1:3:0:0: [sde] Synchronizing SCSI cache
sd 1:3:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00
sd 1:3:0:0: [sde] Stopping disk
sd 1:3:0:0: [sde] START_STOP FAILED
sd 1:3:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00
ata1.00: failed to read SCR 1 (Emask=0x40)
ata1.01: failed to read SCR 1 (Emask=0x40)
ata1.02: failed to read SCR 1 (Emask=0x40)
ata1.03: failed to read SCR 1 (Emask=0x40)
ata1.04: failed to read SCR 1 (Emask=0x40)
ata1.05: failed to read SCR 1 (Emask=0x40)
ata1.06: failed to read SCR 1 (Emask=0x40)
ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
ata1.15: irq_stat 0x01940090, PHY RDY changed
ata1: SError: { 10B8B }
ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 1 SControl 10)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: retrying hardreset in 5 secs
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 1 SControl 10)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: retrying hardreset in 5 secs
ata1.15: hard resetting link
ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
ata1.00: hard resetting link
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.01: hard resetting link
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.02: hard resetting link
ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.03: hard resetting link
ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.04: hard resetting link
ata1.04: SATA link down (SStatus 0 SControl 310)
ata1.05: hard resetting link
ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
ata1.06: hard resetting link
ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1.00: revalidation failed (errno=-5)
ata1.01: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1.01: revalidation failed (errno=-5)
ata1.02: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1.02: revalidation failed (errno=-5)
ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1.05: device is on DMA blacklist, disabling DMA
ata1.05: configured for PIO4
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: hard resetting link
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.01: hard resetting link
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.02: hard resetting link
ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.03: hard resetting link
ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1.02: configured for UDMA/100
ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1: failed to recover some devices, retrying in 5 secs
ata1.03: hard resetting link
ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1: failed to recover some devices, retrying in 5 secs
ata1.03: hard resetting link
ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1: EH complete
sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
sd 1:1:0:0: [sdc] Write Protect is off
sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 1:2:0:0: [sdd] Write Protect is off
sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
sd 1:5:0:0: [sdf] Write Protect is off
sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
sd 1:1:0:0: [sdc] Write Protect is off
sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 1:2:0:0: [sdd] Write Protect is off
sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
sd 1:5:0:0: [sdf] Write Protect is off
sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: failed to read SCR 1 (Emask=0x40)
ata1.01: failed to read SCR 1 (Emask=0x40)
ata1.02: failed to read SCR 1 (Emask=0x40)
ata1.03: failed to read SCR 1 (Emask=0x40)
ata1.04: failed to read SCR 1 (Emask=0x40)
ata1.05: failed to read SCR 1 (Emask=0x40)
ata1.06: failed to read SCR 1 (Emask=0x40)
ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
ata1.15: irq_stat 0x01140010, PHY RDY changed
ata1: SError: { 10B8B }
ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 1 SControl 10)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: retrying hardreset in 5 secs
