From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Paulus Subject: sata_sil issue on 2.6.22 Date: Tue, 20 Nov 2007 13:35:50 -0700 Message-ID: <47434526.7010304@verizonbusiness.com> Mime-Version: 1.0 Content-Type: text/plain; format=flowed; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Return-path: Received: from omzesmtp04.mci.com ([199.249.17.14]:50474 "EHLO omzesmtp04.mci.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757976AbXKTUk5 (ORCPT ); Tue, 20 Nov 2007 15:40:57 -0500 Received: from pmismtp03.mcilink.com ([166.37.158.163]) by firewall.verizonbusiness.com (Iplanet MTA 5.2) with ESMTP id <0JRT00JKONVWY9@firewall.verizonbusiness.com> for linux-ide@vger.kernel.org; Tue, 20 Nov 2007 20:35:56 +0000 (GMT) Received: from pmismtp03.mcilink.com ([127.0.0.1]) by pmismtp03.mcilink.com (iPlanet Messaging Server 5.2 HotFix 2.08 (built Sep 22 2005)) with SMTP id <0JRT005O9NVW1Q@pmismtp03.mcilink.com> for linux-ide@vger.kernel.org; Tue, 20 Nov 2007 20:35:56 +0000 (GMT) Received: from [127.0.0.1] ([166.34.133.85]) by pmismtp03.mcilink.com (iPlanet Messaging Server 5.2 HotFix 2.08 (built Sep 22 2005)) with ESMTP id <0JRT0044DNVTZZ@pmismtp03.mcilink.com> for linux-ide@vger.kernel.org; Tue, 20 Nov 2007 20:35:55 +0000 (GMT) Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Hello, I have a Compaq Deskpro EN P3 Celeron 850, running Debian etch with a 2.6.18 kernel, which runs/boots fine. It has an add-in generic SIL3112 SATA card, which also works fine with the 2.6.18 kernel. I just tried to install a 2.6.22 kernel from www.backports.org, and that kernel will not boot correctly because of the SATA card. Here is the dmesg output: Linux version 2.6.22-3-686 (Debian 2.6.22-5~bpo.1) (norbert@tretkowski.de) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed Oct 31 16:15:58 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable) BIOS-e820: 000000001ffd0000 - 000000001fff0000 (ACPI NVS) BIOS-e820: 000000001fff0000 - 0000000020000000 (usable) BIOS-e820: 00000000feea0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 512MB LOWMEM available. found SMP MP-table at 000f9bf0 Entering add_active_range(0, 0, 131072) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 131072 HighMem 131072 -> 131072 early_node_map[1] active PFN ranges 0: 0 -> 131072 On node 0 totalpages: 131072 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 992 pages used for memmap Normal zone: 125984 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap DMI 2.3 present. ACPI: RSDP 000E0010, 0014 (r0 COMPAQ) ACPI: RSDT 000E0080, 005C (r1 COMPAQ CPQ0005 20020913 0) ACPI: FACP 000E0130, 0074 (r1 COMPAQ SOLANO 1 0) ACPI: DSDT 000E0204, 12F5 (r1 COMPAQ DSDT 1 MSFT 100000D) ACPI: FACS 000E0040, 0040 ACPI: SSDT 000E14F9, 0174 (r1 COMPAQ CORE_UTL 1 MSFT 100000D) ACPI: SSDT 000E166D, 0D1C (r1 COMPAQ VILLTBL1 1 MSFT 100000D) ACPI: SSDT 000E33B3, 005D (r1 COMPAQ FHUB 1 MSFT 100000D) ACPI: APIC 000E01A4, 0060 (r1 COMPAQ SOLANO 1 0) ACPI: SSDT 000E333D, 0076 (r1 COMPAQ APIC 1 MSFT 100000D) ACPI: SSDT 000E2389, 06AD (r1 COMPAQ PNP_PRSS 1 MSFT 100000D) ACPI: SSDT 000E2A94, 01A4 (r1 COMPAQ S3 1 MSFT 100000D) ACPI: SSDT 000E2C38, 0158 (r1 COMPAQ PIDETM 1 MSFT 100000D) ACPI: SSDT 000E2EED, 010B (r1 COMPAQ GTF0 1 MSFT 100000D) ACPI: SSDT 000E2FF8, 0117 (r1 COMPAQ GTF1 1 MSFT 100000D) ACPI: SSDT 000E2D90, 015D (r1 COMPAQ SIDETM 1 MSFT 100000D) ACPI: SSDT 000E310F, 0117 (r1 COMPAQ GTF2 1 MSFT 100000D) ACPI: SSDT 000E349B, 004E (r1 COMPAQ FINIS 1 MSFT 100000D) ACPI: PM-Timer IO Port: 0xf808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:deea0000) Built 1 zonelists. Total pages: 130048 Kernel command line: root=/dev/hda1 ro single mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 847.431 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 510088k/524288k available (1689k kernel code, 13380k reserved, 648k data, 244k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) .init : 0xc034f000 - 0xc038c000 ( 244 kB) .data : 0xc02a65d7 - 0xc03487e4 ( 648 kB) .text : 0xc0100000 - 0xc02a65d7 (1689 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1696.43 BogoMIPS (lpj=3392864) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0383fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 11k freed ACPI: Core revision 20070126 CPU0: Intel Celeron (Coppermine) stepping 0a Total of 1 processors activated (1696.43 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 1 CPUs Booting paravirtualized kernel on bare hardware NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xe838d, last bus=2 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region f800-f87f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region fa00-fa3f claimed by ICH4 GPIO PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: RTC can wake from S4 pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved pnp: 00:0e: ioport range 0x400-0x41f has been reserved pnp: 00:0e: ioport range 0x420-0x43f has been reserved pnp: 00:0e: ioport range 0x440-0x45f has been reserved pnp: 00:0e: ioport range 0x460-0x47f has been reserved Time: tsc clocksource has been installed. pnp: 00:0e: ioport range 0xf800-0xf81f