[ 0.000000] Linux version 2.6.24-rc7 (root@BigMouth) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #2 Thu Jan 10 12:53:51 EST 2008 [ 0.000000] Command line: root=/dev/sda3 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff30000 (usable) [ 0.000000] BIOS-e820: 000000007ff30000 - 000000007ff40000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff40000 - 000000007fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 524080) 1 entries of 256 used [ 0.000000] end_pfn_map = 1048576 [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FA850, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 7FF30000, 0030 (r1 A M I OEMRSDT 6000517 MSFT 97) [ 0.000000] ACPI: FACP 7FF30200, 0081 (r1 A M I OEMFACP 6000517 MSFT 97) [ 0.000000] ACPI: DSDT 7FF303F0, 38EA (r1 SK8V_ SK8V_033 33 MSFT 100000D) [ 0.000000] ACPI: FACS 7FF40000, 0040 [ 0.000000] ACPI: APIC 7FF30390, 0052 (r1 A M I OEMAPIC 6000517 MSFT 97) [ 0.000000] ACPI: OEMB 7FF40040, 003F (r1 A M I OEMBIOS 6000517 MSFT 97) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used [ 0.000000] Entering add_active_range(0, 256, 524080) 1 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 524080 [ 0.000000] On node 0 totalpages: 523983 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 964 pages reserved [ 0.000000] DMA zone: 2979 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7109 pages used for memmap [ 0.000000] DMA32 zone: 512875 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ff80000) [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515854 [ 0.000000] Kernel command line: root=/dev/sda3 [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 40.969694] time.c: Detected 1802.299 MHz processor. [ 40.972096] Console: colour VGA+ 80x25 [ 40.972100] console [tty0] enabled [ 40.976164] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 40.978256] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 40.978631] Checking aperture... [ 40.978685] CPU 0: aperture @ f8000000 size 64 MB [ 40.998433] Memory: 2059876k/2096320k available (2288k kernel code, 35684k reserved, 1034k data, 192k init) [ 41.075660] Calibrating delay using timer specific routine.. 3608.83 BogoMIPS (lpj=7217669) [ 41.075816] Mount-cache hash table entries: 256 [ 41.075979] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 41.076037] CPU: L2 Cache: 1024K (64 bytes/line) [ 41.076101] CPU: AMD Opteron(tm) Processor 144 stepping 0a [ 41.076245] ACPI: Core revision 20070126 [ 41.118998] Using local APIC timer interrupts. [ 41.174522] APIC timer calibration result 12515970 [ 41.174524] Detected 12.515 MHz APIC timer. [ 41.174709] net_namespace: 120 bytes [ 41.175136] NET: Registered protocol family 16 [ 41.175327] ACPI: bus type pci registered [ 41.175387] PCI: Using configuration type 1 [ 41.177528] ACPI: EC: Look up EC in DSDT [ 41.181044] ACPI: Interpreter enabled [ 41.181097] ACPI: (supports S0 S1 S3 S5) [ 41.181310] ACPI: Using IOAPIC for interrupt routing [ 41.188091] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 41.188829] PCI: enabled onboard AC97/MC97 devices [ 41.189130] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 41.195690] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15) [ 41.196214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15) [ 41.196734] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15) [ 41.197255] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15) [ 41.197776] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 41.198382] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 41.199003] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 41.199610] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. [ 41.200213] Linux Plug and Play Support v0.97 (c) Adam Belay [ 41.200290] pnp: PnP ACPI init [ 41.200347] ACPI: bus type pnp registered [ 41.203725] pnp: PnP ACPI: found 14 devices [ 41.203778] ACPI: ACPI bus type pnp unregistered [ 41.203979] SCSI subsystem initialized [ 41.204120] PCI: Using ACPI for IRQ routing [ 41.204175] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 41.204249] PCI: Cannot allocate resource region 0 of device 0000:00:00.0 [ 41.214633] agpgart: Detected AGP bridge 0 [ 41.218144] agpgart: AGP aperture is 64M @ 0xf8000000 [ 41.218581] Time: tsc clocksource has been installed. [ 41.226616] system 00:09: ioport range 0x295-0x296 has been reserved [ 41.226674] system 00:09: ioport range 0x3e1-0x3e7 has been reserved [ 41.226731] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 41.226789] system 00:09: ioport range 0x800-0x87f has been reserved [ 41.226846] system 00:09: ioport range 