[4194001.852669] Linux version 2.6.24-rc8-ds20 (root@chronictown) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #9 SMP Sat Jan 19 10:47:18 EST 2008
[4194001.852669] Booting on Tsunami variation Goldrush using machine vector DP264 from SRM
[4194001.852669] Major Options: SMP LEGACY_START VERBOSE_MCHECK DISCONTIGMEM MAGIC_SYSRQ 
[4194001.852669] Command line: ro root=/dev/sda3 ide=reverse
[4194001.852669] Raw memory layout:
[4194001.852669]  memcluster  0, usage 1, start        0, end      256
[4194001.852669]  memcluster  1, usage 0, start      256, end   130976
[4194001.852669]  memcluster  2, usage 1, start   130976, end   131072
[4194001.852669] Initializing bootmem allocator on Node ID 0
[4194001.852669]  memcluster  1, usage 0, start      256, end   130976
[4194001.852669]  Detected node memory:   start      258, end   130976
[4194001.852669]  freeing pages 256:384
[4194001.852669]  freeing pages 1255:130976
[4194001.852669]  reserving pages 1255:1257
[4194001.852669] 4096K Bcache detected; load hit latency 20 cycles, load miss latency 107 cycles
[4194001.852669] Console graphics on hose 0
[4194001.852669] SMP: 2 CPUs probed -- cpu_present_map = 3
[4194001.852669] On node 0 totalpages: 130976
[4194001.852669]   DMA zone: 895 pages used for memmap
[4194001.852669]   DMA zone: 0 pages reserved
[4194001.852669]   DMA zone: 130081 pages, LIFO batch:15
[4194001.852669]   Normal zone: 0 pages used for memmap
[4194001.852669]   Movable zone: 0 pages used for memmap
[4194001.852669] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130081
[4194001.852669] Kernel command line: ro root=/dev/sda3 ide=reverse
[4194001.852669] PID hash table entries: 4096 (order: 12, 32768 bytes)
[4194001.852669] Using epoch = 1952
[4194001.855599] Console: colour VGA+ 80x25
[4194001.855599] console [tty0] enabled
[4194001.860482] Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
[4194001.863412] Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
[4194001.910287] Memory: 1027192k/1045760k available (3339k kernel code, 17936k reserved, 243k data, 192k init)
[4194001.911263] Calibrating delay loop... 996.00 BogoMIPS (lpj=486400)
[4194001.929818] Mount-cache hash table entries: 512
[4194001.930794] SMP starting up secondaries.
[4194001.937630] Calibrating delay loop... 996.00 BogoMIPS (lpj=486400)
[4194001.956185] Brought up 2 CPUs
[4194001.956185] SMP: Total of 2 processors activated (1998.25 BogoMIPS).
[4194001.957162] net_namespace: 120 bytes
[4194001.958138] xor: automatically using best checksumming function: alpha prefetch
[4194001.963021]    alpha prefetch:  2064.384 MB/sec
[4194001.963021] xor: using function: alpha prefetch (2064.384 MB/sec)
[4194001.963021] NET: Registered protocol family 16
[4194001.968880] PCI: Bridge: 0000:00:08.0
[4194001.968880]   IO window: 8000-8fff
[4194001.968880]   MEM window: 09800000-098fffff
[4194001.968880]   PREFETCH window: 09900000-099fffff
[4194001.968880] SMC37c669 Super I/O Controller found @ 0x3f0
[4194001.972787] Linux Plug and Play Support v0.97 (c) Adam Belay
[4194001.974740] SCSI subsystem initialized
[4194001.974740] libata version 3.00 loaded.
[4194001.983529] NET: Registered protocol family 2
[4194001.995248] IP route cache hash table entries: 8192 (order: 3, 65536 bytes)
[4194001.996224] TCP established hash table entries: 32768 (order: 6, 524288 bytes)
[4194001.997201] TCP bind hash table entries: 32768 (order: 6, 524288 bytes)
[4194001.998177] TCP: Hash tables configured (established 32768 bind 32768)
[4194001.998177] TCP reno registered
[4194002.004037] srm_env: version 0.0.6 loaded successfully
[4194002.005990] async_tx: api initialized (sync-only)
[4194002.005990] io scheduler noop registered
[4194002.005990] io scheduler anticipatory registered (default)
[4194002.005990] io scheduler deadline registered
[4194002.005990] isapnp: Scanning for PnP cards...