has been reserved pnp: 00:0e: ioport range 0xf820-0xf83f has been reserved pnp: 00:0e: ioport range 0xf840-0xf85f has been reserved pnp: 00:0e: ioport range 0xf860-0xf87f has been reserved pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0f: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0f: iomem range 0x100000-0x1fffffff could not be reserved pnp: 00:0f: iomem range 0xfff80000-0xffffffff could not be reserved PCI: Bridge: 0000:00:1e.0 IO window: 1000-1fff MEM window: 40000000-413fffff PREFETCH window: 41500000-4fffffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 16384 (order: 4, 65536 bytes) TCP established hash table entries: 65536 (order: 7, 786432 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 65536 bind 65536) TCP reno registered checking if image is initramfs...<6>Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 5901k freed audit: initializing netlink socket (disabled) audit(1195547209.852:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:02:04.0 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode Freeing unused kernel memory: 244k freed input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: Processor [CPU0] (supports 8 throttling states) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 0000:00:1f.1 ICH2: chipset revision 1 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation SCSI subsystem initialized libata version 2.21 loaded. hda: Maxtor 34098H4, ATA DISK drive hdb: WDC WD200BB-00DEA0, ATA DISK drive hda: selected mode 0x45 hdb: selected mode 0x45 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: COMPAQ SC-148F, ATAPI CD/DVD-ROM drive hdc: selected mode 0x22 ide1 at 0x170-0x177,0x376 on irq 15 ACPI: PCI Interrupt 0000:00:1f.4[C] -> GSI 23 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1f.4 to 64 uhci_hcd 0000:00:1f.4: UHCI Host Controller uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1f.4: irq 16, io base 0x00002440 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 17 e100: eth0: e100_probe: addr 0x41000000, irq 17, MAC addr 00:02:A5:10:5A:37 sata_sil 0000:02:0b.0: version 2.2 ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 18 scsi0 : sata_sil scsi1 : sata_sil ata1: SATA max UDMA/100 cmd 0xe0812080 ctl 0xe081208a bmdma 0xe0812000 irq 18 ata2: SATA max UDMA/100 cmd 0xe08120c0 ctl 0xe08120ca bmdma 0xe0812008 irq 18 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: revalidation failed (errno=-5) ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: disabled ata1: EH pending after completion, repeating EH (cnt=4) ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to set xfermode (err_mask=0x40) ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: disabled ata1: EH pending after completion, repeating EH (cnt=3) ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to set xfermode (err_mask=0x40) ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: disabled ata1: EH pending after completion, repeating EH (cnt=2) ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to set xfermode (err_mask=0x40) ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: disabled ata1: EH pending after completion, repeating EH (cnt=1) ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x2 frozen ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: ATA-5: ST310216A, 3.01, max UDMA/100 ata1.00: 19541088 sectors, multi 16: LBA ata1.00: applying bridge limits ata1.00: failed to set xfermode (err_mask=0x40) ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: limiting speed to UDMA/100:PIO3 ata1: failed to recover some devices, retrying in 5 secs ata1: hard resetting port ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: failed to set xfermode (err_mask=0x40) ata1.00: disabled ata1: EH pending after 5 tries, giving up ata1: EH complete ata2: SATA link down (SStatus 0 SControl 310) hda: max request size: 128KiB hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 hda2 < hda5 > hdb: max request size: 128KiB hdb: 39102336 sectors (20020 MB) w/8192KiB Cache, CHS=38792/16/63, UDMA(100) hdb: cache flushes not supported hdb: hdb1 hdc: ATAPI 48X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) iTCO_wdt: Found a ICH2 TCO device (Version=1, TCOBASE=0xf860) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) Linux agpgart interface v0.102 (c) Dave Jones shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Intel 82802 RNG detected agpgart: Detected an Intel i815 Chipset. agpgart: AGP aperture is 64M @ 0x0 Real Time Clock Driver v1.12ac input: PC Speaker as /class/input/input1 parport_pc 00:07: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 input: PS2++ Logitech MX Mouse as /class/input/input2 ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55824 usecs intel8x0: clocking to 41145 Adding 1642496k swap on /dev/hda5. Priority:-1 extents:1 across:1642496k EXT3 FS on hda1, internal journal Here is the output from 'hwinfo --all': 01: None 00.0: 0102 Floppy disk controller [Created at floppy.112] Unique ID: rdCR.3wRL2_g4d2B Hardware Class: storage Model: "Floppy disk controller" I/O Ports: 0x3f2-0x3f5 (rw) DMA: 2 IRQ: 6 (10 events) I/O Port: 0x3f7 (rw) Config