From mboxrd@z Thu Jan 1 00:00:00 1970 From: Johann-Christoph Jacob Subject: Re: sata_sil24 not configuring drive right? Date: Wed, 20 Feb 2008 20:16:08 +0100 Message-ID: <47BC7C78.6050708@fhtw-berlin.de> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Return-path: Received: from mail2.rz.fhtw-berlin.de ([141.45.10.102]:65375 "EHLO mail2.rz.fhtw-berlin.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751866AbYBTUQD (ORCPT ); Wed, 20 Feb 2008 15:16:03 -0500 Received: from dslb-088-073-048-015.pools.arcor-ip.net ([88.73.48.15] helo=[192.168.0.4]) by mail2.rz.fhtw-berlin.de with esmtpsa (TLSv1:AES256-SHA:256) (Exim 4.68 (FreeBSD)) (envelope-from ) id 1JRuRF-000Lyp-3Q for linux-ide@vger.kernel.org; Wed, 20 Feb 2008 20:17:12 +0100 Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: linux-ide@vger.kernel.org Hello i do have a NCQ queue_depth of 1 too and my /sys/block/sda/device/queue_depth is not writeable. I thought i'd take the time to provide you with the hdparm output hoping this minor issue can be resolved. Yours faithfully Johann-Christoph Jacob >>From uname -a: Linux amilo 2.6.24.2 #1 SMP PREEMPT Mon Feb 11 22:01:11 CET 2008 i686 GNU/Linux >>From lspci -vvk: 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Siemens Computer GmbH Unknown device 10ad Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- >From /var/log/kern.log: ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: nr_ports (4) and implemented port map (0x5) don't match, using nr_ports ahci 0000:00:1f.2: forcing PORTS_IMPL to 0xf ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xdc444400 port 0xdc444500 irq 220 ata2: SATA max UDMA/133 abar m1024@0xdc444400 port 0xdc444580 irq 220 ata3: SATA max UDMA/133 abar m1024@0xdc444400 port 0xdc444600 irq 220 ata4: SATA max UDMA/133 abar m1024@0xdc444400 port 0xdc444680 irq 220 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: WDC WD1200BEVS-07LAT0, 01.06M01, max UDMA/133 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 1) ata1.00: configured for UDMA/133 ata2: SATA link down (SStatus 0 SControl 0) ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 0) scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-0 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.1: version 2.12 scsi4 : ata_piix scsi5 : ata_piix ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata5.00: ATAPI: Optiarc DVD RW AD-7540A, 1.42, max UDMA/33 ata5.00: configured for UDMA/33 ata6: port disabled. ignoring. scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7540A 1.42 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 >>From hdparm -I /dev/sda: /dev/sda: ATA device, with non-removable media Model Number: WDC WD1200BEVS-07LAT0 Serial Number: WD-WXE906801963 Firmware Revision: 01.06M01 Standards: Supported: 7 6 5 4 Likely used: 7 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 234441648 LBA48 user addressable sectors: 234441648 device size with M = 1024*1024: 114473 MBytes device size with M = 1000*1000: 120034 MBytes (120 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 1 Standby timer values: spec'd by Standard, with device specific minimum R/W multiple sector transfer: Max = 16 Current = 16 Advanced power management level: unknown setting (0x00fe) Recommended acoustic management value: 128, current value: 128 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE Advanced Power Management feature set * SET_MAX security extension * Automatic Acoustic Management feature set * 48-bit Address feature set * Device Configuration Overlay feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * 64-bit World wide name * IDLE_IMMEDIATE with UNLOAD * SATA-I signaling speed (1.5Gb/s) * Native Command Queueing (NCQ) * Phy event counters DMA Setup Auto-Activate optimization * Software settings preservation * SMART Command Transport (SCT) feature set * SCT Long Sector Access (AC1) * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) unknown 206[12] Security: Master password revision code = 65534 supported not enabled not locked frozen not expired: security count not supported: enhanced erase Checksum: correct