From: Bokhan Artem <APTEM@ngs.ru>
To: Mark Lord <liml@rtr.ca>, Tejun Heo <htejun@gmail.com>,
linux-ide@vger.kernel.org
Subject: Re: [PATCH #upstream-fixes] sata_mv: don't issue two DMA commands concurrently
Date: Thu, 14 Aug 2008 02:58:20 +0700 [thread overview]
Message-ID: <48A33CDC.3000809@ngs.ru> (raw)
In-Reply-To: <48A30920.5030803@rtr.ca>
As it named RETRY, I set it to 0, "define SD_MAX_RETRIES 0"
But still got two retries. Any suggestions?
dd if=/dev/sda of=/dev/null bs=512 skip=20359137 count=1
Aug 13 15:50:02 ubuntu kernel: [ 244.688030] res
51/40:08:e0:a7:36/01:00:01:00:00/00 Emask 0x409 (media error) <F>
Aug 13 15:50:02 ubuntu kernel: [ 244.688206] ata5: hard resetting link
Aug 13 15:50:02 ubuntu kernel: [ 245.226248] ata5: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Aug 13 15:50:02 ubuntu kernel: [ 245.306267] ata5.00: max_sectors
limited to 256 for NCQ
Aug 13 15:50:02 ubuntu kernel: [ 245.388635] ata5.00: max_sectors
limited to 256 for NCQ
Aug 13 15:50:02 ubuntu kernel: [ 245.388637] ata5.00: configured for
UDMA/133
Aug 13 15:50:02 ubuntu kernel: [ 245.388643] sd 4:0:0:0: [sda] Result:
hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Aug 13 15:50:02 ubuntu kernel: [ 245.388646] sd 4:0:0:0: [sda] Sense
Key : Medium Error [current] [descriptor]
Aug 13 15:50:02 ubuntu kernel: [ 245.388649] Descriptor sense data with
sense descriptors (in hex):
Aug 13 15:50:02 ubuntu kernel: [ 245.388651] 72 03 11 04 00 00
00 0c 00 0a 80 00 00 00 00 00
Aug 13 15:50:02 ubuntu kernel: [ 245.388658] 01 36 a7 e0
Aug 13 15:50:02 ubuntu kernel: [ 245.388661] sd 4:0:0:0: [sda] Add.
Sense: Unrecovered read error - auto reallocate failed
Aug 13 15:50:02 ubuntu kernel: [ 245.388783] ata5: EH complete
Aug 13 15:50:02 ubuntu kernel: [ 245.388722] sd 4:0:0:0: [sda]
1465149168 512-byte hardware sectors (750156 MB)
Aug 13 15:50:02 ubuntu kernel: [ 245.388722] sd 4:0:0:0: [sda] Write
Protect is off
Aug 13 15:50:02 ubuntu kernel: [ 245.388722] sd 4:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Aug 13 15:50:04 ubuntu kernel: [ 247.117648] res
51/40:08:e0:a7:36/01:00:01:00:00/00 Emask 0x409 (media error) <F>
Aug 13 15:50:04 ubuntu kernel: [ 247.117824] ata5: hard resetting link
Aug 13 15:50:04 ubuntu kernel: [ 247.659679] ata5: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Aug 13 15:50:04 ubuntu kernel: [ 247.747372] ata5.00: max_sectors
limited to 256 for NCQ
Aug 13 15:50:04 ubuntu kernel: [ 247.825139] ata5.00: max_sectors
limited to 256 for NCQ
Aug 13 15:50:04 ubuntu kernel: [ 247.825141] ata5.00: configured for
UDMA/133
Aug 13 15:50:04 ubuntu kernel: [ 247.825145] sd 4:0:0:0: [sda] Result:
hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
Aug 13 15:50:04 ubuntu kernel: [ 247.825148] sd 4:0:0:0: [sda] Sense
Key : Medium Error [current] [descriptor]
Aug 13 15:50:04 ubuntu kernel: [ 247.825151] Descriptor sense data with
sense descriptors (in hex):
Aug 13 15:50:04 ubuntu kernel: [ 247.825153] 72 03 11 04 00 00
00 0c 00 0a 80 00 00 00 00 00
Aug 13 15:50:04 ubuntu kernel: [ 247.825160] 01 36 a7 e0
Aug 13 15:50:04 ubuntu kernel: [ 247.825163] sd 4:0:0:0: [sda] Add.