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 1 SControl 10)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: retrying hardreset in 5 secs
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 1 SControl 10)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: retrying hardreset in 5 secs
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 1 SControl 10)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: retrying hardreset in 5 secs
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 1 SControl 10)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: failed to recover PMP after 5 tries, giving up
ata1.15: Port Multiplier detaching
ata1.00: disabled
ata1.01: disabled
ata1.02: disabled
ata1.05: disabled
ata1.00: disabled
ata1: hard resetting link
ata1: SATA link down (SStatus 1 SControl 0)
ata1: EH complete
ata1.00: detaching (SCSI 1:0:0:0)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
sd 1:0:0:0: [sdb] Stopping disk
sd 1:0:0:0: [sdb] START_STOP FAILED
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
ata1.01: detaching (SCSI 1:1:0:0)
sd 1:1:0:0: [sdc] Synchronizing SCSI cache
sd 1:1:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
sd 1:1:0:0: [sdc] Stopping disk
sd 1:1:0:0: [sdc] START_STOP FAILED
sd 1:1:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
ata1.02: detaching (SCSI 1:2:0:0)
sd 1:2:0:0: [sdd] Synchronizing SCSI cache
sd 1:2:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
sd 1:2:0:0: [sdd] Stopping disk
sd 1:2:0:0: [sdd] START_STOP FAILED
sd 1:2:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
ata1.05: detaching (SCSI 1:5:0:0)
sd 1:5:0:0: [sdf] Stopping disk
sd 1:5:0:0: [sdf] START_STOP FAILED
sd 1:5:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
ata1: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata1: irq_stat 0x00a40080, device exchanged
ata1: SError: { PHYRdyChg }
ata1: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata1.15: Port Multiplier 1.1, 0x1095:0x4726 r31, 7 ports, feat 0x1/0x9
ata1.00: hard resetting link
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.01: hard resetting link
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.02: hard resetting link
ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.03: hard resetting link
ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.04: hard resetting link
ata1.04: SATA link down (SStatus 0 SControl 320)
ata1.05: hard resetting link
ata1.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata1.06: hard resetting link
ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1.01: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1.02: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1.05: ATA-6: Config  Disk, PLS12061, max UDMA/133
ata1.05: 640 sectors, multi 1: LBA 
ata1.05: device is on DMA blacklist, disabling DMA
ata1.05: configured for PIO4
ata1: failed to recover some devices, retrying in 5 secs
ata1.00: hard resetting link
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.01: hard resetting link
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.02: hard resetting link
ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.03: hard resetting link
ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.00: ATA-7: ST3300831A, 3.03, max UDMA/100
ata1.00: 586072368 sectors, multi 0: LBA48 
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
ata1.01: ATA-7: ST3300831A, 3.03, max UDMA/100
ata1.01: 586072368 sectors, multi 0: LBA48 
ata1.01: applying bridge limits
ata1.01: configured for UDMA/100
ata1.02: ATA-7: ST3300622A, 3.AND, max UDMA/100
ata1.02: 586072368 sectors, multi 0: LBA48 
ata1.02: applying bridge limits
ata1.02: configured for UDMA/100
ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1.05: device is on DMA blacklist, disabling DMA
ata1.05: configured for PIO4