0x400-0x41f has been reserved [ 41.226908] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 41.226966] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [ 41.227034] system 00:0a: iomem range 0xfff80000-0xffffffff could not be reserved [ 41.227107] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 41.227165] system 00:0d: iomem range 0xc0000-0xdffff has been reserved [ 41.227222] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 41.227280] system 00:0d: iomem range 0x100000-0x7ffeffff could not be reserved [ 41.227348] system 00:0d: iomem range 0x0-0x0 could not be reserved [ 41.227743] PCI: Bridge: 0000:00:01.0 [ 41.227796] IO window: a000-afff [ 41.227850] MEM window: fc500000-fcafffff [ 41.227905] PREFETCH window: b3e00000-f3dfffff [ 41.227977] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 41.228001] NET: Registered protocol family 2 [ 41.262623] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 41.263229] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 41.265781] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 41.266183] TCP: Hash tables configured (established 262144 bind 65536) [ 41.266240] TCP reno registered [ 41.275236] audit: initializing netlink socket (disabled) [ 41.275299] audit(1200010171.256:1): initialized [ 41.275619] io scheduler noop registered [ 41.275672] io scheduler anticipatory registered (default) [ 41.275728] io scheduler deadline registered [ 41.275788] io scheduler cfq registered [ 41.275846] PCI: VIA PCI bridge detected. Disabling DAC. [ 41.276369] Boot video device is 0000:01:00.0 [ 41.278423] Real Time Clock Driver v1.12ac [ 41.278538] Linux agpgart interface v0.102 [ 41.278601] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 41.278762] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 41.278907] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 41.279557] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize [ 41.279859] loop: module loaded [ 41.279916] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 41.279973] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 41.280077] VIA8237SATA: IDE controller (0x1106:0x3149 rev 0x80) at PCI slot 0000:00:0f.0 [ 41.280160] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20 [ 41.280277] VIA8237SATA: 100% native mode on irq 20 [ 41.280335] ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio [ 41.280484] ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:pio, hdh:pio [ 41.280631] Probing IDE interface ide2... [ 41.846391] Probing IDE interface ide3... [ 42.414221] VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:0f.1 [ 42.414300] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20 [ 42.414408] VP_IDE: not 100% native mode: will probe irqs later [ 42.414470] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 [ 42.414540] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA [ 42.414689] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA [ 42.414835] Probing IDE interface ide0... [ 42.830192] hdb: Maxtor 4G160J8, ATA DISK drive [ 43.166089] hda: ST3200822A, ATA DISK drive [ 43.166186] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 43.166420] hda: UDMA/100 mode selected [ 43.166765] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 43.166873] hdb: UDMA/133 mode selected [ 43.167065] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 43.167217] Probing IDE interface ide1... [ 44.085810] hdd: ASUS DVD-E616P2, ATAPI CD/DVD-ROM drive [ 44.869573] hdc: ASUS DRW-0402P/D, ATAPI CD/DVD-ROM drive [ 44.869745] hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 44.869812] hdc: UDMA/33 mode selected [ 44.869958] hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4 [ 44.870173] hdd: drive side 80-wire cable detection failed, limiting max speed to UDMA33 [ 44.870241] hdd: UDMA/33 mode selected [ 44.870547] ide1 at 0x170-0x177,0x376 on irq 15 [ 44.870782] Probing IDE interface ide2... [ 45.437300] Probing IDE interface ide3... [ 46.005149] hda: max request size: 512KiB [ 46.005765] hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63 [ 46.006048] hda: cache flushes supported [ 46.006124] hda: hda1 hda2 [ 46.014366] hdb: max request size: 512KiB [ 46.021424] hdb: 320173056 sectors (163928 MB) w/2048KiB Cache, CHS=19929/255/63 [ 46.021567] hdb: cache flushes not supported [ 46.021636] hdb: hdb1 [ 46.039769] hdc: ATAPI 47X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache [ 46.040052] Uniform CD-ROM driver Revision: 3.20 [ 47.333079] hdd: ATAPI 48X DVD-ROM drive, 512kB Cache [ 47.344447] ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 18 (level, low) -> IRQ 