* marvell 88SX6081 and linux 2.6.23.1
@ 2007-10-13 18:57 jeffunit
2007-10-26 2:04 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: jeffunit @ 2007-10-13 18:57 UTC (permalink / raw)
To: linux-ide
I built a kernel, 2.6.23.1 today.
My motherboard is an intel stl2, dual pentium 933 motherboard, with
about 3gb of ram.
I also have a promise tx100 controller with an ata hard drive for the
os, and a sony dvdrw drive.
There is an intel gigabit ethernet card, and an ati pci video card.
I have an 8 port supermicro sata II controller with the marvell
888SX6081 chipset.
I have four 500gb sata II maxtor hard drives attached to it.
All except /dev/sda1 seem to work fine.
When I copy/modify files on /dev/sda1, I get the following dmesg errors:
The machine is designed to be a fileserver, but I am happy to help
debug this issue to the best
of my abilities.
When I boot windows xp, xp sees all 4 of the sata drives, and they
work without any problems.
Please advise,
jeff
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
05 90 02 37
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 93323831
ReiserFS: sda1: warning: vs-13070: reiserfs_read_locked_inode: i/o
failure occurred trying to find stat data of [68977 68978 0x0 SD]
ata1: EH complete
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
05 90 02 37
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 93323831
ata1: EH complete
ReiserFS: sda1: warning: vs-13070: reiserfs_read_locked_inode: i/o
failure occurred trying to find stat data of [68983 68984 0x0 SD]
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:1f:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
08 58 02 26
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 139985446
ata1: EH complete
ReiserFS: sda1: warning: vs-13070: reiserfs_read_locked_inode: i/o
failure occurred trying to find stat data of [259213 259497 0x0 SD]
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:1f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:26:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
08 58 02 26
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 139985446
ReiserFS: sda1: warning: vs-13070: reiserfs_read_locked_inode: i/o
failure occurred trying to find stat data of [259213 259518 0x0 SD]
ata1: EH complete
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:2f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:32:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:2f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:32:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:2f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:32:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:2f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:32:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:2f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:32:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:2f:02:58/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 in
res 51/40:00:32:02:58/00:00:00:00:00/e8 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
08 58 02 32
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 139985458
ata1: EH complete
ReiserFS: sda1: warning: vs-13070: reiserfs_read_locked_inode: i/o
failure occurred trying to find stat data of [259213 259564 0x0 SD]
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
05 90 02 37
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 93323831
ata1: EH complete
ReiserFS: sda1: warning: vs-13070: reiserfs_read_locked_inode: i/o
failure occurred trying to find stat data of [68977 68978 0x0 SD]
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
05 90 02 37
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 93323831
ReiserFS: sda1: warning: vs-13070: reiserfs_read_locked_inode: i/o
failure occurred trying to find stat data of [68981 68982 0x0 SD]
ata1: EH complete
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
05 90 02 37
sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sda, sector 93323831
ReiserFS: sda1: warning: vs-13070: reiserfs_read_locked_inode: i/o
failure occurred trying to find stat data of [68983 68984 0x0 SD]
ata1: EH complete
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:35:06:44/40:00:10:00:00/e0 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:35:06:44/40:00:10:00:00/e0 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:35:06:44/40:00:10:00:00/e0 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:35:06:44/40:00:10:00:00/e0 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: edma_err 0x00000084, EDMA self-disable
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:35:06:44/40:00:10:00:00/e0 Emask 0x9 (media error)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:35:06:44/40:00:10:00:00/e0 Emask 0x4 (timeout)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 0:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
10 44 06 35
sd 0:0:0:0: [sda] Add. Sense: No additional sense information
end_request: I/O error, dev sda, sector 272893487
ata1: EH complete
ReiserFS: sda1: warning: vs-13070: reiserfs_read_locked_inode: i/o
failure occurred trying to find stat data of [78843 83201 0x0 SD]
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:35:06:44/40:00:10:00:00/e0 Emask 0x4 (timeout)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:35:06:44/40:00:10:00:00/e0 Emask 0x4 (timeout)
ata1: soft resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1: limiting SATA link speed to 1.5 Gbps
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:35:06:44/40:00:10:00:00/e0 Emask 0x4 (timeout)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:35:06:44/40:00:10:00:00/e0 Emask 0x4 (timeout)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata1.00: cmd 25/00:08:2f:06:44/00:00:10:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 40/00:00:35:06:44/40:00:10:00:00/e0 Emask 0x4 (timeout)
ata1: hard resetting port
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: configured for UDMA/133
ata1: EH complete
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: marvell 88SX6081 and linux 2.6.23.1
2007-10-13 18:57 marvell 88SX6081 and linux 2.6.23.1 jeffunit
@ 2007-10-26 2:04 ` Tejun Heo
2007-10-26 3:03 ` jeffunit
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2007-10-26 2:04 UTC (permalink / raw)
To: jeffunit; +Cc: linux-ide
jeffunit wrote:
> I built a kernel, 2.6.23.1 today.
