From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Garzik Subject: Re: [patch 1/2] pata_atiixp: simplex clear Date: Sat, 12 Apr 2008 00:33:21 -0400 Message-ID: <48003B91.4070701@garzik.org> References: <200803282133.m2SLXupx011467@imap1.linux-foundation.org> Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from srv5.dvmed.net ([207.36.208.214]:33823 "EHLO mail.dvmed.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751039AbYDLEdZ (ORCPT ); Sat, 12 Apr 2008 00:33:25 -0400 In-Reply-To: <200803282133.m2SLXupx011467@imap1.linux-foundation.org> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: akpm@linux-foundation.org Cc: linux-ide@vger.kernel.org, alan@lxorguk.ukuu.org.uk, alan@redhat.com, Tejun Heo akpm@linux-foundation.org wrote: > From: Alan Cox > > Some of the other quirks changes seem to have left some users with the simplex > bits mis-set by the time the driver loads. Clear simplex mode before we probe > the controller therefore. > > Signed-off-by: Alan Cox > Cc: Jeff Garzik > Signed-off-by: Andrew Morton > --- > > drivers/ata/pata_atiixp.c | 7 +++++-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff -puN drivers/ata/pata_atiixp.c~pata_atiixp-simplex-clear drivers/ata/pata_atiixp.c > --- a/drivers/ata/pata_atiixp.c~pata_atiixp-simplex-clear > +++ a/drivers/ata/pata_atiixp.c > @@ -22,7 +22,7 @@ > #include > > #define DRV_NAME "pata_atiixp" > -#define DRV_VERSION "0.4.6" > +#define DRV_VERSION "0.4.7" > > enum { > ATIIXP_IDE_PIO_TIMING = 0x40, > @@ -243,6 +243,9 @@ static int atiixp_init_one(struct pci_de > .port_ops = &atiixp_port_ops > }; > const struct ata_port_info *ppi[] = { &info, NULL }; > + /* Some of the quirk reconfiguration messes up the simplex > + flag, so clear it again */ > + ata_pci_clear_simplex(dev); > return ata_pci_init_one(dev, ppi, &atiixp_sht, NULL); > } > > @@ -279,7 +282,7 @@ static void __exit atiixp_exit(void) > } > > MODULE_AUTHOR("Alan Cox"); > -MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400"); > +MODULE_DESCRIPTION("low-level driver for ATI IXP series"); > MODULE_LICENSE("GPL"); > MODULE_DEVICE_TABLE(pci, atiixp); Since I saw some automated akpm mail about this... this patch is obsolete. Needs ata_pci_bmdma_clear_simplex() at least. Also, Tejun, you had some thoughts on this? In current #upstream, we still call ata_pci_bmdma_clear_simplex() before pcim_enable_device() in some cases, so the problem remains... Jeff