* Intel AHCI ICH9R not detecting devices
@ 2008-08-22 15:29 xerces8
2008-08-30 10:40 ` Tejun Heo
0 siblings, 1 reply; 13+ messages in thread
From: xerces8 @ 2008-08-22 15:29 UTC (permalink / raw)
To: linux-ide, Jeff Garzik, stein
(this time with proper subject)
Hi!
I noticed that recent kernels do not detect my SATA devices (two
SATA hard drives and one DVD unit).
HW: Asus P5K-E WiFi mainboard, BIOS version 1013 (latest as of now)
BIOS setup: SATA adapter mode : AHCI
CPU: Intel Core2 Q6600 (not overclocked)
RAM: 4x2GB DDR2-800
Kernel: 2.6.26.3 (vanilla unpatched)
arch: i386
kernel config : http://pastebin.com/f7640ead2
dmesg output : http://pastebin.com/f3b3fac14
lspci: http://pastebin.com/f2a3edebf
lspci -v -n : http://pastebin.com/f724cf3
/proc/cpuinfo: http://pastebin.com/f11930c44
uname -a :
Linux RIPLinuX 2.6.26.3 #1 Fri Aug 22 16:24:23 CEST 2008 i686 GNU/Linux
/proc/version:
Linux version 2.6.26.3 (stein@udba) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 Fri Aug 22
16:24:23 CEST 2008
Funny thing, in 64 bit mode it all works fine (tested and first
discovered with RIPLinux 6.3; the above config should match the 32 bit
config from riplinux)
Please advise.
Regards,
David Balažic
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-08-22 15:29 Intel AHCI ICH9R not detecting devices xerces8
@ 2008-08-30 10:40 ` Tejun Heo
2008-08-30 19:42 ` xerces8
0 siblings, 1 reply; 13+ messages in thread
From: Tejun Heo @ 2008-08-30 10:40 UTC (permalink / raw)
To: xerces8; +Cc: linux-ide, Jeff Garzik, stein
Hello,
xerces8 wrote:
> I noticed that recent kernels do not detect my SATA devices (two
> SATA hard drives and one DVD unit).
>
> HW: Asus P5K-E WiFi mainboard, BIOS version 1013 (latest as of now)
> BIOS setup: SATA adapter mode : AHCI
> CPU: Intel Core2 Q6600 (not overclocked)
> RAM: 4x2GB DDR2-800
>
> Kernel: 2.6.26.3 (vanilla unpatched)
> arch: i386
>
> kernel config : http://pastebin.com/f7640ead2
> dmesg output : http://pastebin.com/f3b3fac14
> lspci: http://pastebin.com/f2a3edebf
> lspci -v -n : http://pastebin.com/f724cf3
> /proc/cpuinfo: http://pastebin.com/f11930c44
It's usually best to include relevant excerpts inline and then attach
the whole stuff as attachments. Posting links to some URL or non-OSDL
bugzilla entries is likely to significantly increase your chance of
just being skipped over. You know, we're cranky nerds who hate the
web and stick to 80-column terminals. ;-)
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ahci: probe of 0000:00:1f.2 failed with error -16
This looks like resource conflict to me, which could have resulted
from ahci trying to grab all resources. Can you please post the
result of "cat /proc/ioports" and "cat /proc/iomem"?
> Funny thing, in 64 bit mode it all works fine (tested and first
> discovered with RIPLinux 6.3; the above config should match the 32 bit
> config from riplinux)
Yeah, different arch codes can do strange things to PCI IRQ routing or
resource allocations.
--
tejun
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-08-30 10:40 ` Tejun Heo
@ 2008-08-30 19:42 ` xerces8
2008-09-01 9:13 ` Tejun Heo
0 siblings, 1 reply; 13+ messages in thread
From: xerces8 @ 2008-08-30 19:42 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide, Jeff Garzik, stein
[-- Attachment #1: Type: text/plain, Size: 1661 bytes --]
Tejun Heo wrote:
> xerces8 wrote:
> > I noticed that recent kernels do not detect my SATA devices (two
> > SATA hard drives and one DVD unit).
> >
> > HW: Asus P5K-E WiFi mainboard, BIOS version 1013 (latest as of now)
> > BIOS setup: SATA adapter mode : AHCI
> > CPU: Intel Core2 Q6600 (not overclocked)
> > RAM: 4x2GB DDR2-800
> >
> > Kernel: 2.6.26.3 (vanilla unpatched)
> > arch: i386
> >
> > kernel config : http://pastebin.com/f7640ead2
> > dmesg output : http://pastebin.com/f3b3fac14
> > lspci: http://pastebin.com/f2a3edebf
> > lspci -v -n : http://pastebin.com/f724cf3
> > /proc/cpuinfo: http://pastebin.com/f11930c44
>
> It's usually best to include relevant excerpts inline and then attach
> the whole stuff as attachments. Posting links to some URL or non-OSDL
> bugzilla entries is likely to significantly increase your chance of
> just being skipped over. You know, we're cranky nerds who hate the
> web and stick to 80-column terminals. ;-)
>
> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
> ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ACPI: PCI interrupt for device 0000:00:1f.2 disabled
> ahci: probe of 0000:00:1f.2 failed with error -16
>
> This looks like resource conflict to me, which could have resulted
> from ahci trying to grab all resources. Can you please post the
> result of "cat /proc/ioports" and "cat /proc/iomem"?
I noticed that in IDE mode the same happens (32bit kernel has problems,
64bit kernel has not), so here is dmesg, iomem and ioports for all 4
combinations.