Sense: Unrecovered read error - auto reallocate failed
Aug 13 15:50:04 ubuntu kernel: [ 247.825281] ata5: EH complete
Aug 13 15:50:04 ubuntu kernel: [ 247.825223] sd 4:0:0:0: [sda]
1465149168 512-byte hardware sectors (750156 MB)
Aug 13 15:50:04 ubuntu kernel: [ 247.825223] sd 4:0:0:0: [sda] Write
Protect is off
Aug 13 15:50:04 ubuntu kernel: [ 247.825223] sd 4:0:0:0: [sda] Write
cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mark Lord пишет:
> Artem Bokhan wrote:
>> When I run 'dd if=/dev/sda of=/dev/null skip=9700 bs=1M' and it meets
>> bad block, it takes about
>> '/sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:02.0/host4/target4:0:0/4:0:0:0/timeout
>> + about 10 seconds' to determine I/O error. Until that IO to device
>> is locked, as I understand. I want to reduce the time of lock as
>> much as possible.
> ..
>
> Tell the SCSI layer to stop flogging the drive with unnecessary retries.
> A quick and dirty way, is this patch below, but it really should be more
> intelligent than this for some situations:
>
> --- linux/include/scsi/sd.h.orig 2008-06-09 14:27:19.000000000 -0400
> +++ linux/include/scsi/sd.h 2008-08-13 12:16:01.000000000 -0400
> @@ -23,7 +23,7 @@
> /*
> * Number of allowed retries
> */
> -#define SD_MAX_RETRIES 5
> +#define SD_MAX_RETRIES 1
> #define SD_PASSTHROUGH_RETRIES 1
>
> /*
next prev parent reply other threads:[~2008-08-13 19:58 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-08 10:02 bad sectors, suspicious behaviour Artem Bokhan
2008-08-08 13:34 ` Mark Lord
2008-08-08 13:50 ` Mark Lord
2008-08-08 14:14 ` Mark Lord
2008-08-11 11:12 ` Bokhan Artem
2008-08-13 8:40 ` Tejun Heo
2008-08-13 10:47 ` Artem Bokhan
2008-08-13 10:50 ` Tejun Heo
2008-08-13 11:19 ` Artem Bokhan
2008-08-13 11:24 ` [PATCH #upstream-fixes] sata_mv: don't issue two DMA commands concurrently Tejun Heo
2008-08-13 11:37 ` Artem Bokhan
2008-08-13 11:52 ` Tejun Heo
2008-08-13 12:05 ` Artem Bokhan
2008-08-13 12:21 ` Tejun Heo
2008-08-13 12:32 ` Artem Bokhan
2008-08-13 16:17 ` Mark Lord
2008-08-13 17:37 ` Bokhan Artem
2008-08-13 19:58 ` Bokhan Artem [this message]
2008-08-13 23:36 ` Mark Lord
2008-08-14 7:42 ` Artem Bokhan
2008-08-14 12:40 ` Mark Lord
2008-08-14 12:58 ` Artem Bokhan
2008-08-14 13:17 ` Artem Bokhan
2008-08-14 19:49 ` Mark Lord
2008-08-15 5:35 ` Artem Bokhan
2008-08-15 12:27 ` Mark Lord
2008-08-13 16:57 ` Greg Freemyer
2008-08-13 17:29 ` Bokhan Artem
2008-08-13 17:50 ` Greg Freemyer
2008-08-13 18:04 ` Bokhan Artem
2008-08-13 18:13 ` Greg Freemyer
2008-08-13 11:47 ` Artem Bokhan
2008-08-13 11:52 ` Tejun Heo
2008-08-22 16:28 ` Grant Grundler
2008-08-13 16:10 ` Mark Lord
2008-08-22 6:11 ` Jeff Garzik
2008-08-22 17:01 ` Martin Michlmayr
2008-08-26 13:54 ` Mark Lord
2008-08-29 7:12 ` Martin Michlmayr
2008-08-26 1:24 ` Gwendal Grignou
2008-08-26 7:04 ` Tejun Heo
2008-08-26 13:58 ` Mark Lord
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48A33CDC.3000809@ngs.ru \
--to=aptem@ngs.ru \
--cc=htejun@gmail.com \
--cc=liml@rtr.ca \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).