From: Tejun Heo <htejun@gmail.com>
To: Jeff Garzik <jeff@garzik.org>, Mark Lord <liml@rtr.ca>,
IDE/ATA development list <linux-ide@vger.kernel.org>
Subject: [PATCH #upstream 1/2] libata: kill dead code paths in reset path
Date: Tue, 08 Apr 2008 01:25:35 +0900 [thread overview]
Message-ID: <47FA4AFF.2010209@gmail.com> (raw)
Some code paths which had been made obsolete by recent reset
simplification were still around. Kill them.
* ata_eh_reset() checked for ATA_DEV_UNKNOWN to determine
classification failure. This is no longer applicable.
* ata_do_reset() should convert ATA_DEV_UNKNOWN to ATA_DEV_NONE
regardless of reset result (e.g. -EAGAIN).
* LLDs don't need to convert ATA_DEV_UNKNOWN to ATA_DEV_NONE.
Signed-off-by: Tejun Heo <htejun@gmail.com>
---
drivers/ata/libata-eh.c | 19 +------------------
drivers/ata/sata_inic162x.c | 2 --
drivers/ata/sata_sil24.c | 3 ---
3 files changed, 1 insertion(+), 23 deletions(-)
Index: work/drivers/ata/libata-eh.c
===================================================================
--- work.orig/drivers/ata/libata-eh.c
+++ work/drivers/ata/libata-eh.c
@@ -2052,15 +2052,13 @@ static int ata_do_reset(struct ata_link
classes[dev->devno] = ATA_DEV_UNKNOWN;
rc = reset(link, classes, deadline);
- if (rc)
- return rc;
/* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
ata_link_for_each_dev(dev, link)
if (classes[dev->devno] == ATA_DEV_UNKNOWN)
classes[dev->devno] = ATA_DEV_NONE;
- return 0;
+ return rc;
}
static int ata_eh_followup_srst_needed(struct ata_link *link,
@@ -2209,21 +2207,6 @@ int ata_eh_reset(struct ata_link *link,
if (rc && rc != -EAGAIN)
goto fail;
- /* was classification successful? */
- if (classify && classes[0] == ATA_DEV_UNKNOWN &&
- !(lflags & ATA_LFLAG_ASSUME_CLASS)) {
- if (try < max_tries) {
- ata_link_printk(link, KERN_WARNING,
- "classification failed\n");
- rc = -EINVAL;
- goto fail;
- }
-
- ata_link_printk(link, KERN_WARNING,
- "classfication failed, assuming ATA\n");
- lflags |= ATA_LFLAG_ASSUME_ATA;
- }
-
done:
ata_link_for_each_dev(dev, link) {
/* After the reset, the device state is PIO 0 and the
Index: work/drivers/ata/sata_inic162x.c
===================================================================
--- work.orig/drivers/ata/sata_inic162x.c
+++ work/drivers/ata/sata_inic162x.c
@@ -428,8 +428,6 @@ static int inic_hardreset(struct ata_lin
ata_sff_tf_read(ap, &tf);
*class = ata_dev_classify(&tf);
- if (*class == ATA_DEV_UNKNOWN)
- *class = ATA_DEV_NONE;
}
return 0;
Index: work/drivers/ata/sata_sil24.c
===================================================================
--- work.orig/drivers/ata/sata_sil24.c
+++ work/drivers/ata/sata_sil24.c
@@ -693,9 +693,6 @@ static int sil24_softreset(struct ata_li
sil24_read_tf(ap, 0, &tf);
*class = ata_dev_classify(&tf);
- if (*class == ATA_DEV_UNKNOWN)
- *class = ATA_DEV_NONE;
-
out:
DPRINTK("EXIT, class=%u\n", *class);
return 0;
next reply other threads:[~2008-04-07 16:25 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-07 16:25 Tejun Heo [this message]
2008-04-07 16:46 ` [PATCH #upstream 2/2] libata: move link onlineness check out of softreset methods Tejun Heo
2008-04-12 4:35 ` [PATCH #upstream 1/2] libata: kill dead code paths in reset path Jeff Garzik
2008-04-13 16:27 ` Mark Lord
2008-04-14 20:52 ` sata_mv & pmp support Mark Lord
2008-04-15 2:01 ` Tejun Heo
2008-04-15 14:03 ` Mark Lord
2008-04-15 14:04 ` Mark Lord
[not found] ` <4803C850.9010901@rtr.ca>
2008-04-15 2:07 ` Tejun Heo
2008-04-15 19:59 ` Mark Lord
2008-04-15 20:14 ` Mark Lord
2008-04-15 22:36 ` Tejun Heo
2008-04-15 22:53 ` Mark Lord
2008-04-16 2:03 ` Mark Lord
2008-04-16 2:10 ` Tejun Heo
2008-04-16 7:05 ` Gwendal Grignou
2008-04-16 12:43 ` Mark Lord
2008-04-16 12:37 ` Mark Lord
2008-04-16 12:45 ` Mark Lord
2008-04-16 15:41 ` Mark Lord
2008-04-16 22:19 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47FA4AFF.2010209@gmail.com \
--to=htejun@gmail.com \
--cc=jeff@garzik.org \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).