18 [ 52.555145] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0 [ 52.555148] [ 52.555149] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs [ 52.555151] [ 52.559077] scsi 0:0:0:0: Direct-Access SEAGATE ST318452LW 0004 PQ: 0 ANSI: 3 [ 52.559151] scsi0:A:0:0: Tagged Queuing enabled. Depth 32 [ 52.559250] target0:0:0: Beginning Domain Validation [ 52.567382] target0:0:0: wide asynchronous [ 52.573563] target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 63) [ 52.584331] target0:0:0: Ending Domain Validation [ 53.106892] scsi 0:0:3:0: CD-ROM YAMAHA CRW8824S 1.00 PQ: 0 ANSI: 2 [ 53.106967] target0:0:3: Beginning Domain Validation [ 53.121395] target0:0:3: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15) [ 53.129117] target0:0:3: Domain Validation skipping write tests [ 53.129172] target0:0:3: Ending Domain Validation [ 55.949167] Driver 'sd' needs updating - please use bus_type methods [ 55.950059] sd 0:0:0:0: [sda] 35843670 512-byte hardware sectors (18352 MB) [ 55.951240] sd 0:0:0:0: [sda] Write Protect is off [ 55.951295] sd 0:0:0:0: [sda] Mode Sense: a3 00 10 08 [ 55.952978] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 55.953844] sd 0:0:0:0: [sda] 35843670 512-byte hardware sectors (18352 MB) [ 55.955026] sd 0:0:0:0: [sda] Write Protect is off [ 55.955080] sd 0:0:0:0: [sda] Mode Sense: a3 00 10 08 [ 55.956788] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 55.956857] sda: sda1 sda2 sda3 [ 55.964432] sd 0:0:0:0: [sda] Attached SCSI disk [ 55.964494] Driver 'sr' needs updating - please use bus_type methods [ 55.998683] sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray [ 55.998783] sr 0:0:3:0: Attached scsi CD-ROM sr0 [ 55.998850] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 55.999269] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 55.999325] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 55.999488] mice: PS/2 mouse device common for all mice [ 56.029540] input: AT Translated Set 2 keyboard as /class/input/input0 [ 56.057155] TCP cubic registered [ 56.057213] NET: Registered protocol family 1 [ 56.057277] NET: Registered protocol family 17 [ 56.057364] NET: Registered protocol family 33 [ 56.057557] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 56.453038] input: ImPS/2 Generic Wheel Mouse as /class/input/input1 [ 56.581620] ReiserFS: sda3: found reiserfs format "3.6" with standard journal [ 56.581683] ReiserFS: sda3: using ordered data mode [ 56.584649] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 56.586266] ReiserFS: sda3: checking transaction log (sda3) [ 56.612710] ReiserFS: sda3: Using r5 hash to sort names [ 56.612791] VFS: Mounted root (reiserfs filesystem) readonly. [ 56.612861] Freeing unused kernel memory: 192k freed [ 58.830733] libata version 3.00 loaded. [ 58.834566] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 58.834589] sr 0:0:3:0: Attached scsi generic sg1 type 5 [ 58.835842] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 58.917293] usbcore: registered new interface driver usbfs [ 58.917324] usbcore: registered new interface driver hub [ 58.936252] usbcore: registered new device driver usb [ 58.937137] USB Universal Host Controller Interface driver v3.0 [ 59.068441] input: Power Button (FF) as /class/input/input2 [ 59.113197] ACPI: Power Button (FF) [PWRF] [ 59.113284] input: Power Button (CM) as /class/input/input3 [ 59.115827] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[fd400000-fd4007ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 59.143952] ACPI: Power Button (CM) [PWRB] [ 59.144030] input: Sleep Button (CM) as /class/input/input4 [ 59.159999] sata_sil24 0000:00:0c.0: version 1.1 [ 59.160021] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 59.160374] PCI: Disallowing DAC for device 0000:00:0c.0 [ 59.169193] ACPI: Sleep Button (CM) [SLPB] [ 59.174774] scsi1 : sata_sil24 [ 59.191103] scsi2 : sata_sil24 [ 59.205468] scsi3 : sata_sil24 [ 59.231501] scsi4 : sata_sil24 [ 59.231570] ata1: SATA max UDMA/100 host m128@0xfd900000 port 0xfd800000 irq 17 [ 59.231574] ata2: SATA max UDMA/100 host m128@0xfd900000 port 0xfd802000 irq 17 [ 59.231578] ata3: SATA max UDMA/100 host m128@0xfd900000 port 0xfd804000 irq 17 [ 59.231581] ata4: SATA max UDMA/100 host m128@0xfd900000 port 0xfd806000 irq 17 [ 59.880531] input: PC Speaker as /class/input/input5 [ 60.027104] Floppy drive(s): fd0 is 1.44M [ 60.044905] FDC 0 is a post-1991 82077 [ 60.047130] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 60.047248] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 