> My motherboard is an intel stl2, dual pentium 933 motherboard, with
> about 3gb of ram.
> I also have a promise tx100 controller with an ata hard drive for the
> os, and a sony dvdrw drive.
> There is an intel gigabit ethernet card, and an ati pci video card.
>
> I have an 8 port supermicro sata II controller with the marvell
> 888SX6081 chipset.
> I have four 500gb sata II maxtor hard drives attached to it.
>
> All except /dev/sda1 seem to work fine.
> When I copy/modify files on /dev/sda1, I get the following dmesg errors:
>
> The machine is designed to be a fileserver, but I am happy to help debug
> this issue to the best
> of my abilities.
>
> When I boot windows xp, xp sees all 4 of the sata drives, and they work
> without any problems.
>
> Please advise,
> jeff
>
> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> ata1.00: edma_err 0x00000084, EDMA self-disable
> ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
> res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
Media errors which is usually localized to certain area of disk.
Replace disk.
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: marvell 88SX6081 and linux 2.6.23.1
2007-10-26 2:04 ` Tejun Heo
@ 2007-10-26 3:03 ` jeffunit
2007-10-26 3:23 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: jeffunit @ 2007-10-26 3:03 UTC (permalink / raw)
To: Tejun Heo, jeffunit; +Cc: linux-ide
>jeffunit wrote:
> > I built a kernel, 2.6.23.1 today.
> > My motherboard is an intel stl2, dual pentium 933 motherboard, with
> > about 3gb of ram.
> > I also have a promise tx100 controller with an ata hard drive for the
> > os, and a sony dvdrw drive.
> > There is an intel gigabit ethernet card, and an ati pci video card.
> >
> > I have an 8 port supermicro sata II controller with the marvell
> > 888SX6081 chipset.
> > I have four 500gb sata II maxtor hard drives attached to it.
> >
> > All except /dev/sda1 seem to work fine.
> > When I copy/modify files on /dev/sda1, I get the following dmesg errors:
> >
> > The machine is designed to be a fileserver, but I am happy to help debug
> > this issue to the best
> > of my abilities.
> >
> > When I boot windows xp, xp sees all 4 of the sata drives, and they work
> > without any problems.
> >
> > Please advise,
> > jeff
> >
> > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> > ata1.00: edma_err 0x00000084, EDMA self-disable
> > ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data 4096 in
> > res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media error)
>
>Media errors which is usually localized to certain area of disk.
>Replace disk.
The disk works fine under windows xp. I never got any errors with it and xp.
I can swap the first and second hard drive.
With the old kernel, the errors stayed with whatever drive was hooked up to
the first port of the controller. I will report the results.
jeff
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: marvell 88SX6081 and linux 2.6.23.1
2007-10-26 3:03 ` jeffunit
@ 2007-10-26 3:23 ` Tejun Heo
2007-10-26 4:42 ` jeffunit
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2007-10-26 3:23 UTC (permalink / raw)
To: jeffunit; +Cc: linux-ide
jeffunit wrote:
>
>> jeffunit wrote:
>> > I built a kernel, 2.6.23.1 today.
>> > My motherboard is an intel stl2, dual pentium 933 motherboard, with
>> > about 3gb of ram.
>> > I also have a promise tx100 controller with an ata hard drive for the
>> > os, and a sony dvdrw drive.
>> > There is an intel gigabit ethernet card, and an ati pci video card.
