* Re: Maybe Sorry for that but where should i write .)
[not found] ` <477786B8.9040000@panasas.com>
@ 2008-01-02 7:14 ` Tejun Heo
2008-01-02 13:54 ` Alan Cox
0 siblings, 1 reply; 2+ messages in thread
From: Tejun Heo @ 2008-01-02 7:14 UTC (permalink / raw)
To: Boaz Harrosh; +Cc: thanatos, linux-scsi, IDE/ATA development list, Alan Cox
Boaz Harrosh wrote:
> On Sat, Dec 29 2007 at 3:50 +0200, thanatos <thanatos@trollprod.org> wrote:
>> I got a sata controller ignitio
>>
>> 00:11.0 SATA controller: Initio Corporation INI-1623 PCI SATA-II
>> Controller (rev 02) (prog-if 00 [Vendor specific])
>> Subsystem: Initio Corporation INI-1623 PCI SATA-II Controller
>> Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 11
>> I/O ports at dc00 [size=256]
>> I/O ports at d800 [size=256]
>> I/O ports at d400 [size=256]
>> I/O ports at d000 [size=256]
>> I/O ports at cc00 [size=256]
>> Memory at cffff000 (32-bit, non-prefetchable) [size=4K]
>> Expansion ROM at cff80000 [disabled] [size=256K]
>> Capabilities: [dc] Power Management version 2
>>
>>
>> and an "no yet usable" 320 hdd, cause of lba48
>>
>> ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> ata3.00: HPA unlocked: 625142448 -> 625142448, native 18446744072354982576
>> ata3.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
>> ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32)
>> ata3.00: ERROR: This driver doesn't support LBA48 yet and may cause
>> data corruption on such devices. Disabling.
>> ata3.00: disabled
>>
>> i'm still on kernel 2.6.22. i had look on changelog 2.6.23 and even
>> 2.6.24 nothing for that, is theyre a roadmap ?
>>
>> so if i could help in any way testing patch. i'm theyre
>
> cc: the linux-scsi mailing list.
>
> Personally I have nothing to do with this driver, I only sent a fix
> for a patch in 2.6.23
Actually, the correct mailing list is linux-ide. Alan Cox began working
on the driver. Cc'ing both.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 2+ messages in thread