linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Schroeder <sec@dschroeder.info>
To: linux-ide@vger.kernel.org
Subject: Re: WD1000FYPS problem
Date: Tue, 26 Feb 2008 15:59:50 +0100	[thread overview]
Message-ID: <47C42966.1040209@dschroeder.info> (raw)
In-Reply-To: <47C41A0C.2080405@dschroeder.info>

the hdd is defect, it sounds the same without a connection to the host..

cheers,
daniel

Daniel Schroeder wrote:
> hi there,
> 
> new WD 1TB disk, esata case, kernel-2.6.24.3, SiI 3132. Turned case 
> on...disk sounds strange and repetitive and this is the kern.log, two 
> times "strange sounds" then turned the case off.
> 
> <quote>
> Feb 26 14:43:45 isla-magica ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 
> action 0xa frozen
> Feb 26 14:43:45 isla-magica ata3: irq_stat 0x00800080, device exchanged
> Feb 26 14:43:45 isla-magica ata3: hard resetting link
> Feb 26 14:43:55 isla-magica ata3: softreset failed (timeout)
> Feb 26 14:43:55 isla-magica ata3: hard resetting link
> Feb 26 14:43:58 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123 
> SControl 0)
> Feb 26 14:43:58 isla-magica ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0, 
> 02.01B01, max UDMA/133
> Feb 26 14:43:58 isla-magica ata3.00: 1953525168 sectors, multi 0: LBA48 
> NCQ (depth 31/32)
> Feb 26 14:43:58 isla-magica ata3.00: configured for UDMA/100
> Feb 26 14:43:58 isla-magica ata3: EH complete
> Feb 26 14:43:58 isla-magica scsi 2:0:0:0: Direct-Access     ATA      WDC 
> WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte 
> hardware sectors (1000205 MB)
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read 
> cache: enabled, doesn't support DPO or FUA
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte 
> hardware sectors (1000205 MB)
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read 
> cache: enabled, doesn't support DPO or FUA
> Feb 26 14:44:04 isla-magica sdc:
> Feb 26 14:44:58 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr 
> 0x0 action 0x2 frozen
> Feb 26 14:44:58 isla-magica ata3.00: cmd 
> 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> Feb 26 14:44:58 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00 
> Emask 0x4 (timeout)
> Feb 26 14:44:58 isla-magica ata3.00: status: { DRDY }
> Feb 26 14:44:58 isla-magica ata3: hard resetting link
> Feb 26 14:45:02 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123 
> SControl 0)
> Feb 26 14:45:02 isla-magica ata3.00: configured for UDMA/100
> Feb 26 14:45:02 isla-magica ata3: EH complete
> Feb 26 14:46:02 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr 
> 0x0 action 0x2 frozen
> Feb 26 14:46:02 isla-magica ata3.00: cmd 
> 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> Feb 26 14:46:02 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00 
> Emask 0x4 (timeout)
> Feb 26 14:46:02 isla-magica ata3.00: status: { DRDY }
> Feb 26 14:46:02 isla-magica ata3: hard resetting link
> Feb 26 14:46:05 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123 
> SControl 0)
> Feb 26 14:46:05 isla-magica ata3.00: configured for UDMA/100
> Feb 26 14:46:05 isla-magica ata3: EH complete
> Feb 26 14:46:10 isla-magica ata3.00: exception Emask 0x10 SAct 0x1 SErr 
> 0x80000 action 0xa frozen
> Feb 26 14:46:10 isla-magica ata3.00: irq_stat 0x01100010, PHY RDY changed
> Feb 26 14:46:10 isla-magica ata3: SError: { 10B8B }
> Feb 26 14:46:10 isla-magica ata3.00: cmd 
> 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> Feb 26 14:46:10 isla-magica res 50/00:00:af:6d:70/00:00:74:00:00/e0 
> Emask 0x10 (ATA bus error)
> Feb 26 14:46:10 isla-magica ata3.00: status: { DRDY }
> Feb 26 14:46:10 isla-magica ata3: hard resetting link
> Feb 26 14:46:12 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
> Feb 26 14:46:12 isla-magica ata3: failed to recover some devices, 
> retrying in 5 secs
> Feb 26 14:46:17 isla-magica ata3: hard resetting link
> Feb 26 14:46:19 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
> Feb 26 14:46:19 isla-magica ata3: failed to recover some devices, 
> retrying in 5 secs
> Feb 26 14:46:24 isla-magica ata3: hard resetting link
> Feb 26 14:46:26 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
> Feb 26 14:46:26 isla-magica ata3.00: disabled
> Feb 26 14:46:26 isla-magica ata3: EH complete
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04 
> driverbyte=0x00
> Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
> Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04 
> driverbyte=0x00
> Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
> Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
> Feb 26 14:46:26 isla-magica unable to read partition table
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Attached SCSI disk
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: Attached scsi generic sg2 type 0
> Feb 26 14:46:26 isla-magica ata_id[11248]: main: HDIO_GET_IDENTITY 
> failed for '/dev/.tmp-8-32'
> </quote>
> 
> tia
> daniel
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


      reply	other threads:[~2008-02-26 14:59 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-02-26 13:54 WD1000FYPS problem Daniel Schroeder
2008-02-26 14:59 ` Daniel Schroeder [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47C42966.1040209@dschroeder.info \
    --to=sec@dschroeder.info \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).