[4194002.361458] isapnp: No Plug & Play device found
[4194002.479622] rtc: Digital UNIX epoch (1952) detected
[4194002.479622] Real Time Clock Driver v1.12ac
[4194002.479622] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
[4194002.480599] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4194002.480599] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4194002.482552] Floppy drive(s): fd0 is 2.88M
[4194002.499153] FDC 0 is a post-1991 82077
[4194002.501107] nbd: registered device at major 43
[4194002.505013] Loading iSCSI transport class v2.0-724.
[4194002.667122] sym0: <875> rev 0x4 at pci 0000:01:00.0 irq 27
[4194002.754036] sym0: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
[4194002.754036] sym0: open drain IRQ line driver, using on-chip SRAM
[4194002.754036] sym0: using LOAD/STORE-based firmware.
[4194002.755013] sym0: SCSI BUS has been reset.
[4194002.761849] scsi0 : sym-2.2.3
[4194002.922981] sym1: <875> rev 0x4 at pci 0000:01:01.0 irq 26
[4194003.009895] sym1: Symbios NVRAM, ID 7, Fast-20, SE, parity checking
[4194003.009895] sym1: open drain IRQ line driver, using on-chip SRAM
[4194003.009895] sym1: using LOAD/STORE-based firmware.
[4194003.010872] sym1: SCSI BUS has been reset.
[4194003.017708] scsi1 : sym-2.2.3
[4194003.017708] Driver 'sd' needs updating - please use bus_type methods
[4194003.018684] Driver 'sr' needs updating - please use bus_type methods
[4194003.018684] sata_via 0001:02:08.0: version 2.3
[4194003.019661] sata_via 0001:02:08.0: routed to hard irq line 11
[4194003.019661] scsi2 : sata_via
[4194003.019661] scsi3 : sata_via
[4194003.020638] scsi4 : sata_via
[4194003.020638] ata1: SATA max UDMA/133 port i16@0x200008820 bmdma 0x200008800 irq 43
[4194003.020638] ata2: SATA max UDMA/133 port i16@0x200008830 bmdma 0x200008808 irq 43
[4194003.021614] ata3: PATA max UDMA/133 port i16@0x200008840 bmdma 0x200008810 irq 43
[4194003.325325] ata1: SATA link down (SStatus 0 SControl 310)
[4194003.639778] ata2: SATA link down (SStatus 0 SControl 310)
[4194003.819465] serio: i8042 KBD port at 0x60,0x64 irq 1
[4194003.819465] serio: i8042 AUX port at 0x60,0x64 irq 12
[4194003.820442] mice: PS/2 mouse device common for all mice
[4194004.379035] input: AT Raw Set 2 keyboard as /class/input/input0
[4194004.398567] atkbd.c: keyboard reset failed on isa0060/serio1
[4194004.428840] md: linear personality registered for level -1
[4194004.428840] md: raid0 personality registered for level 0
[4194004.428840] md: raid1 personality registered for level 1
[4194004.430793] md: raid10 personality registered for level 10
[4194004.447395] raid6: int64x1    464 MB/s
[4194004.463996] raid6: int64x2    640 MB/s
[4194004.480598] raid6: int64x4    748 MB/s
[4194004.497199] raid6: int64x8    472 MB/s
[4194004.497199] raid6: using algorithm int64x4 (748 MB/s)
[4194004.497199] md: raid6 personality registered for level 6
[4194004.497199] md: raid5 personality registered for level 5
[4194004.497199] md: raid4 personality registered for level 4
[4194004.497199] md: multipath personality registered for level -4
[4194004.497199] md: faulty personality registered for level -5
[4194004.497199] TCP cubic registered
[4194004.499152] NET: Registered protocol family 1
[4194004.499152] NET: Registered protocol family 10
[4194004.499152] lo: Disabled Privacy Extensions
[4194004.500129] NET: Registered protocol family 17
[4194004.501106] scsi: waiting for bus probes to complete ...