Status: cfg=new, avail=yes, need=no, active=unknown 02: Floppy 00.0: 10603 Floppy Disk [Created at floppy.120] Unique ID: sPPV.oZ89vuho4Y3 Parent ID: rdCR.3wRL2_g4d2B Hardware Class: floppy Model: "Floppy Disk" Device File: /dev/fd0 Size: 2880 sectors a 512 bytes Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #1 (Floppy disk controller) 03: None 00.0: 10105 BIOS [Created at bios.173] Unique ID: rdCR.lZF+r4EgHp4 Hardware Class: bios BIOS Keyboard LED Status: Scroll Lock: off Num Lock: off Caps Lock: off Serial Port 0: 0x3f8 Serial Port 1: 0x2f8 Parallel Port 0: 0x378 Base Memory: 638 kB PnP BIOS: CPQ0000 BIOS: extended read supported MP spec rev 1.4 info: OEM id: "COMPAQ" Product id: "Deskpro" 1 CPUs (0 disabled) BIOS32 Service Directory Entry: 0xe7300 SMBIOS Version: 2.3 BIOS Info: #1 Vendor: "Compaq" Version: "686P2 v3.14" Date: "09/13/2002" Start Address: 0xe0000 ROM Size: 512 kB Features: 0x0337000000003df9de80 PCI supported PnP supported APM supported BIOS flashable BIOS shadowing allowed ESCD supported CD boot supported Selectable boot supported EDD spec supported 1.2MB NEC 9800 Japanese Floppy supported 1.2MB Toshiba Japanese Floppy supported 360kB Floppy supported 1.2MB Floppy supported 720kB Floppy supported Print Screen supported 8042 Keyboard Services supported Serial Services supported Printer Services supported ACPI supported USB Legacy supported AGP supported LS-120 boot supported ATAPI ZIP boot supported BIOS Boot Spec supported F12 Network boot supported System Info: #2 Manufacturer: "Compaq" Product: "Deskpro" Serial: "6048DYSZ0129" UUID: undefined, but settable Wake-up: 0x06 (Power Switch) Board Info: #3 Manufacturer: "Compaq" Product: "0684h" Serial: "6048DYSZ0129" Chassis Info: #4 Manufacturer: "Compaq" Serial: "6048DYSZ0129" Asset Tag: "6048DYSZ0129" Type: 0x03 (Desktop) Lock: present Bootup State: 0x03 (Safe) Power Supply State: 0x03 (Safe) Thermal State: 0x03 (Safe) Security Status: 0x02 (Unknown) Processor Info: #5 Socket: "XU1" Socket Type: 0x04 (ZIF Socket) Socket Status: Populated Type: 0x03 (CPU) Family: 0x0f (Celeron) Manufacturer: "Intel" Version: "Intel(R) Celeron(tm) processor 850 MHz" Processor ID: 0x0383fbff0000068a Status: 0x01 (Enabled) Voltage: 2.0 V External Clock: 100 MHz Max. Speed: 2300 MHz Current Speed: 850 MHz L1 Cache: #6 L2 Cache: #7 Cache Info: #6 Designation: "Internal L1 Cache" Level: L1 State: Enabled Mode: 0x01 (Write Back) Location: 0x00 (Internal, Not Socketed) ECC: 0x02 (Unknown) Type: 0x02 (Unknown) Associativity: 0x05 (4-way Set-Associative) Max. Size: 32 kB Current Size: 32 kB Supported SRAM Types: 0x0008 (Burst) Current SRAM Type: 0x0008 (Burst) Cache Info: #7 Designation: "Cache L2" Level: L2 State: Enabled Mode: 0x01 (Write Back) Location: 0x00 (Internal, Not Socketed) ECC: 0x05 (Single-bit) Type: 0x02 (Unknown) Associativity: 0x05 (4-way Set-Associative) Max. Size: 4096 kB Current Size: 128 kB Supported SRAM Types: 0x0008 (Burst) Current SRAM Type: 0x0008 (Burst) Port Connector: #8 Type: 0x09 (Serial Port 16550A Compatible) Internal Designator: "COM A" Internal Connector: 0x18 (9 Pin Dual Inline [pin 10 cut]) External Designator: "COM A" External Connector: 0x08 (DB-9 pin male) Port Connector: #9 Type: 0x09 (Serial Port 16550A Compatible) Internal Designator: "COM B" Internal Connector: 0x18 (9 Pin Dual Inline [pin 10 cut]) External Designator: "COM B" External Connector: 0x08 (DB-9 pin male) Port Connector: #10 Type: 0x05 (Parallel Port ECP/EPP) Internal Designator: "PAR" Internal Connector: 0x19 (25 Pin Dual Inline [pin 26 cut]) External Designator: "PAR" External Connector: 0x05 (DB-25 pin female) Port Connector: #11 Type: 0x10 (USB) Internal Designator: "USB 1" Internal Connector: 0x12 (Access Bus [USB]) External Designator: "USB 1" External Connector: 0x12 (Access Bus [USB]) Port Connector: #12 Type: 0x10 (USB) Internal Designator: "USB 2" Internal Connector: 0x12 (Access Bus [USB]) External Designator: "USB 2" External Connector: 0x12 (Access Bus [USB]) Port Connector: #15 Type: 0x0d (Keyboard Port) Internal Designator: "KBD" Internal Connector: 0x0f (PS/2) External Designator: "KBD" External Connector: 0x0f (PS/2) Port Connector: #16 Type: 0x0e (Mouse Port) Internal Designator: "MOUSE" Internal Connector: 0x0f (PS/2) External Designator: "MOUSE" External Connector: 0x0f (PS/2) Port Connector: #17 Type: 0x1d (Audio Port) Internal Designator: "CD-AUDIO IN 1" Internal Connector: 0x1c (On Board Sound Input from CD-ROM) Port Connector: #18 Type: 0x1d (Audio Port) Internal Designator: "CD-AUDIO IN 2" Internal Connector: 0x1c (On Board Sound Input from CD-ROM) Port Connector: #19 Type: 0x1d (Audio Port) Internal Designator: "TV & DVD Audio In" Internal Connector: 0x1c (On Board Sound Input from CD-ROM) Port Connector: #20 Internal Designator: "P20:Primary IDE" Internal Connector: 0x16 (On Board IDE) Port Connector: #21 Internal Designator: "P21:Secondary IDE" Internal Connector: 0x16 (On Board IDE) Port Connector: #22 Internal Designator: "P10:Floppy" Internal Connector: 0x17 (On Board Floppy) Port Connector: #23 Type: 0x0b (MIDI Port) Internal Designator: "J13" Internal