>> >
>> > I have an 8 port supermicro sata II controller with the marvell
>> > 888SX6081 chipset.
>> > I have four 500gb sata II maxtor hard drives attached to it.
>> >
>> > All except /dev/sda1 seem to work fine.
>> > When I copy/modify files on /dev/sda1, I get the following dmesg
>> errors:
>> >
>> > The machine is designed to be a fileserver, but I am happy to help
>> debug
>> > this issue to the best
>> > of my abilities.
>> >
>> > When I boot windows xp, xp sees all 4 of the sata drives, and they work
>> > without any problems.
>> >
>> > Please advise,
>> > jeff
>> >
>> > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>> > ata1.00: edma_err 0x00000084, EDMA self-disable
>> > ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data
>> 4096 in
>> > res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media
>> error)
>>
>> Media errors which is usually localized to certain area of disk.
>> Replace disk.
>
> The disk works fine under windows xp. I never got any errors with it and
> xp.
And you were accessing the same region of the drive?
> I can swap the first and second hard drive.
> With the old kernel, the errors stayed with whatever drive was hooked up to
> the first port of the controller. I will report the results.
Hmmm... Yes please. Also, please report the result of "smartctl -a
/dev/sda".
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: marvell 88SX6081 and linux 2.6.23.1
2007-10-26 3:23 ` Tejun Heo
@ 2007-10-26 4:42 ` jeffunit
2007-10-26 5:03 ` Tejun Heo
0 siblings, 1 reply; 7+ messages in thread
From: jeffunit @ 2007-10-26 4:42 UTC (permalink / raw)
To: Tejun Heo, jeffunit; +Cc: linux-ide
At 08:23 PM 10/25/2007, Tejun Heo wrote:
>jeffunit wrote:
> >
> >> jeffunit wrote:
> >> > I built a kernel, 2.6.23.1 today.
> >> > My motherboard is an intel stl2, dual pentium 933 motherboard, with
> >> > about 3gb of ram.
> >> > I also have a promise tx100 controller with an ata hard drive for the
> >> > os, and a sony dvdrw drive.
> >> > There is an intel gigabit ethernet card, and an ati pci video card.
> >> >
> >> > I have an 8 port supermicro sata II controller with the marvell
> >> > 888SX6081 chipset.
> >> > I have four 500gb sata II maxtor hard drives attached to it.
> >> >
> >> > All except /dev/sda1 seem to work fine.
> >> > When I copy/modify files on /dev/sda1, I get the following dmesg
> >> errors:
> >> >
> >> > The machine is designed to be a fileserver, but I am happy to help
> >> debug
> >> > this issue to the best
> >> > of my abilities.
> >> >
> >> > When I boot windows xp, xp sees all 4 of the sata drives, and they work
> >> > without any problems.
> >> >
> >> > Please advise,
> >> > jeff
> >> >
> >> > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
> >> > ata1.00: edma_err 0x00000084, EDMA self-disable
> >> > ata1.00: cmd c8/00:08:37:02:90/00:00:00:00:00/e5 tag 0 cdb 0x0 data
> >> 4096 in
> >> > res 51/40:00:37:02:90/00:00:00:00:00/e5 Emask 0x9 (media
> >> error)
> >>
> >> Media errors which is usually localized to certain area of disk.
> >> Replace disk.
> >
> > The disk works fine under windows xp. I never got any errors with it and
> > xp.
>
>And you were accessing the same region of the drive?
>
> > I can swap the first and second hard drive.
> > With the old kernel, the errors stayed with whatever drive was hooked up to
> > the first port of the controller. I will report the results.
>
>Hmmm... Yes please. Also, please report the result of "smartctl -a
>/dev/sda".
Pardon the long post
I swapped /dev/sda and /dev/sdb cables at the controller.
