From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tejun Heo Subject: Re: Sil4726 ahci driver initialization sequence Date: Fri, 30 Nov 2007 09:48:27 +0900 Message-ID: <474F5DDB.2090408@gmail.com> References: <5501535d0711290927u613e61d1h2368eebc26bd4982@mail.gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Return-path: Received: from rv-out-0910.google.com ([209.85.198.184]:33478 "EHLO rv-out-0910.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1761736AbXK3Ase (ORCPT ); Thu, 29 Nov 2007 19:48:34 -0500 Received: by rv-out-0910.google.com with SMTP id k20so1751653rvb for ; Thu, 29 Nov 2007 16:48:34 -0800 (PST) In-Reply-To: <5501535d0711290927u613e61d1h2368eebc26bd4982@mail.gmail.com> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Bjoern Olausson Cc: IDE/ATA development list Bjoern Olausson wrote: > I managed to install WinXP and I think I got the driver to work on WindowsXP. > The installation was ony possible in IDE Enhaced mode. I wasn't able > to feed XP the Intel Matrix Storage controller during installation to > use XP wiith AHCI mode. > > I searched around for instructions on how to upgrade the jmb firmware > but without luck. Thougt I upgraded the BIOS of the P5W-DH Mainboard > to the latest one (Actually I don't know what Asus changed [Asus does > not provide changelogs]) JMB? That's Jmicron. What should be updated is the SIMG4726 firmware. -- tejun