From mboxrd@z Thu Jan  1 00:00:00 1970
From: Mark Lord <liml@rtr.ca>
Subject: Re: SC1200 failure in 2.6.23 and 2.6.24-rc1-git10
Date: Wed, 07 Nov 2007 14:12:55 -0500
Message-ID: <47320E37.8010106@rtr.ca>
References: <20071101213013.M54162@visp.net.lb> <20071106221521.4f64a066.akpm@linux-foundation.org> <20071107132630.M65286@visp.net.lb> <4731D85E.70201@daa.com.au> <20071107160426.M31617@visp.net.lb>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit
Return-path: <linux-ide-owner@vger.kernel.org>
Received: from rtr.ca ([76.10.145.34]:1402 "EHLO mail.rtr.ca"
	rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP
	id S1754045AbXKGTM5 (ORCPT <rfc822;linux-ide@vger.kernel.org>);
	Wed, 7 Nov 2007 14:12:57 -0500
In-Reply-To: <20071107160426.M31617@visp.net.lb>
Sender: linux-ide-owner@vger.kernel.org
List-Id: linux-ide@vger.kernel.org
To: Denys Fedoryshchenko <denys@visp.net.lb>
Cc: James Andrewartha <jamesa@daa.com.au>, Andrew Morton <akpm@linux-foundation.org>, linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, alan@lxorguk.ukuu.org.uk, htejun@gmail.com

> WRAP ~ #./hdparm -I /dev/hda
> 
> /dev/hda:
> 
> ATAPI Write-once device, with non-removable media
>         Model Number:       SanDisk SDP3B-16
>         Serial Number:      24313671615
>         Firmware Revision:  vdd 1.00
> Standards:
>         Likely used: 3
> Configuration:
>         DRQ response: 50us.
>         Packet size: Unknown
> Capabilities:
>         LBA, IORDY(may be)(cannot be disabled)
>         Buffer size: 1.0kB      bytes avail on r/w long: 4
>         DMA: not supported
>         PIO: pio0 pio1

"ATAPI Write-once device"  ???

That cannot be correct (??).  Is this with hdparm-7.7 (latest sourceforge) ??
Can you show us the "hdparm --Istdout" output as well, please.

thanks.