ata1: failed to recover some devices, retrying in 5 secs
ata1.03: hard resetting link
ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1.02: configured for UDMA/100
ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11)
ata1: failed to recover some devices, retrying in 5 secs
ata1.03: hard resetting link
ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1: EH complete
scsi 1:0:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg2 type 0
scsi 1:1:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
sd 1:1:0:0: [sdc] Write Protect is off
sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
sd 1:1:0:0: [sdc] Write Protect is off
sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 1:1:0:0: [sdc] Attached SCSI disk
sd 1:1:0:0: Attached scsi generic sg3 type 0
scsi 1:2:0:0: Direct-Access     ATA      ST3300622A       3.AN PQ: 0 ANSI: 5
sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 1:2:0:0: [sdd] Write Protect is off
sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 1:2:0:0: [sdd] Write Protect is off
sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 1:2:0:0: [sdd] Attached SCSI disk
sd 1:2:0:0: Attached scsi generic sg4 type 0
scsi 1:5:0:0: Direct-Access     ATA      Config  Disk     PLS1 PQ: 0 ANSI: 5
sd 1:5:0:0: [sde] 640 512-byte hardware sectors (0 MB)
sd 1:5:0:0: [sde] Write Protect is off
sd 1:5:0:0: [sde] Mode Sense: 00 3a 00 00
sd 1:5:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:5:0:0: [sde] 640 512-byte hardware sectors (0 MB)
sd 1:5:0:0: [sde] Write Protect is off
sd 1:5:0:0: [sde] Mode Sense: 00 3a 00 00
sd 1:5:0:0: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sde: unknown partition table
sd 1:5:0:0: [sde] Attached SCSI disk
sd 1:5:0:0: Attached scsi generic sg5 type 0
ata1.00: failed to read SCR 1 (Emask=0x40)
ata1.01: failed to read SCR 1 (Emask=0x40)
ata1.02: failed to read SCR 1 (Emask=0x40)
ata1.03: failed to read SCR 1 (Emask=0x40)
ata1.04: failed to read SCR 1 (Emask=0x40)
ata1.05: failed to read SCR 1 (Emask=0x40)
ata1.06: failed to read SCR 1 (Emask=0x40)
ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xa frozen
ata1.15: irq_stat 0x01b40090, PHY RDY changed
ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 0 SControl 0)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: retrying hardreset in 5 secs
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 0 SControl 0)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: limiting SATA link speed to 1.5 Gbps
ata1.15: retrying hardreset in 5 secs
ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata2: irq_stat 0x00a40080, device exchanged
ata2: SError: { PHYRdyChg }
ata2: hard resetting link
ata1.15: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata2.15: Port Multiplier 1.1, 0x1095:0x4726 r31, 7 ports, feat 0x1/0x9
ata2.00: hard resetting link
ata1.15: SATA link down (SStatus 0 SControl 10)
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata2.01: hard resetting link
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: retrying hardreset in 5 secs
ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.02: hard resetting link
ata2.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.03: hard resetting link
ata2.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.04: hard resetting link
ata2.04: SATA link down (SStatus 0 SControl 320)
ata2.05: hard resetting link
ata2.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata2.06: hard resetting link
ata2.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata2.00: ATA-7: ST3300831A, 3.03, max UDMA/100
ata2.00: 586072368 sectors, multi 0: LBA48 
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
ata2.01: ATA-7: ST3300831A, 3.03, max UDMA/100
ata2.01: 586072368 sectors, multi 0: LBA48 
ata2.01: applying bridge limits
ata2.01: configured for UDMA/100
ata2.02: ATA-7: ST3300622A, 3.AND, max UDMA/100
