128@0xfd900000 port 0xfd800000 irq 17
[   59.832477] ata2: SATA max UDMA/100 host m128@0xfd900000 port 0xfd802000 irq 17
[   59.832480] ata3: SATA max UDMA/100 host m128@0xfd900000 port 0xfd804000 irq 17
[   59.832484] ata4: SATA max UDMA/100 host m128@0xfd900000 port 0xfd806000 irq 17
[   60.346837] input: PC Speaker as /class/input/input5
[   60.504139] Floppy drive(s): fd0 is 1.44M
[   60.521457] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   60.521575] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   60.524072] FDC 0 is a post-1991 82077
[   61.028170] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000059341e]
[   62.031786] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[   62.031931] ata1.15: Port Multiplier 1.1, 0x1095:0x4726 r31, 7 ports, feat 0x1/0x9
[   62.032124] ata1.00: hard resetting link
[   62.351844] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[   62.351851] ata1.01: hard resetting link
[   62.671742] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   62.671745] ata1.02: hard resetting link
[   62.991645] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   62.991647] ata1.03: hard resetting link
[   63.311554] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   63.311561] ata1.04: hard resetting link
[   63.631453] ata1.04: SATA link down (SStatus 0 SControl 320)
[   63.631456] ata1.05: hard resetting link
[   63.951352] ata1.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[   63.951355] ata1.06: hard resetting link
[   64.272205] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[   64.273279] ata1.00: ATA-7: ST3300831A, 3.03, max UDMA/100
[   64.273282] ata1.00: 586072368 sectors, multi 16: LBA48 
[   64.273285] ata1.00: applying bridge limits
[   64.274423] ata1.00: configured for UDMA/100
[   64.276119] ata1.01: ATA-7: ST3300831A, 3.03, max UDMA/100
[   64.276122] ata1.01: 586072368 sectors, multi 0: LBA48 
[   64.276125] ata1.01: applying bridge limits
[   64.277264] ata1.01: configured for UDMA/100
[   64.323947] ata1.02: ATA-7: ST3300622A, 3.AND, max UDMA/100
[   64.323950] ata1.02: 586072368 sectors, multi 0: LBA48 
[   64.323952] ata1.02: applying bridge limits
[   64.382089] ata1.02: configured for UDMA/100
[   64.426133] ata1.03: ATA-7: ST3300622A, 3.AND, max UDMA/100
[   64.426136] ata1.03: 586072368 sectors, multi 0: LBA48 
[   64.426138] ata1.03: applying bridge limits
[   64.484410] ata1.03: configured for UDMA/100
[   64.484478] ata1.05: ATA-6: Config  Disk, PLS12061, max UDMA/133
[   64.484480] ata1.05: 640 sectors, multi 1: LBA 
[   64.484486] ata1.05: device is on DMA blacklist, disabling DMA
[   64.484575] ata1.05: configured for PIO4
[   64.484615] ata1: EH complete
[   66.562409] ata2: SATA link down (SStatus 0 SControl 0)
[   68.641778] ata3: SATA link down (SStatus 0 SControl 0)
[   70.721147] ata4: SATA link down (SStatus 0 SControl 0)
[   70.721260] scsi 1:0:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
[   70.721669] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[   70.721680] sd 1:0:0:0: [sdb] Write Protect is off
[   70.721683] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   70.721695] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.721740] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[   70.721747] sd 1:0:0:0: [sdb] Write Protect is off
[   70.721750] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   70.721761] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.721765]  sdb: sdb1
[   70.728578] sd 1:0:0:0: [sdb] Attached SCSI disk
[   70.728614] sd 1:0:0:0: Attached scsi generic sg2 type 0
[   70.729063] scsi 1:1:0:0: Direct-Access     ATA      ST3300831A       3.03 PQ: 0 ANSI: 5
[   70.729336] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[   70.729343] sd 1:1:0:0: [sdc] Write Protect is off
[   70.729346] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[   70.729357] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.729388] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[   70.729395] sd 1:1:0:0: [sdc] Write Protect is off
[   70.729398] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[   70.729409] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.729411]  sdc: sdc1
[   70.751335] sd 1:1:0:0: [sdc] Attached SCSI disk
[   70.751366] sd 1:1:0:0: Attached scsi generic sg3 type 0
[   70.751842] scsi 1:2:0:0: Direct-Access     ATA      ST3300622A       3.AN PQ: 0 ANSI: 5