Here is what smartctl -a said afterward:
sda:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1Y3R3
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:02:45 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 119 094 006 Pre-fail Always
- 218977613
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 28
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 23
7
Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always
- 5082213
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 74
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 067 056 045 Old_age Always
- 555679777
194
Temperature_Celsius 0x0022 033 044 000 Old_age Always
- 33 (Lifetime Min/Max 0/21)
195
Hardware_ECC_Recovered 0x001a 087 056 000 Old_age Always
- 76318315
197
Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 1
198
Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 1
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 2
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2 occurred at disk power-on lifetime: 11 hours (0 days + 11 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 2b 7c 48 40 Error: IDNF at LBA = 0x00487c2b = 4750379
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 7a 48 40 00 02:04:42.054 READ VERIFY SECTOR(S) EXT
42 00 00 3f 78 48 40 00 02:04:42.049 READ VERIFY SECTOR(S) EXT
42 00 00 3f 78 48 40 00 02:04:42.043 READ VERIFY SECTOR(S) EXT
42 00 00 3f 76 48 40 00 02:04:42.036 READ VERIFY SECTOR(S) EXT
42 00 00 3f 74 48 40 00 02:04:47.251 READ VERIFY SECTOR(S) EXT
Error 1 occurred at disk power-on lifetime: 11 hours (0 days + 11 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 57 79 48 40 Error: IDNF at LBA = 0x00487957 = 4749655
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
42 00 00 3f 78 48 40 00 02:04:42.054 READ VERIFY SECTOR(S) EXT
42 00 00 3f 76 48 40 00 02:04:42.049 READ VERIFY SECTOR(S) EXT
42 00 00 3f 74 48 40 00 02:04:42.043 READ VERIFY SECTOR(S) EXT
42 00 00 3f 72 48 40 00 02:04:42.036 READ VERIFY SECTOR(S) EXT
42 00 00 3f 70 48 40 00 02:04:42.031 READ VERIFY SECTOR(S) EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sdb:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1RWTH
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:02:50 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 114 088 006 Pre-fail Always
- 63140281
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 27
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 12
7
Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always
- 2020356
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 73
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 001 001 000 Old_age Always
- 1195
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 067 055 045 Old_age Always
- 572522529
194
Temperature_Celsius 0x0022 033 045 000 Old_age Always
- 33 (Lifetime Min/Max 0/22)
195
Hardware_ECC_Recovered 0x001a 097 050 000 Old_age Always
- 140186474
197
Current_Pending_Sector 0x0012 069 069 000 Old_age Always
- 650
198
Offline_Uncorrectable 0x0010 069 069 000 Old_age Offline
- 650
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 090 243 000 Old_age Always
- 10
SMART Error Log Version: 1
ATA Error Count: 2892 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2892 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:14:16.881 READ DMA
27 00 00 00 00 00 e0 02 04:14:16.816 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:14:16.813 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:14:16.315 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:13:46.245 READ NATIVE MAX ADDRESS EXT
Error 2891 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:14:16.881 READ DMA
27 00 00 00 00 00 e0 02 04:14:16.816 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:14:16.813 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:14:16.315 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:13:46.245 READ NATIVE MAX ADDRESS EXT
Error 2890 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:13:15.418 READ DMA
27 00 00 00 00 00 e0 02 04:13:15.415 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:13:14.917 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:12:44.847 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:13:46.245 READ NATIVE MAX ADDRESS EXT
Error 2889 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:13:15.418 READ DMA
27 00 00 00 00 00 e0 02 04:13:15.415 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:13:14.917 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:12:44.847 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:12:44.792 READ NATIVE MAX ADDRESS EXT
Error 2888 occurred at disk power-on lifetime: 57 hours (2 days + 9 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ca 00 dc e6 Error: UNC at LBA = 0x06dc00ca = 115081418
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 c7 00 dc e6 00 04:12:14.016 READ DMA
27 00 00 00 00 00 e0 02 04:12:13.518 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 04:11:43.449 IDENTIFY DEVICE
ef 03 42 00 00 00 a0 02 04:12:44.847 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 04:12:44.792 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sdc:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1WMBW
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:02:54 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 114 100 006 Pre-fail Always
- 79425540
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 28
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7
Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always
- 5098162
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 74
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 066 055 045 Old_age Always
- 572522530
194
Temperature_Celsius 0x0022 034 045 000 Old_age Always
- 34 (Lifetime Min/Max 0/22)
195
Hardware_ECC_Recovered 0x001a 098 061 000 Old_age Always
- 192191767
197
Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198
Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
sdd:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1VJ3Y
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:02:58 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always
- 136511127
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 28
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 4
7
Seek_Error_Rate 0x000f 066 060 030 Pre-fail Always
- 5113771
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 74
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 067 057 045 Old_age Always
- 555679777
194
Temperature_Celsius 0x0022 033 043 000 Old_age Always
- 33 (Lifetime Min/Max 0/21)
195
Hardware_ECC_Recovered 0x001a 107 061 000 Old_age Always
- 207450593
197
Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198
Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 100 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
I then ran
dd if=/dev/sda of=/dev/null bs=1M &
and repeated for sdb, sdc, and sdd.