60.428849] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e018000059341e] [ 61.428460] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 61.428605] ata1.15: Port Multiplier 1.1, 0x1095:0x4726 r31, 7 ports, feat 0x1/0x9 [ 61.428797] ata1.00: hard resetting link [ 61.748518] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 61.748524] ata1.01: hard resetting link [ 62.068415] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 62.068418] ata1.02: hard resetting link [ 62.388321] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 62.388323] ata1.03: hard resetting link [ 62.708223] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 62.708226] ata1.04: hard resetting link [ 63.028129] ata1.04: SATA link down (SStatus 0 SControl 320) [ 63.028136] ata1.05: hard resetting link [ 63.348026] ata1.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0) [ 63.348029] ata1.06: hard resetting link [ 63.667932] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 63.668978] ata1.00: ATA-7: ST3300831A, 3.03, max UDMA/100 [ 63.668981] ata1.00: 586072368 sectors, multi 16: LBA48 [ 63.668983] ata1.00: applying bridge limits [ 63.670120] ata1.00: configured for UDMA/100 [ 63.671146] ata1.01: ATA-7: ST3300831A, 3.03, max UDMA/100 [ 63.671149] ata1.01: 586072368 sectors, multi 0: LBA48 [ 63.671151] ata1.01: applying bridge limits [ 63.672287] ata1.01: configured for UDMA/100 [ 63.716356] ata1.02: ATA-7: ST3300622A, 3.AND, max UDMA/100 [ 63.716358] ata1.02: 586072368 sectors, multi 0: LBA48 [ 63.716360] ata1.02: applying bridge limits [ 63.782803] ata1.02: configured for UDMA/100 [ 63.826318] ata1.03: ATA-7: ST3300622A, 3.AND, max UDMA/100 [ 63.826321] ata1.03: 586072368 sectors, multi 0: LBA48 [ 63.826323] ata1.03: applying bridge limits [ 63.884593] ata1.03: configured for UDMA/100 [ 63.884662] ata1.05: ATA-6: Config Disk, PLS12061, max UDMA/133 [ 63.884665] ata1.05: 640 sectors, multi 1: LBA [ 63.884671] ata1.05: device is on DMA blacklist, disabling DMA [ 63.884759] ata1.05: configured for PIO4 [ 63.884799] ata1: EH complete [ 65.963083] ata2: SATA link down (SStatus 0 SControl 0) [ 68.042452] ata3: SATA link down (SStatus 0 SControl 0) [ 70.121822] ata4: SATA link down (SStatus 0 SControl 0) [ 70.121936] scsi 1:0:0:0: Direct-Access ATA ST3300831A 3.03 PQ: 0 ANSI: 5 [ 70.122351] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 70.122362] sd 1:0:0:0: [sdb] Write Protect is off [ 70.122365] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 70.122377] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.122423] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 70.122430] sd 1:0:0:0: [sdb] Write Protect is off [ 70.122432] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 70.122443] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.122448] sdb: sdb1 [ 70.125719] sd 1:0:0:0: [sdb] Attached SCSI disk [ 70.125755] sd 1:0:0:0: Attached scsi generic sg2 type 0 [ 70.126207] scsi 1:1:0:0: Direct-Access ATA ST3300831A 3.03 PQ: 0 ANSI: 5 [ 70.126477] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 70.126485] sd 1:1:0:0: [sdc] Write Protect is off [ 70.126487] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 70.126499] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.126528] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 70.126535] sd 1:1:0:0: [sdc] Write Protect is off [ 70.126538] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 70.126549] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.126551] sdc: sdc1 [ 70.139869] sd 1:1:0:0: [sdc] Attached SCSI disk [ 70.139900] sd 1:1:0:0: Attached scsi generic sg3 type 0 [ 70.140370] scsi 1:2:0:0: Direct-Access ATA ST3300622A 3.AN PQ: 0 ANSI: 5 [ 70.140431] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 70.140439] sd 1:2:0:0: [sdd] Write Protect is off [ 70.140441] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 70.140452] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.140482] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 70.140489] sd 1:2:0:0: [sdd] Write Protect is off [ 70.140491] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 70.140502] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.140504] sdd: sdd1 [ 70.159621] sd 1:2:0:0: [sdd] Attached SCSI disk [ 70.159653] sd 1:2:0:0: Attached scsi generic sg4 type 0 [ 70.159699] scsi 1:3:0:0: Direct-Access ATA ST3300622A 3.AN PQ: 0 ANSI: 5 [ 70.159756] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB) [ 70.159764] sd 1:3:0:0: [sde] Write Protect is off [ 70.159766] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00 [ 