Kristen Carlson Accardi wrote: > This patch will set the correct bits to turn on Aggressive > Link Power Management (ALPM) for the ahci driver. This > will cause the controller and disk to negotiate a lower > power state for the link when there is no activity (see > the AHCI 1.x spec for details). This feature is mutually > exclusive with Hot Plug, so when ALPM is enabled, Hot Plug > is disabled. ALPM will be enabled by default, but it is > settable via the scsi host syfs interface. Possible > settings for this feature are: > > Setting Effect > ---------------------------------------------------------- > min_power ALPM is enabled, and link set to enter > lowest power state (SLUMBER) when idle > Hot plug not allowed. > > max_performance ALPM is disabled, Hot Plug is allowed > > medium_power ALPM is enabled, and link set to enter > second lowest power state (PARTIAL) when > idle. Hot plug not allowed. > > Signed-off-by: Kristen Carlson Accardi applied, with minor changes (attached) Please check libata-dev.git#alpm and make sure it still works as expected (after it mirrors out to git.kernel.org)