0xEE0E4000 ctl 0x0 bmdma 0x0 irq 21 ata6: SATA max UDMA/100 cmd 0xEE0E6000 ctl 0x0 bmdma 0x0 irq 21 scsi0 : sata_sil24 ata2.00: ATA-7, max UDMA/133, 160086528 sectors: LBA ata2.00: ata2: dev 0 multi count 16 ata2.01: ATA-7, max UDMA/133, 160086528 sectors: LBA ata2.01: ata2: dev 1 multi count 16 ata2.00: configured for UDMA/133 ata2.01: configured for UDMA/133 scsi3 : ata_piix ATA: abnormal status 0x7F on port 0x177 Vendor: ATA Model: Maxtor 6L080P0 Rev: BAJ4 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 6L080P0 Rev: BAJ4 Type: Direct-Access ANSI SCSI revision: 05 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 5 ports, feat 0x9/0x9 ata1.00: hard resetting port ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.01: hard resetting port ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.02: hard resetting port ata1.02: softreset failed (SRST command error) ata1.02: follow-up softreset failed, retrying in 5 secs ata1.02: hard resetting port ata1.02: hardreset failed (port not ready) ata1.02: reset failed, giving up ata1.15: hard resetting port ata1: controller in dubious state, performing PORT_RST ata1.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0) ata1.00: hard resetting port ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.01: hard resetting port ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.02: hard resetting port ata1.02: softreset failed (SRST command error) ata1.02: follow-up softreset failed, retrying in 5 secs ata1.02: hard resetting port ata1.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.03: hard resetting port ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.04: hard resetting port ata1.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 31/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/100 ata1.01: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 31/32) ata1.01: ata1: dev 0 multi count 0 ata1.01: configured for UDMA/100 ata1.02: ATA-8, max UDMA7, 976773168 sectors: LBA48 NCQ (depth 31/32) ata1.02: configured for UDMA/100 ata1.03: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 31/32) ata1.03: ata1: dev 0 multi count 0 ata1.03: configured for UDMA/100 ata1.04: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 31/32) ata1.04: ata1: dev 0 multi count 0 ata1.04: configured for UDMA/100 ata1: EH complete scsi2 : sata_sil24 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 5 ports, feat 0x9/0x9 ata3.00: hard resetting port ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.01: hard resetting port ata3.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.02: hard resetting port ata3.02: SATA link down (SStatus 0 SControl 300) ata3.03: hard resetting port ata3.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.04: hard resetting port ata3.04: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 31/32) ata3.00: ata3: dev 0 multi count 16 ata3.00: configured for UDMA/100 ata3.01: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 31/32) ata3.01: ata3: dev 0 multi count 0 ata3.01: configured for UDMA/100 ata3.03: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 31/32) ata3.03: ata3: dev 0 multi count 0 ata3.03: configured for UDMA/100 ata3.04: ATA-7, max UDMA/133, 781422768 sectors: LBA48 NCQ (depth 31/32) ata3.04: ata3: dev 0 multi count 0 ata3.04: configured for UDMA/100 ata3: EH complete scsi4 : sata_sil24 ata5: SATA link down (SStatus 0 SControl 300) scsi5 : sata_sil24 ata6: SATA link down (SStatus 0 SControl 300) Vendor: ATA Model: WDC WD4000KD-00N Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD4000KD-55N Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: SAMSUNG HD501LJ Rev: CR10 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD4000KD-55N Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD4000KD-00N Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD4000KD-00N Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD4000KD-00N Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD4000KS-00M Rev: 07.