From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Lord Subject: Re: sata_mv (NOT!) Date: Wed, 13 Aug 2008 12:12:03 -0400 Message-ID: <48A307D3.2000905@rtr.ca> References: <48A0C170.2000803@verizon.net> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: Received: from rtr.ca ([76.10.145.34]:54550 "EHLO mail.rtr.ca" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751087AbYHMQMC (ORCPT ); Wed, 13 Aug 2008 12:12:02 -0400 In-Reply-To: <48A0C170.2000803@verizon.net> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Steven Gill Cc: linux-ide@vger.kernel.org Steven Gill wrote: > Hi List, > > I am having some issues getting my Marvell 6145 working on my Asus P5E > ws pro motherboard working. I am using a 3rd party patch to get the > pata port working, but have not had success with my e-sata ports (on the > board the 6145 drives 2 sata and 2 e-sata ports. There are another 6 > sata ports driven by the onboard intel ich9). When checking dmesg > output, I see this: > > ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > Marvell (S)ATA Controller is found, using IRQ 16. > Interrupt Error: 0x40000000 orgIntStatus: 0x40000001 completeSlot=0x1. > > I am willing to help debug any issues, test patches, etc, but most > importantly wanted to report the issue. I know this is labelled as > "highly experimental", but again, wanted to offer assistance in testing. .. Wrong driver. sata_mv does *NOT* drive the 6145 chip. Rather, that particular chip emulates AHCI, and uses the ahci driver. -ml