[4194006.296027] scsi 1:0:1:0: Direct-Access     FUJITSU  MAJ3091MP        5508 PQ: 0 ANSI: 4
[4194006.296027]  target1:0:1: tagged command queuing enabled, command queue depth 16.
[4194006.296027]  target1:0:1: Beginning Domain Validation
[4194006.297003]  target1:0:1: asynchronous
[4194006.298956]  target1:0:1: wide asynchronous
[4194006.300909]  target1:0:1: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 16)
[4194006.301886]  target1:0:1: Domain Validation skipping write tests
[4194006.301886]  target1:0:1: Ending Domain Validation
[4194006.927862] scsi 0:0:4:0: Sequential-Access ARCHIVE  Python 04106-XXX 743B PQ: 0 ANSI: 2
[4194006.927862]  target0:0:4: Beginning Domain Validation
[4194006.932745]  target0:0:4: asynchronous
[4194006.953253]  target0:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 15)
[4194006.964972]  target0:0:4: Domain Validation skipping write tests
[4194006.964972]  target0:0:4: Ending Domain Validation
[4194009.946415] scsi 0:0:4:0: Attached scsi generic sg0 type 1
[4194010.129032] sd 1:0:1:0: [sda] 17783239 512-byte hardware sectors (9105 MB)
[4194010.131962] sd 1:0:1:0: [sda] Write Protect is off
[4194010.131962] sd 1:0:1:0: [sda] Mode Sense: ab 00 10 08
[4194010.133915] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[4194010.134892] sd 1:0:1:0: [sda] 17783239 512-byte hardware sectors (9105 MB)
[4194010.137821] sd 1:0:1:0: [sda] Write Protect is off
[4194010.137821] sd 1:0:1:0: [sda] Mode Sense: ab 00 10 08
[4194010.138798] sd 1:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[4194010.139775]  sda: sda1 sda2 sda3 sda4
[4194010.145634] sd 1:0:1:0: [sda] Attached SCSI disk
[4194010.146611] sd 1:0:1:0: Attached scsi generic sg1 type 0
[4194010.146611] md: Autodetecting RAID arrays.
[4194010.146611] md: Scanned 0 and added 0 devices.
[4194010.146611] md: autorun ...
[4194010.147587] md: ... autorun DONE.
[4194010.159306] EXT3-fs: INFO: recovery required on readonly filesystem.
[4194010.159306] EXT3-fs: write access will be enabled during recovery.
[4194017.255982] kjournald starting.  Commit interval 5 seconds
[4194017.255982] EXT3-fs: sda3: orphan cleanup on readonly fs
[4194017.255982] ext3_orphan_cleanup: deleting unreferenced inode 468352
[4194017.296021] ext3_orphan_cleanup: deleting unreferenced inode 54283
[4194017.311646] ext3_orphan_cleanup: deleting unreferenced inode 54282
[4194017.318482] ext3_orphan_cleanup: deleting unreferenced inode 54280
[4194017.326294] ext3_orphan_cleanup: deleting unreferenced inode 54274
[4194017.326294] ext3_orphan_cleanup: deleting unreferenced inode 54267
[4194017.328247] ext3_orphan_cleanup: deleting unreferenced inode 469943
[4194017.335083] ext3_orphan_cleanup: deleting unreferenced inode 48454
[4194017.341919] EXT3-fs: sda3: 8 orphan inodes deleted
[4194017.342896] EXT3-fs: recovery complete.
[4194017.367310] EXT3-fs: mounted filesystem with ordered data mode.
[4194017.367310] VFS: Mounted root (ext3 filesystem) readonly.
