8 512-byte hardware sectors (300069 MB) [ 449.927450] sd 1:1:0:0: [sdc] Write Protect is off [ 449.927453] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 449.927464] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 449.927477] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 449.927484] sd 1:2:0:0: [sdd] Write Protect is off [ 449.927487] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 449.927498] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 449.927511] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 449.927518] sd 1:5:0:0: [sdf] Write Protect is off [ 449.927521] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 449.927532] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 449.927538] ata1.03: detaching (SCSI 1:3:0:0) [ 449.927717] sd 1:3:0:0: [sde] Synchronizing SCSI cache [ 449.928940] sd 1:3:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00 [ 449.928945] sd 1:3:0:0: [sde] Stopping disk [ 449.928950] sd 1:3:0:0: [sde] START_STOP FAILED [ 449.928953] sd 1:3:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00 [ 617.297502] ata1.15: limiting speed to UDMA7:PIO5 [ 617.297509] ata1.00: failed to read SCR 1 (Emask=0x40) [ 617.297512] ata1.01: failed to read SCR 1 (Emask=0x40) [ 617.297515] ata1.02: failed to read SCR 1 (Emask=0x40) [ 617.297518] ata1.03: failed to read SCR 1 (Emask=0x40) [ 617.297521] ata1.04: failed to read SCR 1 (Emask=0x40) [ 617.297524] ata1.05: failed to read SCR 1 (Emask=0x40) [ 617.297527] ata1.06: failed to read SCR 1 (Emask=0x40) [ 617.297531] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen [ 617.297535] ata1.15: irq_stat 0x01940090, PHY RDY changed [ 617.297539] ata1: SError: { 10B8B } [ 617.297543] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 617.297549] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 617.297554] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 617.297559] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 617.297564] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 617.297569] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 617.297574] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 617.297582] ata1.15: hard resetting link [ 622.390270] ata1.15: SATA link down (SStatus 1 SControl 10) [ 622.642187] ata1.15: qc timeout (cmd 0xe4) [ 622.642196] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 622.642199] ata1.15: PMP revalidation failed (errno=-5) [ 622.642202] ata1.15: retrying hardreset in 5 secs [ 627.644669] ata1.15: hard resetting link [ 632.739129] ata1.15: SATA link down (SStatus 1 SControl 10) [ 632.991047] ata1.15: qc timeout (cmd 0xe4) [ 632.991055] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 632.991058] ata1.15: PMP revalidation failed (errno=-5) [ 632.991061] ata1.15: retrying hardreset in 5 secs [ 637.993529] ata1.15: hard resetting link [ 640.192871] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 640.193076] ata1.00: hard resetting link [ 640.512952] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 640.512956] ata1.01: hard resetting link [ 640.832853] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 640.832857] ata1.02: hard resetting link [ 641.152758] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 641.152762] ata1.03: hard resetting link [ 641.472660] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 641.472664] ata1.04: hard resetting link [ 641.792562] ata1.04: SATA link down (SStatus 0 SControl 310) [ 641.792565] ata1.05: hard resetting link [ 642.112464] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0) [ 642.112468] ata1.06: hard resetting link [ 642.432369] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 642.434609] ata1.00: configured for UDMA/100 [ 642.436783] ata1.01: configured for UDMA/100 [ 642.548979] ata1.02: configured for UDMA/100 [ 642.597737] ata1.03: ATA-7: ST3300622A, 3.AND, max UDMA/100 [ 642.597741] ata1.03: 586072368 sectors, multi 0: LBA48 [ 642.597744] ata1.03: applying bridge limits [ 642.656013] ata1.03: configured for UDMA/100 [ 642.656121] ata1.05: device is on DMA blacklist, disabling DMA [ 642.656227] ata1.05: configured for PIO4 [ 642.656497] ata1: EH complete [ 642.656522] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 642.656534] sd 1:0:0:0: [sdb] Write Protect is off [ 642.656537] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 642.656550] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 642.656564] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 642.656572] sd 1:1:0:0: [sdc] Write Protect is off [ 642.656575] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 642.656586] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 642.656600] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 642.656608] sd 1:2:0:0: [sdd] Write Protect is off [ 642.656610] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 642.656622] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 642.656635] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 642.656643] sd 1:5:0:0: [sdf] Write Protect is off [ 642.656646] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 642.656657] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 642.656670] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 642.656677] sd 1:0:0:0: [sdb] Write Protect is off [ 642.656680] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 642.656692] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 642.656704] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 642.656712] sd 1:1:0:0: [sdc] Write Protect is off [ 642.656715] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 642.656726] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 642.656738] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 642.656746] sd 