Connector: 0xff (Other) External Designator: "Line I/O: MIC" External Connector: 0x0d (Mini-DIN) Port Connector: #24 Type: 0x0b (MIDI Port) Internal Designator: "J15" Internal Connector: 0xff (Other) External Designator: "Line I/O: Line In" External Connector: 0x0d (Mini-DIN) Port Connector: #27 Type: 0x0b (MIDI Port) Internal Designator: "J13" Internal Connector: 0xff (Other) External Designator: "HeadPhone & Line Out" External Connector: 0x0d (Mini-DIN) Port Connector: #28 Type: 0xff (Other) Internal Designator: "P9: NIC" Internal Connector: 0xff (Other) Port Connector: #29 Type: 0xff (Other) Internal Designator: "Chassis Fan" Internal Connector: 0xff (Other) Port Connector: #30 Type: 0xff (Other) Internal Designator: "P6: Speaker" Internal Connector: 0xff (Other) Language Info: #31 Languages: en|US|iso8859-1 Current: en|US|iso8859-1 Type 15 Record: #32 Data 00: 0f 19 20 00 3d 00 00 00 00 00 03 01 00 00 00 00 Data 10: ac 10 0f 00 00 01 02 08 04 Physical Memory Array: #33 Use: 0x03 (System memory) Location: 0x03 (Motherboard) Slots: 3 Max. Size: 512 MB ECC: 0x03 (None) Physical Memory Array: #34 Use: 0x05 (Flash memory) Location: 0x03 (Motherboard) Slots: 1 Max. Size: 512 kB ECC: 0x03 (None) Memory Device: #35 Location: "XMM1" Manufacturer: "JEDEC ID:7F 98 00 00 00 00 00 00" Serial: "00581800" Part Number: "32MX64PC100CL2168" Memory Array: #33 Form Factor: 0x09 (DIMM) Type: 0x0f (SDRAM) Type Detail: 0x0080 (Synchronous) Data Width: 64 bits Size: 256 MB Speed: 100 MHz Memory Device: #36 Location: "XMM2" Manufacturer: "JEDEC ID:7F 98 00 00 00 00 00 00" Serial: "00211800" Part Number: "32MX64PC100CL2168" Memory Array: #33 Form Factor: 0x09 (DIMM) Type: 0x0f (SDRAM) Type Detail: 0x0080 (Synchronous) Data Width: 64 bits Size: 256 MB Speed: 100 MHz Memory Device: #37 Location: "XMM3" Manufacturer: "JEDEC ID:" Memory Array: #33 Form Factor: 0x09 (DIMM) Type: 0x0f (SDRAM) Type Detail: 0x0080 (Synchronous) Data Width: 0 bits Size: No Memory Installed Memory Device: #40 Location: "XU15" Memory Array: #34 Form Factor: 0x05 (Chip) Type: 0x09 (FLASH) Type Detail: 0x1000 (Non-volatile) Data Width: 4 bits Size: 512 kB Memory Array Mapping: #41 Memory Array: #33 Partition Width: 3 Start Address: 0x00000000 End Address: 0x20000000 Memory Array Mapping: #42 Memory Array: #34 Partition Width: 1 Start Address: 0x00000000fff80000 End Address: 0x0000000100000000 Memory Device Mapping: #43 Memory Device: #35 Array Mapping: #41 Row: 1 Interleave Pos: 0 Interleaved Depth: 0 Start Address: 0x00000000 End Address: 0x10000000 Memory Device Mapping: #44 Memory Device: #36 Array Mapping: #41 Row: 2 Interleave Pos: 0 Interleaved Depth: 0 Start Address: 0x10000000 End Address: 0x20000000 Memory Device Mapping: #45 Memory Device: #37 Array Mapping: #41 Row: 3 Interleave Pos: 0 Interleaved Depth: 0 Start Address: 0x00000000 End Address: 0x00000400 Memory Device Mapping: #47 Memory Device: #40 Array Mapping: #42 Row: 1 Interleave Pos: 0 Interleaved Depth: 0 Start Address: 0x00000000fff80000 End Address: 0x0000000100000000 System Slot: #48 Designation: "AGP Slot J40" Type: 0x11 (AGP 4X) Bus Width: 0x05 (32 bit) Status: 0x03 (Available) Length: 0x03 (Short) Slot ID: 0 Characteristics: 0x0004 (3.3 V) System Slot: #50 Designation: "PCI Slot 1: J20" Type: 0x06 (PCI) Bus Width: 0x05 (32 bit) Status: 0x04 (In Use) Length: 0x03 (Short) Slot ID: 1 Characteristics: 0x0506 (5.0 V, 3.3 V, PME#) System Slot: #51 Designation: "PCI Slot 2: J21" Type: 0x06 (PCI) Bus Width: 0x05 (32 bit) Status: 0x03 (Available) Length: 0x03 (Short) Slot ID: 2 Characteristics: 0x0506 (5.0 V, 3.3 V, PME#) System Slot: #52 Designation: "PCI Slot 3: J22" Type: 0x06 (PCI) Bus Width: 0x05 (32 bit) Status: 0x03 (Available) Length: 0x03 (Short) Slot ID: 3 Characteristics: 0x0506 (5.0 V, 3.3 V, PME#) System Slot: #53 Designation: "PCI Slot 4: J23" Type: 0x06 (PCI) Bus Width: 0x05 (32 bit) Status: 0x04 (In Use) Length: 0x03 (Short) Slot ID: 4 Characteristics: 0x0506 (5.0 V, 3.3 V, PME#) System Slot: #54 Designation: "PCI Slot 5: J24" Type: 0x06 (PCI) Bus Width: 0x05 (32 bit) Status: 0x03 (Available) Length: 0x03 (Short) Slot ID: 5 Characteristics: 0x0506 (5.0 V, 3.3 V, PME#) Type 31 Record: #55 Data 00: 1f 1c 37 00 4b 00 00 00 54 78 00 f0 e4 95 0e 00 Data 10: 00 00 00 00 00 00 00 00 00 00 00 00 Type 32 Record: #56 Data 00: 20 0b 38 00 00 00 00 00 00 00 00 Type 128 Record: #57 Data 00: 80 1c 39 00 01 01 02 01 01 02 20 02 02 02 48 02 Data 10: 03 02 50 02 04 02 58 02 05 02 68 02 String 1: "Alert on LAN" String 2: "CPQ-CD00-SA-1" Config Status: cfg=new, avail=yes, need=no, active=unknown 04: None 00.0: 10107 System [Created at sys.59] Unique ID: rdCR.n_7QNeEnh23 Hardware Class: system Model: "System" Driver Info #0: Driver Status: thermal,fan are active Driver Activation Cmd: "modprobe thermal; modprobe fan" Config Status: cfg=new, avail=yes, need=no, active=unknown 05: None 00.0: 10104 FPU [Created at misc.192] Unique ID: rdCR.EMpH5pjcahD Hardware Class: unknown Model: "FPU" I/O Ports: 0xf0-0xff (rw) Config Status: cfg=new, avail=yes, need=no, active=unknown 06: None 00.0: 0801 DMA controller (8237) [Created