[4194017.368287] Freeing unused kernel memory: 192k freed
[4194020.466918] Adding 1976560k swap on /dev/sda4.  Priority:-1 extents:1 across:1976560k
[4194020.820433] EXT3 FS on sda3, internal journal
[4194022.225706] sata_sil24 0000:00:07.0: version 1.1
[4194022.229612] scsi5 : sata_sil24
[4194022.242307] scsi6 : sata_sil24
[4194022.263792] scsi7 : sata_sil24
[4194022.283323] scsi8 : sata_sil24
[4194022.295042] ata4: SATA max UDMA/100 host m128@0x9aa9000 port 0x9aa0000 irq 31
[4194022.295042] ata5: SATA max UDMA/100 host m128@0x9aa9000 port 0x9aa2000 irq 31
[4194022.295042] ata6: SATA max UDMA/100 host m128@0x9aa9000 port 0x9aa4000 irq 31
[4194022.295042] ata7: SATA max UDMA/100 host m128@0x9aa9000 port 0x9aa6000 irq 31
[4194024.462033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[4194024.462033] ata4.15: Port Multiplier 1.1, 0x1095:0x4726 r31, 7 ports, feat 0x1/0x9
[4194024.463009] ata4.00: hard resetting link
[4194024.770626] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[4194024.770626] ata4.01: hard resetting link
[4194025.078243] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[4194025.078243] ata4.02: hard resetting link
[4194025.385861] ata4.02: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[4194025.385861] ata4.03: hard resetting link
[4194025.693478] ata4.03: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[4194025.693478] ata4.04: hard resetting link
[4194026.001095] ata4.04: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[4194026.001095] ata4.05: hard resetting link
[4194026.308712] ata4.05: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
[4194026.308712] ata4.06: hard resetting link
[4194026.616329] ata4.06: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
[4194026.631954] ata4.00: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
[4194026.631954] ata4.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[4194026.632930] ata4.00: configured for UDMA/100
[4194026.639766] ata4.01: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[4194026.639766] ata4.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[4194026.640743] ata4.01: configured for UDMA/100
[4194026.650508] ata4.02: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
[4194026.651485] ata4.02: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[4194026.652461] ata4.02: configured for UDMA/100
[4194026.661251] ata4.03: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
[4194026.661251] ata4.03: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[4194026.662227] ata4.03: configured for UDMA/100
[4194026.668086] ata4.04: ATA-7: WDC WD4000AAKS-00TMA0, 12.01C01, max UDMA/133
[4194026.668086] ata4.04: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32)
[4194026.669063] ata4.04: configured for UDMA/100
[4194026.670040] ata4.05: ATA-6: Config  Disk, PLS12052, max UDMA/133
[4194026.670040] ata4.05: 640 sectors, multi 1: LBA 
[4194026.670040] ata4.05: device is on DMA blacklist, disabling DMA
[4194026.670040] ata4.05: configured for PIO4
[4194026.670040] ata4: EH complete
[4194028.721796] ata5: SATA link down (SStatus 0 SControl 0)
[4194030.772577] ata6: SATA link down (SStatus 0 SControl 0)
[4194032.822380] ata7: SATA link down (SStatus 0 SControl 0)
[4194032.822380] scsi 5:0:0:0: Direct-Access     ATA      WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
[4194032.833122] sd 5:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
[4194032.834099] sd 5:0:0:0: [sdb] Write Protect is off
[4194032.834099] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[4194032.834099] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194032.834099] sd 5:0:0:0: [sdb] 781422768 512-byte hardware sectors (400088 MB)
[4194032.835075] sd 5:0:0:0: [sdb] Write Protect is off
[4194032.835075] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[4194032.835075] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194032.835075]  sdb: sdb1
[4194032.857536] sd 5:0:0:0: [sdb] Attached SCSI disk
[4194032.884880] sd 5:0:0:0: Attached scsi generic sg2 type 0
[4194032.885857] scsi 5:1:0:0: Direct-Access     ATA      WDC WD5000AAKS-0 12.0 PQ: 0 ANSI: 5