1:2:0:0: [sdd] Write Protect is off [ 642.656749] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 642.656760] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 642.656773] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 642.656780] sd 1:5:0:0: [sdf] Write Protect is off [ 642.656783] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 642.656794] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 642.656866] scsi 1:3:0:0: Direct-Access ATA ST3300622A 3.AN PQ: 0 ANSI: 5 [ 642.657321] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB) [ 642.657330] sd 1:3:0:0: [sde] Write Protect is off [ 642.657333] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00 [ 642.657345] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 642.657389] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB) [ 642.657796] sd 1:3:0:0: [sde] Write Protect is off [ 642.657799] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00 [ 642.657815] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 642.657819] sde: sde1 [ 642.695754] sd 1:3:0:0: [sde] Attached SCSI disk [ 642.695803] sd 1:3:0:0: Attached scsi generic sg5 type 0 [ 810.992367] ata1.00: failed to read SCR 1 (Emask=0x40) [ 810.992373] ata1.01: failed to read SCR 1 (Emask=0x40) [ 810.992376] ata1.02: failed to read SCR 1 (Emask=0x40) [ 810.992379] ata1.03: failed to read SCR 1 (Emask=0x40) [ 810.992382] ata1.04: failed to read SCR 1 (Emask=0x40) [ 810.992385] ata1.05: failed to read SCR 1 (Emask=0x40) [ 810.992388] ata1.06: failed to read SCR 1 (Emask=0x40) [ 810.992393] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen [ 810.992396] ata1.15: irq_stat 0x01140010, PHY RDY changed [ 810.992400] ata1: SError: { 10B8B } [ 810.992405] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 810.992410] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 810.992415] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 810.992421] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 810.992426] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 810.992431] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 810.992436] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 810.992444] ata1.15: hard resetting link [ 816.083507] ata1.15: SATA link down (SStatus 1 SControl 10) [ 816.335424] ata1.15: qc timeout (cmd 0xe4) [ 816.335432] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 816.335435] ata1.15: PMP revalidation failed (errno=-5) [ 816.335438] ata1.15: retrying hardreset in 5 secs [ 821.337906] ata1.15: hard resetting link [ 826.432365] ata1.15: SATA link down (SStatus 1 SControl 10) [ 826.684283] ata1.15: qc timeout (cmd 0xe4) [ 826.684290] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 826.684293] ata1.15: PMP revalidation failed (errno=-5) [ 826.684297] ata1.15: retrying hardreset in 5 secs [ 831.686765] ata1.15: hard resetting link [ 833.886108] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 833.886312] ata1.00: hard resetting link [ 834.206188] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 834.206192] ata1.01: hard resetting link [ 834.526091] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 834.526095] ata1.02: hard resetting link [ 834.845993] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 834.845997] ata1.03: hard resetting link [ 835.165897] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 835.165901] ata1.04: hard resetting link [ 835.485800] ata1.04: SATA link down (SStatus 0 SControl 310) [ 835.485804] ata1.05: hard resetting link [ 835.805701] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0) [ 835.805704] ata1.06: hard resetting link [ 836.125608] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 836.125738] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x11) [ 836.125742] ata1.00: revalidation failed (errno=-5) [ 836.125871] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x11) [ 836.125875] ata1.01: revalidation failed (errno=-5) [ 836.126004] ata1.02: failed to IDENTIFY (I/O error, err_mask=0x11) [ 836.126007] ata1.02: revalidation failed (errno=-5) [ 836.126136] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 836.126140] ata1.03: revalidation failed (errno=-5) [ 836.126277] ata1.05: device is on DMA blacklist, disabling DMA [ 836.126394] ata1.05: configured for PIO4 [ 836.126397] ata1: failed to recover some devices, retrying in 5 secs [ 841.127902] ata1.00: hard resetting link [ 841.447991] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 841.447995] ata1.01: hard resetting link [ 841.767894] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 841.767898] ata1.02: hard resetting link [ 842.087796] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 842.087800] ata1.03: hard resetting link [ 842.407699] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 842.409866] ata1.00: configured for UDMA/100 [ 842.412082] ata1.01: configured for UDMA/100 [ 842.516615] ata1.02: configured for UDMA/100 [ 842.516722] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 842.516726] ata1.03: revalidation failed (errno=-5) [ 842.516729] ata1: failed to recover some devices, retrying in 5 secs [ 847.517963] ata1.03: hard resetting link [ 847.838051] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 847.838156] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 847.838160] ata1.03: revalidation failed (errno=-5) [ 847.838163] ata1.03: disabled [ 848.341712] ata1.03: hard resetting link [ 848.661801] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 848.661856] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 848.661859] ata1: failed to recover some devices, retrying in 5 secs [ 853.664098] ata1.03: hard resetting link [ 853.984187] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 