I got an error
Exit 1 dd if=/dev/sdb of=/dev/null bs=1M
dmesg says:
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2a 18
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 141848
Buffer I/O error on device sdb, logical block 17731
Buffer I/O error on device sdb, logical block 17732
Buffer I/O error on device sdb, logical block 17733
Buffer I/O error on device sdb, logical block 17734
Buffer I/O error on device sdb, logical block 17735
Buffer I/O error on device sdb, logical block 17736
Buffer I/O error on device sdb, logical block 17737
Buffer I/O error on device sdb, logical block 17738
Buffer I/O error on device sdb, logical block 17739
Buffer I/O error on device sdb, logical block 17740
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:08:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:08:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2b 08
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 142088
printk: 20 messages suppressed.
Buffer I/O error on device sdb, logical block 17761
ata2: EH complete
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:f8:10:2b:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 126976 in
res 51/40:00:10:2b:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2b 10
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 142096
Buffer I/O error on device sdb, logical block 17762
Buffer I/O error on device sdb, logical block 17763
Buffer I/O error on device sdb, logical block 17764
ata2: EH complete
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2a 18
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 141848
printk: 28 messages suppressed.
Buffer I/O error on device sdb, logical block 17731
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
ata2.00: edma_err 0x00000084, EDMA self-disable
ata2.00: cmd c8/00:08:18:2a:02/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
res 51/40:00:18:2a:02/00:00:00:00:00/e0 Emask 0x9 (media error)
ata2: soft resetting port
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/133
sd 1:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
sd 1:0:0:0: [sdb] Sense Key : Medium Error [current] [descriptor]
Descriptor sense data with sense descriptors (in hex):
72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
00 02 2a 18
sd 1:0:0:0: [sdb] Add. Sense: Unrecovered read error - auto reallocate failed
end_request: I/O error, dev sdb, sector 141848
Buffer I/O error on device sdb, logical block 17731
ata2: EH complete
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
I re-ran smartctl -a on /dev/sdb and it says:
smartctl version 5.37 [i586-mandriva-linux-gnu] Copyright (C) 2002-6
Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3500630AS
Serial Number: 9QG1RWTH
Firmware Version: 3.AAE
User Capacity: 500,107,862,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Oct 25 21:35:03 2007 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no
self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH
TYPE UPDATED WHEN_FAILED RAW_VALUE
1
Raw_Read_Error_Rate 0x000f 114 088 006 Pre-fail Always
- 63140281
3
Spin_Up_Time 0x0003 093 093 000 Pre-fail Always
- 0
4
Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 27
5
Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 12
7
Seek_Error_Rate 0x000f 063 060 030 Pre-fail Always
- 2049193
9
Power_On_Hours 0x0032 100 100 000 Old_age Always
- 74
10
Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12
Power_Cycle_Count 0x0032 100 100 020 Old_age Always
- 39
187
Unknown_Attribute 0x0032 001 001 000 Old_age Always
- 1225
189
Unknown_Attribute 0x003a 100 100 000 Old_age Always
- 0
190
Temperature_Celsius 0x0022 061 055 045 Old_age Always
- 656408615
194
Temperature_Celsius 0x0022 039 045 000 Old_age Always
- 39 (Lifetime Min/Max 0/22)
195
Hardware_ECC_Recovered 0x001a 072 050 000 Old_age Always
- 142192359
197
Current_Pending_Sector 0x0012 069 069 000 Old_age Always
- 653
198
Offline_Uncorrectable 0x0010 069 069 000 Old_age Offline
- 653
199
UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200
Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline
- 0
202
TA_Increase_Count 0x0032 089 242 000 Old_age Always
- 11
SMART Error Log Version: 1
ATA Error Count: 2922 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 2922 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:36.883 READ DMA
27 00 00 00 00 00 e0 02 00:30:36.758 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:35.189 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:38.826 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:38.769 READ NATIVE MAX ADDRESS EXT
