From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jonas Stare Subject: Re: [PATCH][RESUBMIT] drivers/ide/ide-probe.c, kernel 2.6.23.1 Date: Fri, 16 Nov 2007 13:10:13 +0100 Message-ID: <473D88A5.306@purplescout.se> References: <473434F1.50509@purplescout.se> <200711132303.28424.bzolnier@gmail.com> <473C08B2.1030004@purplescout.se> <200711152159.23607.bzolnier@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from proxy2.bredband.net ([195.54.101.72]:47687 "EHLO proxy2.bredband.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751649AbXKPM37 (ORCPT ); Fri, 16 Nov 2007 07:29:59 -0500 In-Reply-To: <200711152159.23607.bzolnier@gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Bartlomiej Zolnierkiewicz Cc: Andrew Morton , torvalds@linux-foundation.org, linux-kernel@vger.kernel.org, Alan Cox , Benjamin Herrenschmidt , linux-ide@vger.kernel.org Resubmit of IDE-probing-patch. It now checks hwif->drives[unit].present instead of forced_geom and there is also an if-statement so it doesn't change back to the master unless it have to. I choose to put it inside the if-statement that checks the return code from ide_wait_not_busy, since it shouldn't revert back to the master drive unless something is wrong and we have to leave the function. (I also left the old SELECT_DRIVE after the for-loop so that we will select the master if everything is ok.) Inside the if-statement or not makes not big difference until you get more than two drives on the ide-bus...but this code should be ready for it. :) Signed-off-by: Jonas Stare diff -u linux-2.6.23.1-orig/drivers/ide/ide-probe.c linux-2.6.23.1/drivers/ide/ide-probe.c --- linux-2.6.23.1-orig/drivers/ide/ide-probe.c 2007-10-12 18:43:44.000000000 +0200 +++ linux-2.6.23.1/drivers/ide/ide-probe.c 2007-11-16 10:26:23.000000000 +0100 @@ -643,6 +643,7 @@ static int wait_hwif_ready(ide_hwif_t *hwif) { int rc; + int unit; printk(KERN_DEBUG "Probing IDE interface %s...\n", hwif->name); @@ -659,16 +660,25 @@ return rc; /* Now make sure both master & slave are ready */ - SELECT_DRIVE(&hwif->drives[0]); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); - mdelay(2); - rc = ide_wait_not_busy(hwif, 35000); - if (rc) - return rc; - SELECT_DRIVE(&hwif->drives[1]); - hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); - mdelay(2); - rc = ide_wait_not_busy(hwif, 35000); + for (unit = 0; unit < MAX_DRIVES; ++unit) { + /* Ignore disks that we will not probe for later. */ + if (!hwif->drives[unit].noprobe || + hwif->drives[unit].present) { + SELECT_DRIVE(&hwif->drives[unit]); + hwif->OUTB(8, hwif->io_ports[IDE_CONTROL_OFFSET]); + mdelay(2); + rc = ide_wait_not_busy(hwif, 35000); + if (rc) { + /* Exit function with master reselected */ + if (unit != 0) + SELECT_DRIVE(&hwif->drives[0]); + return rc; + } + } else { + printk(KERN_DEBUG "Skip ide_wait_not_busy for %s:%d\n", + hwif->name, unit); + } + } /* Exit function with master reselected (let's be sane) */ SELECT_DRIVE(&hwif->drives[0]);