853.984243] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 853.984246] ata1: failed to recover some devices, retrying in 5 secs [ 858.986483] ata1.03: hard resetting link [ 859.306572] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 859.306628] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 859.306631] ata1: failed to recover some devices, retrying in 5 secs [ 864.308868] ata1.03: hard resetting link [ 864.628957] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 864.629240] ata1: EH complete [ 864.629267] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 864.629278] sd 1:0:0:0: [sdb] Write Protect is off [ 864.629282] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 864.629294] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 864.629309] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 864.629317] sd 1:1:0:0: [sdc] Write Protect is off [ 864.629320] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 864.629331] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 864.629345] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 864.629352] sd 1:2:0:0: [sdd] Write Protect is off [ 864.629355] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 864.629367] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 864.629380] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 864.629387] sd 1:5:0:0: [sdf] Write Protect is off [ 864.629390] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 864.629401] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 864.629414] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 864.629422] sd 1:0:0:0: [sdb] Write Protect is off [ 864.629425] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 864.629436] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 864.629448] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 864.629456] sd 1:1:0:0: [sdc] Write Protect is off [ 864.629458] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 864.629470] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 864.629482] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 864.629489] sd 1:2:0:0: [sdd] Write Protect is off [ 864.629492] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 864.629503] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 864.629516] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 864.629523] sd 1:5:0:0: [sdf] Write Protect is off [ 864.629526] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 864.629537] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 864.629542] ata1.03: detaching (SCSI 1:3:0:0) [ 864.629721] sd 1:3:0:0: [sde] Synchronizing SCSI cache [ 864.630109] sd 1:3:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00 [ 864.630113] sd 1:3:0:0: [sde] Stopping disk [ 864.630119] sd 1:3:0:0: [sde] START_STOP FAILED [ 864.630121] sd 1:3:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00 [ 1232.464873] ata1.00: failed to read SCR 1 (Emask=0x40) [ 1232.464879] ata1.01: failed to read SCR 1 (Emask=0x40) [ 1232.464882] ata1.02: failed to read SCR 1 (Emask=0x40) [ 1232.464885] ata1.03: failed to read SCR 1 (Emask=0x40) [ 1232.464888] ata1.04: failed to read SCR 1 (Emask=0x40) [ 1232.464891] ata1.05: failed to read SCR 1 (Emask=0x40) [ 1232.464894] ata1.06: failed to read SCR 1 (Emask=0x40) [ 1232.464899] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen [ 1232.464902] ata1.15: irq_stat 0x01140010, PHY RDY changed [ 1232.464906] ata1: SError: { 10B8B } [ 1232.464911] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1232.464916] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1232.464921] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1232.464926] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1232.464931] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1232.464936] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1232.464942] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1232.464949] ata1.15: hard resetting link [ 1237.555650] ata1.15: SATA link down (SStatus 1 SControl 10) [ 1237.807567] ata1.15: qc timeout (cmd 0xe4) [ 1237.807575] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 1237.807579] ata1.15: PMP revalidation failed (errno=-5) [ 1237.807582] ata1.15: retrying hardreset in 5 secs [ 1242.810049] ata1.15: hard resetting link [ 1247.904509] ata1.15: SATA link down (SStatus 1 SControl 10) [ 1248.156427] ata1.15: qc timeout (cmd 0xe4) [ 1248.156435] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 1248.156438] ata1.15: PMP revalidation failed (errno=-5) [ 1248.156441] ata1.15: retrying hardreset in 5 secs [ 1253.158910] ata1.15: hard resetting link [ 1255.358253] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 1255.358461] ata1.00: hard resetting link [ 1255.678334] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1255.678338] ata1.01: hard resetting link [ 1255.998235] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1255.998239] ata1.02: hard resetting link [ 1256.318139] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1256.318143] ata1.03: hard resetting link [ 1256.638042] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1256.638046] ata1.04: hard resetting link [ 1256.957945] ata1.04: SATA link down (SStatus 0 SControl 310) [ 1256.957948] ata1.05: hard resetting link [ 1257.277845] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0) [ 1257.277849] ata1.06: hard resetting link [ 1257.597748] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1257.597864] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1257.597868] ata1.00: revalidation failed (errno=-5) [ 1257.597997] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1257.598001] ata1.01: revalidation failed (errno=-5) [ 1257.598129] ata1.02: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1257.598132] ata1.02: revalidation failed (errno=-5) [ 1257.618319] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1257.618471] ata1.05: device is on DMA blacklist, disabling DMA [ 1257.618624] ata1.05: configured for PIO4 [ 1257.618627] ata1: failed to recover some devices, retrying in 5 secs [ 1262.620040] ata1.00: hard resetting link [ 1262.940128] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1262.940132] ata1.01: hard resetting link [ 1263.260032] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1263.260036] ata1.02: hard resetting link [ 1263.579935] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1263.579939] ata1.03: hard resetting link [ 1263.899837] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1263.902118] ata1.00: configured for UDMA/100 [ 1263.904377] ata1.01: configured for UDMA/100 [ 1264.006169] ata1.02: configured for UDMA/100 [ 1264.006262] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1264.006266] ata1: failed to recover some devices, retrying in 5 secs [ 1269.006103] ata1.03: hard resetting link [ 1269.326192] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1269.326294] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1269.326298] ata1: failed to recover some devices, retrying in 5 secs [ 1274.328494] ata1.03: hard resetting link [ 1274.648577] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1274.648860] ata1: EH complete [ 1274.648888] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 1274.648900] sd 1:0:0:0: [sdb] Write Protect is off [ 1274.648904] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1274.648917] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1274.648933] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 1274.648941] sd 1:1:0:0: [sdc] Write Protect is off [ 1274.648944] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1274.648955] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1274.648969] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 1274.648976] sd 1:2:0:0: [sdd] Write Protect is off [ 1274.648979] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1274.648991] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1274.649004] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 1274.649012] sd 1:5:0:0: [sdf] Write Protect is off [ 1274.649014] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1274.649026] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1274.649039] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 1274.649047] sd 1:0:0:0: [sdb] Write Protect is off [ 1274.649049] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1274.649061] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1274.649073] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 1274.649081] sd 1:1:0:0: [sdc] Write Protect is off [ 1274.649084] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1274.649095] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1274.649108] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 1274.649115] sd 1:2:0:0: [sdd] Write Protect is off [ 1274.649118] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1274.649129] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1274.649142] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 1274.649149] sd 1:5:0:0: [sdf] Write Protect is off [ 1274.649152] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1274.649164] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1568.422342] ata1.00: failed to read SCR 1 (Emask=0x40) [ 1568.422348] ata1.01: failed to read SCR 1 (Emask=0x40) [ 1568.422351] ata1.02: failed to read SCR 1 (Emask=0x40) [ 1568.422354] ata1.03: failed to read SCR 1 (Emask=0x40) [ 1568.422357] ata1.04: failed to read SCR 1 (Emask=0x40) [ 1568.422360] ata1.05: failed to read SCR 1 (Emask=0x40) [ 1568.422363] ata1.06: failed to read SCR 1 (Emask=0x40) [ 1568.422368] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen [ 1568.422371] ata1.15: irq_stat 0x01140010, PHY RDY changed [ 1568.422375] ata1: SError: { 10B8B } [ 1568.422380] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1568.422385] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1568.422390] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1568.422396] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1568.422401] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1568.422406] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1568.422411] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen [ 1568.422418] ata1.15: hard resetting link [ 1573.513729] ata1.15: SATA link down (SStatus 1 SControl 10) [ 1573.765647] ata1.15: qc timeout (cmd 0xe4) [ 1573.765655] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 1573.765658] ata1.15: PMP revalidation failed (errno=-5) [ 1573.765661] ata1.15: retrying hardreset in 5 secs [ 1578.768128] ata1.15: hard resetting link [ 1583.862588] ata1.15: SATA link down (SStatus 1 SControl 10) [ 1584.114506] ata1.15: qc timeout (cmd 0xe4) [ 1584.114513] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 1584.114516] ata1.15: PMP revalidation failed (errno=-5) [ 1584.114520] ata1.15: retrying hardreset in 5 secs [ 1589.116988] ata1.15: hard resetting link [ 1594.211450] ata1.15: SATA link down (SStatus 1 SControl 10) [ 1594.463368] ata1.15: qc timeout (cmd 0xe4) [ 1594.463375] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 1594.463378] ata1.15: PMP revalidation failed (errno=-5) [ 1594.463382] ata1.15: retrying hardreset in 5 secs [ 1599.465849] ata1.15: hard resetting link [ 1604.560308] ata1.15: SATA link down (SStatus 1 SControl 10) [ 1604.812227] ata1.15: qc timeout (cmd 0xe4) [ 1604.812234] ata1.15: failed to read PMP GSCR[0] (Emask=0x4) [ 1604.812237] ata1.15: PMP revalidation failed (errno=-5) [ 1604.812241] ata1.15: retrying hardreset in 5 secs [ 1609.814709] ata1.15: hard resetting link [ 1612.741831] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10) [ 1612.742041] ata1.00: hard resetting link [ 1613.061909] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1613.061913] ata1.01: hard resetting link [ 1613.381812] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1613.381816] ata1.02: hard resetting link [ 1613.701716] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1613.701720] ata1.03: hard resetting link [ 1614.021621] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1614.021624] ata1.04: hard resetting link [ 1614.341521] ata1.04: SATA link down (SStatus 0 SControl 310) [ 1614.341524] ata1.05: hard resetting link [ 1614.661422] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0) [ 1614.661426] ata1.06: hard resetting link [ 1614.981331] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1614.981438] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1614.981442] ata1.00: revalidation failed (errno=-5) [ 1614.981572] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1614.981575] ata1.01: revalidation failed (errno=-5) [ 1614.981703] ata1.02: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1614.981706] ata1.02: revalidation failed (errno=-5) [ 1615.001891] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1615.002073] ata1.05: device is on DMA blacklist, disabling DMA [ 1615.002229] ata1.05: configured for PIO4 [ 1615.002232] ata1: failed to recover some devices, retrying in 5 secs [ 1620.003619] ata1.00: hard resetting link [ 1620.323706] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1620.323710] ata1.01: hard resetting link [ 1620.643612] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1620.643616] ata1.02: hard resetting link [ 1620.963513] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1620.963517] ata1.03: hard resetting link [ 1621.283416] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1621.285731] ata1.00: configured for UDMA/100 [ 1621.287984] ata1.01: configured for UDMA/100 [ 1621.289160] ata1.02: serial number mismatch ' 3NF1H4DW' != ' 3NF1JSWM' [ 1621.289165] ata1.02: revalidation failed (errno=-19) [ 1621.289287] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1621.289290] ata1: failed to recover some devices, retrying in 5 secs [ 1626.289712] ata1.02: hard resetting link [ 1626.609800] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1626.609804] ata1.03: hard resetting link [ 1626.929703] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1626.930885] ata1.02: serial number mismatch ' 3NF1H4DW' != ' 3NF1JSWM' [ 1626.930889] ata1.02: revalidation failed (errno=-19) [ 1626.930892] ata1.02: disabled [ 1626.931064] ata1.03: failed to IDENTIFY (I/O error, err_mask=0x11) [ 1626.931068] ata1: failed to recover some devices, retrying in 5 secs [ 1631.932005] ata1.02: hard resetting link [ 1632.252089] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1632.252094] ata1.03: hard resetting link [ 1632.571990] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 1632.619011] ata1.02: ATA-7: ST3300622A, 3.AND, max UDMA/100 [ 1632.619015] ata1.02: 586072368 sectors, multi 0: LBA48 [ 1632.619019] ata1.02: applying bridge limits [ 1632.677283] ata1.02: configured for UDMA/100 [ 1632.677559] ata1: EH complete [ 1632.677586] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 1632.677598] sd 1:0:0:0: [sdb] Write Protect is off [ 1632.677602] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1632.677615] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1632.677630] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 1632.677638] sd 1:1:0:0: [sdc] Write Protect is off [ 1632.677641] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1632.677652] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1632.677666] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 1632.677674] sd 1:5:0:0: [sdf] Write Protect is off [ 1632.677677] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1632.677688] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1632.677701] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB) [ 1632.677708] sd 1:0:0:0: [sdb] Write Protect is off [ 1632.677711] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1632.677722] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1632.677735] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB) [ 1632.677742] sd 1:1:0:0: [sdc] Write Protect is off [ 1632.677745] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1632.677756] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1632.677769] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB) [ 1632.677776] sd 1:5:0:0: [sdf] Write Protect is off [ 1632.677779] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 1632.677790] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1632.677796] ata1.02: detaching (SCSI 1:2:0:0) [ 1632.677972] sd 1:2:0:0: [sdd] Synchronizing SCSI cache [ 1632.701650] sd 1:2:0:0: [sdd] Stopping disk [ 1632.701883] scsi 1:2:0:0: Direct-Access ATA ST3300622A 3.AN PQ: 0 ANSI: 5 [ 1632.701973] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 1632.701993] sd 1:2:0:0: [sdd] Write Protect is off [ 1632.701997] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1632.702148] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1632.702209] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB) [ 1632.702227] sd 1:2:0:0: [sdd] Write Protect is off [ 1632.702230] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1632.702257] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1632.702261] sdd: sdd1 [ 1633.333656] sd 1:2:0:0: [sdd] Attached SCSI disk [ 1633.333704] sd 1:2:0:0: Attached scsi generic sg4 type 0