linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Re: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
       [not found] <1209002065.17082.30.camel@corfu>
@ 2008-04-24  2:49 ` Tejun Heo
       [not found]   ` <1209060137.21811.6.camel@corfu>
  0 siblings, 1 reply; 4+ messages in thread
From: Tejun Heo @ 2008-04-24  2:49 UTC (permalink / raw)
  To: Guenther Thomsen; +Cc: kernel, IDE/ATA development list

Guenther Thomsen wrote:
> Not sure, if this issue has been resolved meanwhile. The thread I found 
> indicated only that it is believed to be an interrupt routing issue.
> 
> I ran into this issue, when upgrading Ubuntu from 7.10 (kernel 
> 2.6.22-14) to 8.04rc (kernel 2.6.24-16) and added my findings to bug 
> 219312 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/219312) .
> 
> --8<--
> [ 56.463297] SCSI subsystem initialized
> [ 56.477843] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 21 (level, low) 
> -> IRQ 21
> [ 56.478127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
> [ 56.478178] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
> [...]
> [ 57.480373] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3Gbps 
> 0xf impl SATA mode
> [ 57.480427] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum 
> part
> [ 57.481394] scsi0 : ahci
> [ 57.481710] scsi1 : ahci
> [ 57.481873] scsi2 : ahci
> [ 57.482040] scsi3 : ahci
> [ 57.955539] ata1: SATA link up 1.5Gbps (SStatus 113 SControl 300)
> [ 87.904552] ata1.00: qc timeout (cmd 0xec)
> [ 87.904608] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> [ 87.904653] ata1: failed to recover some devices, retrying in 5 secs
> -->8--
> 
> A "pci=nomsi" got this kernel on its feet again, but if there is still 
> interest in kernel messages or other traces, then please let me know.

Can you please attach full boot log and the result of "lspci -nn"?

-- 
tejun

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
       [not found]   ` <1209060137.21811.6.camel@corfu>
@ 2008-04-24 21:38     ` Tejun Heo
  2008-04-25  1:03       ` Huang, Shane
  0 siblings, 1 reply; 4+ messages in thread
From: Tejun Heo @ 2008-04-24 21:38 UTC (permalink / raw)
  To: Guenther Thomsen; +Cc: kernel, IDE/ATA development list, Shane Huang

Guenther Thomsen wrote:
> On Thu, 2008-04-24 at 11:49 +0900, Tejun Heo wrote:
>> Guenther Thomsen wrote:
>> > Not sure, if this issue has been resolved meanwhile. The thread I found 
>> > indicated only that it is believed to be an interrupt routing issue.
>> > 
>> > I ran into this issue, when upgrading Ubuntu from 7.10 (kernel 
>> > 2.6.22-14) to 8.04rc (kernel 2.6.24-16) and added my findings to bug 
>> > 219312 (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/219312) .
>> > 
>> > --8<--
>> > [ 56.463297] SCSI subsystem initialized
>> > [ 56.477843] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 21 (level, low) 
>> > -> IRQ 21
>> > [ 56.478127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
>> > [ 56.478178] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP
>> > [...]
>> > [ 57.480373] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3Gbps 
>> > 0xf impl SATA mode
>> > [ 57.480427] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum 
>> > part
>> > [ 57.481394] scsi0 : ahci
>> > [ 57.481710] scsi1 : ahci
>> > [ 57.481873] scsi2 : ahci
>> > [ 57.482040] scsi3 : ahci
>> > [ 57.955539] ata1: SATA link up 1.5Gbps (SStatus 113 SControl 300)
>> > [ 87.904552] ata1.00: qc timeout (cmd 0xec)
>> > [ 87.904608] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>> > [ 87.904653] ata1: failed to recover some devices, retrying in 5 secs
>> > -->8--
>> > 
>> > A "pci=nomsi" got this kernel on its feet again, but if there is still 
>> > interest in kernel messages or other traces, then please let me know.
>>
>> Can you please attach full boot log and the result of "lspci -nn"?
>>
> Attached (please ignore the OOM killer towards the end - there is still 
> some Gnome badness in Ubuntu 8.04rc).

Shane can you please advise on this?  How did your previous
investigation go?  We need to blacklist it one way or the other.

Thanks.

00:00.0 Host bridge [0600]: ATI Technologies Inc RD580 [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952]
00:02.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI-X Root Port [1002:5a34]
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 13)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV530 [Radeon X1600] [1002:71c2]
01:00.1 Display controller [0380]: ATI Technologies Inc RV530 [Radeon X1600] (Secondary) [1002:71e2]
02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363 AHCI Controller [197b:2360] (rev 02)
03:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. IEEE 1394 Host Controller [1106:3044] (rev c0)
03:04.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)

-- 
tejun

^ permalink raw reply	[flat|nested] 4+ messages in thread

* RE: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
  2008-04-24 21:38     ` Tejun Heo
@ 2008-04-25  1:03       ` Huang, Shane
  2008-04-25  1:51         ` Tejun Heo
  0 siblings, 1 reply; 4+ messages in thread
From: Huang, Shane @ 2008-04-25  1:03 UTC (permalink / raw)
  To: Tejun Heo, Guenther Thomsen
  Cc: kernel, IDE/ATA development list, Zhao, Richard, Huang, Shane

Tejun:

I added one patch link to that bugzilla and need Yann's verification.


