linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: James Andrewartha <jamesa@daa.com.au>
To: Denys Fedoryshchenko <denys@visp.net.lb>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org,
	alan@lxorguk.ukuu.org.uk, htejun@gmail.com
Subject: Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
Date: Thu, 08 Nov 2007 00:23:10 +0900	[thread overview]
Message-ID: <4731D85E.70201@daa.com.au> (raw)
In-Reply-To: <20071107132630.M65286@visp.net.lb>

Denys Fedoryshchenko wrote:
> On Tue, 6 Nov 2007 22:15:21 -0800, Andrew Morton wrote
>>> On Thu, 1 Nov 2007 23:30:13 +0200 "Denys" <denys@visp.net.lb> wrote:
>>> Finally i got full DMESG with 1GB card till end. Seems not readable too.
>>> scsi0 : sc1200
>>> scsi1 : sc1200
>>> ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
>>> ata2: DUMMY
>>> ata1.00: CFA: SanDisk SDCFH-1024, HDX 3.07, max MWDMA2
>>> ata1.00: 2001888 sectors, multi 0: LBA
>>> ata1.00: configured for MWDMA2
>>> scsi 0:0:0:0: Direct-Access     ATA      SanDisk SDCFH-10 HDX  PQ: 0 
> ANSI: 5
>>> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
>>> sd 0:0:0:0: [sda] Write Protect is off
>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't 
> support 
>>> DPO or FUA
>>> sd 0:0:0:0: [sda] 2001888 512-byte hardware sectors (1025 MB)
>>> sd 0:0:0:0: [sda] Write Protect is off
>>> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't 
> support 
>>> DPO or FUA
>>>  sda:<4>Clocksource tsc unstable (delta = -334501841 ns)
>>> Time: pit clocksource has been installed.
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA2
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA2
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA2
>>> ata1: EH complete
>>> ata1.00: limiting speed to MWDMA1:PIO4
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>>> sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>>> Descriptor sense data with sense descriptors (in hex):
>>>         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
>>>         00 00 00 00
>>> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>>> end_request: I/O error, dev sda, sector 0
>>> Buffer I/O error on device sda, logical block 0
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> ata1: EH complete
>>> ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>>> ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 
> in
>>>          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
>>> ata1.00: status: { DRDY }
>>> ata1: soft resetting link
>>> ata1.00: configured for MWDMA1
>>> sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
>>> sd 0:0:0:0: [sda] Sense Key : 0xb [current] [descriptor]
>>> Descriptor sense data with sense descriptors (in hex):
>>>         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
>>>         00 00 00 00
>>> sd 0:0:0:0: [sda] ASC=0x0 ASCQ=0x0
>>> end_request: I/O error, dev sda, sector 0
>>> Buffer I/O error on device sda, logical block 0
>>> ata1: EH complete
>>>  unable to read partition table
>>> sd 0:0:0:0: [sda] Attached SCSI removable disk
>>> scx200_wdt: timer margin 60 seconds
>>> cpuidle: using governor ladder
>>> enabling scx200 high-res timer (1 MHz +0 ppm)
>>> TCP cubic registered
>>> Time: scx200_hrt clocksource has been installed.
>>> NET: Registered protocol family 1
>>> NET: Registered protocol family 17
>>> Using IPI Shortcut mode
>>> VFS: Cannot open root device "<NULL>" or unknown-block(8,18)
>>> Please append a correct "root=" boot option; here are the available 
>>> partitions:
>>> 0800    1000944 sda driver: sd
>>> Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-
>>> block(8,18)
>>>
>> (+linux-ide)
(+alan, tejun)
>> So this has never worked on any known kernel?
> 
> It is working now on old ide code (not libata).

Can you post the dmesg and hdparm -I of a working boot using the old ide
code? The thing that stuck out to me (as just a reader of linux-ide) was
that the problem involves MWDMA and CF, which have had problems (although
not the same as this one) in the past:
http://thread.gmane.org/gmane.linux.ide/22058 and
http://thread.gmane.org/gmane.linux.ide/22400

-- 
James Andrewartha

  reply	other threads:[~2007-11-07 15:56 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20071101213013.M54162@visp.net.lb>
2007-11-07  6:15 ` SC1200 failure in 2.6.23 and 2.6.24-rc1-git10 Andrew Morton
2007-11-07 13:27   ` Denys Fedoryshchenko
2007-11-07 15:23     ` James Andrewartha [this message]
2007-11-07 16:06       ` Denys Fedoryshchenko
2007-11-07 19:12         ` Mark Lord
2007-11-07 21:22           ` Denys Fedoryshchenko
2007-11-07 22:31             ` Mark Lord
2007-11-07 22:54               ` Alan Cox
2007-11-07 21:36           ` Denys Fedoryshchenko
2007-11-07 23:20           ` Jeff Garzik
2007-11-07 23:24             ` Mark Lord
2007-11-07 23:49             ` Denys Fedoryshchenko
2007-11-08  0:01             ` Denys Fedoryshchenko
2007-11-08  0:30               ` Bartlomiej Zolnierkiewicz
2007-11-08  7:16                 ` Denys Fedoryshchenko
2007-11-08 10:48                   ` Alan Cox
2007-11-08 16:44                     ` Denys Fedoryshchenko
2007-11-08 17:31                       ` Jeff Garzik
2007-11-08 19:56                         ` Denys Fedoryshchenko
2007-11-08 22:40                           ` Alan Cox
2007-11-09  1:44                           ` Tejun Heo
     [not found] <fa.FFqM2AneKZLH2d3/UIeCMjE/RLE@ifi.uio.no>
2007-11-08  1:41 ` Robert Hancock
2007-11-08  7:01   ` Denys Fedoryshchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4731D85E.70201@daa.com.au \
    --to=jamesa@daa.com.au \
    --cc=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=denys@visp.net.lb \
    --cc=htejun@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).