Re: [PATCH] Add quirk to set AHCI mode on ICH boards

[Thorsten Leemhuis <thl@ct.heise.de>]

On 10.11.2007 00:32, Matthias Schniedermeyer wrote:
>  [...]
> My computer/mainboard @work has such a "broken" BIOS. Of the 5 
> SATA-Ports this MB has only 1 (and 1 "missing" that is reported by
> linux but i can't find on the MB) is configured as AHCI [...]

There is nothing "broken" here. You have a ICH8 (without R) that drives
four SATA ports, which are handled by ata_piix.

Then you have a Jmicron JMB363 -- it handles the PATA-Channel and two
SATA-Ports -- one internal (near the battery)/next to the PCI-Slot and a
external eSATA port. Seems you configured it in AHCI-Mode in the
BIOS-Setup. Linux will work just fine if you connect the hard disc to
that port. But if you want to install Windows XP you need a driver from
Jmicron.

There were BIOSes for the P5B where you could enabled AHCI for the ICH8
as well. It seems Asus removed it in the later BIOS-versions again as
Intel doesn't provide a Windows-AHCI driver for the basic ICH8.

HTH and clarifies some of your problems.

Cu
knurd

-- 
Thorsten Leemhuis
 c't- Magazin für Computertechnik       web    http://www.heise.de/ct/
 Heise Zeitschriften Verlag GmbH&Co.KG  phone  +49 (0)511 5352 666
 Helstorfer Str. 7                      icq    140593172
 D-30625 Hannover, Germany              jabber thl_at_work@jabber.ccc.de

/* Heise Zeitschriften Verlag GmbH & Co. KG, Registergericht:
   Amtsgericht Hannover HRA 26709; Persönlich haftende Gesellschafterin:
   Heise Zeitschriften Verlag Geschäftsführung GmbH, Registergericht:
   Amtsgericht Hannover, HRB 60405 Geschäftsführer: Ansgar Heise,
   Steven P. Steinkraus, Dr. Alfons Schräder                          */