Thanks
Shane


> -----Original Message-----
> From: Tejun Heo [mailto:htejun@gmail.com] 
> Sent: Friday, April 25, 2008 5:39 AM
> To: Guenther Thomsen
> Cc: kernel@vger.kernel.org; IDE/ATA development list; Huang, Shane
> Subject: Re: Regression: kernel 2.6.24 ahci problem, does not 
> boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
> 
> Guenther Thomsen wrote:
> > On Thu, 2008-04-24 at 11:49 +0900, Tejun Heo wrote:
> >> Guenther Thomsen wrote:
> >> > Not sure, if this issue has been resolved meanwhile. The 
> thread I found 
> >> > indicated only that it is believed to be an interrupt 
> routing issue.
> >> > 
> >> > I ran into this issue, when upgrading Ubuntu from 7.10 (kernel 
> >> > 2.6.22-14) to 8.04rc (kernel 2.6.24-16) and added my 
> findings to bug 
> >> > 219312 
> (https://bugs.launchpad.net/ubuntu/+source/linux/+bug/219312) .
> >> > 
> >> > --8<--
> >> > [ 56.463297] SCSI subsystem initialized
> >> > [ 56.477843] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 
> 21 (level, low) 
> >> > -> IRQ 21
> >> > [ 56.478127] ahci 0000:00:12.0: controller can't do 
> 64bit DMA, forcing 32bit
> >> > [ 56.478178] ahci 0000:00:12.0: controller can't do PMP, 
> turning off CAP_PMP
> >> > [...]
> >> > [ 57.480373] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 
> 4 ports 3Gbps 
> >> > 0xf impl SATA mode
> >> > [ 57.480427] ahci 0000:00:12.0: flags: ncq sntf ilck pm 
> led clo pio slum 
> >> > part
> >> > [ 57.481394] scsi0 : ahci
> >> > [ 57.481710] scsi1 : ahci
> >> > [ 57.481873] scsi2 : ahci
> >> > [ 57.482040] scsi3 : ahci
> >> > [ 57.955539] ata1: SATA link up 1.5Gbps (SStatus 113 
> SControl 300)
> >> > [ 87.904552] ata1.00: qc timeout (cmd 0xec)
> >> > [ 87.904608] ata1.00: failed to IDENTIFY (I/O error, 
> err_mask=0x4)
> >> > [ 87.904653] ata1: failed to recover some devices, 
> retrying in 5 secs
> >> > -->8--
> >> > 
> >> > A "pci=nomsi" got this kernel on its feet again, but if 
> there is still 
> >> > interest in kernel messages or other traces, then please 
> let me know.
> >>
> >> Can you please attach full boot log and the result of "lspci -nn"?
> >>
> > Attached (please ignore the OOM killer towards the end - 
> there is still 
> > some Gnome badness in Ubuntu 8.04rc).
> 
> Shane can you please advise on this?  How did your previous
> investigation go?  We need to blacklist it one way or the other.
> 
> Thanks.
> 
> 00:00.0 Host bridge [0600]: ATI Technologies Inc RD580 
> [CrossFire Xpress 3200] Chipset Host Bridge [1002:5952]
> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI-X 
> Root Port [1002:5a34]
> 00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI 
> Bridge [1002:5a37]
> 00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 
> Non-Raid-5 SATA [1002:4380]
> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB 
> (OHCI0) [1002:4387]
> 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB 
> (OHCI1) [1002:4388]
> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB 
> (OHCI2) [1002:4389]
> 00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB 
> (OHCI3) [1002:438a]
> 00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB 
> (OHCI4) [1002:438b]
> 00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB 
> Controller (EHCI) [1002:4386]
> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus 
> Controller [1002:4385] (rev 13)
> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE 
> [1002:438c]
> 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 
> Azalia [1002:4383]
> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to 
> LPC Bridge [1002:438d]
> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to 
> PCI Bridge [1002:4384]
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] Address Map [1022:1101]
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] DRAM Controller [1022:1102]
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 
> [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> 01:00.0 VGA compatible controller [0300]: ATI Technologies 
> Inc RV530 [Radeon X1600] [1002:71c2]
> 01:00.1 Display controller [0380]: ATI Technologies Inc RV530 
> [Radeon X1600] (Secondary) [1002:71e2]
> 02:00.0 SATA controller [0106]: JMicron Technologies, Inc. 
> JMicron 20360/20363 AHCI Controller [197b:2360] (rev 02)
> 03:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. 
> IEEE 1394 Host Controller [1106:3044] (rev c0)
> 03:04.0 Ethernet controller [0200]: Marvell Technology Group 
> Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
> 
> -- 
> tejun
> 
> 


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY)
  2008-04-25  1:03       ` Huang, Shane
@ 2008-04-25  1:51         ` Tejun Heo
  0 siblings, 0 replies; 4+ messages in thread
From: Tejun Heo @ 2008-04-25  1:51 UTC (permalink / raw)
  To: Huang, Shane
  Cc: Guenther Thomsen, kernel, IDE/ATA development list, Zhao, Richard

Huang, Shane wrote:
> Tejun:
> 
> I added one patch link to that bugzilla and need Yann's verification.

Heh... Can you please give me the link?  I can't find it at the moment.

Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2008-04-25  1:51 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
     [not found] <1209002065.17082.30.camel@corfu>
2008-04-24  2:49 ` Regression: kernel 2.6.24 ahci problem, does not boot (doesn't find SATA disk, i.e. failed to IDENTIFY) Tejun Heo
     [not found]   ` <1209060137.21811.6.camel@corfu>
2008-04-24 21:38     ` Tejun Heo
2008-04-25  1:03       ` Huang, Shane
2008-04-25  1:51         ` Tejun Heo

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).