linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Albert Lee <albertcc@tw.ibm.com>
To: Jeff Garzik <jeff@garzik.org>
Cc: Tejun Heo <htejun@gmail.com>, Mark Lord <liml@rtr.ca>,
	Alan Cox <alan@lxorguk.ukuu.org.uk>,
	linux-ide@vger.kernel.org
Subject: [PATCH 1/2] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives
Date: Wed, 14 Nov 2007 14:13:05 +0800	[thread overview]
Message-ID: <473A91F1.1060003@tw.ibm.com> (raw)
In-Reply-To: <473A56CE.4080804@gmail.com>

After an error condition, some ATAPI tape drives set DRQ=1 together with ERR=1
when asking the host to transfer the CDB of the next packet command (i.e. request sense).
This patch, a revised version of Alan/Mark's previous patch, adds ATA_HORKAGE_STUCK_ERR
to workaround the problem by ignoring the ERR bit and proceed sending the CDB.


Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mark Lord <liml@rtr.ca>
---
Revised per Alan, Mark and Tejun's comments. Tested ok with the Seagate STT8000A tape drive.
Patch against the libata-dev tree.

diff -Nrup 00_libata-dev/drivers/ata/libata-core.c 01_ide_tape_stuck_err/drivers/ata/libata-core.c
--- 00_libata-dev/drivers/ata/libata-core.c	2007-11-14 10:08:36.000000000 +0800
+++ 01_ide_tape_stuck_err/drivers/ata/libata-core.c	2007-11-14 11:20:31.000000000 +0800
@@ -5490,11 +5490,19 @@ fsm_start:
 		 * let the EH abort the command or reset the device.
 		 */
 		if (unlikely(status & (ATA_ERR | ATA_DF))) {
-			ata_port_printk(ap, KERN_WARNING, "DRQ=1 with device "
-					"error, dev_stat 0x%X\n", status);
-			qc->err_mask |= AC_ERR_HSM;
-			ap->hsm_task_state = HSM_ST_ERR;
-			goto fsm_start;
+			/* Some ATAPI tape drives forget to clear the ERR bit
+			 * when doing the next command (mostly request sense).
+			 * We ignore ERR here to workaround and proceed sending
+			 * the CDB.
+			 */
+			if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) {
+				ata_port_printk(ap, KERN_WARNING,
+						"DRQ=1 with device error, "
+						"dev_stat 0x%X\n", status);
+				qc->err_mask |= AC_ERR_HSM;
+				ap->hsm_task_state = HSM_ST_ERR;
+				goto fsm_start;
+			}
 		}
 
 		/* Send the CDB (atapi) or the first data block (ata pio out).
diff -Nrup 00_libata-dev/include/linux/libata.h 01_ide_tape_stuck_err/include/linux/libata.h
--- 00_libata-dev/include/linux/libata.h	2007-11-14 10:08:59.000000000 +0800
+++ 01_ide_tape_stuck_err/include/linux/libata.h	2007-11-14 11:19:32.000000000 +0800
@@ -340,6 +340,7 @@ enum {
 	ATA_HORKAGE_HPA_SIZE	= (1 << 6),	/* native size off by one */
 	ATA_HORKAGE_IPM		= (1 << 7),	/* Link PM problems */
 	ATA_HORKAGE_IVB		= (1 << 8),	/* cbl det validity bit bugs */
+	ATA_HORKAGE_STUCK_ERR	= (1 << 9),	/* stuck ERR on next PACKET */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */



  reply	other threads:[~2007-11-14  6:13 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-22  9:24 ATA tape drive STT3401A needs DRQ HSM workaround too Tejun Heo
2007-10-22  9:31 ` Alan Cox
2007-10-22  9:30   ` Tejun Heo
2007-10-22 14:18 ` Mark Lord
2007-10-22 18:37 ` Jeff Garzik
2007-10-22 22:36   ` Mark Lord
2007-11-13 10:08     ` Albert Lee
2007-11-13 10:30       ` [PATCH] libata: workaround DRQ=1 ERR=1 for ATAPI tape drives Albert Lee
2007-11-13 10:35         ` Tejun Heo
2007-11-13 13:49         ` Mark Lord
2007-11-13 14:16           ` Mark Lord
2007-11-13 15:14           ` Alan Cox
2007-11-13 17:24             ` Mark Lord
2007-11-13 18:12               ` Alan Cox
2007-11-13 18:22                 ` Mark Lord
2007-11-14  2:00                   ` Tejun Heo
2007-11-14  6:13                     ` Albert Lee [this message]
2007-11-14 12:19                       ` [PATCH 1/2] " Alan Cox
2007-11-15  0:32                       ` Tejun Heo
2007-11-14  6:20                     ` [PATCH 2/2] libata: use ATA_HORKAGE_STUCK_ERR " Albert Lee
2007-11-15  0:33                       ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=473A91F1.1060003@tw.ibm.com \
    --to=albertcc@tw.ibm.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=albertl@mail.com \
    --cc=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=liml@rtr.ca \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).