ata2.02: 586072368 sectors, multi 0: LBA48 
ata2.02: applying bridge limits
ata2.02: configured for UDMA/100
ata2.03: ATA-7: ST3300622A, 3.AND, max UDMA/100
ata2.03: 586072368 sectors, multi 0: LBA48 
ata2.03: applying bridge limits
ata2.03: configured for UDMA/100
ata2.05: ATA-6: Config  Disk, PLS12061, max UDMA/133
ata2.05: 640 sectors, multi 1: LBA 
ata2.05: device is on DMA blacklist, disabling DMA
ata2.05: configured for PIO4
ata2: EH complete
scsi 2:0:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdf] 586072368 512-byte hardware sectors (300069 MB)
sd 2:0:0:0: [sdf] Write Protect is off
sd 2:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdf] 586072368 512-byte hardware sectors (300069 MB)
sd 2:0:0:0: [sdf] Write Protect is off
sd 2:0:0:0: [sdf] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdf: sdf1
sd 2:0:0:0: [sdf] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg6 type 0
scsi 2:1:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
sd 2:1:0:0: [sdg] 586072368 512-byte hardware sectors (300069 MB)
sd 2:1:0:0: [sdg] Write Protect is off
sd 2:1:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 2:1:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:1:0:0: [sdg] 586072368 512-byte hardware sectors (300069 MB)
sd 2:1:0:0: [sdg] Write Protect is off
sd 2:1:0:0: [sdg] Mode Sense: 00 3a 00 00
sd 2:1:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdg: sdg1
sd 2:1:0:0: [sdg] Attached SCSI disk
sd 2:1:0:0: Attached scsi generic sg7 type 0
scsi 2:2:0:0: Direct-Access     ATA      ST3300622A       3.AN PQ: 0 ANSI: 5
sd 2:2:0:0: [sdh] 586072368 512-byte hardware sectors (300069 MB)
sd 2:2:0:0: [sdh] Write Protect is off
sd 2:2:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 2:2:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:2:0:0: [sdh] 586072368 512-byte hardware sectors (300069 MB)
sd 2:2:0:0: [sdh] Write Protect is off
sd 2:2:0:0: [sdh] Mode Sense: 00 3a 00 00
sd 2:2:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdh: sdh1
sd 2:2:0:0: [sdh] Attached SCSI disk
sd 2:2:0:0: Attached scsi generic sg8 type 0
scsi 2:3:0:0: Direct-Access     ATA      ST3300622A       3.AN PQ: 0 ANSI: 5
sd 2:3:0:0: [sdi] 586072368 512-byte hardware sectors (300069 MB)
sd 2:3:0:0: [sdi] Write Protect is off
sd 2:3:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 2:3:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 2:3:0:0: [sdi] 586072368 512-byte hardware sectors (300069 MB)
sd 2:3:0:0: [sdi] Write Protect is off
sd 2:3:0:0: [sdi] Mode Sense: 00 3a 00 00
sd 2:3:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdi: sdi1
sd 2:3:0:0: [sdi] Attached SCSI disk
sd 2:3:0:0: Attached scsi generic sg9 type 0
scsi 2:5:0:0: Direct-Access     ATA      Config  Disk     PLS1 PQ: 0 ANSI: 5
sd 2:5:0:0: [sdj] 640 512-byte hardware sectors (0 MB)
sd 2:5:0:0: [sdj] Write Protect is off
sd 2:5:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 2:5:0:0: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:5:0:0: [sdj] 640 512-byte hardware sectors (0 MB)
sd 2:5:0:0: [sdj] Write Protect is off
sd 2:5:0:0: [sdj] Mode Sense: 00 3a 00 00
sd 2:5:0:0: [sdj] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdj: unknown partition table
sd 2:5:0:0: [sdj] Attached SCSI disk
sd 2:5:0:0: Attached scsi generic sg10 type 0
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 0 SControl 10)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: retrying hardreset in 5 secs
ata1.15: hard resetting link
ata1.15: SATA link down (SStatus 0 SControl 10)
ata1.15: qc timeout (cmd 0xe4)
ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
ata1.15: PMP revalidation failed (errno=-5)
ata1.15: failed to recover PMP after 5 tries, giving up
ata1.15: Port Multiplier detaching
ata1.00: disabled
ata1.01: disabled
ata1.02: disabled
ata1.05: disabled
ata1.00: disabled
