* WD1000FYPS problem
@ 2008-02-26 13:54 Daniel Schroeder
2008-02-26 14:59 ` Daniel Schroeder
0 siblings, 1 reply; 2+ messages in thread
From: Daniel Schroeder @ 2008-02-26 13:54 UTC (permalink / raw)
To: linux-ide
hi there,
new WD 1TB disk, esata case, kernel-2.6.24.3, SiI 3132. Turned case
on...disk sounds strange and repetitive and this is the kern.log, two
times "strange sounds" then turned the case off.
<quote>
Feb 26 14:43:45 isla-magica ata3: exception Emask 0x10 SAct 0x0 SErr 0x0
action 0xa frozen
Feb 26 14:43:45 isla-magica ata3: irq_stat 0x00800080, device exchanged
Feb 26 14:43:45 isla-magica ata3: hard resetting link
Feb 26 14:43:55 isla-magica ata3: softreset failed (timeout)
Feb 26 14:43:55 isla-magica ata3: hard resetting link
Feb 26 14:43:58 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Feb 26 14:43:58 isla-magica ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0,
02.01B01, max UDMA/133
Feb 26 14:43:58 isla-magica ata3.00: 1953525168 sectors, multi 0: LBA48
NCQ (depth 31/32)
Feb 26 14:43:58 isla-magica ata3.00: configured for UDMA/100
Feb 26 14:43:58 isla-magica ata3: EH complete
Feb 26 14:43:58 isla-magica scsi 2:0:0:0: Direct-Access ATA WDC
WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte
hardware sectors (1000205 MB)
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte
hardware sectors (1000205 MB)
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read
cache: enabled, doesn't support DPO or FUA
Feb 26 14:44:04 isla-magica sdc:
Feb 26 14:44:58 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr
0x0 action 0x2 frozen
Feb 26 14:44:58 isla-magica ata3.00: cmd
60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Feb 26 14:44:58 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00
Emask 0x4 (timeout)
Feb 26 14:44:58 isla-magica ata3.00: status: { DRDY }
Feb 26 14:44:58 isla-magica ata3: hard resetting link
Feb 26 14:45:02 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Feb 26 14:45:02 isla-magica ata3.00: configured for UDMA/100
Feb 26 14:45:02 isla-magica ata3: EH complete
Feb 26 14:46:02 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr
0x0 action 0x2 frozen
Feb 26 14:46:02 isla-magica ata3.00: cmd
60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Feb 26 14:46:02 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00
Emask 0x4 (timeout)
Feb 26 14:46:02 isla-magica ata3.00: status: { DRDY }
Feb 26 14:46:02 isla-magica ata3: hard resetting link
Feb 26 14:46:05 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
SControl 0)
Feb 26 14:46:05 isla-magica ata3.00: configured for UDMA/100
Feb 26 14:46:05 isla-magica ata3: EH complete
Feb 26 14:46:10 isla-magica ata3.00: exception Emask 0x10 SAct 0x1 SErr
0x80000 action 0xa frozen
Feb 26 14:46:10 isla-magica ata3.00: irq_stat 0x01100010, PHY RDY changed
Feb 26 14:46:10 isla-magica ata3: SError: { 10B8B }
Feb 26 14:46:10 isla-magica ata3.00: cmd
60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
Feb 26 14:46:10 isla-magica res 50/00:00:af:6d:70/00:00:74:00:00/e0
Emask 0x10 (ATA bus error)
Feb 26 14:46:10 isla-magica ata3.00: status: { DRDY }
Feb 26 14:46:10 isla-magica ata3: hard resetting link
Feb 26 14:46:12 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
Feb 26 14:46:12 isla-magica ata3: failed to recover some devices,
retrying in 5 secs
Feb 26 14:46:17 isla-magica ata3: hard resetting link
Feb 26 14:46:19 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
Feb 26 14:46:19 isla-magica ata3: failed to recover some devices,
retrying in 5 secs
Feb 26 14:46:24 isla-magica ata3: hard resetting link
Feb 26 14:46:26 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
Feb 26 14:46:26 isla-magica ata3.00: disabled
Feb 26 14:46:26 isla-magica ata3: EH complete
Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04
driverbyte=0x00
Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04
driverbyte=0x00
Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
Feb 26 14:46:26 isla-magica unable to read partition table
Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Attached SCSI disk
Feb 26 14:46:26 isla-magica sd 2:0:0:0: Attached scsi generic sg2 type 0
Feb 26 14:46:26 isla-magica ata_id[11248]: main: HDIO_GET_IDENTITY
failed for '/dev/.tmp-8-32'
</quote>
tia
daniel
^ permalink raw reply [flat|nested] 2+ messages in thread* Re: WD1000FYPS problem
2008-02-26 13:54 WD1000FYPS problem Daniel Schroeder
@ 2008-02-26 14:59 ` Daniel Schroeder
0 siblings, 0 replies; 2+ messages in thread
From: Daniel Schroeder @ 2008-02-26 14:59 UTC (permalink / raw)
To: linux-ide
the hdd is defect, it sounds the same without a connection to the host..
cheers,
daniel
Daniel Schroeder wrote:
> hi there,
>
> new WD 1TB disk, esata case, kernel-2.6.24.3, SiI 3132. Turned case
> on...disk sounds strange and repetitive and this is the kern.log, two
> times "strange sounds" then turned the case off.