[4194032.905388] sd 5:1:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[4194032.905388] sd 5:1:0:0: [sdc] Write Protect is off
[4194032.905388] sd 5:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[4194032.905388] sd 5:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194032.906364] sd 5:1:0:0: [sdc] 976773168 512-byte hardware sectors (500108 MB)
[4194032.906364] sd 5:1:0:0: [sdc] Write Protect is off
[4194032.906364] sd 5:1:0:0: [sdc] Mode Sense: 00 3a 00 00
[4194032.906364] sd 5:1:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194032.906364]  sdc: sdc1
[4194032.943474] sd 5:1:0:0: [sdc] Attached SCSI disk
[4194032.987419] sd 5:1:0:0: Attached scsi generic sg3 type 0
[4194032.987419] scsi 5:2:0:0: Direct-Access     ATA      WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
[4194033.068474] sd 5:2:0:0: [sdd] 781422768 512-byte hardware sectors (400088 MB)
[4194033.068474] sd 5:2:0:0: [sdd] Write Protect is off
[4194033.068474] sd 5:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[4194033.068474] sd 5:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194033.069450] sd 5:2:0:0: [sdd] 781422768 512-byte hardware sectors (400088 MB)
[4194033.069450] sd 5:2:0:0: [sdd] Write Protect is off
[4194033.069450] sd 5:2:0:0: [sdd] Mode Sense: 00 3a 00 00
[4194033.069450] sd 5:2:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194033.070427]  sdd: sdd1
[4194033.134880] sd 5:2:0:0: [sdd] Attached SCSI disk
[4194033.222771] sd 5:2:0:0: Attached scsi generic sg4 type 0
[4194033.223747] scsi 5:3:0:0: Direct-Access     ATA      WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
[4194033.274528] sd 5:3:0:0: [sde] 781422768 512-byte hardware sectors (400088 MB)
[4194033.274528] sd 5:3:0:0: [sde] Write Protect is off
[4194033.274528] sd 5:3:0:0: [sde] Mode Sense: 00 3a 00 00
[4194033.274528] sd 5:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194033.275505] sd 5:3:0:0: [sde] 781422768 512-byte hardware sectors (400088 MB)
[4194033.275505] sd 5:3:0:0: [sde] Write Protect is off
[4194033.275505] sd 5:3:0:0: [sde] Mode Sense: 00 3a 00 00
[4194033.275505] sd 5:3:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194033.276481]  sde: sde1
[4194033.333122] sd 5:3:0:0: [sde] Attached SCSI disk
[4194033.392692] sd 5:3:0:0: Attached scsi generic sg5 type 0
[4194033.393669] scsi 5:4:0:0: Direct-Access     ATA      WDC WD4000AAKS-0 12.0 PQ: 0 ANSI: 5
[4194033.449333] sd 5:4:0:0: [sdf] 781422768 512-byte hardware sectors (400088 MB)
[4194033.450310] sd 5:4:0:0: [sdf] Write Protect is off
[4194033.450310] sd 5:4:0:0: [sdf] Mode Sense: 00 3a 00 00
[4194033.450310] sd 5:4:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194033.450310] sd 5:4:0:0: [sdf] 781422768 512-byte hardware sectors (400088 MB)
[4194033.451286] sd 5:4:0:0: [sdf] Write Protect is off
[4194033.451286] sd 5:4:0:0: [sdf] Mode Sense: 00 3a 00 00
[4194033.451286] sd 5:4:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[4194033.451286]  sdf: sdf1
[4194033.516716] sd 5:4:0:0: [sdf] Attached SCSI disk
[4194033.574333] sd 5:4:0:0: Attached scsi generic sg6 type 0
[4194033.574333] scsi 5:5:0:0: Direct-Access     ATA      Config  Disk     PLS1 PQ: 0 ANSI: 5
[4194033.627067] sd 5:5:0:0: [sdg] 640 512-byte hardware sectors (0 MB)
[4194033.627067] sd 5:5:0:0: [sdg] Write Protect is off
[4194033.627067] sd 5:5:0:0: [sdg] Mode Sense: 00 3a 00 00
[4194033.627067] sd 5:5:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[4194033.628044] sd 5:5:0:0: [sdg] 640 512-byte hardware sectors (0 MB)
[4194033.628044] sd 5:5:0:0: [sdg] Write Protect is off
[4194033.628044] sd 5:5:0:0: [sdg] Mode Sense: 00 3a 00 00
[4194033.628044] sd 5:5:0:0: [sdg] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[4194033.629020]  sdg: unknown partition table
[4194033.669059] sd 5:5:0:0: [sdg] Attached SCSI disk
[4194033.732536] sd 5:5:0:0: Attached scsi generic sg7 type 0
[4194033.826286] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4194033.826286] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4194034.300895] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[4194035.301871] md: md2 stopped.
