linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>,
	IDE/ATA development list <linux-ide@vger.kernel.org>,
	Ingo Molnar <mingo@elte.hu>
Subject: [PATCH #upstream-fixes 2/2] libata-sff: handle controllers w/o ctl register
Date: Thu, 06 Mar 2008 13:12:54 +0900	[thread overview]
Message-ID: <47CF6F46.9020908@gmail.com> (raw)
In-Reply-To: <47CF6E7E.6090201@gmail.com>

SFF incorrectly assumed that ctl register is available for all
controllers while some old SFF controllers don't have ctl register.
Make SFF handle controllers w/o ctl register by conditionalizing ctl
register access and softreset method.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
---
 drivers/ata/libata-sff.c |   36 ++++++++++++++++++++++--------------
 1 file changed, 22 insertions(+), 14 deletions(-)

Index: work/drivers/ata/libata-sff.c
===================================================================
--- work.orig/drivers/ata/libata-sff.c
+++ work/drivers/ata/libata-sff.c
@@ -56,7 +56,8 @@ u8 ata_irq_on(struct ata_port *ap)
 	ap->ctl &= ~ATA_NIEN;
 	ap->last_ctl = ap->ctl;
 
-	iowrite8(ap->ctl, ioaddr->ctl_addr);
+	if (ioaddr->ctl_addr)
+		iowrite8(ap->ctl, ioaddr->ctl_addr);
 	tmp = ata_wait_idle(ap);
 
 	ap->ops->irq_clear(ap);
@@ -81,12 +82,14 @@ void ata_tf_load(struct ata_port *ap, co
 	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
 
 	if (tf->ctl != ap->last_ctl) {
-		iowrite8(tf->ctl, ioaddr->ctl_addr);
+		if (ioaddr->ctl_addr)
+			iowrite8(tf->ctl, ioaddr->ctl_addr);
 		ap->last_ctl = tf->ctl;
 		ata_wait_idle(ap);
 	}
 
 	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		WARN_ON(!ioaddr->ctl_addr);
 		iowrite8(tf->hob_feature, ioaddr->feature_addr);
 		iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
 		iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
@@ -167,14 +170,17 @@ void ata_tf_read(struct ata_port *ap, st
 	tf->device = ioread8(ioaddr->device_addr);
 
 	if (tf->flags & ATA_TFLAG_LBA48) {
-		iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
-		tf->hob_feature = ioread8(ioaddr->error_addr);
-		tf->hob_nsect = ioread8(ioaddr->nsect_addr);
-		tf->hob_lbal = ioread8(ioaddr->lbal_addr);
-		tf->hob_lbam = ioread8(ioaddr->lbam_addr);
-		tf->hob_lbah = ioread8(ioaddr->lbah_addr);
-		iowrite8(tf->ctl, ioaddr->ctl_addr);
-		ap->last_ctl = tf->ctl;
+		if (likely(ioaddr->ctl_addr)) {
+			iowrite8(tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+			tf->hob_feature = ioread8(ioaddr->error_addr);
+			tf->hob_nsect = ioread8(ioaddr->nsect_addr);
+			tf->hob_lbal = ioread8(ioaddr->lbal_addr);
+			tf->hob_lbam = ioread8(ioaddr->lbam_addr);
+			tf->hob_lbah = ioread8(ioaddr->lbah_addr);
+			iowrite8(tf->ctl, ioaddr->ctl_addr);
+			ap->last_ctl = tf->ctl;
+		} else
+			WARN_ON(1);
 	}
 }
 
@@ -352,7 +358,8 @@ void ata_bmdma_freeze(struct ata_port *a
 	ap->ctl |= ATA_NIEN;
 	ap->last_ctl = ap->ctl;
 
-	iowrite8(ap->ctl, ioaddr->ctl_addr);
+	if (ioaddr->ctl_addr)
+		iowrite8(ap->ctl, ioaddr->ctl_addr);
 
 	/* Under certain circumstances, some controllers raise IRQ on
 	 * ATA_NIEN manipulation.  Also, many controllers fail to mask
@@ -459,13 +466,14 @@ void ata_bmdma_drive_eh(struct ata_port 
  */
 void ata_bmdma_error_handler(struct ata_port *ap)
 {
-	ata_reset_fn_t hardreset;
+	ata_reset_fn_t softreset = NULL, hardreset = NULL;
 
-	hardreset = NULL;
+	if (ap->ioaddr.ctl_addr)
+		softreset = ata_std_softreset;
 	if (sata_scr_valid(&ap->link))
 		hardreset = sata_std_hardreset;
 
-	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset, hardreset,
+	ata_bmdma_drive_eh(ap, ata_std_prereset, softreset, hardreset,
 			   ata_std_postreset);
 }
 

  reply	other threads:[~2008-03-06  4:13 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-06  4:09 [PATCH #upstream-fixes 1/2] libata: allow LLDs w/o any reset method Tejun Heo
2008-03-06  4:12 ` Tejun Heo [this message]
2008-03-06 10:25 ` Ingo Molnar
2008-03-11  0:51 ` Jeff Garzik
2008-03-11  0:53   ` Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47CF6F46.9020908@gmail.com \
    --to=htejun@gmail.com \
    --cc=jeff@garzik.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=mingo@elte.hu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).