From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>, Mark Lord <liml@rtr.ca>,
IDE/ATA development list <linux-ide@vger.kernel.org>
Subject: [PATCH #upstream 1/3] libata/pdc_adma: make SFF EH handle non-bmdma SFF drivers and standardize pdc_adma ops
Date: Tue, 25 Mar 2008 21:34:39 +0900 [thread overview]
Message-ID: <47E8F15F.50601@gmail.com> (raw)
pdc_adma has interface similar to SFF but has its own DMA interface.
It currently implements noop bmdma ops to avoid crashing
ata_bmdma_error_handler() which BTW actually is EH for SFF drivers.
This patch makes ata_bmdma_error_handler() dereference bmdma ops iff
bmdma_addr is initialized as done in ata_bmdma_post_internal_cmd.
This change allows pdc_adma to standardize ops and use SFF
error_handler and post_internal_cmd.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Mark Lord <liml@rtr.ca>
---
This patch series in on top of #cleanup-sht-ops (ed75ba53) and not for
#upstream-fixes. Tested with pdc_adma controllers Mark sent me. :-)
drivers/ata/libata-sff.c | 3 ++-
drivers/ata/pdc_adma.c | 16 ++--------------
2 files changed, 4 insertions(+), 15 deletions(-)
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 2a229a1..0e30c11 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -424,7 +424,8 @@ void ata_bmdma_error_handler(struct ata_port *ap)
ap->hsm_task_state = HSM_ST_IDLE;
- if (qc && (qc->tf.protocol == ATA_PROT_DMA ||
+ if (ap->ioaddr.bmdma_addr &&
+ qc && (qc->tf.protocol == ATA_PROT_DMA ||
qc->tf.protocol == ATAPI_PROT_DMA)) {
u8 host_stat;
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 5ed065d..577a0e5 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -136,8 +136,6 @@ static void adma_port_stop(struct ata_port *ap);
static void adma_qc_prep(struct ata_queued_cmd *qc);
static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
-static void adma_bmdma_stop(struct ata_queued_cmd *qc);
-static u8 adma_bmdma_status(struct ata_port *ap);
static void adma_freeze(struct ata_port *ap);
static void adma_thaw(struct ata_port *ap);
static int adma_prereset(struct ata_link *link, unsigned long deadline);
@@ -158,8 +156,6 @@ static struct ata_port_operations adma_ata_ops = {
.exec_command = ata_exec_command,
.data_xfer = ata_data_xfer,
.check_atapi_dma = adma_check_atapi_dma,
- .bmdma_stop = adma_bmdma_stop,
- .bmdma_status = adma_bmdma_status,
.qc_prep = adma_qc_prep,
.qc_issue = adma_qc_issue,
.irq_on = ata_irq_on,
@@ -168,6 +164,8 @@ static struct ata_port_operations adma_ata_ops = {
.thaw = adma_thaw,
.prereset = adma_prereset,
.softreset = ata_std_softreset,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
.port_start = adma_port_start,
.port_stop = adma_port_stop,
@@ -204,16 +202,6 @@ static int adma_check_atapi_dma(struct ata_queued_cmd *qc)
return 1; /* ATAPI DMA not yet supported */
}
-static void adma_bmdma_stop(struct ata_queued_cmd *qc)
-{
- /* nothing */
-}
-
-static u8 adma_bmdma_status(struct ata_port *ap)
-{
- return 0;
-}
-
static void adma_reset_engine(struct ata_port *ap)
{
void __iomem *chan = ADMA_PORT_REGS(ap);
--
1.5.2.4
next reply other threads:[~2008-03-25 12:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-25 12:34 Tejun Heo [this message]
2008-03-25 12:35 ` [PATCH 2/3] pdc_adma: inherit ata_sff_port_ops Tejun Heo
2008-03-25 12:36 ` [PATCH 3/3] pdc_adma: kill adma_host_stop() Tejun Heo
2008-04-04 7:50 ` [PATCH #upstream 1/3] libata/pdc_adma: make SFF EH handle non-bmdma SFF drivers and standardize pdc_adma ops Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47E8F15F.50601@gmail.com \
--to=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).