* Re: SW-IOMMU / ata_piix errors with 2.6.27-rc1
[not found] <fa.64b92XSd5HpCdpOYcDENnJSZJyw@ifi.uio.no>
@ 2008-08-03 20:30 ` Robert Hancock
2008-08-04 0:40 ` Juergen Kreileder
0 siblings, 1 reply; 5+ messages in thread
From: Robert Hancock @ 2008-08-03 20:30 UTC (permalink / raw)
To: Juergen Kreileder; +Cc: linux-kernel, linux-ide
Juergen Kreileder wrote:
> Hi,
>
> I get lots of errors like this with 2.6.27-rc1 on my
> Macbook Pro (3rd generation), 2.6.26 seems to work fine:
>
> [ 907.524509] DMA: Out of SW-IOMMU space for 45056 bytes at device 0000:00:1f.2
> [ 907.524783] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
> [ 907.524796] ata3.00: cmd 35/00:50:08:91:5c/00:01:0f:00:00/e0 tag 0 dma 172032 out
> [ 907.524798] res 50/00:00:ff:90:5c/00:00:0f:00:00/ef Emask 0x40 (internal error)
> [ 907.524805] ata3.00: status: { DRDY }
> [ 907.646590] ata3.00: configured for UDMA/133
> [ 907.646624] ata3: EH complete
> [ 907.647028] DMA: Out of SW-IOMMU space for 45056 bytes at device 0000:00:1f.2
> [ 907.647139] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
> [ 907.647161] ata3.00: cmd 35/00:50:08:91:5c/00:01:0f:00:00/e0 tag 0 dma 172032 out
> [ 907.647166] res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x40 (internal error)
> [ 907.647178] ata3.00: status: { DRDY }
> [ 907.693193] ata3.00: configured for UDMA/133
> [ 907.693225] ata3: EH complete
> [ 907.693629] DMA: Out of SW-IOMMU space for 45056 bytes at device 0000:00:1f.2
> [ 907.693684] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
> [ 907.693696] ata3.00: cmd 35/00:50:08:91:5c/00:01:0f:00:00/e0 tag 0 dma 172032 out
> [ 907.693698] res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x40 (internal error)
> [ 907.693784] ata3.00: status: { DRDY }
> [ 907.739868] ata3.00: configured for UDMA/133
> [ 907.739899] ata3: EH complete
> [ 907.740255] DMA: Out of SW-IOMMU space for 45056 bytes at device 0000:00:1f.2
> [ 907.740255] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
> [ 907.740389] ata3.00: cmd 35/00:50:08:91:5c/00:01:0f:00:00/e0 tag 0 dma 172032 out
> [ 907.740394] res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x40 (internal error)
> [ 907.740406] ata3.00: status: { DRDY }
> [ 907.785818] ata3.00: configured for UDMA/133
> [ 907.785850] ata3: EH complete
> [ 907.786124] DMA: Out of SW-IOMMU space for 45056 bytes at device 0000:00:1f.2
> [ 907.786206] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
> [ 907.786230] ata3.00: cmd 35/00:50:08:91:5c/00:01:0f:00:00/e0 tag 0 dma 172032 out
> [ 907.786235] res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x40 (internal error)
> [ 907.786249] ata3.00: status: { DRDY }
> [ 907.831742] ata3.00: configured for UDMA/133
> [ 907.831774] ata3: EH complete
> [ 907.832087] DMA: Out of SW-IOMMU space for 45056 bytes at device 0000:00:1f.2
> [ 907.832163] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
> [ 907.832186] ata3.00: cmd 35/00:50:08:91:5c/00:01:0f:00:00/e0 tag 0 dma 172032 out
> [ 907.832191] res 50/00:00:af:ea:42/00:00:25:00:00/e0 Emask 0x40 (internal error)
> [ 907.832284] ata3.00: status: { DRDY }
> [ 907.877603] ata3.00: configured for UDMA/133
> [ 907.877646] sd 2:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
> [ 907.877654] sd 2:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
> [ 907.877664] Descriptor sense data with sense descriptors (in hex):
> [ 907.877668] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00
> [ 907.877688] 25 42 ea af
> [ 907.877696] sd 2:0:0:0: [sda] Add. Sense: No additional sense information
> [ 907.877704] end_request: I/O error, dev sda, sector 257724680
> [ 907.877714] Buffer I/O error on device sda3, logical block 7728326
> [ 907.877718] lost page write due to I/O error on sda3
> [ 907.877727] Buffer I/O error on device sda3, logical block 7728327
> [ 907.877731] lost page write due to I/O error on sda3
> [ 907.877737] Buffer I/O error on device sda3, logical block 7728328
> [ 907.877741] lost page write due to I/O error on sda3
> [ 907.877747] Buffer I/O error on device sda3, logical block 7728329
> [ 907.877751] lost page write due to I/O error on sda3
> [ 907.877757] Buffer I/O error on device sda3, logical block 7728330
> [ 907.877762] lost page write due to I/O error on sda3
> [ 907.877767] Buffer I/O error on device sda3, logical block 7728331
> [ 907.877771] lost page write due to I/O error on sda3
> [ 907.877777] Buffer I/O error on device sda3, logical block 7728332
> [ 907.877781] lost page write due to I/O error on sda3
> [ 907.877787] Buffer I/O error on device sda3, logical block 7728333
> [ 907.877791] lost page write due to I/O error on sda3
> [ 907.877797] Buffer I/O error on device sda3, logical block 7728334
> [ 907.877801] lost page write due to I/O error on sda3
> [ 907.877864] ata3: EH complete
> [ 907.878318] DMA: Out of SW-IOMMU space for 36864 bytes at device 0000:00:1f.2
> ..