at misc.206] Unique ID: rdCR.f5u1ucRm+H9 Hardware Class: unknown Model: "DMA controller" I/O Ports: 0x00-0x1f (rw) I/O Ports: 0xc0-0xdf (rw) I/O Ports: 0x80-0x8f (rw) DMA: 4 Config Status: cfg=new, avail=yes, need=no, active=unknown 07: None 00.0: 0800 PIC (8259) [Created at misc.219] Unique ID: rdCR.8uRK7LxiIA2 Hardware Class: unknown Model: "PIC" I/O Ports: 0x20-0x21 (rw) I/O Ports: 0xa0-0xa1 (rw) Config Status: cfg=new, avail=yes, need=no, active=unknown 08: None 00.0: 0802 Timer (8254) [Created at misc.230] Unique ID: rdCR.AJKleuxpiP0 Hardware Class: unknown Model: "Timer" IRQ: 0 (63 events) Config Status: cfg=new, avail=yes, need=no, active=unknown 09: None 00.0: 0803 RTC (Generic) [Created at misc.241] Unique ID: rdCR.hWmSPAStPX7 Hardware Class: unknown Model: "RTC" I/O Ports: 0x70-0x77 (rw) IRQ: 8 (1 event) Config Status: cfg=new, avail=yes, need=no, active=unknown 10: None 00.0: 0900 Keyboard controller [Created at misc.251] Unique ID: rdCR.9N+EecqykME Hardware Class: unknown Model: "Keyboard controller" I/O Ports: 0x60-0x6f (rw) Config Status: cfg=new, avail=yes, need=no, active=unknown 11: None 00.0: 0701 Parallel controller (SPP) [Created at misc.262] Unique ID: YMnp.ecK7NLYWZ5D Hardware Class: unknown Model: "Parallel controller" Device File: /dev/lp0 I/O Ports: 0x378-0x37a (rw) Config Status: cfg=new, avail=yes, need=no, active=unknown 12: None 00.0: 10400 PS/2 Controller [Created at misc.304] Unique ID: rdCR.DziBbWO85o5 Hardware Class: unknown Model: "PS/2 Controller" Config Status: cfg=new, avail=yes, need=no, active=unknown 14: None 00.0: 10102 Main Memory [Created at memory.61] Unique ID: rdCR.CxwsZFjVASF Hardware Class: memory Model: "Main Memory" Memory Range: 0x00000000-0x1fffffff (rw) Memory Size: 512 MB Config Status: cfg=new, avail=yes, need=no, active=unknown 15: PCI 00.0: 0600 Host bridge [Created at pci.281] Unique ID: qLht.v_Y7QGTsQ_D SysFS ID: /devices/pci0000:00/0000:00:00.0 SysFS BusID: 0000:00:00.0 Hardware Class: bridge Model: "Intel 82815 815 Chipset Host Bridge and Memory Controller Hub" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1130 "82815 815 Chipset Host Bridge and Memory Controller Hub" Revision: 0x02 Driver: "agpgart-intel" Driver Modules: "intel_agp" Module Alias: "pci:v00008086d00001130sv00000000sd00000000bc06sc00i00" Driver Info #0: Driver Status: intel_agp is active Driver Activation Cmd: "modprobe intel_agp" Config Status: cfg=new, avail=yes, need=no, active=unknown 16: PCI 1e.0: 0604 PCI bridge (Normal decode) [Created at pci.281] Unique ID: 6NW+.5mTGXo377UF SysFS ID: /devices/pci0000:00/0000:00:1e.0 SysFS BusID: 0000:00:1e.0 Hardware Class: bridge Model: "Intel 82801 PCI Bridge" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244e "82801 PCI Bridge" Revision: 0x01 Module Alias: "pci:v00008086d0000244Esv00000000sd00000000bc06sc04i00" Driver Info #0: Driver Status: shpchp is active Driver Activation Cmd: "modprobe shpchp" Config Status: cfg=new, avail=yes, need=no, active=unknown 17: PCI 1f.0: 0601 ISA bridge [Created at pci.281] Unique ID: BUZT.KKxeW_u4el4 SysFS ID: /devices/pci0000:00/0000:00:1f.0 SysFS BusID: 0000:00:1f.0 Hardware Class: bridge Model: "Intel 82801BA ISA Bridge (LPC)" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2440 "82801BA ISA Bridge (LPC)" Revision: 0x01 Module Alias: "pci:v00008086d00002440sv00000000sd00000000bc06sc01i00" Driver Info #0: Driver Status: iTCO_wdt is active Driver Activation Cmd: "modprobe iTCO_wdt" Driver Info #1: Driver Status: intel_rng is active Driver Activation Cmd: "modprobe intel_rng" Config Status: cfg=new, avail=yes, need=no, active=unknown 18: PCI 1f.1: 0101 IDE interface [Created at pci.281] Unique ID: 3p2J.tH5+ziGnAT8 SysFS ID: /devices/pci0000:00/0000:00:1f.1 SysFS BusID: 0000:00:1f.1 Hardware Class: storage Model: "Intel 82801BA IDE U100" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x244b "82801BA IDE U100" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x2411 Revision: 0x01 Driver: "PIIX_IDE" Driver Modules: "piix" I/O Ports: 0x1f0-0x1f7 (rw) I/O Port: 0x3f6 (rw) I/O Ports: 0x170-0x177 (rw) I/O Port: 0x376 (rw) I/O Ports: 0x2460-0x246f (rw) IRQ: 14 (8314 events) IRQ: 15 (91 events) Module Alias: "pci:v00008086d0000244Bsv00008086sd00002411bc01sc01i80" Driver Info #0: Driver Status: piix is active Driver Activation Cmd: "modprobe piix" Driver Info #1: Driver Status: ata_generic is active Driver Activation Cmd: "modprobe ata_generic" Driver Info #2: Driver Status: generic is active Driver Activation Cmd: "modprobe generic" Config Status: cfg=new, avail=yes, need=no, active=unknown 19: PCI 1f.4: 0c03 USB Controller (UHCI) [Created at pci.281] Unique ID: fnWp.T65Wf0Mfep6 SysFS ID: /devices/pci0000:00/0000:00:1f.4 SysFS BusID: 0000:00:1f.4 Hardware Class: usb controller Model: "Intel 82801BA/BAM USB (Hub #2)" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2444 "82801BA/BAM USB (Hub #2)" SubVendor: pci 0x8086 "Intel Corporation" SubDevice: pci 0x2411 Revision: 0x01 Driver: "uhci_hcd" Driver Modules: "uhci_hcd" I/O Ports: 0x2440-0x245f (rw) IRQ: 17 (no events) Module Alias: "pci:v00008086d00002444sv00008086sd00002411bc0Csc03i00" Driver