ata1: hard resetting link
ata1: SATA link down (SStatus 0 SControl 0)
ata1: EH complete
ata1.00: detaching (SCSI 1:0:0:0)
sd 1:0:0:0: [sdb] Synchronizing SCSI cache
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
sd 1:0:0:0: [sdb] Stopping disk
sd 1:0:0:0: [sdb] START_STOP FAILED
sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
ata1.01: detaching (SCSI 1:1:0:0)
sd 1:1:0:0: [sdc] Synchronizing SCSI cache
sd 1:1:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
sd 1:1:0:0: [sdc] Stopping disk
sd 1:1:0:0: [sdc] START_STOP FAILED
sd 1:1:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
ata1.02: detaching (SCSI 1:2:0:0)
sd 1:2:0:0: [sdd] Synchronizing SCSI cache
sd 1:2:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
sd 1:2:0:0: [sdd] Stopping disk
sd 1:2:0:0: [sdd] START_STOP FAILED
sd 1:2:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
ata1.05: detaching (SCSI 1:5:0:0)
sd 1:5:0:0: [sde] Stopping disk
sd 1:5:0:0: [sde] START_STOP FAILED
sd 1:5:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00
ata2.00: failed to read SCR 1 (Emask=0x40)
ata2.01: failed to read SCR 1 (Emask=0x40)
ata2.02: failed to read SCR 1 (Emask=0x40)
ata2.03: failed to read SCR 1 (Emask=0x40)
ata2.04: failed to read SCR 1 (Emask=0x40)
ata2.05: failed to read SCR 1 (Emask=0x40)
ata2.06: failed to read SCR 1 (Emask=0x40)
ata2.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
ata2.15: irq_stat 0x01940090, PHY RDY changed
ata2: SError: { 10B8B }
ata2.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.15: hard resetting link
ata2.15: SATA link down (SStatus 0 SControl 0)
ata2.15: qc timeout (cmd 0xe4)
ata2.15: failed to read PMP GSCR[0] (Emask=0x4)
ata2.15: PMP revalidation failed (errno=-5)
ata2.15: retrying hardreset in 5 secs
ata2.15: hard resetting link
ata2.15: SATA link down (SStatus 0 SControl 0)
ata2.15: qc timeout (cmd 0xe4)
ata2.15: failed to read PMP GSCR[0] (Emask=0x4)
ata2.15: PMP revalidation failed (errno=-5)
ata2.15: limiting SATA link speed to 1.5 Gbps
ata2.15: retrying hardreset in 5 secs
ata1: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
ata1: irq_stat 0x00a40080, device exchanged
ata1: SError: { PHYRdyChg }
ata1: hard resetting link
ata2.15: hard resetting link
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata1.15: Port Multiplier 1.1, 0x1095:0x4726 r31, 7 ports, feat 0x1/0x9
ata1.00: hard resetting link
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.01: hard resetting link
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.02: hard resetting link
ata2.15: SATA link down (SStatus 0 SControl 10)
ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.03: hard resetting link
ata2.15: qc timeout (cmd 0xe4)
ata2.15: failed to read PMP GSCR[0] (Emask=0x4)
ata2.15: PMP revalidation failed (errno=-5)
ata2.15: retrying hardreset in 5 secs
ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.04: hard resetting link
ata1.04: SATA link down (SStatus 0 SControl 320)
ata1.05: hard resetting link
ata1.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
ata1.06: hard resetting link
ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
ata1.00: ATA-7: ST3300831A, 3.03, max UDMA/100
ata1.00: 586072368 sectors, multi 0: LBA48 
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
ata1.01: ATA-7: ST3300831A, 3.03, max UDMA/100
ata1.01: 586072368 sectors, multi 0: LBA48 
ata1.01: applying bridge limits
ata1.01: configured for UDMA/100
ata1.02: ATA-7: ST3300622A, 3.AND, max UDMA/100
ata1.02: 586072368 sectors, multi 0: LBA48 
ata1.02: applying bridge limits
ata1.02: configured for UDMA/100
ata1.03: ATA-7: ST3300622A, 3.AND, max UDMA/100
ata1.03: 586072368 sectors, multi 0: LBA48 
ata1.03: applying bridge limits
ata1.03: configured for UDMA/100
ata1.05: ATA-6: Config  Disk, PLS12061, max UDMA/133
ata1.05: 640 sectors, multi 1: LBA 