70.159777] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.160524] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB) [ 70.160532] sd 1:3:0:0: [sde] Write Protect is off [ 70.160534] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00 [ 70.160545] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 70.160548] sde: sde1 [ 70.176524] sd 1:3:0:0: [sde] Attached SCSI disk [ 70.176556] sd 1:3:0:0: Attached scsi generic sg5 type 0 [ 70.176602] scsi 1:5:0:0: Direct-Access ATA Config Disk PLS1 PQ: 0 ANSI: 5 [ 70.176661] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 70.176668] sd 1:5:0:0: [sdf] Write Protect is off [ 70.176670] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 70.176681] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 70.176710] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 70.176717] sd 1:5:0:0: [sdf] Write Protect is off [ 70.176719] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 70.176731] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 70.176733] sdf: unknown partition table [ 70.177579] sd 1:5:0:0: [sdf] Attached SCSI disk [ 70.177611] sd 1:5:0:0: Attached scsi generic sg6 type 0 [ 70.177788] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 70.177802] uhci_hcd 0000:00:10.0: UHCI Host Controller [ 70.177992] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 70.178021] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b800 [ 70.178162] usb usb1: configuration #1 chosen from 1 choice [ 70.178188] hub 1-0:1.0: USB hub found [ 70.178196] hub 1-0:1.0: 2 ports detected [ 70.281899] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21 [ 70.281913] uhci_hcd 0000:00:10.1: UHCI Host Controller [ 70.281938] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 [ 70.281961] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c000 [ 70.282085] usb usb2: configuration #1 chosen from 1 choice [ 70.282111] hub 2-0:1.0: USB hub found [ 70.282119] hub 2-0:1.0: 2 ports detected [ 70.385877] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21 [ 70.385890] uhci_hcd 0000:00:10.2: UHCI Host Controller [ 70.385918] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 [ 70.385941] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400 [ 70.386059] usb usb3: configuration #1 chosen from 1 choice [ 70.386084] hub 3-0:1.0: USB hub found [ 70.386091] hub 3-0:1.0: 2 ports detected [ 70.489843] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21 [ 70.489857] uhci_hcd 0000:00:10.3: UHCI Host Controller [ 70.489882] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 [ 70.489905] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800 [ 70.490022] usb usb4: configuration #1 chosen from 1 choice [ 70.490047] hub 4-0:1.0: USB hub found [ 70.490055] hub 4-0:1.0: 2 ports detected [ 70.593880] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21 [ 70.594063] ehci_hcd 0000:00:10.4: EHCI Host Controller [ 70.594122] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 [ 70.594171] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000 [ 70.605694] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 70.605812] usb usb5: configuration #1 chosen from 1 choice [ 70.605838] hub 5-0:1.0: USB hub found [ 70.605847] hub 5-0:1.0: 8 ports detected [ 70.709842] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 70.712088] Audigy2 value: Special config. [ 72.299598] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 [ 72.299603] Copyright (c) 1999-2006 Intel Corporation. [ 72.299645] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 72.299650] PCI: Disallowing DAC for device 0000:00:0e.0 [ 72.558679] e1000: 0000:00:0e.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:62:c5:46 [ 72.734178] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 72.890022] ReiserFS: hdb1: found reiserfs format "3.6" with standard journal [ 72.890034] ReiserFS: hdb1: using ordered data mode [ 72.929121] ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 72.930477] ReiserFS: hdb1: checking transaction log (hdb1) [ 73.047880] ReiserFS: hdb1: Using r5 hash to sort names [ 73.096394] ReiserFS: hda2: found reiserfs format "3.6" with standard journal [ 73.096405] ReiserFS: hda2: using ordered data mode [ 73.101224] ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 73.102630] ReiserFS: hda2: checking transaction log (hda2) [ 73.165531] ReiserFS: hda2: Using r5 hash to sort names [ 79.014996] hda: UDMA/100 mode selected [ 79.018892] hdb: UDMA/133 mode selected [ 79.073585] hdc: UDMA/33 mode selected [ 79.091357] hdd: UDMA/33 mode selected [ 81.606735] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 85.836882] w83627hf: Found W83697HF chip at 0x290