>
> <quote>
> Feb 26 14:43:45 isla-magica ata3: exception Emask 0x10 SAct 0x0 SErr 0x0
> action 0xa frozen
> Feb 26 14:43:45 isla-magica ata3: irq_stat 0x00800080, device exchanged
> Feb 26 14:43:45 isla-magica ata3: hard resetting link
> Feb 26 14:43:55 isla-magica ata3: softreset failed (timeout)
> Feb 26 14:43:55 isla-magica ata3: hard resetting link
> Feb 26 14:43:58 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
> SControl 0)
> Feb 26 14:43:58 isla-magica ata3.00: ATA-8: WDC WD1000FYPS-01ZKB0,
> 02.01B01, max UDMA/133
> Feb 26 14:43:58 isla-magica ata3.00: 1953525168 sectors, multi 0: LBA48
> NCQ (depth 31/32)
> Feb 26 14:43:58 isla-magica ata3.00: configured for UDMA/100
> Feb 26 14:43:58 isla-magica ata3: EH complete
> Feb 26 14:43:58 isla-magica scsi 2:0:0:0: Direct-Access ATA WDC
> WD1000FYPS-0 02.0 PQ: 0 ANSI: 5
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte
> hardware sectors (1000205 MB)
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read
> cache: enabled, doesn't support DPO or FUA
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] 1953525168 512-byte
> hardware sectors (1000205 MB)
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write Protect is off
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> Feb 26 14:43:58 isla-magica sd 2:0:0:0: [sdc] Write cache: enabled, read
> cache: enabled, doesn't support DPO or FUA
> Feb 26 14:44:04 isla-magica sdc:
> Feb 26 14:44:58 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr
> 0x0 action 0x2 frozen
> Feb 26 14:44:58 isla-magica ata3.00: cmd
> 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> Feb 26 14:44:58 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00
> Emask 0x4 (timeout)
> Feb 26 14:44:58 isla-magica ata3.00: status: { DRDY }
> Feb 26 14:44:58 isla-magica ata3: hard resetting link
> Feb 26 14:45:02 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
> SControl 0)
> Feb 26 14:45:02 isla-magica ata3.00: configured for UDMA/100
> Feb 26 14:45:02 isla-magica ata3: EH complete
> Feb 26 14:46:02 isla-magica ata3.00: exception Emask 0x0 SAct 0x1 SErr
> 0x0 action 0x2 frozen
> Feb 26 14:46:02 isla-magica ata3.00: cmd
> 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> Feb 26 14:46:02 isla-magica res 40/00:01:09:4f:c2/00:00:00:00:00/00
> Emask 0x4 (timeout)
> Feb 26 14:46:02 isla-magica ata3.00: status: { DRDY }
> Feb 26 14:46:02 isla-magica ata3: hard resetting link
> Feb 26 14:46:05 isla-magica ata3: SATA link up 3.0 Gbps (SStatus 123
> SControl 0)
> Feb 26 14:46:05 isla-magica ata3.00: configured for UDMA/100
> Feb 26 14:46:05 isla-magica ata3: EH complete
> Feb 26 14:46:10 isla-magica ata3.00: exception Emask 0x10 SAct 0x1 SErr
> 0x80000 action 0xa frozen
> Feb 26 14:46:10 isla-magica ata3.00: irq_stat 0x01100010, PHY RDY changed
> Feb 26 14:46:10 isla-magica ata3: SError: { 10B8B }
> Feb 26 14:46:10 isla-magica ata3.00: cmd
> 60/08:00:00:00:00/00:00:00:00:00/40 tag 0 ncq 4096 in
> Feb 26 14:46:10 isla-magica res 50/00:00:af:6d:70/00:00:74:00:00/e0
> Emask 0x10 (ATA bus error)
> Feb 26 14:46:10 isla-magica ata3.00: status: { DRDY }
> Feb 26 14:46:10 isla-magica ata3: hard resetting link
> Feb 26 14:46:12 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
> Feb 26 14:46:12 isla-magica ata3: failed to recover some devices,
> retrying in 5 secs
> Feb 26 14:46:17 isla-magica ata3: hard resetting link
> Feb 26 14:46:19 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
> Feb 26 14:46:19 isla-magica ata3: failed to recover some devices,
> retrying in 5 secs
> Feb 26 14:46:24 isla-magica ata3: hard resetting link
> Feb 26 14:46:26 isla-magica ata3: SATA link down (SStatus 0 SControl 0)
> Feb 26 14:46:26 isla-magica ata3.00: disabled
> Feb 26 14:46:26 isla-magica ata3: EH complete
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04
> driverbyte=0x00
> Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
> Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Result: hostbyte=0x04
> driverbyte=0x00
> Feb 26 14:46:26 isla-magica end_request: I/O error, dev sdc, sector 0
> Feb 26 14:46:26 isla-magica Buffer I/O error on device sdc, logical block 0
> Feb 26 14:46:26 isla-magica unable to read partition table
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: [sdc] Attached SCSI disk
> Feb 26 14:46:26 isla-magica sd 2:0:0:0: Attached scsi generic sg2 type 0
> Feb 26 14:46:26 isla-magica ata_id[11248]: main: HDIO_GET_IDENTITY
> failed for '/dev/.tmp-8-32'
> </quote>
>
> tia
> daniel
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ide" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2008-02-26 14:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-02-26 13:54 WD1000FYPS problem Daniel Schroeder
2008-02-26 14:59 ` Daniel Schroeder
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).