[   70.751903] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[   70.751911] sd 1:2:0:0: [sdd] Write Protect is off
[   70.751913] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[   70.751924] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.751953] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[   70.751960] sd 1:2:0:0: [sdd] Write Protect is off
[   70.751963] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[   70.751974] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.751977]  sdd: sdd1
[   70.767637] sd 1:2:0:0: [sdd] Attached SCSI disk
[   70.767670] sd 1:2:0:0: Attached scsi generic sg4 type 0
[   70.767716] scsi 1:3:0:0: Direct-Access     ATA      ST3300622A       3.AN PQ: 0 ANSI: 5
[   70.767775] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[   70.767782] sd 1:3:0:0: [sde] Write Protect is off
[   70.767785] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[   70.767796] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.768539] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[   70.768546] sd 1:3:0:0: [sde] Write Protect is off
[   70.768549] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[   70.768560] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   70.768563]  sde: sde1
[   70.785093] sd 1:3:0:0: [sde] Attached SCSI disk
[   70.785128] sd 1:3:0:0: Attached scsi generic sg5 type 0
[   70.785174] scsi 1:5:0:0: Direct-Access     ATA      Config  Disk     PLS1 PQ: 0 ANSI: 5
[   70.785234] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[   70.785241] sd 1:5:0:0: [sdf] Write Protect is off
[   70.785244] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[   70.785255] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   70.785284] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[   70.785291] sd 1:5:0:0: [sdf] Write Protect is off
[   70.785293] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[   70.785304] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[   70.785307]  sdf: unknown partition table
[   70.786159] sd 1:5:0:0: [sdf] Attached SCSI disk
[   70.786191] sd 1:5:0:0: Attached scsi generic sg6 type 0
[   70.786363] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
[   70.786553] ehci_hcd 0000:00:10.4: EHCI Host Controller
[   70.786744] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[   70.786795] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000
[   70.797142] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   70.797280] usb usb1: configuration #1 chosen from 1 choice
[   70.797308] hub 1-0:1.0: USB hub found
[   70.797317] hub 1-0:1.0: 8 ports detected
[   70.901323] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
[   70.901336] uhci_hcd 0000:00:10.0: UHCI Host Controller
[   70.901363] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[   70.901386] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b800
[   70.901506] usb usb2: configuration #1 chosen from 1 choice
[   70.901531] hub 2-0:1.0: USB hub found
[   70.901539] hub 2-0:1.0: 2 ports detected
[   71.005191] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
[   71.005204] uhci_hcd 0000:00:10.1: UHCI Host Controller
[   71.005229] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[   71.005252] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000c000
[   71.005373] usb usb3: configuration #1 chosen from 1 choice
[   71.005398] hub 3-0:1.0: USB hub found
[   71.005405] hub 3-0:1.0: 2 ports detected
[   71.109172] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
[   71.109185] uhci_hcd 0000:00:10.2: UHCI Host Controller
[   71.109211] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[   71.109235] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c400
[   71.109351] usb usb4: configuration #1 chosen from 1 choice
[   71.109376] hub 4-0:1.0: USB hub found
[   71.109383] hub 4-0:1.0: 2 ports detected
[   71.213117] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
[   71.213130] uhci_hcd 0000:00:10.3: UHCI Host Controller
[   71.213155] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[   71.213179] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c800
[   71.213299] usb usb5: configuration #1 chosen from 1 choice
[   71.213325] hub 5-0:1.0: USB hub found
[   71.213332] hub 5-0:1.0: 2 ports detected
[   71.317585] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[   71.319838] Audigy2 value: Special config.
[   73.765264] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[   73.765268] Copyright (c) 1999-2006 Intel Corporation.
[   73.765309] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
[   73.765314] PCI: Disallowing DAC for device 0000:00:0e.0
[   74.025736] e1000: 0000:00:0e.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:62:c5:46
[   74.201234] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   74.355702] ReiserFS: hdb1: found reiserfs format "3.6" with standard journal
[   74.355715] ReiserFS: hdb1: using ordered data mode
[   74.392680] ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   74.394057] ReiserFS: hdb1: checking transaction log (hdb1)
[   74.489291] ReiserFS: hdb1: Using r5 hash to sort names
[   74.553988] ReiserFS: hda2: found reiserfs format "3.6" with standard journal
[   74.553998] ReiserFS: hda2: using ordered data mode
[   74.558818] ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   74.560151] ReiserFS: hda2: checking transaction log (hda2)
[   74.623128] ReiserFS: hda2: Using r5 hash to sort names
[   80.456682] hda: UDMA/100 mode selected
[   80.460729] hdb: UDMA/133 mode selected
[   80.515263] hdc: UDMA/33 mode selected
[   80.532803] hdd: UDMA/33 mode selected
[   83.053804] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   87.342494] w83627hf: Found W83697HF chip at 0x290
[  159.125858] ata1.00: failed to read SCR 1 (Emask=0x40)
[  159.125863] ata1.01: failed to read SCR 1 (Emask=0x40)
[  159.125866] ata1.02: failed to read SCR 1 (Emask=0x40)
[  159.125869] ata1.03: failed to read SCR 1 (Emask=0x40)
[  159.125871] ata1.04: failed to read SCR 1 (Emask=0x40)
[  159.125874] ata1.05: failed to read SCR 1 (Emask=0x40)
[  159.125876] ata1.06: failed to read SCR 1 (Emask=0x40)
[  159.125880] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
[  159.125883] ata1.15: irq_stat 0x01140010, PHY RDY changed
[  159.125886] ata1: SError: { 10B8B }
[  159.125890] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125895] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125899] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125904] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125908] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125912] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125917] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125923] ata1.15: hard resetting link
[  164.216778] ata1.15: SATA link down (SStatus 1 SControl 0)
[  164.468696] ata1.15: qc timeout (cmd 0xe4)
[  164.468703] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  164.468706] ata1.15: PMP revalidation failed (errno=-5)
[  164.468708] ata1.15: retrying hardreset in 5 secs
[  169.471177] ata1.15: hard resetting link
[  174.565637] ata1.15: SATA link down (SStatus 1 SControl 0)
[  174.817555] ata1.15: qc timeout (cmd 0xe4)
[  174.817562] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  174.817565] ata1.15: PMP revalidation failed (errno=-5)
[  174.817568] ata1.15: limiting SATA link speed to 1.5 Gbps
[  174.817570] ata1.15: retrying hardreset in 5 secs
[  179.820043] ata1.15: hard resetting link
[  182.019380] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  182.019590] ata1.00: hard resetting link
[  182.339460] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  182.339463] ata1.01: hard resetting link
[  182.659362] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  182.659365] ata1.02: hard resetting link
[  182.979265] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  182.979269] ata1.03: hard resetting link
[  183.299169] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  183.299172] ata1.04: hard resetting link
[  183.619071] ata1.04: SATA link down (SStatus 0 SControl 310)
[  183.619074] ata1.05: hard resetting link
[  183.938971] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  183.938975] ata1.06: hard resetting link
[  184.258874] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  184.261106] ata1.00: configured for UDMA/100
[  184.263303] ata1.01: configured for UDMA/100
[  184.263398] ata1.02: failed to IDENTIFY (I/O error, err_mask=0x11)
[  184.263401] ata1.02: revalidation failed (errno=-5)
[  184.263406] ata1.15: hard resetting link
[  186.462034] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  186.462308] ata1.00: hard resetting link
[  186.782113] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  186.782117] ata1.01: hard resetting link
[  187.102015] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  187.102018] ata1.02: hard resetting link
[  187.421918] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  187.421922] ata1.03: hard resetting link
[  187.741820] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  187.741823] ata1.04: hard resetting link
[  188.061723] ata1.04: SATA link down (SStatus 0 SControl 310)
[  188.061727] ata1.05: hard resetting link
[  188.381625] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  188.381628] ata1.06: hard resetting link
[  188.701528] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  188.703706] ata1.00: configured for UDMA/100
[  188.705935] ata1.01: configured for UDMA/100
[  188.811817] ata1.02: configured for UDMA/100
[  188.915919] ata1.03: configured for UDMA/100
[  188.916051] ata1.05: device is on DMA blacklist, disabling DMA
[  188.916182] ata1.05: configured for PIO4
[  188.916453] ata1: EH complete
[  188.916481] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  188.916492] sd 1:0:0:0: [sdb] Write Protect is off
[  188.916496] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  188.916508] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916524] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  188.916532] sd 1:1:0:0: [sdc] Write Protect is off
[  188.916535] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  188.916546] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916560] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  188.916567] sd 1:2:0:0: [sdd] Write Protect is off
[  188.916570] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  188.916581] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916595] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  188.916602] sd 1:3:0:0: [sde] Write Protect is off
[  188.916605] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  188.916616] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916629] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  188.916637] sd 1:5:0:0: [sdf] Write Protect is off
[  188.916640] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  188.916651] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  188.916664] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  188.916671] sd 1:0:0:0: [sdb] Write Protect is off
[  188.916674] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  188.916686] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916698] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  188.916705] sd 1:1:0:0: [sdc] Write Protect is off
[  188.916708] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  188.916720] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916732] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  188.916739] sd 1:2:0:0: [sdd] Write Protect is off
[  188.916742] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  188.916753] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916766] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  188.916773] sd 1:3:0:0: [sde] Write Protect is off
[  188.916776] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  188.916787] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916799] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  188.916807] sd 1:5:0:0: [sdf] Write Protect is off
[  188.916810] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  188.916821] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  233.874452] ata1.00: failed to read SCR 1 (Emask=0x40)
[  233.874458] ata1.01: failed to read SCR 1 (Emask=0x40)
[  233.874462] ata1.02: failed to read SCR 1 (Emask=0x40)
[  233.874465] ata1.03: failed to read SCR 1 (Emask=0x40)
[  233.874468] ata1.04: failed to read SCR 1 (Emask=0x40)
[  233.874471] ata1.05: failed to read SCR 1 (Emask=0x40)
[  233.874474] ata1.06: failed to read SCR 1 (Emask=0x40)
[  233.874478] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
[  233.874482] ata1.15: irq_stat 0x01140010, PHY RDY changed
[  233.874486] ata1: SError: { 10B8B }
[  233.874490] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874495] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874501] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874506] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874511] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874516] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874521] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874529] ata1.15: hard resetting link
[  238.966100] ata1.15: SATA link down (SStatus 1 SControl 10)
[  239.218017] ata1.15: qc timeout (cmd 0xe4)
[  239.218026] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  239.218029] ata1.15: PMP revalidation failed (errno=-5)
[  239.218032] ata1.15: retrying hardreset in 5 secs
[  244.220499] ata1.15: hard resetting link
[  249.314958] ata1.15: SATA link down (SStatus 1 SControl 10)
[  249.566876] ata1.15: qc timeout (cmd 0xe4)
[  249.566883] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  249.566886] ata1.15: PMP revalidation failed (errno=-5)
[  249.566890] ata1.15: retrying hardreset in 5 secs
[  254.569359] ata1.15: hard resetting link
[  256.768701] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  256.768897] ata1.00: hard resetting link
[  257.088783] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  257.088787] ata1.01: hard resetting link
[  257.408684] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  257.408688] ata1.02: hard resetting link
[  257.728587] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  257.728591] ata1.03: hard resetting link
[  258.048491] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  258.048495] ata1.04: hard resetting link
[  258.368394] ata1.04: SATA link down (SStatus 0 SControl 310)
[  258.368397] ata1.05: hard resetting link
[  258.688294] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  258.688298] ata1.06: hard resetting link
[  259.008199] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  259.008295] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x11)
[  259.008299] ata1.00: revalidation failed (errno=-5)
[  259.008304] ata1.15: hard resetting link
[  261.207356] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  261.207634] ata1.00: hard resetting link
[  261.527434] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  261.527439] ata1.01: hard resetting link
[  261.847337] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  261.847340] ata1.02: hard resetting link
[  262.167238] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  262.167242] ata1.03: hard resetting link
[  262.487142] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  262.487146] ata1.04: hard resetting link
[  262.807046] ata1.04: SATA link down (SStatus 0 SControl 310)
[  262.807050] ata1.05: hard resetting link
[  263.126946] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  263.126950] ata1.06: hard resetting link
[  263.446852] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  263.449093] ata1.00: configured for UDMA/100
[  263.451311] ata1.01: configured for UDMA/100
[  263.556976] ata1.02: configured for UDMA/100
[  263.658661] ata1.03: configured for UDMA/100
[  263.658793] ata1.05: device is on DMA blacklist, disabling DMA
[  263.658923] ata1.05: configured for PIO4
[  263.659192] ata1: EH complete
[  263.659218] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  263.659229] sd 1:0:0:0: [sdb] Write Protect is off
[  263.659232] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  263.659245] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659260] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  263.659267] sd 1:1:0:0: [sdc] Write Protect is off
[  263.659270] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  263.659281] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659295] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  263.659303] sd 1:2:0:0: [sdd] Write Protect is off
[  263.659305] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  263.659317] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659330] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  263.659337] sd 1:3:0:0: [sde] Write Protect is off
[  263.659340] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  263.659351] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659365] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  263.659372] sd 1:5:0:0: [sdf] Write Protect is off
[  263.659375] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  263.659386] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  263.659399] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  263.659407] sd 1:0:0:0: [sdb] Write Protect is off
[  263.659409] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  263.659421] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659433] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  263.659440] sd 1:1:0:0: [sdc] Write Protect is off
[  263.659443] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  263.659454] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659467] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  263.659474] sd 1:2:0:0: [sdd] Write Protect is off
[  263.659477] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  263.659488] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659500] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  263.659508] sd 1:3:0:0: [sde] Write Protect is off
[  263.659511] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  263.659522] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659534] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  263.659541] sd 1:5:0:0: [sdf] Write Protect is off
[  263.659544] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  263.659555] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  337.619074] ata1.00: failed to read SCR 1 (Emask=0x40)
[  337.619079] ata1.01: failed to read SCR 1 (Emask=0x40)
[  337.619083] ata1.02: failed to read SCR 1 (Emask=0x40)
[  337.619086] ata1.03: failed to read SCR 1 (Emask=0x40)
[  337.619089] ata1.04: failed to read SCR 1 (Emask=0x40)
[  337.619092] ata1.05: failed to read SCR 1 (Emask=0x40)
[  337.619095] ata1.06: failed to read SCR 1 (Emask=0x40)
[  337.619099] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
[  337.619103] ata1.15: irq_stat 0x01940090, PHY RDY changed
[  337.619107] ata1: SError: { 10B8B }
[  337.619111] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619116] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619122] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619127] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619132] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619137] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619142] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619150] ata1.15: hard resetting link
[  339.695540] ata1.15: SATA link down (SStatus 0 SControl 10)
[  339.947457] ata1.15: qc timeout (cmd 0xe4)
[  339.947465] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  339.947469] ata1.15: PMP revalidation failed (errno=-5)
[  339.947472] ata1.15: retrying hardreset in 5 secs
[  344.949939] ata1.15: hard resetting link
[  347.029314] ata1.15: SATA link down (SStatus 0 SControl 10)
[  347.281232] ata1.15: qc timeout (cmd 0xe4)
[  347.281239] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  347.281242] ata1.15: PMP revalidation failed (errno=-5)
[  347.281246] ata1.15: retrying hardreset in 5 secs
[  352.283714] ata1.15: hard resetting link
[  356.250521] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  356.250717] ata1.00: hard resetting link
[  356.570601] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  356.570605] ata1.01: hard resetting link
[  356.890503] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  356.890507] ata1.02: hard resetting link
[  357.210406] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  357.210411] ata1.03: hard resetting link
[  357.530309] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  357.530313] ata1.04: hard resetting link
[  357.850212] ata1.04: SATA link down (SStatus 0 SControl 310)
[  357.850216] ata1.05: hard resetting link
[  358.170112] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  358.170116] ata1.06: hard resetting link
[  358.490020] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  358.492276] ata1.00: configured for UDMA/100
[  358.494506] ata1.01: configured for UDMA/100
[  358.595946] ata1.02: configured for UDMA/100
[  358.705215] ata1.03: configured for UDMA/100
[  358.705316] ata1.05: device is on DMA blacklist, disabling DMA
[  358.705472] ata1.05: configured for PIO4
[  358.705734] ata1: EH complete
[  358.705759] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  358.705773] sd 1:0:0:0: [sdb] Write Protect is off
[  358.705776] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  358.705789] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705804] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  358.705812] sd 1:1:0:0: [sdc] Write Protect is off
[  358.705815] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  358.705827] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705841] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  358.705849] sd 1:2:0:0: [sdd] Write Protect is off
[  358.705852] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  358.705863] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705877] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  358.705885] sd 1:3:0:0: [sde] Write Protect is off
[  358.705888] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  358.705900] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705913] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  358.705921] sd 1:5:0:0: [sdf] Write Protect is off
[  358.705924] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  358.705936] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  358.705949] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  358.705957] sd 1:0:0:0: [sdb] Write Protect is off
[  358.705960] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  358.705972] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705985] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  358.705992] sd 1:1:0:0: [sdc] Write Protect is off
[  358.705995] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  358.706007] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.706020] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  358.706028] sd 1:2:0:0: [sdd] Write Protect is off
[  358.706030] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  358.706042] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.706055] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  358.706063] sd 1:3:0:0: [sde] Write Protect is off
[  358.706066] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  358.706077] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.706090] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  358.706098] sd 1:5:0:0: [sdf] Write Protect is off
[  358.706101] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  358.706112] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA