From: Mark Lord <liml@rtr.ca>
To: Jeff Garzik <jgarzik@pobox.com>, Tejun Heo <htejun@gmail.com>,
IDE/ATA development list <linux-ide@vger.kernel.org>
Subject: [PATCH 11/12] sata_mv delayed eh handling
Date: Fri, 02 May 2008 02:15:37 -0400 [thread overview]
Message-ID: <481AB189.3070705@rtr.ca> (raw)
In-Reply-To: <481AB15D.5020201@rtr.ca>
Introduce a new "delayed error handling" mechanism in sata_mv,
to enable us to eventually deal with multiple simultaneous NCQ
failures on a single host link when a PM is present.
This involves a port flag (MV_PP_FLAG_DELAYED_EH) to prevent new
commands being queued, and a pmp bitmap to indicate which pmp links
had NCQ errors.
The new mv_pmp_error_handler() uses those values to invoke
ata_eh_analyze_ncq_error() on each failed link, prior to freezing
the port and passing control to sata_pmp_error_handler().
This is based upon a strategy suggested by Tejun.
For now, we just implement the delayed mechanism.
The next patch in this series will add the multiple-NCQ EH code
to take advantage of it.
Signed-off-by: Mark Lord <mlord@pobox.com>
--- old/drivers/ata/sata_mv.c 2008-05-01 18:43:49.000000000 -0400
+++ linux/drivers/ata/sata_mv.c 2008-05-01 18:55:23.000000000 -0400
@@ -367,6 +367,7 @@
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */
MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */
+ MV_PP_FLAG_DELAYED_EH = (1 << 3), /* delayed dev err handling */
};
#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
@@ -447,6 +448,7 @@
unsigned int resp_idx;
u32 pp_flags;
+ unsigned int delayed_eh_pmp_map;
};
struct mv_port_signal {
@@ -542,6 +544,7 @@
unsigned long deadline);
static int mv_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
+static void mv_pmp_error_handler(struct ata_port *ap);
/* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
* because we have to allow room for worst case splitting of
@@ -589,7 +592,7 @@
.pmp_hardreset = mv_pmp_hardreset,
.pmp_softreset = mv_softreset,
.softreset = mv_softreset,
- .error_handler = sata_pmp_error_handler,
+ .error_handler = mv_pmp_error_handler,
};
static struct ata_port_operations mv_iie_ops = {
@@ -1098,6 +1101,12 @@
struct mv_port_priv *pp = ap->private_data;
/*
+ * Don't allow new commands if we're in a delayed EH state
+ * for NCQ and/or FIS-based switching.
+ */
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH)
+ return ATA_DEFER_PORT;
+ /*
* If the port is completely idle, then allow the new qc.
*/
if (ap->nr_active_links == 0)
@@ -1591,6 +1600,33 @@
return qc;
}
+static void mv_pmp_error_handler(struct ata_port *ap)
+{
+ unsigned int pmp, pmp_map;
+ struct mv_port_priv *pp = ap->private_data;
+
+ if (pp->pp_flags & MV_PP_FLAG_DELAYED_EH) {
+ /*
+ * Perform NCQ error analysis on failed PMPs
+ * before we freeze the port entirely.
+ *
+ * The failed PMPs are marked earlier by mv_pmp_eh_prep().
+ */
+ pmp_map = pp->delayed_eh_pmp_map;
+ pp->pp_flags &= ~MV_PP_FLAG_DELAYED_EH;
+ for (pmp = 0; pmp_map != 0; pmp++) {
+ unsigned int this_pmp = (1 << pmp);
+ if (pmp_map & this_pmp) {
+ struct ata_link *link = &ap->pmp_link[pmp];
+ pmp_map &= ~this_pmp;
+ ata_eh_analyze_ncq_error(link);
+ }
+ }
+ ata_port_freeze(ap);
+ }
+ sata_pmp_error_handler(ap);
+}
+
static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
{
struct ata_eh_info *ehi = &ap->link.eh_info;
next prev parent reply other threads:[~2008-05-02 6:15 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-02 6:07 [PATCH 00/12] sata_mv: The last big set for 2.6.26 Mark Lord
2008-05-02 6:07 ` [PATCH 01/12] sata_mv more cosmetic changes Mark Lord
2008-05-02 6:08 ` [PATCH 02/12] sata_mv pci features Mark Lord
2008-05-02 6:09 ` [PATCH 03/12] sata_mv wait for empty+idle Mark Lord
2008-05-02 6:10 ` [PATCH 04/12] sata_mv new mv_qc_defer method Mark Lord
2008-05-02 6:10 ` [PATCH 05/12] sata_mv errata workaround for sata25 part 1 Mark Lord
2008-05-02 6:11 ` [PATCH 06/12] sata_mv rearrange mv_config_fbs Mark Lord
2008-05-02 6:12 ` [PATCH 07/12] sata_mv NCQ and SError fixes for mv_err_intr Mark Lord
2008-05-02 6:13 ` [PATCH 08/12] sata_mv fix mv_host_intr bug for hc_irq_cause Mark Lord
2008-05-02 6:14 ` [PATCH 09/12] sata_mv new mv_port_intr function Mark Lord
2008-05-02 6:14 ` [PATCH 10/12] sata_mv libata: export ata_eh_analyze_ncq_error Mark Lord
2008-05-02 6:15 ` Mark Lord [this message]
2008-05-02 6:16 ` [PATCH 12/12] sata_mv NCQ-EH for FIS-based switching Mark Lord
2008-05-02 12:44 ` Mark Lord
2008-05-02 16:52 ` Grant Grundler
2008-05-02 16:54 ` Grant Grundler
2008-05-02 17:46 ` Mark Lord
2008-05-02 17:52 ` Alan Cox
2008-05-02 17:56 ` [PATCH 13/13] sata_mv use hweight16() for bit counting Mark Lord
2008-05-02 18:02 ` Mark Lord
2008-05-02 18:02 ` [PATCH 13/13] sata_mv use hweight16() for bit counting (V2) Mark Lord
2008-05-02 18:31 ` Grant Grundler
2008-05-02 16:42 ` [PATCH 03/12] sata_mv wait for empty+idle Grant Grundler
2008-05-02 17:45 ` Mark Lord
2008-05-02 18:39 ` Grant Grundler
2008-05-02 20:09 ` Mark Lord
2008-05-02 16:06 ` [PATCH 02/12] sata_mv pci features Grant Grundler
2008-05-02 17:41 ` Mark Lord
2008-05-02 18:28 ` Grant Grundler
2008-05-06 14:10 ` [PATCH 01/12] sata_mv more cosmetic changes Jeff Garzik
2008-05-06 17:57 ` Mark Lord
2008-05-06 14:17 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=481AB189.3070705@rtr.ca \
--to=liml@rtr.ca \
--cc=htejun@gmail.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).