Info #0: Driver Status: uhci-hcd is active Driver Activation Cmd: "modprobe uhci-hcd" Config Status: cfg=new, avail=yes, need=no, active=unknown 20: PCI 1f.5: 0401 Multimedia audio controller [Created at pci.281] Unique ID: W60f.p5TvhClMSjB SysFS ID: /devices/pci0000:00/0000:00:1f.5 SysFS BusID: 0000:00:1f.5 Hardware Class: sound Model: "Compaq 82801BA/BAM AC'97 Audio" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2445 "82801BA/BAM AC'97 Audio" SubVendor: pci 0x0e11 "Compaq Computer Corporation" SubDevice: pci 0x000b Revision: 0x01 Driver: "Intel ICH" Driver Modules: "snd_intel8x0" I/O Ports: 0x2000-0x20ff (rw) I/O Ports: 0x2400-0x243f (rw) IRQ: 19 (no events) Module Alias: "pci:v00008086d00002445sv00000E11sd0000000Bbc04sc01i00" Driver Info #0: Driver Status: snd_intel8x0 is active Driver Activation Cmd: "modprobe snd_intel8x0" Config Status: cfg=new, avail=yes, need=no, active=unknown 21: PCI 204.0: 0300 VGA compatible controller (VGA) [Created at pci.281] Unique ID: UVH2.HkBKmes3CN2 Parent ID: 6NW+.5mTGXo377UF SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:04.0 SysFS BusID: 0000:02:04.0 Hardware Class: graphics card Model: "nVidia GeForce4 MX 420" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x0172 "GeForce4 MX 420" Revision: 0xa3 Memory Range: 0x40000000-0x40ffffff (rw,non-prefetchable) Memory Range: 0x48000000-0x4fffffff (rw,prefetchable) Memory Range: 0x41500000-0x4157ffff (rw,prefetchable) Memory Range: 0x41600000-0x4161ffff (ro,prefetchable,disabled) IRQ: 5 (no events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v000010DEd00000172sv00000000sd00000000bc03sc00i00" Driver Info #0: XFree86 v4 Server Module: nv Driver Info #1: XFree86 v4 Server Module: nvidia 3D Support: yes Color Depths: 16 Extensions: Options: Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) 22: PCI 208.0: 0200 Ethernet controller [Created at pci.281] Unique ID: rBUF.xuoNXTox6+6 Parent ID: 6NW+.5mTGXo377UF SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:08.0 SysFS BusID: 0000:02:08.0 Hardware Class: network Model: "Compaq EtherExpress PRO/100 VM" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x2449 "82801BA/BAM/CA/CAM Ethernet Controller" SubVendor: pci 0x0e11 "Compaq Computer Corporation" SubDevice: pci 0x0012 "EtherExpress PRO/100 VM" Revision: 0x01 Driver: "e100" Driver Modules: "e100" Device File: eth0 Memory Range: 0x41000000-0x41000fff (rw,non-prefetchable) I/O Ports: 0x1000-0x1fff (rw) IRQ: 16 (1457 events) HW Address: 00:02:a5:10:5a:37 Link detected: yes Module Alias: "pci:v00008086d00002449sv00000E11sd00000012bc02sc00i00" Driver Info #0: Driver Status: e100 is active Driver Activation Cmd: "modprobe e100" Driver Info #1: Driver Status: eepro100 is not active Driver Activation Cmd: "modprobe eepro100" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) 23: PCI 20b.0: 0180 Unknown mass storage controller [Created at pci.281] Unique ID: 1HdK.dC1pu2GvTC6 Parent ID: 6NW+.5mTGXo377UF SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:0b.0 SysFS BusID: 0000:02:0b.0 Hardware Class: storage Model: "Silicon Image SiI 3112 SATALink Controller" Vendor: pci 0x1095 "Silicon Image, Inc." Device: pci 0x3112 "SiI 3112 [SATALink/SATARaid] Serial ATA Controller" SubVendor: pci 0x1095 "Silicon Image, Inc." SubDevice: pci 0x3112 "SiI 3112 SATALink Controller" Revision: 0x02 Driver: "sata_sil" Driver Modules: "sata_sil" I/O Ports: 0x1050-0x1057 (rw) I/O Ports: 0x1060-0x1063 (rw) I/O Ports: 0x1058-0x105f (rw) I/O Ports: 0x1064-0x1067 (rw) I/O Ports: 0x1040-0x104f (rw) Memory Range: 0x41100000-0x411001ff (rw,non-prefetchable) Memory Range: 0x41580000-0x415fffff (ro,prefetchable,disabled) IRQ: 18 (17 events) Module Alias: "pci:v00001095d00003112sv00001095sd00003112bc01sc80i00" Driver Info #0: Driver Status: sata_sil is active Driver Activation Cmd: "modprobe sata_sil" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #16 (PCI bridge) 24: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: z9pp.QBqTp8zQt87 SysFS ID: /devices/pnp0/00:00 SysFS BusID: 00:00 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0a03 Config Status: cfg=new, avail=yes, need=no, active=unknown 25: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: QL3u.DE8RM9cWQQ8 SysFS ID: /devices/pnp0/00:01 SysFS BusID: 00:01 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0c04 Config Status: cfg=new, avail=yes, need=no, active=unknown 26: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: tWJy.ld94kxNGZf5 SysFS ID: /devices/pnp0/00:02 SysFS BusID: 00:02 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0200 Config Status: cfg=new, avail=yes, need=no, active=unknown 27: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: KiZ0.WYwRElrJa93 SysFS ID: /devices/pnp0/00:03 SysFS BusID: 00:03 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0b00 Config Status: cfg=new, avail=yes, need=no, active=unknown 28: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: ntp4.bvKf3UMzZfE SysFS ID: /devices/pnp0/00:04 SysFS BusID: 00:04 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0800 Config Status: cfg=new, avail=yes, need=no, active=unknown 