ata1.05: device is on DMA blacklist, disabling DMA
ata1.05: configured for PIO4
ata1: EH complete
scsi 1:0:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
sd 1:0:0:0: Attached scsi generic sg2 type 0
scsi 1:1:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
sd 1:1:0:0: [sdc] Write Protect is off
sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
sd 1:1:0:0: [sdc] Write Protect is off
sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 1:1:0:0: [sdc] Attached SCSI disk
sd 1:1:0:0: Attached scsi generic sg3 type 0
scsi 1:2:0:0: Direct-Access     ATA      ST3300622A       3.AN PQ: 0 ANSI: 5
sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 1:2:0:0: [sdd] Write Protect is off
sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
sd 1:2:0:0: [sdd] Write Protect is off
sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1
sd 1:2:0:0: [sdd] Attached SCSI disk
sd 1:2:0:0: Attached scsi generic sg4 type 0
scsi 1:3:0:0: Direct-Access     ATA      ST3300622A       3.AN PQ: 0 ANSI: 5
sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
sd 1:3:0:0: [sde] Write Protect is off
sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
sd 1:3:0:0: [sde] Write Protect is off
sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde: sde1
sd 1:3:0:0: [sde] Attached SCSI disk
sd 1:3:0:0: Attached scsi generic sg5 type 0
scsi 1:5:0:0: Direct-Access     ATA      Config  Disk     PLS1 PQ: 0 ANSI: 5
sd 1:5:0:0: [sdk] 640 512-byte hardware sectors (0 MB)
sd 1:5:0:0: [sdk] Write Protect is off
sd 1:5:0:0: [sdk] Mode Sense: 00 3a 00 00
sd 1:5:0:0: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 1:5:0:0: [sdk] 640 512-byte hardware sectors (0 MB)
sd 1:5:0:0: [sdk] Write Protect is off
sd 1:5:0:0: [sdk] Mode Sense: 00 3a 00 00
sd 1:5:0:0: [sdk] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdk: unknown partition table
sd 1:5:0:0: [sdk] Attached SCSI disk
sd 1:5:0:0: Attached scsi generic sg11 type 0
ata2.15: hard resetting link
ata2.15: SATA link down (SStatus 0 SControl 10)
ata2.15: qc timeout (cmd 0xe4)
ata2.15: failed to read PMP GSCR[0] (Emask=0x4)
ata2.15: PMP revalidation failed (errno=-5)
ata2.15: retrying hardreset in 5 secs
ata2.15: hard resetting link
ata2.15: SATA link down (SStatus 0 SControl 10)
ata2.15: qc timeout (cmd 0xe4)
ata2.15: failed to read PMP GSCR[0] (Emask=0x4)
ata2.15: PMP revalidation failed (errno=-5)
ata2.15: failed to recover PMP after 5 tries, giving up
ata2.15: Port Multiplier detaching
ata2.00: disabled
ata2.01: disabled
ata2.02: disabled
ata2.03: disabled
ata2.05: disabled
ata2.00: disabled
ata2: hard resetting link
ata2: SATA link down (SStatus 0 SControl 0)
ata2: EH complete
ata2.00: detaching (SCSI 2:0:0:0)
sd 2:0:0:0: [sdf] Synchronizing SCSI cache
sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
sd 2:0:0:0: [sdf] Stopping disk
sd 2:0:0:0: [sdf] START_STOP FAILED
sd 2:0:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
ata2.01: detaching (SCSI 2:1:0:0)
sd 2:1:0:0: [sdg] Synchronizing SCSI cache
sd 2:1:0:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00
sd 2:1:0:0: [sdg] Stopping disk
sd 2:1:0:0: [sdg] START_STOP FAILED
sd 2:1:0:0: [sdg] Result: hostbyte=0x04 driverbyte=0x00
ata2.02: detaching (SCSI 2:2:0:0)
sd 2:2:0:0: [sdh] Synchronizing SCSI cache
sd 2:2:0:0: [sdh] Result: hostbyte=0x04 driverbyte=0x00
sd 2:2:0:0: [sdh] Stopping disk
sd 2:2:0:0: [sdh] START_STOP FAILED
sd 2:2:0:0: [sdh] Result: hostbyte=0x04 driverbyte=0x00
ata2.03: detaching (SCSI 2:3:0:0)
sd 2:3:0:0: [sdi] Synchronizing SCSI cache
sd 2:3:0:0: [sdi] Result: hostbyte=0x04 driverbyte=0x00
sd 2:3:0:0: [sdi] Stopping disk
sd 2:3:0:0: [sdi] START_STOP FAILED
sd 2:3:0:0: [sdi] Result: hostbyte=0x04 driverbyte=0x00
ata2.05: detaching (SCSI 2:5:0:0)
sd 2:5:0:0: [sdj] Stopping disk
sd 2:5:0:0: [sdj] START_STOP FAILED
sd 2:5:0:0: [sdj] Result: hostbyte=0x04 driverbyte=0x00