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: WDC WD4000KD-00N Rev: 01.0 Type: Direct-Access ANSI SCSI revision: 05 ahci 0000:00:1f.2: version 2.0 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sd 1:0:0:0: Attached scsi disk sda SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb: sdb1 sdb2 sd 1:0:1:0: Attached scsi disk sdb SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back SCSI device sdc: 781422768 512-byte hdwr sectors (400088 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back sdc: sdc1 sd 0:0:0:0: Attached scsi disk sdc SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back SCSI device sdd: 781422768 512-byte hdwr sectors (400088 MB) sdd: Write Protect is off sdd: Mode Sense: 00 3a 00 00 SCSI device sdd: drive cache: write back sdd: sdd1 sd 0:0:1:0: Attached scsi disk sdd SCSI device sde: 976773168 512-byte hdwr sectors (500108 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: drive cache: write back SCSI device sde: 976773168 512-byte hdwr sectors (500108 MB) sde: Write Protect is off sde: Mode Sense: 00 3a 00 00 SCSI device sde: drive cache: write back sde: sde1 sde2 sd 0:0:2:0: Attached scsi disk sde SCSI device sdf: 781422768 512-byte hdwr sectors (400088 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: drive cache: write back SCSI device sdf: 781422768 512-byte hdwr sectors (400088 MB) sdf: Write Protect is off sdf: Mode Sense: 00 3a 00 00 SCSI device sdf: drive cache: write back sdf: sdf1 sd 0:0:3:0: Attached scsi disk sdf SCSI device sdg: 781422768 512-byte hdwr sectors (400088 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: drive cache: write back SCSI device sdg: 781422768 512-byte hdwr sectors (400088 MB) sdg: Write Protect is off sdg: Mode Sense: 00 3a 00 00 SCSI device sdg: drive cache: write back sdg: sdg1 sd 0:0:4:0: Attached scsi disk sdg SCSI device sdh: 781422768 512-byte hdwr sectors (400088 MB) sdh: Write Protect is off sdh: Mode Sense: 00 3a 00 00 SCSI device sdh: drive cache: write back SCSI device sdh: 781422768 512-byte hdwr sectors (400088 MB) sdh: Write Protect is off sdh: Mode Sense: 00 3a 00 00 SCSI device sdh: drive cache: write back sdh: sdh1 sd 2:0:0:0: Attached scsi disk sdh SCSI device sdi: 781422768 512-byte hdwr sectors (400088 MB) sdi: Write Protect is off sdi: Mode Sense: 00 3a 00 00 SCSI device sdi: drive cache: write back SCSI device sdi: 781422768 512-byte hdwr sectors (400088 MB) sdi: Write Protect is off sdi: Mode Sense: 00 3a 00 00 SCSI device sdi: drive cache: write back sdi: sdi1 sd 2:0:1:0: Attached scsi disk sdi SCSI device sdj: 781422768 512-byte hdwr sectors (400088 MB) sdj: Write Protect is off sdj: Mode Sense: 00 3a 00 00 SCSI device sdj: drive cache: write back SCSI device sdj: 781422768 512-byte hdwr sectors (400088 MB) sdj: Write Protect is off sdj: Mode Sense: 00 3a 00 00 SCSI device sdj: drive cache: write back sdj: sdj1 sd 2:0:3:0: Attached scsi disk sdj SCSI device sdk: 781422768 512-byte hdwr sectors (400088 MB) sdk: Write Protect is off sdk: Mode Sense: 00 3a 00 00 SCSI device sdk: drive cache: write back SCSI device sdk: 781422768 512-byte hdwr sectors (400088 MB) sdk: Write Protect is off sdk: Mode Sense: 00 3a 00 00 SCSI device sdk: drive cache: write back sdk: sdk1 sd 2:0:4:0: Attached scsi disk sdk PCI: Setting latency timer of device 0000:00:1f.2 to 64 ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ata7: SATA max UDMA/133 cmd 0xEE02A500 ctl 0x0 bmdma 0x0 irq 19 ata8: SATA max UDMA/133 cmd 0xEE02A580 ctl 0x0 bmdma 0x0 irq 19 ata9: SATA max UDMA/133 cmd 0xEE02A600 ctl 0x0 bmdma 0x0 irq 19 ata10: SATA max UDMA/133 cmd 0xEE02A680 ctl 0x0 bmdma 0x0 irq 19 scsi6 : ahci ata7: SATA link down (SStatus 0 SControl 300) scsi7 : ahci ata8: SATA link down (SStatus 0 SControl 300) scsi8 : ahci ata9: SATA link down (SStatus 0 SControl 300) scsi9 : ahci ata10: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:12:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:12:00.0 to 64 e1000: 0000:12:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:30:48:8f:59:b6 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:13:00.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:13:00.0 to 64 e1000: 0000:13:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:30:48:8f:59:b7 e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 18, io mem 0xe0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 22 3w-9xxx: scsi10: AEN: WARNING (0x04:0x0006): Incomplete unit detected:unit=0. scsi10 : 3ware 9000 Storage Controller 3w-9xxx: scsi10: Found a 3ware 9000 Storage Controller at 0xe0200000, IRQ: 22. 3w-9xxx: scsi10: Firmware FE9X 2.08.00.009, BIOS BE9X 2.03.01.052, Ports: 12. Vendor: AMCC Model: 9500S-12 DISK Rev: 2.08 Type: Direct-Access ANSI SCSI revision: 03 sdl : very big device. try to use READ CAPACITY(16). SCSI device sdl: 6835791872 512-byte hdwr sectors (3499925 MB) sdl: Write Protect is off sdl: Mode Sense: 23 00 00 00 SCSI device sdl: drive cache: write back, no read (daft) sdl : very big device. try to use READ CAPACITY(16). SCSI device sdl: 6835791872 512-byte hdwr sectors (3499925 MB) sdl: Write Protect is off sdl: Mode Sense: 23 00 00 00 SCSI device sdl: drive cache: write back, no read (daft) sdl: unknown partition table sd 10:0:0:0: Attached scsi disk sdl Vendor: AMCC Model: 9500S-12 DISK Rev: 2.08 Type: Direct-Access ANSI SCSI revision: 03 SCSI device sdm: 390602752 512-byte hdwr sectors (199989 MB) sdm: Write Protect is off sdm: Mode Sense: 23 00 00 00 SCSI device sdm: drive cache: write back, no read (daft) SCSI device sdm: 390602752 512-byte hdwr sectors (199989 MB) sdm: Write Protect is off sdm: Mode Sense: 23 00 00 00 SCSI device sdm: drive cache: write back, no read (daft) sdm: unknown partition table sd 10:0:1:0: Attached scsi disk sdm ide0: I/O resource 0x1F0-0x1F7 not free. ide0: ports already in use, skipping probe ide1: I/O resource 0x170-0x177 not free. ide1: ports already in use, skipping probe md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 md: raid1 personality registered for level 1 md: md0 stopped. md: bind md: bind raid1: raid set md0 active with 2 out of 2 mirrors md0: bitmap initialized from disk: read 10/10 pages, set 51 bits, status: 0 created bitmap (146 pages) for device md0 device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com ReiserFS: md0: found reiserfs format "3.6" with standard journal ReiserFS: md0: using ordered data mode ReiserFS: md0: journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: md0: checking transaction log (md0) ReiserFS: md0: Using r5 hash to sort names pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 input: PC Speaker as /class/input/input1 Real Time Clock Driver v1.12ac intel_rng: FWH not detected Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 i2c /dev entries driver md: md2 stopped. md: bind md: bind raid1: raid set md2 active with 2 out of 2 mirrors md2: bitmap initialized from disk: read 15/15 pages, set 0 bits, status: 0 created bitmap (239 pages) for device md2 md: md1 stopped. md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind md: bind raid5: automatically using best checksumming function: pIII_sse pIII_sse : 2763.000 MB/sec raid5: using function: pIII_sse (2763.000 MB/sec) raid6: int32x1 939 MB/s raid6: int32x2 915 MB/s raid6: int32x4 786 MB/s raid6: int32x8 686 MB/s raid6: mmxx1 2918 MB/s raid6: mmxx2 3034 MB/s raid6: sse1x1 1842 MB/s raid6: sse1x2 2416 MB/s raid6: sse2x1 3440 MB/s raid6: sse2x2 3870 MB/s raid6: using algorithm sse2x2 (3870 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: device sdi1 operational as raid disk 0 raid5: device sdj1 operational as raid disk 9 raid5: device sde1 operational as raid disk 8 raid5: device sdg1 operational as raid disk 7 raid5: device sdh1 operational as raid disk 6 raid5: device sdf1 operational as raid disk 5 raid5: device sdk1 operational as raid disk 3 raid5: device sdd1 operational as raid disk 2 raid5: device sdc1 operational as raid disk 1 raid5: allocated 10450kB for md1 raid5: raid level 5 set md1 active with 9 out of 10 devices, algorithm 2 RAID5 conf printout: --- rd:10 wd:9 fd:1 disk 0, o:1, dev:sdi1 disk 1, o:1, dev:sdc1 disk 2, o:1, dev:sdd1 disk 3, o:1, dev:sdk1 disk 5, o:1, dev:sdf1 disk 6, o:1, dev:sdh1 disk 7, o:1, dev:sdg1 disk 8, o:1, dev:sde1 disk 9, o:1, dev:sdj1 ReiserFS: dm-0: found reiserfs format "3.6" with standard journal ReiserFS: dm-0: using ordered data mode ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-0: checking transaction log (dm-0) ReiserFS: dm-0: Using r5 hash to sort names ReiserFS: dm-1: found reiserfs format "3.6" with standard journal ReiserFS: dm-1: using ordered data mode ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: dm-1: checking transaction log (dm-1) ReiserFS: dm-1: Using r5 hash to sort names SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem Filesystem "dm-3": Disabling barriers, not supported by the underlying device XFS mounting filesystem dm-3 Ending clean XFS mount for filesystem: dm-3 Adding 3903672k swap on /dev/md2. Priority:-1 extents:1 across:3903672k e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver --------------040504030103000605090009--