29: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: E349.t7Yh1tpgb13 SysFS ID: /devices/pnp0/00:05 SysFS BusID: 00:05 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0f13 Config Status: cfg=new, avail=yes, need=no, active=unknown 30: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: hEKD.xhndlW9HXJ7 SysFS ID: /devices/pnp0/00:06 SysFS BusID: 00:06 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0303 Config Status: cfg=new, avail=yes, need=no, active=unknown 31: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: NhVi.YgT1Hy0M6x6 SysFS ID: /devices/pnp0/00:07 SysFS BusID: 00:07 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0401 Config Status: cfg=new, avail=yes, need=no, active=unknown 32: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: qslm.BuKI+1soRmD SysFS ID: /devices/pnp0/00:08 SysFS BusID: 00:08 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0501 Config Status: cfg=new, avail=yes, need=no, active=unknown 33: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: H20r.BuKI+1soRmD SysFS ID: /devices/pnp0/00:09 SysFS BusID: 00:09 Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0501 Config Status: cfg=new, avail=yes, need=no, active=unknown 34: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: iT2w.yhTOLOXWEq7 SysFS ID: /devices/pnp0/00:0a SysFS BusID: 00:0a Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0700 Config Status: cfg=new, avail=yes, need=no, active=unknown 35: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: 9fI_.jDhFyyFrbg5 SysFS ID: /devices/pnp0/00:0b SysFS BusID: 00:0b Hardware Class: unknown Model: "Unclassified device" SubVendor: INT SubDevice: eisa 0x0800 Config Status: cfg=new, avail=yes, need=no, active=unknown 36: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: cqY2.03CraFgwWp2 SysFS ID: /devices/pnp0/00:0c SysFS BusID: 00:0c Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0003 Config Status: cfg=new, avail=yes, need=no, active=unknown 37: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: 30p6.B+yZ9Ve8gC1 SysFS ID: /devices/pnp0/00:0d SysFS BusID: 00:0d Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0c02 Config Status: cfg=new, avail=yes, need=no, active=unknown 38: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: XB3B.B+yZ9Ve8gC1 SysFS ID: /devices/pnp0/00:0e SysFS BusID: 00:0e Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0c02 Config Status: cfg=new, avail=yes, need=no, active=unknown 39: ISA(PnP) 00.0: 0000 Unclassified device [Created at isapnp.142] Unique ID: _MJF.gNN83gfynbD SysFS ID: /devices/pnp0/00:0f SysFS BusID: 00:0f Hardware Class: unknown Model: "PnP Unclassified device" SubVendor: PNP "PnP" SubDevice: eisa 0x0c01 Config Status: cfg=new, avail=yes, need=no, active=unknown 40: None 00.0: 0700 Serial controller (16550) [Created at serial.74] Unique ID: S_Uw.3fyvFV+mbWD Hardware Class: unknown Model: "16550A" Device: "16550A" Device File: /dev/ttyS0 I/O Ports: 0x3f8-0x3ff (rw) IRQ: 4 (46 events) Config Status: cfg=new, avail=yes, need=no, active=unknown 41: None 00.1: 0700 Serial controller (16550) [Created at serial.74] Unique ID: v9l_.3fyvFV+mbWD Hardware Class: unknown Model: "16550A" Device: "16550A" Device File: /dev/ttyS1 I/O Ports: 0x2f8-0x2ff (rw) IRQ: 3 (53 events) Config Status: cfg=new, avail=yes, need=no, active=unknown 42: IDE 00.0: 10600 Disk [Created at block.218] Unique ID: l_yX.4e5ZNlI9j28 Parent ID: 3p2J.tH5+ziGnAT8 SysFS ID: /block/hda SysFS BusID: 0.0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.0 Hardware Class: disk Model: "Maxtor 34098H4" Vendor: "Maxtor" Device: "34098H4" Revision: "YAH814Y0" Serial ID: "L41GNGNC" Driver: "PIIX_IDE", "ide-disk" Driver Modules: "piix", "ide_disk" Device File: /dev/hda Device Files: /dev/hda, /dev/disk/by-id/ata-Maxtor_34098H4_L41GNGNC, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0 Device Number: block 3:0-3:63 BIOS id: 0x80 Size: 80043264 sectors a 512 bytes Geometry (Physical): CHS 79408/16/63 Geometry (Logical): CHS 79408/16/63 Cache: 2048 kb Geometry (BIOS EDD): CHS 79408/16/63 Size (BIOS EDD): 80043264 sectors Geometry (BIOS Legacy): CHS 1023/240/63 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (IDE interface) 43: None 00.0: 11300 Partition [Created at block.387] Unique ID: 0fbI.SE1wIdpsiiC Parent ID: l_yX.4e5ZNlI9j28 SysFS ID: /block/hda/hda1 Hardware Class: partition Model: "Partition" Device File: /dev/hda1 Device Files: /dev/hda1, /dev/disk/by-id/ata-Maxtor_34098H4_L41GNGNC-part1, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0-part1, /dev/disk/by-uuid/7f301809-f0ed-4369-947b-73ce0aa2ba7d Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #42 (Disk) 44: None 00.0: 11300 Partition [Created at block.387] Unique ID: TqrM.SE1wIdpsiiC Parent ID: l_yX.4e5ZNlI9j28 SysFS ID: /block/hda/hda2 Hardware Class: partition Model: "Partition" Device File: /dev/hda2 Device Files: /dev/hda2, /dev/disk/by-id/ata-Maxtor_34098H4_L41GNGNC-part2, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0-part2 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #42 (Disk) 45: None 00.0: 11300 Partition [Created at block.387] Unique ID: rMcZ.SE1wIdpsiiC Parent ID: l_yX.4e5ZNlI9j28 SysFS ID: /block/hda/hda5 Hardware Class: partition Model: "Partition" Device File: /dev/hda5 Device Files: /dev/hda5, /dev/disk/by-id/ata-Maxtor_34098H4_L41GNGNC-part5, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:0-part5, /dev/disk/by-uuid/ccb7f3d8-934f-4ba5-82d7-11de1f8db96c Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #42 (Disk) 46: IDE 01.0: 10600 Disk [Created at block.218] Unique ID: u0Ql.A1vk7ViRbo2 Parent ID: 3p2J.tH5+ziGnAT8 SysFS ID: /block/hdb SysFS BusID: 0.1 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide0/0.1 Hardware Class: disk Model: "WDC WD200BB-00DEA0" Vendor: "WDC" Device: "WD200BB-00DEA0" Revision: "05.03E05" Serial ID: "WD-WMAD1J586248" Driver: "PIIX_IDE", "ide-disk" Driver Modules: "piix", "ide_disk" Device File: /dev/hdb Device Files: /dev/hdb, /dev/disk/by-id/ata-WDC_WD200BB-00DEA0_WD-WMAD1J586248, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:1 Device Number: block 3:64-3:127 BIOS id: 0x81 Size: 39102336 sectors a 512 bytes Geometry (Physical): CHS 38792/16/63 Geometry (Logical): CHS 38792/16/63 Cache: 8192 kb Geometry (BIOS EDD): CHS 38792/16/63 Size (BIOS EDD): 39102336 sectors Geometry (BIOS Legacy): CHS 1023/240/63 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (IDE interface) 47: None 00.0: 11300 Partition [Created at block.387] Unique ID: 66wj.SE1wIdpsiiC Parent ID: u0Ql.A1vk7ViRbo2 SysFS ID: /block/hdb/hdb1 Hardware Class: partition Model: "Partition" Device File: /dev/hdb1 Device Files: /dev/hdb1, /dev/disk/by-id/ata-WDC_WD200BB-00DEA0_WD-WMAD1J586248-part1, /dev/disk/by-path/pci-0000:00:1f.1-ide-0:1-part1 Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #46 (Disk) 48: IDE 02.0: 10602 CD-ROM [Created at block.222] Unique ID: 90A1.e9o95b7dqsE Parent ID: 3p2J.tH5+ziGnAT8 SysFS ID: /block/hdc SysFS BusID: 1.0 SysFS Device Link: /devices/pci0000:00/0000:00:1f.1/ide1/1.0 Hardware Class: cdrom Model: "COMPAQ SC-148F" Vendor: "COMPAQ" Device: "SC-148F" Revision: "FA07" Serial ID: "" Driver: "PIIX_IDE", "ide-cdrom" Driver Modules: "piix", "ide_cd" Device File: /dev/hdc Device Files: /dev/hdc, /dev/disk/by-path/pci-0000:00:1f.1-ide-1:0, /dev/cdrom1 Device Number: block 22:0 Size: 0 sectors a 512 bytes Drive status: no medium Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (IDE interface) Drive Speed: 1 49: USB 00.0: 10a00 Hub [Created at usb.122] Unique ID: k4bc.x4osGG1+6q8 Parent ID: fnWp.T65Wf0Mfep6 SysFS ID: /devices/pci0000:00/0000:00:1f.4/usb1/1-0:1.0 SysFS BusID: 1-0:1.0 Hardware Class: hub Model: "Linux 2.6.22-3-686 uhci_hcd UHCI Host Controller" Hotplug: USB Vendor: "Linux 2.6.22-3-686 uhci_hcd" Device: "UHCI Host Controller" Revision: "2.06" Serial ID: "0000:00:1f.4" Driver: "hub" Driver Modules: "usbcore" Speed: 12 Mbps Module Alias: "usb:v0000p0000d0206dc09dsc00dp00ic09isc00ip00" Driver Info #0: Driver Status: usbcore is active Driver Activation Cmd: "modprobe usbcore" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #19 (USB Controller) 50: PS/2 00.0: 10800 Keyboard [Created at input.139] Unique ID: nLyy.TBWTwSuMeW2 Hardware Class: keyboard Model: "AT Translated Set 2 keyboard" Vendor: int 0x0211 Device: int 0x0001 "AT Translated Set 2 keyboard" Device File: /dev/input/event0 Device Files: /dev/input/event0, /dev/input/by-path/platform-i8042-serio-0-event-kbd Device Number: char 13:64 Driver Info #0: XkbRules: xfree86 XkbModel: pc104 Config Status: cfg=new, avail=yes, need=no, active=unknown 51: PS/2 00.0: 10500 PS/2 Mouse [Created at input.159] Unique ID: AH6Q.GNlNOiDK6yC Hardware Class: mouse Model: "PS2++ Logitech MX Mouse" Vendor: int 0x0210 Device: int 0x0018 "PS2++ Logitech MX Mouse" Device File: /dev/input/mice (/dev/input/mouse0) Device Files: /dev/input/mice, /dev/input/mouse0, /dev/input/event1, /dev/input/by-path/platform-i8042-serio-1-event-mouse, /dev/input/by-path/platform-i8042-serio-1-mouse Device Number: char 13:63 (char 13:32) Driver Info #0: Buttons: 8 Wheels: 1 XFree86 Protocol: explorerps/2 GPM Protocol: exps2 Config Status: cfg=new, avail=yes, need=no, active=unknown 52: None 00.0: 10103 CPU [Created at cpu.305] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: Intel Vendor: "GenuineIntel" Model: 6.8.10 "Celeron (Coppermine)" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,mmx,fxsr,sse,up Clock: 847 MHz BogoMips: 1696.43 Cache: 128 kb Config Status: cfg=new, avail=yes, need=no, active=unknown 53: None 00.0: 10700 Loopback [Created at net.119] Unique ID: ZsBS.GQNx7L4uPNA SysFS ID: /class/net/lo Hardware Class: network interface Model: "Loopback network interface" Device File: lo Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown 54: None 00.0: 10701 Ethernet [Created at net.119] Unique ID: usDW.ndpeucax6V1 Parent ID: rBUF.xuoNXTox6+6 SysFS ID: /class/net/eth0 SysFS Device Link: /devices/pci0000:00/0000:00:1e.0/0000:02:08.0 Hardware Class: network interface Model: "Ethernet network interface" Driver: "e100" Driver Modules: "e100" Device File: eth0 HW Address: 00:02:a5:10:5a:37 Link detected: yes Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #22 (Ethernet controller)