Re: [PATCH pata-2.6] hpt366: fix HPT37x PIO mode timings

[Sergei Shtylyov <sshtylyov@ru.mvista.com>]

Hello, I wrote:

> After looking into the HPT370 manual (now that I have it) and re-checking all
> the timing tables, here's what I have discovered:

> - at 33 MHz clock, PIO mode 0 timings turned to be overclocked, and all other
>   PIO modes underclocked;

> - at 50 MHz clock, PIO modes 0 to 2 turned to be oveclocked;

    Argh, just noticed that PIO0 setup time is still overclocked at 33/50 
MHz... :-/

> - at 66 MHz clock, PIO mode 0 was oveclocked too.

> Finally, the taskfile timing (matching PIO mode 0) turned to be overclocked at
> all clock frequencies (and in all manuals)...

> The new timings have been tested on HPT370 chip (at 33 MHz PCI clock) and on
> HPT371N chip (at both 50 and 66 MHz DPLL clock).

> Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>

    Will post the updated patch later...

MBR, Sergei