> ..
> ..
>
> I'm running an x86-64 kernel and the machine has 4GB.
>
> [ 2.819749] ata_piix 0000:00:1f.1: version 2.12
> [ 2.819811] ata_piix 0000:00:1f.1: power state changed by ACPI to D0
> [ 2.819816] ata_piix 0000:00:1f.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
> [ 2.819850] ata_piix 0000:00:1f.1: setting latency timer to 64
> [ 2.819941] scsi0 : ata_piix
> [ 2.820165] scsi1 : ata_piix
> [ 2.820621] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x60e0 irq 14
> [ 2.820623] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x60e8 irq 15
> [ 2.975131] ata1.00: ATAPI: MATSHITADVD-R UJ-857E, ZA0E, max UDMA/66
> [ 2.981027] ata1.00: configured for UDMA/66
> [ 3.155025] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857E ZA0E PQ: 0 ANSI: 5
> [ 3.155025] ata_piix 0000:00:1f.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18
> [ 3.155025] ata_piix 0000:00:1f.2: MAP [ P0 -- -- -- ]
> [ 3.155025] ata_piix 0000:00:1f.2: setting latency timer to 64
> [ 3.171708] scsi2 : ata_piix
> [ 3.183270] scsi3 : ata_piix
> [ 3.184051] ata3: SATA max UDMA/133 cmd 0x60f8 ctl 0x6114 bmdma 0x6020 irq 18
> [ 3.184053] ata4: SATA max UDMA/133 cmd 0x60f0 ctl 0x6110 bmdma 0x6028 irq 18
> [ 3.355353] ata3.00: ATA-8: SAMSUNG HM320JI, 2SS00_01, max UDMA7
> [ 3.355358] ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 3.379686] ata3.00: configured for UDMA/133
> [ 3.563969] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HM320JI 2SS0 PQ: 0 ANSI: 5
> [ 3.576523] scsi 0:0:0:0: Attached scsi generic sg0 type 5
> [ 3.576555] scsi 2:0:0:0: Attached scsi generic sg1 type 0
> [ 3.578422] Driver 'sd' needs updating - please use bus_type methods
> [ 3.578503] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> [ 3.578521] sd 2:0:0:0: [sda] Write Protect is off
> [ 3.578522] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.578550] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 3.578625] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> [ 3.578643] sd 2:0:0:0: [sda] Write Protect is off
> [ 3.578644] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 3.578678] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 3.578680] sda:<6>usb 7-1: configuration #1 chosen from 1 choice
> [ 4.174973] sda1 sda2 sda3 sda4 sda5
> [ 4.175168] sd 2:0:0:0: [sda] Attached SCSI disk
>
>
> 00:1f.2 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA IDE Controller (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Apple Computer Inc. Device 00a0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin B routed to IRQ 18
> Region 0: I/O ports at 60f8 [size=8]
> Region 1: I/O ports at 6114 [size=4]
> Region 2: I/O ports at 60f0 [size=8]
> Region 3: I/O ports at 6110 [size=4]
> Region 4: I/O ports at 6020 [size=16]
> Region 5: I/O ports at 1000 [size=16]
> Capabilities: <access denied>
> Kernel driver in use: ata_piix
> Kernel modules: ata_piix, pata_acpi, ata_generic
>
>
> Any suggestions?
You can try increasing the swiotlb size by booting with swiotlb=65536
(for 128MB) or swiotlb=131072 (for 256MB), and see if that makes the
problem go away.. It's unclear why you'd be running out of SWIOTLB space
now, though, if 2.6.26 worked fine..
I wonder why Apple hasn't set up the SATA controller in AHCI mode on
these machines. If they had, you wouldn't have this problem as it would
support 64-bit DMA and not need the SWIOTLB.
^ permalink raw reply [flat|nested] 5+ messages in thread