From: Daniel Schroeder <sec@dschroeder.info>
To: linux-ide@vger.kernel.org
Subject: [MCP-55] IDE problem after bios update
Date: Fri, 22 Feb 2008 20:57:54 +0100 [thread overview]
Message-ID: <47BF2942.90901@dschroeder.info> (raw)
hi there,
this is an asus m2n32-sli deluxe with nvidia chipset. After updating the
bios from 1503 to 1701 following in dmesg, and ide drive doesn't work.
Kernel is 2.6.24.2
<dmesg>
..snip...
Feb 21 22:37:02 isla-magica Uniform Multi-Platform E-IDE driver
Revision: 7.00alpha2
Feb 21 22:37:02 isla-magica ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Feb 21 22:37:02 isla-magica NFORCE-MCP55: IDE controller (0x10de:0x036e
rev 0xa1) at PCI slot 0000:00:0c.0
Feb 21 22:37:02 isla-magica NFORCE-MCP55: not 100% native mode: will
probe irqs later
Feb 21 22:37:02 isla-magica NFORCE-MCP55: 0000:00:0c.0 (rev a1) UDMA133
controller
Feb 21 22:37:02 isla-magica ide0: BM-DMA at 0xf400-0xf407, BIOS
settings: hda:DMA, hdb:DMA
Feb 21 22:37:02 isla-magica NFORCE-MCP55: IDE port disabled
Feb 21 22:37:02 isla-magica Probing IDE interface ide0...
Feb 21 22:37:02 isla-magica hda: PLEXTOR DVDR PX-740A, ATAPI CD/DVD-ROM
drive
Feb 21 22:37:02 isla-magica hda: host max PIO5 wanted PIO255(auto-tune)
selected PIO4
Feb 21 22:37:02 isla-magica hda: UDMA/33 mode selected
Feb 21 22:37:02 isla-magica ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 21 22:37:02 isla-magica hda: lost interrupt
Feb 21 22:37:02 isla-magica hda: task_in_intr: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: task_in_intr: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: 0xa1
Feb 21 22:37:02 isla-magica Probing IDE interface ide1...
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: ATAPI CD-ROM drive, 0kB Cache
Feb 21 22:37:02 isla-magica Uniform CD-ROM driver Revision: 3.20
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica hda: status error: status=0x59 { DriveReady
SeekComplete DataRequest Error }
Feb 21 22:37:02 isla-magica hda: status error: error=0x00 { }
Feb 21 22:37:02 isla-magica ide: failed opcode was: unknown
Feb 21 22:37:02 isla-magica hda: drive not ready for command
Feb 21 22:37:02 isla-magica Driver 'sd' needs updating - please use
bus_type methods
Feb 21 22:37:02 isla-magica Driver 'sr' needs updating - please use
bus_type methods
Feb 21 22:37:02 isla-magica sata_sil24 0000:02:00.0: version 1.1
...snip...
</dmesg>
tia
daniel
next reply other threads:[~2008-02-22 19:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-22 19:57 Daniel Schroeder [this message]
2008-02-22 19:58 ` [MCP-55] IDE problem after bios update Alan Cox
2008-03-10 20:08 ` Daniel Schroeder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47BF2942.90901@dschroeder.info \
--to=sec@dschroeder.info \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).