Error 2921 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:36.883 READ DMA
27 00 00 00 00 00 e0 02 00:30:36.758 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:35.189 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:35.132 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:35.129 READ NATIVE MAX ADDRESS EXT
Error 2920 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:33.087 READ DMA
27 00 00 00 00 00 e0 02 00:30:31.518 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:35.189 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:35.132 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:35.129 READ NATIVE MAX ADDRESS EXT
Error 2919 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:33.087 READ DMA
27 00 00 00 00 00 e0 02 00:30:31.518 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:31.462 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:31.459 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:31.443 READ NATIVE MAX ADDRESS EXT
Error 2918 occurred at disk power-on lifetime: 74 hours (3 days + 2 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 18 2a 02 e0 Error: UNC at LBA = 0x00022a18 = 141848
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 18 2a 02 e0 00 00:30:27.863 READ DMA
27 00 00 00 00 00 e0 02 00:30:31.518 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:30:31.462 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:30:31.459 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 02 00:30:31.443 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Based on all of the above, I now suspect a hardware problem with
/dev/sdb (as you suspected), which was formerly /dev/sda.
There were two errors with the drive currently attached to /dev/sda,
but if they
don't come back, I won't worry.
Do you concur?
Thanks,
jeff
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: marvell 88SX6081 and linux 2.6.23.1
2007-10-26 4:42 ` jeffunit
@ 2007-10-26 5:03 ` Tejun Heo
2007-10-26 12:22 ` jeffunit
0 siblings, 1 reply; 7+ messages in thread
From: Tejun Heo @ 2007-10-26 5:03 UTC (permalink / raw)
To: jeffunit; +Cc: linux-ide
jeffunit wrote:
> Based on all of the above, I now suspect a hardware problem with
> /dev/sdb (as you suspected), which was formerly /dev/sda.
> There were two errors with the drive currently attached to /dev/sda, but
> if they
> don't come back, I won't worry.
>
> Do you concur?
Yeap. Uncorrectable media errors during READ do occur from time to time
and if you just write over those sectors, the harddrive will
automatically reallocate those tracks to spare area, so just doing "dd
if=/dev/zero of=/dev/sdb bs=1M" and rebuilding FS is likely to fix the
problem. If that doesn't help, you need to RMA the drive.
--
tejun
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: marvell 88SX6081 and linux 2.6.23.1
2007-10-26 5:03 ` Tejun Heo
@ 2007-10-26 12:22 ` jeffunit
0 siblings, 0 replies; 7+ messages in thread
From: jeffunit @ 2007-10-26 12:22 UTC (permalink / raw)
To: Tejun Heo, jeffunit; +Cc: linux-ide
At 10:03 PM 10/25/2007, Tejun Heo wrote:
>jeffunit wrote:
> > Based on all of the above, I now suspect a hardware problem with
> > /dev/sdb (as you suspected), which was formerly /dev/sda.
> > There were two errors with the drive currently attached to /dev/sda, but
> > if they
> > don't come back, I won't worry.
> >
> > Do you concur?
>
>Yeap. Uncorrectable media errors during READ do occur from time to time
>and if you just write over those sectors, the harddrive will
>automatically reallocate those tracks to spare area, so just doing "dd
>if=/dev/zero of=/dev/sdb bs=1M" and rebuilding FS is likely to fix the
>problem. If that doesn't help, you need to RMA the drive.
I will RMA the drives, as they are new, and the errors are enough to keep
linux from booting (the hard drives are mounted during boot). Hopefully this
will fix my sata disk problems.
thanks for all the help debugging the problem,
jeff
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2007-10-26 12:24 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-10-13 18:57 marvell 88SX6081 and linux 2.6.23.1 jeffunit
2007-10-26 2:04 ` Tejun Heo
2007-10-26 3:03 ` jeffunit
2007-10-26 3:23 ` Tejun Heo
2007-10-26 4:42 ` jeffunit
2007-10-26 5:03 ` Tejun Heo
2007-10-26 12:22 ` jeffunit
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).