From: Daniel Schroeder <sec@dschroeder.info>
To: linux-ide@vger.kernel.org
Subject: WD1000FYPS problem
Date: Tue, 26 Feb 2008 14:54:20 +0100 [thread overview]
Message-ID: <47C41A0C.2080405@dschroeder.info> (raw)
hi there,
new WD 1TB disk, esata case, kernel-2.6.24.3, SiI 3132. Turned case
on...disk sounds strange and repetitive and this is the kern.log, two
times "strange sounds" then turned the case off.
<quote>
Feb 26 14:43:45 isla-magica ata3: exception Emask 0x10 SAct 0x0 SErr 0x0
action 0xa frozen
Feb 26 14:43:45 isla-magica ata3: irq_stat 0x00800080, device exchanged
Feb 26 14:43:45 isla-magica ata3: hard resetting link
Feb 26 14:43:55 isla-magica ata3: softreset failed (timeout)
Feb 26 14:43:55 isla-magica ata3: hard resetting link
Feb 26 14:43:58 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Feb 26 14:43:58 isla-magica ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0,
02.01B01, max UDMA/133
Feb 26 14:43:58 isla-magica ata3.00: 1953525168 sectors, multi 0: LBA48
NCQ (depth 31/32)
Feb 26 14:43:58 isla-magica ata3.00: configured for UDMA/100
Feb 26 14:43:58 isla-magica ata3: EH complete
Feb 26 14:43:58 isla-magica scsi 2:0:0:0: Direct-Access ATA WDC
WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte
hardware sectors (1000205 MB)
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte
hardware sectors (1000205 MB)
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Feb 26 14:44:04 isla-magica sdc:
Feb 26 14:44:58 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr
0x0 action 0x2 frozen
Feb 26 14:44:58 isla-magica ata3.00: cmd
60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Feb 26 14:44:58 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00
Emask 0x4 (timeout)
Feb 26 14:44:58 isla-magica ata3.00: status: { DRDY }
Feb 26 14:44:58 isla-magica ata3: hard resetting link
Feb 26 14:45:02 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Feb 26 14:45:02 isla-magica ata3.00: configured for UDMA/100
Feb 26 14:45:02 isla-magica ata3: EH complete
Feb 26 14:46:02 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr
0x0 action 0x2 frozen
Feb 26 14:46:02 isla-magica ata3.00: cmd
60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Feb 26 14:46:02 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00
Emask 0x4 (timeout)
Feb 26 14:46:02 isla-magica ata3.00: status: { DRDY }
Feb 26 14:46:02 isla-magica ata3: hard resetting link
Feb 26 14:46:05 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Feb 26 14:46:05 isla-magica ata3.00: configured for UDMA/100
Feb 26 14:46:05 isla-magica ata3: EH complete
Feb 26 14:46:10 isla-magica ata3.00: exception Emask 0x10 SAct 0x1 SErr
0x80000 action 0xa frozen
Feb 26 14:46:10 isla-magica ata3.00: irq_stat 0x01100010, PHY RDY changed
Feb 26 14:46:10 isla-magica ata3: SError: { 10B8B }
Feb 26 14:46:10 isla-magica ata3.00: cmd
60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Feb 26 14:46:10 isla-magica res 50/00:00:af:6d:70/00:00:74:00:00/e0
Emask 0x10 (ATA bus error)
Feb 26 14:46:10 isla-magica ata3.00: status: { DRDY }
Feb 26 14:46:10 isla-magica ata3: hard resetting link
Feb 26 14:46:12 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
Feb 26 14:46:12 isla-magica ata3: failed to recover some devices,
retrying in 5 secs
Feb 26 14:46:17 isla-magica ata3: hard resetting link
Feb 26 14:46:19 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
Feb 26 14:46:19 isla-magica ata3: failed to recover some devices,
retrying in 5 secs
Feb 26 14:46:24 isla-magica ata3: hard resetting link
Feb 26 14:46:26 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
Feb 26 14:46:26 isla-magica ata3.00: disabled
Feb 26 14:46:26 isla-magica ata3: EH complete
Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04
driverbyte=0x00
Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04
driverbyte=0x00
Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
Feb 26 14:46:26 isla-magica unable to read partition table
Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Attached SCSI disk
Feb 26 14:46:26 isla-magica sd 2:0:0:0: Attached scsi generic sg2 type 0
Feb 26 14:46:26 isla-magica ata_id[11248]: main: HDIO_GET_IDENTITY
failed for '/dev/.tmp-8-32'
</quote>
tia
daniel
next reply other threads:[~2008-02-26 13:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-02-26 13:54 Daniel Schroeder [this message]
2008-02-26 14:59 ` WD1000FYPS problem Daniel Schroeder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47C41A0C.2080405@dschroeder.info \
--to=sec@dschroeder.info \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).