[4194035.457144] md: bind<sdf1>
[4194035.457144] md: bind<sdd1>
[4194035.458121] md: bind<sdb1>
[4194035.458121] md: bind<sdc1>
[4194035.459098] md: bind<sde1>
[4194035.477652] raid5: device sde1 operational as raid disk 0
[4194035.477652] raid5: device sdc1 operational as raid disk 4
[4194035.477652] raid5: device sdb1 operational as raid disk 3
[4194035.477652] raid5: device sdd1 operational as raid disk 2
[4194035.477652] raid5: device sdf1 operational as raid disk 1
[4194035.480582] raid5: allocated 10444kB for md2
[4194035.480582] raid5: raid level 6 set md2 active with 5 out of 5 devices, algorithm 2
[4194035.480582] RAID5 conf printout:
[4194035.480582]  --- rd:5 wd:5
[4194035.480582]  disk 0, o:1, dev:sde1
[4194035.480582]  disk 1, o:1, dev:sdf1
[4194035.480582]  disk 2, o:1, dev:sdd1
[4194035.480582]  disk 3, o:1, dev:sdb1
[4194035.480582]  disk 4, o:1, dev:sdc1
[4194039.921986] kjournald starting.  Commit interval 5 seconds
[4194039.937611] EXT3 FS on md2, internal journal
[4194039.937611] EXT3-fs: mounted filesystem with ordered data mode.
[4194041.354602] VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.14
[4194041.355579] Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
[4194041.355579] Copyright (c) 2004 Red Hat Inc.
[4194041.367298] eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
[4194041.367298] eth0: Ethernet Address: 00:13:49:12:44:DD
[4194043.787218] usbcore: registered new interface driver usbfs
[4194043.810656] usbcore: registered new interface driver hub
[4194043.827257] usbcore: registered new device driver usb
[4194043.857531] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[4194043.887804] ohci_hcd 0000:00:05.3: OHCI Host Controller
[4194043.909289] ohci_hcd 0000:00:05.3: new USB bus registered, assigned bus number 1
[4194043.909289] ohci_hcd 0000:00:05.3: irq 10, io mem 0x09aa8000
[4194044.015734] usb usb1: configuration #1 chosen from 1 choice
[4194044.027453] hub 1-0:1.0: USB hub found
[4194044.027453] hub 1-0:1.0: 2 ports detected
[4194045.468858] Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
[4194045.512803] tulip0:  EEPROM default media type Autosense.
[4194045.513780] tulip0:  Index #0 - Media MII (#11) described by a 21140 MII PHY (1) block.
[4194045.520616] tulip0:  MII transceiver #5 config 2100 status 784b advertising 01e1.
[4194045.547960] eth1: Digital DS21140 Tulip rev 34 at MMIO 0x9804000, 00:06:2b:00:d8:05, IRQ 25.
[4194047.437607] st: Version 20070203, fixed bufsize 32768, s/g segs 256
[4194047.450302] Driver 'st' needs updating - please use bus_type methods
[4194047.591904] st 0:0:4:0: Attached scsi tape st0
[4194047.591904] st 0:0:4:0: st0: try direct i/o: yes (alignment 512 B)
[4194048.758895] Velocity is AUTO mode
[4194048.768661] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4194051.797956] eth0: Link auto-negotiation speed 1000M bps full duplex
[4194051.800886] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready