found
[   71.213332] hub 5-0:1.0: 2 ports detected
[   71.317585] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[   71.319838] Audigy2 value: Special config.
[   73.765264] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
[   73.765268] Copyright (c) 1999-2006 Intel Corporation.
[   73.765309] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 19
[   73.765314] PCI: Disallowing DAC for device 0000:00:0e.0
[   74.025736] e1000: 0000:00:0e.0: e1000_probe: (PCI:33MHz:32-bit) 00:0e:0c:62:c5:46
[   74.201234] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[   74.355702] ReiserFS: hdb1: found reiserfs format "3.6" with standard journal
[   74.355715] ReiserFS: hdb1: using ordered data mode
[   74.392680] ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   74.394057] ReiserFS: hdb1: checking transaction log (hdb1)
[   74.489291] ReiserFS: hdb1: Using r5 hash to sort names
[   74.553988] ReiserFS: hda2: found reiserfs format "3.6" with standard journal
[   74.553998] ReiserFS: hda2: using ordered data mode
[   74.558818] ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   74.560151] ReiserFS: hda2: checking transaction log (hda2)
[   74.623128] ReiserFS: hda2: Using r5 hash to sort names
[   80.456682] hda: UDMA/100 mode selected
[   80.460729] hdb: UDMA/133 mode selected
[   80.515263] hdc: UDMA/33 mode selected
[   80.532803] hdd: UDMA/33 mode selected
[   83.053804] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[   87.342494] w83627hf: Found W83697HF chip at 0x290
[  159.125858] ata1.00: failed to read SCR 1 (Emask=0x40)
[  159.125863] ata1.01: failed to read SCR 1 (Emask=0x40)
[  159.125866] ata1.02: failed to read SCR 1 (Emask=0x40)
[  159.125869] ata1.03: failed to read SCR 1 (Emask=0x40)
[  159.125871] ata1.04: failed to read SCR 1 (Emask=0x40)
[  159.125874] ata1.05: failed to read SCR 1 (Emask=0x40)
[  159.125876] ata1.06: failed to read SCR 1 (Emask=0x40)
[  159.125880] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
[  159.125883] ata1.15: irq_stat 0x01140010, PHY RDY changed
[  159.125886] ata1: SError: { 10B8B }
[  159.125890] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125895] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125899] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125904] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125908] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125912] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125917] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  159.125923] ata1.15: hard resetting link
[  164.216778] ata1.15: SATA link down (SStatus 1 SControl 0)
[  164.468696] ata1.15: qc timeout (cmd 0xe4)
[  164.468703] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  164.468706] ata1.15: PMP revalidation failed (errno=-5)
[  164.468708] ata1.15: retrying hardreset in 5 secs
[  169.471177] ata1.15: hard resetting link
[  174.565637] ata1.15: SATA link down (SStatus 1 SControl 0)
[  174.817555] ata1.15: qc timeout (cmd 0xe4)
[  174.817562] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  174.817565] ata1.15: PMP revalidation failed (errno=-5)
[  174.817568] ata1.15: limiting SATA link speed to 1.5 Gbps
[  174.817570] ata1.15: retrying hardreset in 5 secs
[  179.820043] ata1.15: hard resetting link
[  182.019380] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  182.019590] ata1.00: hard resetting link
[  182.339460] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  182.339463] ata1.01: hard resetting link
[  182.659362] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  182.659365] ata1.02: hard resetting link
[  182.979265] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  182.979269] ata1.03: hard resetting link
[  183.299169] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  183.299172] ata1.04: hard resetting link
[  183.619071] ata1.04: SATA link down (SStatus 0 SControl 310)
[  183.619074] ata1.05: hard resetting link
[  183.938971] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  183.938975] ata1.06: hard resetting link
[  184.258874] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  184.261106] ata1.00: configured for UDMA/100
[  184.263303] ata1.01: configured for UDMA/100
[  184.263398] ata1.02: failed to IDENTIFY (I/O error, err_mask=0x11)
[  184.263401] ata1.02: revalidation failed (errno=-5)
[  184.263406] ata1.15: hard resetting link
[  186.462034] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  186.462308] ata1.00: hard resetting link
[  186.782113] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  186.782117] ata1.01: hard resetting link
[  187.102015] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  187.102018] ata1.02: hard resetting link
[  187.421918] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  187.421922] ata1.03: hard resetting link
[  187.741820] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  187.741823] ata1.04: hard resetting link
[  188.061723] ata1.04: SATA link down (SStatus 0 SControl 310)
[  188.061727] ata1.05: hard resetting link
[  188.381625] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  188.381628] ata1.06: hard resetting link
[  188.701528] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  188.703706] ata1.00: configured for UDMA/100
[  188.705935] ata1.01: configured for UDMA/100
[  188.811817] ata1.02: configured for UDMA/100
[  188.915919] ata1.03: configured for UDMA/100
[  188.916051] ata1.05: device is on DMA blacklist, disabling DMA
[  188.916182] ata1.05: configured for PIO4
[  188.916453] ata1: EH complete
[  188.916481] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  188.916492] sd 1:0:0:0: [sdb] Write Protect is off
[  188.916496] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  188.916508] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916524] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  188.916532] sd 1:1:0:0: [sdc] Write Protect is off
[  188.916535] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  188.916546] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916560] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  188.916567] sd 1:2:0:0: [sdd] Write Protect is off
[  188.916570] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  188.916581] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916595] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  188.916602] sd 1:3:0:0: [sde] Write Protect is off
[  188.916605] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  188.916616] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916629] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  188.916637] sd 1:5:0:0: [sdf] Write Protect is off
[  188.916640] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  188.916651] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  188.916664] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  188.916671] sd 1:0:0:0: [sdb] Write Protect is off
[  188.916674] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  188.916686] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916698] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  188.916705] sd 1:1:0:0: [sdc] Write Protect is off
[  188.916708] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  188.916720] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916732] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  188.916739] sd 1:2:0:0: [sdd] Write Protect is off
[  188.916742] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  188.916753] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916766] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  188.916773] sd 1:3:0:0: [sde] Write Protect is off
[  188.916776] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  188.916787] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  188.916799] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  188.916807] sd 1:5:0:0: [sdf] Write Protect is off
[  188.916810] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  188.916821] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  233.874452] ata1.00: failed to read SCR 1 (Emask=0x40)
[  233.874458] ata1.01: failed to read SCR 1 (Emask=0x40)
[  233.874462] ata1.02: failed to read SCR 1 (Emask=0x40)
[  233.874465] ata1.03: failed to read SCR 1 (Emask=0x40)
[  233.874468] ata1.04: failed to read SCR 1 (Emask=0x40)
[  233.874471] ata1.05: failed to read SCR 1 (Emask=0x40)
[  233.874474] ata1.06: failed to read SCR 1 (Emask=0x40)
[  233.874478] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
[  233.874482] ata1.15: irq_stat 0x01140010, PHY RDY changed
[  233.874486] ata1: SError: { 10B8B }
[  233.874490] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874495] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874501] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874506] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874511] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874516] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874521] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  233.874529] ata1.15: hard resetting link
[  238.966100] ata1.15: SATA link down (SStatus 1 SControl 10)
[  239.218017] ata1.15: qc timeout (cmd 0xe4)
[  239.218026] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  239.218029] ata1.15: PMP revalidation failed (errno=-5)
[  239.218032] ata1.15: retrying hardreset in 5 secs
[  244.220499] ata1.15: hard resetting link
[  249.314958] ata1.15: SATA link down (SStatus 1 SControl 10)
[  249.566876] ata1.15: qc timeout (cmd 0xe4)
[  249.566883] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  249.566886] ata1.15: PMP revalidation failed (errno=-5)
[  249.566890] ata1.15: retrying hardreset in 5 secs
[  254.569359] ata1.15: hard resetting link
[  256.768701] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  256.768897] ata1.00: hard resetting link
[  257.088783] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  257.088787] ata1.01: hard resetting link
[  257.408684] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  257.408688] ata1.02: hard resetting link
[  257.728587] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  257.728591] ata1.03: hard resetting link
[  258.048491] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  258.048495] ata1.04: hard resetting link
[  258.368394] ata1.04: SATA link down (SStatus 0 SControl 310)
[  258.368397] ata1.05: hard resetting link
[  258.688294] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  258.688298] ata1.06: hard resetting link
[  259.008199] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  259.008295] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x11)
[  259.008299] ata1.00: revalidation failed (errno=-5)
[  259.008304] ata1.15: hard resetting link
[  261.207356] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  261.207634] ata1.00: hard resetting link
[  261.527434] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  261.527439] ata1.01: hard resetting link
[  261.847337] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  261.847340] ata1.02: hard resetting link
[  262.167238] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  262.167242] ata1.03: hard resetting link
[  262.487142] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  262.487146] ata1.04: hard resetting link
[  262.807046] ata1.04: SATA link down (SStatus 0 SControl 310)
[  262.807050] ata1.05: hard resetting link
[  263.126946] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  263.126950] ata1.06: hard resetting link
[  263.446852] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  263.449093] ata1.00: configured for UDMA/100
[  263.451311] ata1.01: configured for UDMA/100
[  263.556976] ata1.02: configured for UDMA/100
[  263.658661] ata1.03: configured for UDMA/100
[  263.658793] ata1.05: device is on DMA blacklist, disabling DMA
[  263.658923] ata1.05: configured for PIO4
[  263.659192] ata1: EH complete
[  263.659218] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  263.659229] sd 1:0:0:0: [sdb] Write Protect is off
[  263.659232] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  263.659245] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659260] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  263.659267] sd 1:1:0:0: [sdc] Write Protect is off
[  263.659270] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  263.659281] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659295] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  263.659303] sd 1:2:0:0: [sdd] Write Protect is off
[  263.659305] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  263.659317] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659330] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  263.659337] sd 1:3:0:0: [sde] Write Protect is off
[  263.659340] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  263.659351] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659365] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  263.659372] sd 1:5:0:0: [sdf] Write Protect is off
[  263.659375] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  263.659386] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  263.659399] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  263.659407] sd 1:0:0:0: [sdb] Write Protect is off
[  263.659409] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  263.659421] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659433] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  263.659440] sd 1:1:0:0: [sdc] Write Protect is off
[  263.659443] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  263.659454] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659467] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  263.659474] sd 1:2:0:0: [sdd] Write Protect is off
[  263.659477] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  263.659488] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659500] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  263.659508] sd 1:3:0:0: [sde] Write Protect is off
[  263.659511] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  263.659522] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  263.659534] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  263.659541] sd 1:5:0:0: [sdf] Write Protect is off
[  263.659544] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  263.659555] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  337.619074] ata1.00: failed to read SCR 1 (Emask=0x40)
[  337.619079] ata1.01: failed to read SCR 1 (Emask=0x40)
[  337.619083] ata1.02: failed to read SCR 1 (Emask=0x40)
[  337.619086] ata1.03: failed to read SCR 1 (Emask=0x40)
[  337.619089] ata1.04: failed to read SCR 1 (Emask=0x40)
[  337.619092] ata1.05: failed to read SCR 1 (Emask=0x40)
[  337.619095] ata1.06: failed to read SCR 1 (Emask=0x40)
[  337.619099] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
[  337.619103] ata1.15: irq_stat 0x01940090, PHY RDY changed
[  337.619107] ata1: SError: { 10B8B }
[  337.619111] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619116] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619122] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619127] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619132] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619137] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619142] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  337.619150] ata1.15: hard resetting link
[  339.695540] ata1.15: SATA link down (SStatus 0 SControl 10)
[  339.947457] ata1.15: qc timeout (cmd 0xe4)
[  339.947465] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  339.947469] ata1.15: PMP revalidation failed (errno=-5)
[  339.947472] ata1.15: retrying hardreset in 5 secs
[  344.949939] ata1.15: hard resetting link
[  347.029314] ata1.15: SATA link down (SStatus 0 SControl 10)
[  347.281232] ata1.15: qc timeout (cmd 0xe4)
[  347.281239] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  347.281242] ata1.15: PMP revalidation failed (errno=-5)
[  347.281246] ata1.15: retrying hardreset in 5 secs
[  352.283714] ata1.15: hard resetting link
[  356.250521] ata1.15: SATA link up 1.5 Gbps (SStatus 113 SControl 10)
[  356.250717] ata1.00: hard resetting link
[  356.570601] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  356.570605] ata1.01: hard resetting link
[  356.890503] ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  356.890507] ata1.02: hard resetting link
[  357.210406] ata1.02: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  357.210411] ata1.03: hard resetting link
[  357.530309] ata1.03: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  357.530313] ata1.04: hard resetting link
[  357.850212] ata1.04: SATA link down (SStatus 0 SControl 310)
[  357.850216] ata1.05: hard resetting link
[  358.170112] ata1.05: SATA link up 1.5 Gbps (SStatus 113 SControl 0)
[  358.170116] ata1.06: hard resetting link
[  358.490020] ata1.06: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[  358.492276] ata1.00: configured for UDMA/100
[  358.494506] ata1.01: configured for UDMA/100
[  358.595946] ata1.02: configured for UDMA/100
[  358.705215] ata1.03: configured for UDMA/100
[  358.705316] ata1.05: device is on DMA blacklist, disabling DMA
[  358.705472] ata1.05: configured for PIO4
[  358.705734] ata1: EH complete
[  358.705759] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  358.705773] sd 1:0:0:0: [sdb] Write Protect is off
[  358.705776] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  358.705789] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705804] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  358.705812] sd 1:1:0:0: [sdc] Write Protect is off
[  358.705815] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  358.705827] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705841] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  358.705849] sd 1:2:0:0: [sdd] Write Protect is off
[  358.705852] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  358.705863] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705877] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  358.705885] sd 1:3:0:0: [sde] Write Protect is off
[  358.705888] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  358.705900] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705913] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  358.705921] sd 1:5:0:0: [sdf] Write Protect is off
[  358.705924] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  358.705936] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  358.705949] sd 1:0:0:0: [sdb] 586072368 512-byte hardware sectors (300069 MB)
[  358.705957] sd 1:0:0:0: [sdb] Write Protect is off
[  358.705960] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[  358.705972] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.705985] sd 1:1:0:0: [sdc] 586072368 512-byte hardware sectors (300069 MB)
[  358.705992] sd 1:1:0:0: [sdc] Write Protect is off
[  358.705995] sd 1:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[  358.706007] sd 1:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.706020] sd 1:2:0:0: [sdd] 586072368 512-byte hardware sectors (300069 MB)
[  358.706028] sd 1:2:0:0: [sdd] Write Protect is off
[  358.706030] sd 1:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[  358.706042] sd 1:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.706055] sd 1:3:0:0: [sde] 586072368 512-byte hardware sectors (300069 MB)
[  358.706063] sd 1:3:0:0: [sde] Write Protect is off
[  358.706066] sd 1:3:0:0: [sde] Mode Sense: 00 3a 00 00
[  358.706077] sd 1:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  358.706090] sd 1:5:0:0: [sdf] 640 512-byte hardware sectors (0 MB)
[  358.706098] sd 1:5:0:0: [sdf] Write Protect is off
[  358.706101] sd 1:5:0:0: [sdf] Mode Sense: 00 3a 00 00
[  358.706112] sd 1:5:0:0: [sdf] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  404.739637] ata1.15: limiting speed to UDMA7:PIO5
[  404.739644] ata1.00: failed to read SCR 1 (Emask=0x40)
[  404.739648] ata1.01: failed to read SCR 1 (Emask=0x40)
[  404.739651] ata1.02: failed to read SCR 1 (Emask=0x40)
[  404.739654] ata1.03: failed to read SCR 1 (Emask=0x40)
[  404.739657] ata1.04: failed to read SCR 1 (Emask=0x40)
[  404.739660] ata1.05: failed to read SCR 1 (Emask=0x40)
[  404.739663] ata1.06: failed to read SCR 1 (Emask=0x40)
[  404.739667] ata1.15: exception Emask 0x10 SAct 0x0 SErr 0x80000 action 0xa frozen
[  404.739671] ata1.15: irq_stat 0x01140010, PHY RDY changed
[  404.739675] ata1: SError: { 10B8B }
[  404.739679] ata1.00: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  404.739685] ata1.01: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  404.739690] ata1.02: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  404.739695] ata1.03: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  404.739700] ata1.04: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  404.739705] ata1.05: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  404.739710] ata1.06: exception Emask 0x100 SAct 0x0 SErr 0x0 action 0x6 frozen
[  404.739718] ata1.15: hard resetting link
[  409.830262] ata1.15: SATA link down (SStatus 1 SControl 10)
[  410.082180] ata1.15: qc timeout (cmd 0xe4)
[  410.082188] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  410.082191] ata1.15: PMP revalidation failed (errno=-5)
[  410.082194] ata1.15: retrying hardreset in 5 secs
[  415.084662] ata1.15: hard resetting link
[  420.179121] ata1.15: SATA link down (SStatus 1 SControl 10)
[  420.431039] ata1.15: qc timeout (cmd 0xe4)
[  420.431047] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  420.431050] ata1.15: PMP revalidation failed (errno=-5)
[  420.431054] ata1.15: retrying hardreset in 5 secs
[  425.433523] ata1.15: hard resetting link
[  435.438490] ata1.15: softreset failed (timeout)
[  435.438494] ata1.15: hard resetting link
[  445.443457] ata1.15: softreset failed (timeout)
[  445.443463] ata1.15: hard resetting link
[  480.432842] ata1.15: softreset failed (timeout)
[  480.432850] ata1.15: hard resetting link
[  485.431325] ata1.15: softreset failed (timeout)
[  485.431329] ata1.15: failed to reset PMP, giving up
[  485.431332] ata1.15: Port Multiplier detaching
[  485.431340] ata1.00: disabled
[  485.431343] ata1.01: disabled
[  485.431346] ata1.02: disabled
[  485.431348] ata1.03: disabled
[  485.431350] ata1.05: disabled
[  485.431354] ata1.00: disabled
[  485.431360] ata1: hard resetting link
[  495.436287] ata1: softreset failed (timeout)
[  495.436290] ata1: hard resetting link
[  505.441252] ata1: softreset failed (timeout)
[  505.441255] ata1: hard resetting link
[  540.430639] ata1: softreset failed (timeout)
[  540.430647] ata1: limiting SATA link speed to 1.5 Gbps
[  540.430650] ata1: hard resetting link
[  545.525097] ata1: SATA link down (SStatus 1 SControl 10)
[  545.525115] ata1: EH complete
[  545.525125] ata1.00: detaching (SCSI 1:0:0:0)
[  545.525299] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[  545.525613] sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
[  545.525617] sd 1:0:0:0: [sdb] Stopping disk
[  545.525623] sd 1:0:0:0: [sdb] START_STOP FAILED
[  545.525626] sd 1:0:0:0: [sdb] Result: hostbyte=0x04 driverbyte=0x00
[  545.525663] ata1.01: detaching (SCSI 1:1:0:0)
[  545.525799] sd 1:1:0:0: [sdc] Synchronizing SCSI cache
[  545.525944] sd 1:1:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
[  545.525948] sd 1:1:0:0: [sdc] Stopping disk
[  545.525970] sd 1:1:0:0: [sdc] START_STOP FAILED
[  545.525972] sd 1:1:0:0: [sdc] Result: hostbyte=0x04 driverbyte=0x00
[  545.526000] ata1.02: detaching (SCSI 1:2:0:0)
[  545.526146] sd 1:2:0:0: [sdd] Synchronizing SCSI cache
[  545.527048] sd 1:2:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
[  545.527053] sd 1:2:0:0: [sdd] Stopping disk
[  545.527071] sd 1:2:0:0: [sdd] START_STOP FAILED
[  545.527074] sd 1:2:0:0: [sdd] Result: hostbyte=0x04 driverbyte=0x00
[  545.527106] ata1.03: detaching (SCSI 1:3:0:0)
[  545.527246] sd 1:3:0:0: [sde] Synchronizing SCSI cache
[  545.527287] sd 1:3:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00
[  545.527290] sd 1:3:0:0: [sde] Stopping disk
[  545.527304] sd 1:3:0:0: [sde] START_STOP FAILED
[  545.527306] sd 1:3:0:0: [sde] Result: hostbyte=0x04 driverbyte=0x00
[  545.527333] ata1.05: detaching (SCSI 1:5:0:0)
[  545.527451] sd 1:5:0:0: [sdf] Stopping disk
[  545.527459] sd 1:5:0:0: [sdf] START_STOP FAILED
[  545.527462] sd 1:5:0:0: [sdf] Result: hostbyte=0x04 driverbyte=0x00
[  559.279656] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xa frozen
[  559.279662] ata1: irq_stat 0x00a40080, device exchanged
[  559.279673] ata1: hard resetting link
[  563.427669] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[  563.679583] ata1.15: qc timeout (cmd 0xe4)
[  563.679589] ata1.15: failed to read PMP GSCR[0] (Emask=0x4)
[  563.679593] ata1: failed to recover some devices, retrying in 5 secs
[  568.682071] ata1: hard resetting link
[  578.687033] ata1: softreset failed (timeout)
[  578.687039] ata1: hard resetting link
[  588.691996] ata1: softreset failed (timeout)
[  588.691999] ata1: hard resetting link
[  623.681382] ata1: softreset failed (timeout)
[  623.681390] ata1: limiting SATA link speed to 1.5 Gbps
[  623.681393] ata1: hard resetting link
[  628.679864] ata1: softreset failed (timeout)
[  628.679867] ata1: reset failed, giving up
[  628.679878] ata1: exception Emask 0x10 SAct 0x0 SErr 0x40d0000 action 0xa frozen t4
[  628.679883] ata1: SError: { PHYRdyChg CommWake 10B8B DevExch }
[  628.679892] ata1: hard resetting link
[  638.684830] ata1: softreset failed (timeout)
[  638.684836] ata1: hard resetting link
[  648.689795] ata1: softreset failed (timeout)
[  648.689801] ata1: hard resetting link
[  683.679179] ata1: softreset failed (timeout)
[  683.679186] ata1: limiting SATA link speed to 1.5 Gbps
[  683.679189] ata1: hard resetting link
[  688.677661] ata1: softreset failed (timeout)
[  688.677664] ata1: reset failed, giving up
[  688.677670] ata1: EH complete
[  776.735711] ata2: exception Emask 0x10 SAct 0x0 SErr 0x10000 action 0xa frozen
[  776.735717] ata2: irq_stat 0x00a40080, device exchanged
[  776.735721] ata2: SError: { PHYRdyChg }
[  776.735731] ata2: hard resetting link
[  786.739911] ata2: softreset failed (timeout)
[  786.739918] ata2: hard resetting link
[  796.744875] ata2: softreset failed (timeout)
[  796.744881] ata2: hard resetting link
[  831.734261] ata2: softreset failed (timeout)
[  831.734268] ata2: limiting SATA link speed to 1.5 Gbps
[  831.734271] ata2: hard resetting link
[  836.732744] ata2: softreset failed (timeout)
[  836.732747] ata2: reset failed, giving up
[  836.732753] ata2: EH complete
[ 1001.096027] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
[ 1051.175431] sata_sil24 0000:00:0c.0: version 1.1
[ 1051.175576] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1051.175960] PCI: Disallowing DAC for device 0000:00:0c.0
[ 1051.176552] scsi5 : sata_sil24
[ 1051.177500] scsi6 : sata_sil24
[ 1051.178092] scsi7 : sata_sil24
[ 1051.178658] scsi8 : sata_sil24
[ 1051.178696] ata5: SATA max UDMA/100 host m128@0xfd900000 port 0xfd800000 irq 17
[ 1051.178701] ata6: SATA max UDMA/100 host m128@0xfd900000 port 0xfd802000 irq 17
[ 1051.178705] ata7: SATA max UDMA/100 host m128@0xfd900000 port 0xfd804000 irq 17
[ 1051.178709] ata8: SATA max UDMA/100 host m128@0xfd900000 port 0xfd806000 irq 17
[ 1061.180649] ata5: softreset failed (timeout)
[ 1071.185612] ata5: softreset failed (timeout)
[ 1106.174999] ata5: softreset failed (timeout)
[ 1111.173481] ata5: softreset failed (timeout)
[ 1111.173484] ata5: reset failed, giving up
[ 1116.267939] ata6: SATA link down (SStatus 1 SControl 10)
[ 1118.347308] ata7: SATA link down (SStatus 0 SControl 0)
[ 1120.426676] ata8: SATA link down (SStatus 0 SControl 0)
[ 1190.130660] ACPI: PCI interrupt for device 0000:00:0c.0 disabled
[ 1201.390201] libata version 3.00 loaded.
[ 1201.391922] sata_sil24 0000:00:0c.0: version 1.1
[ 1201.391993] ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1201.392356] PCI: Disallowing DAC for device 0000:00:0c.0
[ 1201.393728] scsi9 : sata_sil24
[ 1201.394401] scsi10 : sata_sil24
[ 1201.394980] scsi11 : sata_sil24
[ 1201.395552] scsi12 : sata_sil24
[ 1201.395590] ata1: SATA max UDMA/100 host m128@0xfd900000 port 0xfd800000 irq 17
[ 1201.395594] ata2: SATA max UDMA/100 host m128@0xfd900000 port 0xfd802000 irq 17
[ 1201.395598] ata3: SATA max UDMA/100 host m128@0xfd900000 port 0xfd804000 irq 17
[ 1201.395603] ata4: SATA max UDMA/100 host m128@0xfd900000 port 0xfd806000 irq 17
[ 1211.399074] ata1: softreset failed (timeout)
[ 1221.404038] ata1: softreset failed (timeout)
[ 1256.393425] ata1: softreset failed (timeout)
[ 1261.391906] ata1: softreset failed (timeout)
[ 1261.391910] ata1: reset failed, giving up
[ 1266.486364] ata2: SATA link down (SStatus 1 SControl 10)
[ 1268.565732] ata3: SATA link down (SStatus 0 SControl 0)
[ 1270.645101] ata4: SATA link down (SStatus 0 SControl 0)