Regards,
David
[-- Attachment #2: 32-ahci-dmesg --]
[-- Type: application/octet-stream, Size: 15430 bytes --]
d
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.9)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with security attributes, realtime, large block numbers, no debug enabled
msgmni has been set to 1708
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered (default)
pci 0000:01:00.0: Boot video device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CFF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
ACPI: ACPI0007:00 is registered as cooling_device0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 10 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1e:8c:07:41:53
cs89x0:cs89x0_probe(0x0)
PP_addr at 300[a]: 0xffff
eth1: incorrect signature at 300[c]: 0xffff!=0x630E
PP_addr at 320[a]: 0xffff
eth1: incorrect signature at 320[c]: 0xffff!=0x630E
PP_addr at 340[a]: 0xffff
eth1: incorrect signature at 340[c]: 0xffff!=0x630E
PP_addr at 360[a]: 0xffff
eth1: incorrect signature at 360[c]: 0xffff!=0x630E
PP_addr at 200[a]: 0xffff
eth1: incorrect signature at 200[c]: 0xffff!=0x630E
PP_addr at 220[a]: 0xffff
eth1: incorrect signature at 220[c]: 0xffff!=0x630E
PP_addr at 240[a]: 0xffff
eth1: incorrect signature at 240[c]: 0xffff!=0x630E
PP_addr at 260[a]: 0xffff
eth1: incorrect signature at 260[c]: 0xffff!=0x630E
PP_addr at 280[a]: 0xffff
eth1: incorrect signature at 280[c]: 0xffff!=0x630E
PP_addr at 2a0[a]: 0xffff
eth1: incorrect signature at 2a0[c]: 0xffff!=0x630E
PP_addr at 2c0[a]: 0xffff
eth1: incorrect signature at 2c0[c]: 0xffff!=0x630E
PP_addr at 2e0[a]: 0xffff
eth1: incorrect signature at 2e0[c]: 0xffff!=0x630E
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
eth%d: i82596 initialization timed out
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ahci: probe of 0000:00:1f.2 failed with error -16
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 11
ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 11
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:03:00.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata3: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 10
ata4: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 10
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 14
PCI: setting IRQ 14 as level-triggered
ACPI: PCI Interrupt 0000:05:03.0[A] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
ohci1394: Failed to allocate interrupt 14
ohci1394: probe of 0000:05:03.0 failed with error -12
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: Cannot register CSR space
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 5, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 7, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 11, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 3, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 5, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: request interrupt 14 failed
uhci_hcd 0000:00:1d.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -16
uhci_hcd: probe of 0000:00:1d.1 failed with error -16
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000b480
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
sl811: driver sl811-hcd, 19 May 2005
usb 2-2: configuration #1 chosen from 1 choice
usb 7-1: new low speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 960 MB/s
raid6: int32x2 904 MB/s
raid6: int32x4 781 MB/s
raid6: int32x8 701 MB/s
raid6: mmxx1 3101 MB/s
raid6: mmxx2 3523 MB/s
raid6: sse1x1 2108 MB/s
raid6: sse1x2 2721 MB/s
raid6: sse2x1 3769 MB/s
raid6: sse2x2 4312 MB/s
raid6: using algorithm sse2x2 (4312 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
padlock: VIA PadLock not detected.
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 300k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
hda-intel: unable to grab IRQ 15, disabling device
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
HDA Intel: probe of 0000:00:1b.0 failed with error -16
phy0: Selected rate control algorithm 'pid'
phy0: hwaddr 00:15:af:3e:d3:5b, rtl8187 V1 + rtl8225z2
usbcore: registered new interface driver rtl8187
scsi 6:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 6:0:0:0: [sda] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
[-- Attachment #3: 32-ahci-iomem --]
[-- Type: application/octet-stream, Size: 1573 bytes --]
00000000-0009ebff : System RAM
0009ec00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccdff : Video ROM
000f0000-000fffff : System ROM
00100000-cff7ffff : System RAM
00100000-006607b2 : Kernel code
006607b3-008ea7e7 : Kernel data
00939000-00988647 : Kernel bss
cff80000-cff8dfff : ACPI Tables
cff8e000-cffdffff : ACPI Non-volatile Storage
cffe0000-cfffffff : reserved
d0000000-dfffffff : PCI Bus 0000:01
d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : pnp 00:0c
f8f00000-f8ffffff : PCI Bus 0000:04
f9ff8000-f9ffbfff : 0000:00:1b.0
f9ffe800-f9ffefff : 0000:00:1f.2
f9fff400-f9fff4ff : 0000:00:1f.3
f9fff800-f9fffbff : 0000:00:1d.7
f9fff800-f9fffbff : ehci_hcd
f9fffc00-f9ffffff : 0000:00:1a.7
f9fffc00-f9ffffff : ehci_hcd
fa000000-fe8fffff : PCI Bus 0000:01
fa000000-fbffffff : 0000:01:00.0
fd000000-fdffffff : 0000:01:00.0
fe8e0000-fe8fffff : 0000:01:00.0
fe900000-fe9fffff : PCI Bus 0000:02
fe9c0000-fe9dffff : 0000:02:00.0
fe9fc000-fe9fffff : 0000:02:00.0
fe9fc000-fe9fffff : sky2
fea00000-feafffff : PCI Bus 0000:03
feae0000-feaeffff : 0000:03:00.0
feafe000-feafffff : 0000:03:00.0
feafe000-feafffff : ahci
feb00000-febfffff : PCI Bus 0000:05
febff000-febfffff : 0000:05:03.0
fec00000-fec00fff : pnp 00:0a
fed00000-fed003ff : HPET 0
fed14000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:07
fed20000-fed3ffff : pnp 00:07
fed50000-fed8ffff : pnp 00:07
fee00000-fee00fff : reserved
ffa00000-ffafffff : pnp 00:07
ffb00000-ffbfffff : pnp 00:07
ffe00000-ffffffff : reserved
[-- Attachment #4: 32-ahci-ioports --]
[-- Type: application/octet-stream, Size: 1579 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0110-0110 : 3c509-control
0170-0177 : ide_generic
01f0-01f7 : ide_generic
0290-0297 : pnp 00:06
0320-0323 : wd7000
0350-0353 : wd7000
0376-0376 : ide_generic
03c0-03df : vga+
03f6-03f6 : ide_generic
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0480-04bf : 0000:00:1f.0
0480-04bf : pnp 00:07
04d0-04d1 : pnp 00:07
0800-087f : 0000:00:1f.0
0800-087f : pnp 00:07
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
a400-a41f : 0000:00:1f.2
a480-a483 : 0000:00:1f.2
a800-a807 : 0000:00:1f.2
a880-a883 : 0000:00:1f.2
ac00-ac07 : 0000:00:1f.2
b080-b09f : 0000:00:1d.0
b080-b09f : uhci_hcd
b400-b41f : 0000:00:1d.1
b480-b49f : 0000:00:1d.2
b480-b49f : uhci_hcd
b800-b81f : 0000:00:1a.0
b800-b81f : uhci_hcd
b880-b89f : 0000:00:1a.1
b880-b89f : uhci_hcd
bc00-bc1f : 0000:00:1a.2
bc00-bc1f : uhci_hcd
c000-cfff : PCI Bus 0000:01
cc00-cc7f : 0000:01:00.0
d000-dfff : PCI Bus 0000:02
d800-d8ff : 0000:02:00.0
d800-d8ff : sky2
e000-efff : PCI Bus 0000:03
e400-e40f : 0000:03:00.1
e400-e40f : pata_jmicron
e480-e483 : 0000:03:00.1
e480-e483 : pata_jmicron
e800-e807 : 0000:03:00.1
e800-e807 : pata_jmicron
e880-e883 : 0000:03:00.1
e880-e883 : pata_jmicron
ec00-ec07 : 0000:03:00.1
ec00-ec07 : pata_jmicron
[-- Attachment #5: 32-IDE-dmesg --]
[-- Type: application/octet-stream, Size: 15445 bytes --]
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 10 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1e:8c:07:41:53
cs89x0:cs89x0_probe(0x0)
PP_addr at 300[a]: 0xffff
eth1: incorrect signature at 300[c]: 0xffff!=0x630E
PP_addr at 320[a]: 0xffff
eth1: incorrect signature at 320[c]: 0xffff!=0x630E
PP_addr at 340[a]: 0xffff
eth1: incorrect signature at 340[c]: 0xffff!=0x630E
PP_addr at 360[a]: 0xffff
eth1: incorrect signature at 360[c]: 0xffff!=0x630E
PP_addr at 200[a]: 0xffff
eth1: incorrect signature at 200[c]: 0xffff!=0x630E
PP_addr at 220[a]: 0xffff
eth1: incorrect signature at 220[c]: 0xffff!=0x630E
PP_addr at 240[a]: 0xffff
eth1: incorrect signature at 240[c]: 0xffff!=0x630E
PP_addr at 260[a]: 0xffff
eth1: incorrect signature at 260[c]: 0xffff!=0x630E
PP_addr at 280[a]: 0xffff
eth1: incorrect signature at 280[c]: 0xffff!=0x630E
PP_addr at 2a0[a]: 0xffff
eth1: incorrect signature at 2a0[c]: 0xffff!=0x630E
PP_addr at 2c0[a]: 0xffff
eth1: incorrect signature at 2c0[c]: 0xffff!=0x630E
PP_addr at 2e0[a]: 0xffff
eth1: incorrect signature at 2e0[c]: 0xffff!=0x630E
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
eth%d: i82596 initialization timed out
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:03:00.0: version 3.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 11
ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 11
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ata_piix: probe of 0000:00:1f.2 failed with error -16
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ata_piix: probe of 0000:00:1f.5 failed with error -16
ACPI: PCI Interrupt 0000:03:00.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata3: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 10
ata4: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 10
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
PCI: Setting latency timer of device 0000:00:1f.5 to 64
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 14
PCI: setting IRQ 14 as level-triggered
ACPI: PCI Interrupt 0000:05:03.0[A] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
ohci1394: Failed to allocate interrupt 14
ohci1394: probe of 0000:05:03.0 failed with error -12
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: Cannot register CSR space
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 5, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 7, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 11, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 3, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 5, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: request interrupt 14 failed
uhci_hcd 0000:00:1d.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -16
uhci_hcd: probe of 0000:00:1d.1 failed with error -16
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000b480
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
sl811: driver sl811-hcd, 19 May 2005
usb 2-2: configuration #1 chosen from 1 choice
usb 7-1: new low speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 960 MB/s
raid6: int32x2 904 MB/s
raid6: int32x4 781 MB/s
raid6: int32x8 702 MB/s
raid6: mmxx1 3101 MB/s
raid6: mmxx2 3524 MB/s
raid6: sse1x1 2108 MB/s
raid6: sse1x2 2721 MB/s
raid6: sse2x1 3768 MB/s
raid6: sse2x2 4312 MB/s
raid6: using algorithm sse2x2 (4312 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
padlock: VIA PadLock not detected.
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 300k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
hda-intel: unable to grab IRQ 15, disabling device
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
HDA Intel: probe of 0000:00:1b.0 failed with error -16
phy0: Selected rate control algorithm 'pid'
phy0: hwaddr 00:15:af:3e:d3:5b, rtl8187 V1 + rtl8225z2
usbcore: registered new interface driver rtl8187
scsi 6:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 6:0:0:0: [sda] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
ohci1394: fw-host0: Set PHY Reg timeout [0xffffffff/0x00004000/100]
mtrr: type mismatch for fbc00000,200000 old: write-back new: write-combining
mtrr: type mismatch for fb800000,400000 old: write-back new: write-combining
mtrr: type mismatch for fb000000,800000 old: write-back new: write-combining
[-- Attachment #6: 32-IDE-iomem --]
[-- Type: application/octet-stream, Size: 1540 bytes --]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000ccdff : Video ROM
000f0000-000fffff : System ROM
00100000-cff7ffff : System RAM
00100000-006607b2 : Kernel code
006607b3-008ea7e7 : Kernel data
00939000-00988647 : Kernel bss
cff80000-cff8dfff : ACPI Tables
cff8e000-cffdffff : ACPI Non-volatile Storage
cffe0000-cfffffff : reserved
d0000000-dfffffff : PCI Bus 0000:01
d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : pnp 00:0c
f8f00000-f8ffffff : PCI Bus 0000:04
f9ff8000-f9ffbfff : 0000:00:1b.0
f9fff400-f9fff4ff : 0000:00:1f.3
f9fff800-f9fffbff : 0000:00:1d.7
f9fff800-f9fffbff : ehci_hcd
f9fffc00-f9ffffff : 0000:00:1a.7
f9fffc00-f9ffffff : ehci_hcd
fa000000-fe8fffff : PCI Bus 0000:01
fa000000-fbffffff : 0000:01:00.0
fd000000-fdffffff : 0000:01:00.0
fe8e0000-fe8fffff : 0000:01:00.0
fe900000-fe9fffff : PCI Bus 0000:02
fe9c0000-fe9dffff : 0000:02:00.0
fe9fc000-fe9fffff : 0000:02:00.0
fe9fc000-fe9fffff : sky2
fea00000-feafffff : PCI Bus 0000:03
feae0000-feaeffff : 0000:03:00.0
feafe000-feafffff : 0000:03:00.0
feafe000-feafffff : ahci
feb00000-febfffff : PCI Bus 0000:05
febff000-febfffff : 0000:05:03.0
fec00000-fec00fff : pnp 00:0a
fed00000-fed003ff : HPET 0
fed14000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:07
fed20000-fed3ffff : pnp 00:07
fed50000-fed8ffff : pnp 00:07
fee00000-fee00fff : reserved
ffa00000-ffafffff : pnp 00:07
ffb00000-ffbfffff : pnp 00:07
ffe00000-ffffffff : reserved
[-- Attachment #7: 32-IDE-ioports --]
[-- Type: application/octet-stream, Size: 1754 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0110-0110 : 3c509-control
0170-0177 : ide_generic
01f0-01f7 : ide_generic
0290-0297 : pnp 00:06
0320-0323 : wd7000
0350-0353 : wd7000
0376-0376 : ide_generic
03c0-03df : vga+
03f6-03f6 : ide_generic
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0480-04bf : 0000:00:1f.0
0480-04bf : pnp 00:07
04d0-04d1 : pnp 00:07
0800-087f : 0000:00:1f.0
0800-087f : pnp 00:07
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
9400-940f : 0000:00:1f.2
9480-948f : 0000:00:1f.2
9800-9803 : 0000:00:1f.2
9880-9887 : 0000:00:1f.2
9c00-9c03 : 0000:00:1f.2
a000-a007 : 0000:00:1f.2
a400-a40f : 0000:00:1f.5
a480-a48f : 0000:00:1f.5
a800-a803 : 0000:00:1f.5
a880-a887 : 0000:00:1f.5
ac00-ac03 : 0000:00:1f.5
b000-b007 : 0000:00:1f.5
b080-b09f : 0000:00:1d.0
b080-b09f : uhci_hcd
b400-b41f : 0000:00:1d.1
b480-b49f : 0000:00:1d.2
b480-b49f : uhci_hcd
b800-b81f : 0000:00:1a.0
b800-b81f : uhci_hcd
b880-b89f : 0000:00:1a.1
b880-b89f : uhci_hcd
bc00-bc1f : 0000:00:1a.2
bc00-bc1f : uhci_hcd
c000-cfff : PCI Bus 0000:01
cc00-cc7f : 0000:01:00.0
d000-dfff : PCI Bus 0000:02
d800-d8ff : 0000:02:00.0
d800-d8ff : sky2
e000-efff : PCI Bus 0000:03
e400-e40f : 0000:03:00.1
e400-e40f : pata_jmicron
e480-e483 : 0000:03:00.1
e480-e483 : pata_jmicron
e800-e807 : 0000:03:00.1
e800-e807 : pata_jmicron
e880-e883 : 0000:03:00.1
e880-e883 : pata_jmicron
ec00-ec07 : 0000:03:00.1
ec00-ec07 : pata_jmicron
[-- Attachment #8: 64-ahci-dmesg --]
[-- Type: application/octet-stream, Size: 15445 bytes --]
h tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Overmounted tmpfs
Freeing initrd memory: 75080k freed
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.9)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with security attributes, realtime, large block/inode numbers, no debug enabled
msgmni has been set to 15961
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered (default)
pci 0000:01:00.0: Boot video device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CFF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
ACPI: ACPI0007:00 is registered as cooling_device0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1e:8c:07:41:53
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe900 irq 22
ata2: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffe980 irq 22
ata3: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea00 irq 22
ata4: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffea80 irq 22
ata5: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb00 irq 22
ata6: SATA max UDMA/133 abar m2048@0xf9ffe800 port 0xf9ffeb80 irq 22
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB01, max UDMA/100, ATAPI AN
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: SAMSUNG HD642JJ, 1AA01110, max UDMA7
ata5.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sd 4:0:0:0: [sda] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi8 : pata_jmicron
scsi9 : pata_jmicron
ata9: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
ata10: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
usb 2-2: configuration #1 chosen from 1 choice
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00000081db]
usb 8-1: new low speed USB device using uhci_hcd and address 2
usb 8-1: configuration #1 chosen from 1 choice
usb 8-2: new low speed USB device using uhci_hcd and address 3
usb 8-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi10 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int64x1 2262 MB/s
raid6: int64x2 2852 MB/s
raid6: int64x4 2724 MB/s
raid6: int64x8 2204 MB/s
raid6: sse2x1 3880 MB/s
raid6: sse2x2 4421 MB/s
raid6: sse2x4 7265 MB/s
raid6: using algorithm sse2x4 (7265 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 284k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
phy0: Selected rate control algorithm 'pid'
phy0: hwaddr 00:15:af:3e:d3:5b, rtl8187 V1 + rtl8225z2
usbcore: registered new interface driver rtl8187
scsi 10:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 10:0:0:0: [sdb] 2006673 512-byte hardware sectors (1027 MB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sd 10:0:0:0: [sdb] 2006673 512-byte hardware sectors (1027 MB)
sd 10:0:0:0: [sdb] Write Protect is off
sd 10:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 10:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 10:0:0:0: [sdb] Attached SCSI removable disk
sd 10:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
[-- Attachment #9: 64-ahci-iomem --]
[-- Type: application/octet-stream, Size: 1728 bytes --]
00000000-0009ebff : System RAM
0009ec00-0009ffff : reserved
000c0000-000cffff : pnp 00:0d
000e4000-000fffff : reserved
00100000-cff7ffff : System RAM
00200000-007d271b : Kernel code
007d271c-00ad758f : Kernel data
00b28000-00b93147 : Kernel bss
cff80000-cff8dfff : ACPI Tables
cff8e000-cffdffff : ACPI Non-volatile Storage
cffe0000-cfffffff : reserved
d0000000-dfffffff : PCI Bus 0000:01
d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : pnp 00:0c
f8f00000-f8ffffff : PCI Bus 0000:04
f9ff8000-f9ffbfff : 0000:00:1b.0
f9ff8000-f9ffbfff : ICH HD audio
f9ffe800-f9ffefff : 0000:00:1f.2
f9ffe800-f9ffefff : ahci
f9fff400-f9fff4ff : 0000:00:1f.3
f9fff800-f9fffbff : 0000:00:1d.7
f9fff800-f9fffbff : ehci_hcd
f9fffc00-f9ffffff : 0000:00:1a.7
f9fffc00-f9ffffff : ehci_hcd
fa000000-fe8fffff : PCI Bus 0000:01
fa000000-fbffffff : 0000:01:00.0
fd000000-fdffffff : 0000:01:00.0
fe8e0000-fe8fffff : 0000:01:00.0
fe900000-fe9fffff : PCI Bus 0000:02
fe9c0000-fe9dffff : 0000:02:00.0
fe9fc000-fe9fffff : 0000:02:00.0
fe9fc000-fe9fffff : sky2
fea00000-feafffff : PCI Bus 0000:03
feae0000-feaeffff : 0000:03:00.0
feafe000-feafffff : 0000:03:00.0
feafe000-feafffff : ahci
feb00000-febfffff : PCI Bus 0000:05
febff000-febfffff : 0000:05:03.0
febff000-febff7ff : ohci1394
fec00000-fec00fff : IOAPIC 0
fec00000-fec00fff : pnp 00:0a
fed00000-fed003ff : HPET 0
fed14000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:07
fed20000-fed3ffff : pnp 00:07
fed50000-fed8ffff : pnp 00:07
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
ffa00000-ffafffff : pnp 00:07
ffb00000-ffbfffff : pnp 00:07
ffe00000-ffffffff : reserved
100000000-22fffffff : System RAM
[-- Attachment #10: 64-ahci-ioports --]
[-- Type: application/octet-stream, Size: 1633 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide_generic
01f0-01f7 : ide_generic
0290-0297 : pnp 00:06
0376-0376 : ide_generic
03c0-03df : vga+
03f6-03f6 : ide_generic
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0480-04bf : 0000:00:1f.0
0480-04bf : pnp 00:07
04d0-04d1 : pnp 00:07
0800-087f : 0000:00:1f.0
0800-087f : pnp 00:07
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
a400-a41f : 0000:00:1f.2
a400-a41f : ahci
a480-a483 : 0000:00:1f.2
a480-a483 : ahci
a800-a807 : 0000:00:1f.2
a800-a807 : ahci
a880-a883 : 0000:00:1f.2
a880-a883 : ahci
ac00-ac07 : 0000:00:1f.2
ac00-ac07 : ahci
b080-b09f : 0000:00:1d.0
b080-b09f : uhci_hcd
b400-b41f : 0000:00:1d.1
b400-b41f : uhci_hcd
b480-b49f : 0000:00:1d.2
b480-b49f : uhci_hcd
b800-b81f : 0000:00:1a.0
b800-b81f : uhci_hcd
b880-b89f : 0000:00:1a.1
b880-b89f : uhci_hcd
bc00-bc1f : 0000:00:1a.2
bc00-bc1f : uhci_hcd
c000-cfff : PCI Bus 0000:01
cc00-cc7f : 0000:01:00.0
d000-dfff : PCI Bus 0000:02
d800-d8ff : 0000:02:00.0
d800-d8ff : sky2
e000-efff : PCI Bus 0000:03
e400-e40f : 0000:03:00.1
e400-e40f : pata_jmicron
e480-e483 : 0000:03:00.1
e480-e483 : pata_jmicron
e800-e807 : 0000:03:00.1
e800-e807 : pata_jmicron
e880-e883 : 0000:03:00.1
e880-e883 : pata_jmicron
ec00-ec07 : 0000:03:00.1
ec00-ec07 : pata_jmicron
[-- Attachment #11: 64-ide-dmesg --]
[-- Type: application/octet-stream, Size: 15457 bytes --]
utton (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CFF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
ACPI: ACPI0007:00 is registered as cooling_device0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 17 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1e:8c:07:41:53
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:03:00.0: version 3.0
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi0 : ahci
scsi1 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 16
ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 16
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.01: NODEV after polling detection
ata3.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB01, max UDMA/100
ata3.00: configured for UDMA/100
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-7: WDC WD7500AAKS-00RBA0, 30.04G30, max UDMA/133
ata4.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203P SB01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
sr 2:0:0:0: Attached scsi generic sg0 type 5
scsi 3:0:0:0: Direct-Access ATA WDC WD7500AAKS-0 30.0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] 1465149168 512-byte hardware sectors (750156 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: [LDM] sda1 sda2 sda3 sda4 sda5 sda6
sd 3:0:0:0: [sda] Attached SCSI disk
sd 3:0:0:0: Attached scsi generic sg1 type 0
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 22 (level, low) -> IRQ 22
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 22
ata6: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 22
ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATA-7: SAMSUNG HD642JJ, 1AA01110, max UDMA7
ata5.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
ata6: SATA link down (SStatus 0 SControl 300)
scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD642JJ 1AA0 PQ: 0 ANSI: 5
sd 4:0:0:0: [sdb] 1250263728 512-byte hardware sectors (640135 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sdb] 1250263728 512-byte hardware sectors (640135 MB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 4:0:0:0: [sdb] Attached SCSI disk
sd 4:0:0:0: Attached scsi generic sg2 type 0
ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 17
ata8: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 17
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt 0000:05:03.0[A] -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[febff000-febff7ff] Max Packet=[2048] IR/IT contexts=[8/8]
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: eth1: IPv4 over IEEE 1394 (fw-host0)
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
usb 2-2: configuration #1 chosen from 1 choice
sl811: driver sl811-hcd, 19 May 2005
ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c00000081db]
usb 8-1: new low speed USB device using uhci_hcd and address 2
usb 8-1: configuration #1 chosen from 1 choice
usb 8-2: new low speed USB device using uhci_hcd and address 3
usb 8-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int64x1 2262 MB/s
raid6: int64x2 2851 MB/s
raid6: int64x4 2726 MB/s
raid6: int64x8 2208 MB/s
raid6: sse2x1 3877 MB/s
raid6: sse2x2 4417 MB/s
raid6: sse2x4 7250 MB/s
raid6: using algorithm sse2x4 (7250 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 284k freed
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
phy0: Selected rate control algorithm 'pid'
phy0: hwaddr 00:15:af:3e:d3:5b, rtl8187 V1 + rtl8225z2
usbcore: registered new interface driver rtl8187
scsi 8:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 8:0:0:0: [sdc] 2006673 512-byte hardware sectors (1027 MB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sd 8:0:0:0: [sdc] 2006673 512-byte hardware sectors (1027 MB)
sd 8:0:0:0: [sdc] Write Protect is off
sd 8:0:0:0: [sdc] Mode Sense: 03 00 00 00
sd 8:0:0:0: [sdc] Assuming drive cache: write through
sdc: sdc1
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:0: Attached scsi generic sg3 type 0
usb-storage: device scan complete
[-- Attachment #12: 64-ide-iomem --]
[-- Type: application/octet-stream, Size: 1668 bytes --]
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000c0000-000cffff : pnp 00:0d
000e4000-000fffff : reserved
00100000-cff7ffff : System RAM
00200000-007d271b : Kernel code
007d271c-00ad758f : Kernel data
00b28000-00b93147 : Kernel bss
cff80000-cff8dfff : ACPI Tables
cff8e000-cffdffff : ACPI Non-volatile Storage
cffe0000-cfffffff : reserved
d0000000-dfffffff : PCI Bus 0000:01
d0000000-dfffffff : 0000:01:00.0
e0000000-efffffff : PCI MMCONFIG 0
e0000000-efffffff : pnp 00:0c
f8f00000-f8ffffff : PCI Bus 0000:04
f9ff8000-f9ffbfff : 0000:00:1b.0
f9ff8000-f9ffbfff : ICH HD audio
f9fff400-f9fff4ff : 0000:00:1f.3
f9fff800-f9fffbff : 0000:00:1d.7
f9fff800-f9fffbff : ehci_hcd
f9fffc00-f9ffffff : 0000:00:1a.7
f9fffc00-f9ffffff : ehci_hcd
fa000000-fe8fffff : PCI Bus 0000:01
fa000000-fbffffff : 0000:01:00.0
fd000000-fdffffff : 0000:01:00.0
fe8e0000-fe8fffff : 0000:01:00.0
fe900000-fe9fffff : PCI Bus 0000:02
fe9c0000-fe9dffff : 0000:02:00.0
fe9fc000-fe9fffff : 0000:02:00.0
fe9fc000-fe9fffff : sky2
fea00000-feafffff : PCI Bus 0000:03
feae0000-feaeffff : 0000:03:00.0
feafe000-feafffff : 0000:03:00.0
feafe000-feafffff : ahci
feb00000-febfffff : PCI Bus 0000:05
febff000-febfffff : 0000:05:03.0
febff000-febff7ff : ohci1394
fec00000-fec00fff : IOAPIC 0
fec00000-fec00fff : pnp 00:0a
fed00000-fed003ff : HPET 0
fed14000-fed19fff : pnp 00:01
fed1c000-fed1ffff : pnp 00:07
fed20000-fed3ffff : pnp 00:07
fed50000-fed8ffff : pnp 00:07
fee00000-fee00fff : Local APIC
fee00000-fee00fff : reserved
ffa00000-ffafffff : pnp 00:07
ffb00000-ffbfffff : pnp 00:07
ffe00000-ffffffff : reserved
100000000-22fffffff : System RAM
[-- Attachment #13: 64-ide-ioports --]
[-- Type: application/octet-stream, Size: 1989 bytes --]
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0064-0064 : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide_generic
01f0-01f7 : ide_generic
0290-0297 : pnp 00:06
0376-0376 : ide_generic
03c0-03df : vga+
03f6-03f6 : ide_generic
03f8-03ff : serial
0400-041f : 0000:00:1f.3
0480-04bf : 0000:00:1f.0
0480-04bf : pnp 00:07
04d0-04d1 : pnp 00:07
0800-087f : 0000:00:1f.0
0800-087f : pnp 00:07
0800-0803 : ACPI PM1a_EVT_BLK
0804-0805 : ACPI PM1a_CNT_BLK
0808-080b : ACPI PM_TMR
0810-0815 : ACPI CPU throttle
0820-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
9400-940f : 0000:00:1f.2
9400-940f : ata_piix
9480-948f : 0000:00:1f.2
9480-948f : ata_piix
9800-9803 : 0000:00:1f.2
9800-9803 : ata_piix
9880-9887 : 0000:00:1f.2
9880-9887 : ata_piix
9c00-9c03 : 0000:00:1f.2
9c00-9c03 : ata_piix
a000-a007 : 0000:00:1f.2
a000-a007 : ata_piix
a400-a40f : 0000:00:1f.5
a400-a40f : ata_piix
a480-a48f : 0000:00:1f.5
a480-a48f : ata_piix
a800-a803 : 0000:00:1f.5
a800-a803 : ata_piix
a880-a887 : 0000:00:1f.5
a880-a887 : ata_piix
ac00-ac03 : 0000:00:1f.5
ac00-ac03 : ata_piix
b000-b007 : 0000:00:1f.5
b000-b007 : ata_piix
b080-b09f : 0000:00:1d.0
b080-b09f : uhci_hcd
b400-b41f : 0000:00:1d.1
b400-b41f : uhci_hcd
b480-b49f : 0000:00:1d.2
b480-b49f : uhci_hcd
b800-b81f : 0000:00:1a.0
b800-b81f : uhci_hcd
b880-b89f : 0000:00:1a.1
b880-b89f : uhci_hcd
bc00-bc1f : 0000:00:1a.2
bc00-bc1f : uhci_hcd
c000-cfff : PCI Bus 0000:01
cc00-cc7f : 0000:01:00.0
d000-dfff : PCI Bus 0000:02
d800-d8ff : 0000:02:00.0
d800-d8ff : sky2
e000-efff : PCI Bus 0000:03
e400-e40f : 0000:03:00.1
e400-e40f : pata_jmicron
e480-e483 : 0000:03:00.1
e480-e483 : pata_jmicron
e800-e807 : 0000:03:00.1
e800-e807 : pata_jmicron
e880-e883 : 0000:03:00.1
e880-e883 : pata_jmicron
ec00-ec07 : 0000:03:00.1
ec00-ec07 : pata_jmicron
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-08-30 19:42 ` xerces8
@ 2008-09-01 9:13 ` Tejun Heo
2008-09-01 10:40 ` xerces8
2008-09-06 18:12 ` xerces8
0 siblings, 2 replies; 13+ messages in thread
From: Tejun Heo @ 2008-09-01 9:13 UTC (permalink / raw)
To: xerces8; +Cc: linux-ide, Jeff Garzik, stein
[-- Attachment #1: Type: text/plain, Size: 485 bytes --]
xerces8 wrote:
>> This looks like resource conflict to me, which could have resulted
>> from ahci trying to grab all resources. Can you please post the
>> result of "cat /proc/ioports" and "cat /proc/iomem"?
>
> I noticed that in IDE mode the same happens (32bit kernel has problems,
> 64bit kernel has not), so here is dmesg, iomem and ioports for all 4
> combinations.
Can you please try the attached debug patch and report boot log. All
resources look fine.
Thanks.
--
tejun
[-- Attachment #2: debug --]
[-- Type: text/plain, Size: 1872 bytes --]
---
drivers/ata/ahci.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
Index: tree0/drivers/ata/ahci.c
===================================================================
--- tree0.orig/drivers/ata/ahci.c
+++ tree0/drivers/ata/ahci.c
@@ -2240,8 +2240,10 @@ static int ahci_init_one(struct pci_dev
/* acquire resources */
rc = pcim_enable_device(pdev);
- if (rc)
+ if (rc) {
+ dev_printk(KERN_WARNING, &pdev->dev, "pcim_enable_device failed %d\n", rc);
return rc;
+ }
/* AHCI controllers often implement SFF compatible interface.
* Grab all PCI BARs just in case.
@@ -2249,8 +2251,10 @@ static int ahci_init_one(struct pci_dev
rc = pcim_iomap_regions_request_all(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
if (rc == -EBUSY)
pcim_pin_device(pdev);
- if (rc)
+ if (rc) {
+ dev_printk(KERN_WARNING, &pdev->dev, "pcim_iomap_regions_request_all() failed %d\n", rc);
return rc;
+ }
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == 0x2652 || pdev->device == 0x2653)) {
@@ -2324,19 +2328,26 @@ static int ahci_init_one(struct pci_dev
/* initialize adapter */
rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
- if (rc)
+ if (rc) {
+ dev_printk(KERN_WARNING, &pdev->dev, "ahci_configure_dma_masks() failed %d\n", rc);
return rc;
+ }
rc = ahci_reset_controller(host);
- if (rc)
+ if (rc) {
+ dev_printk(KERN_WARNING, &pdev->dev, "ahci_reset_controller() failed %d\n", rc);
return rc;
+ }
ahci_init_controller(host);
ahci_print_info(host);
pci_set_master(pdev);
- return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
+ rc = ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
&ahci_sht);
+ if (rc)
+ dev_printk(KERN_WARNING, &pdev->dev, "ahci_host_activate() failed %d\n", rc);
+ return rc;
}
static int __init ahci_init(void)
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-09-01 9:13 ` Tejun Heo
@ 2008-09-01 10:40 ` xerces8
2008-09-06 18:12 ` xerces8
1 sibling, 0 replies; 13+ messages in thread
From: xerces8 @ 2008-09-01 10:40 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide, Jeff Garzik
Tejun Heo <tj@kernel.org> wrote:
> xerces8 wrote:
> >> This looks like resource conflict to me, which could have resulted
> >> from ahci trying to grab all resources. Can you please post the
> >> result of "cat /proc/ioports" and "cat /proc/iomem"?
> >
> > I noticed that in IDE mode the same happens (32bit kernel has problems,
> > 64bit kernel has not), so here is dmesg, iomem and ioports for all 4
> > combinations.
>
> Can you please try the attached debug patch and report boot log. All
> resources look fine.
(removing stein@hermes.si from CC, that is my other email address)
Hi!
I am away from home and will try the patch probably on Friday.
Until then thanks for your support!
David
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-09-01 9:13 ` Tejun Heo
2008-09-01 10:40 ` xerces8
@ 2008-09-06 18:12 ` xerces8
2008-09-06 21:31 ` xerces8
1 sibling, 1 reply; 13+ messages in thread
From: xerces8 @ 2008-09-06 18:12 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide, Jeff Garzik, stein
[-- Attachment #1: Type: text/plain, Size: 601 bytes --]
Tejun Heo wrote:
> xerces8 wrote:
> >> This looks like resource conflict to me, which could have resulted
> >> from ahci trying to grab all resources. Can you please post the
> >> result of "cat /proc/ioports" and "cat /proc/iomem"?
> >
> > I noticed that in IDE mode the same happens (32bit kernel has problems,
> > 64bit kernel has not), so here is dmesg, iomem and ioports for all 4
> > combinations.
>
> Can you please try the attached debug patch and report boot log. All
> resources look fine.
Hi!
(I was away during the week)
I run the patch and the result is attached.
Regards,
David
[-- Attachment #2: dmesg.debug --]
[-- Type: application/octet-stream, Size: 15427 bytes --]
r: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 75924k freed
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
fuse init (API version 7.9)
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with security attributes, realtime, large block numbers, no debug enabled
msgmni has been set to 1708
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered (default)
pci 0000:01:00.0: Boot video device
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CFF8E0D0, 01D2 (r1 AMI CPU1PM 1 INTL 20060113)
ACPI: ACPI0007:00 is registered as cooling_device0
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.0.8-k2
Copyright (c) 2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.3.18-k2
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k4
Copyright (c) 1999-2006 Intel Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum
pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ThunderLAN driver v1.15
TLAN: 0 devices installed, PCI: 0 EISA: 0
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:00.0 to 64
sky2 0000:02:00.0: v1.21 addr 0xfe9fc000 irq 10 Yukon-EC Ultra (0xb4) rev 2
sky2 eth0: addr 00:1e:8c:07:41:53
cs89x0:cs89x0_probe(0x0)
PP_addr at 300[a]: 0xffff
eth1: incorrect signature at 300[c]: 0xffff!=0x630E
PP_addr at 320[a]: 0xffff
eth1: incorrect signature at 320[c]: 0xffff!=0x630E
PP_addr at 340[a]: 0xffff
eth1: incorrect signature at 340[c]: 0xffff!=0x630E
PP_addr at 360[a]: 0xffff
eth1: incorrect signature at 360[c]: 0xffff!=0x630E
PP_addr at 200[a]: 0xffff
eth1: incorrect signature at 200[c]: 0xffff!=0x630E
PP_addr at 220[a]: 0xffff
eth1: incorrect signature at 220[c]: 0xffff!=0x630E
PP_addr at 240[a]: 0xffff
eth1: incorrect signature at 240[c]: 0xffff!=0x630E
PP_addr at 260[a]: 0xffff
eth1: incorrect signature at 260[c]: 0xffff!=0x630E
PP_addr at 280[a]: 0xffff
eth1: incorrect signature at 280[c]: 0xffff!=0x630E
PP_addr at 2a0[a]: 0xffff
eth1: incorrect signature at 2a0[c]: 0xffff!=0x630E
PP_addr at 2c0[a]: 0xffff
eth1: incorrect signature at 2c0[c]: 0xffff!=0x630E
PP_addr at 2e0[a]: 0xffff
eth1: incorrect signature at 2e0[c]: 0xffff!=0x630E
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
eth%d: i82596 initialization timed out
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ahci 0000:00:1f.2: ahci_host_activate() failed -16
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ahci: probe of 0000:00:1f.2 failed with error -16
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 11
ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 11
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:03:00.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata3: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 10
ata4: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 10
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 14
PCI: setting IRQ 14 as level-triggered
ACPI: PCI Interrupt 0000:05:03.0[A] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
ohci1394: Failed to allocate interrupt 14
ohci1394: probe of 0000:05:03.0 failed with error -12
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: Cannot register CSR space
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 5, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 7, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 11, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 3, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 5, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: request interrupt 14 failed
uhci_hcd 0000:00:1d.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -16
uhci_hcd: probe of 0000:00:1d.1 failed with error -16
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000b480
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
sl811: driver sl811-hcd, 19 May 2005
usb 2-2: configuration #1 chosen from 1 choice
usb 7-1: new low speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 960 MB/s
raid6: int32x2 906 MB/s
raid6: int32x4 780 MB/s
raid6: int32x8 702 MB/s
raid6: mmxx1 3093 MB/s
raid6: mmxx2 3535 MB/s
raid6: sse1x1 2108 MB/s
raid6: sse1x2 2728 MB/s
raid6: sse2x1 3768 MB/s
raid6: sse2x2 4307 MB/s
raid6: using algorithm sse2x2 (4307 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
padlock: VIA PadLock not detected.
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 300k freed
scsi 6:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 6:0:0:0: [sda] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-09-06 18:12 ` xerces8
@ 2008-09-06 21:31 ` xerces8
2008-09-08 11:35 ` Tejun Heo
0 siblings, 1 reply; 13+ messages in thread
From: xerces8 @ 2008-09-06 21:31 UTC (permalink / raw)
To: xerces8, Tejun Heo; +Cc: linux-ide, Jeff Garzik, stein
[-- Attachment #1: Type: text/plain, Size: 896 bytes --]
xerces8 wrote:
> Tejun Heo wrote:
>
> > xerces8 wrote:
> > >> This looks like resource conflict to me, which could have resulted
> > >> from ahci trying to grab all resources. Can you please post the
> > >> result of "cat /proc/ioports" and "cat /proc/iomem"?
> > >
> > > I noticed that in IDE mode the same happens (32bit kernel has problems,
> > > 64bit kernel has not), so here is dmesg, iomem and ioports for all 4
> > > combinations.
> >
> > Can you please try the attached debug patch and report boot log. All
> > resources look fine.
>
> Hi!
>
> (I was away during the week)
>
> I run the patch and the result is attached.
I put more debug in the function that failed and tracked the problem down to setup_irq().
I also enabled CONFIG_DEBUG_SHIRQ. The kernel messages are attached.
Regards,
David
PS: I will leave on Sunday evening, so if you have questions, ask the soon ;-)
[-- Attachment #2: dmesg3 --]
[-- Type: application/octet-stream, Size: 15394 bytes --]
at 2e0[c]: 0xffff!=0x630E
cs89x0: no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
eth%d: i82596 initialization timed out
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide-floppy driver 1.00
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
Emulex LightPulse Fibre Channel SCSI driver 8.2.6
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.20-rc1 Mon. March 10 11:02:31 PDT 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080224, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
osst :I: Tape driver with OnStream support version 0.99.4
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Driver 'osst' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 15
PCI: setting IRQ 15 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[B] -> Link [LNKG] -> GSI 15 (level, low) -> IRQ 15
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
IRQ handler type mismatch for IRQ 15
current handler: ide1
Pid: 1, comm: swapper Not tainted 2.6.26.3 #1
[<c012eb3f>] setup_irq+0x198/0x1b7
[<c012eb46>] setup_irq+0x19f/0x1b7
[<c0507849>] ahci_interrupt+0x0/0x3e2
[<c012ebf3>] request_irq+0x95/0xb2
[<c0507849>] ahci_interrupt+0x0/0x3e2
[<c012f732>] devm_request_irq+0x50/0x86
[<c04fabcb>] ata_host_activate+0x6a/0xb1
[<c05077f4>] ahci_init_one+0x828/0x855
[<c02c9cd3>] pci_device_probe+0x36/0x55
[<c030cf7e>] driver_probe_device+0x9c/0x112
[<c030d02b>] __driver_attach+0x37/0x55
[<c030c890>] bus_for_each_dev+0x31/0x52
[<c030ce32>] driver_attach+0x11/0x13
[<c030cff4>] __driver_attach+0x0/0x55
[<c030cbe2>] bus_add_driver+0x91/0x193
[<c0912d64>] ahci_init+0x0/0x11
[<c030d181>] driver_register+0x6d/0xc2
[<c0912d64>] ahci_init+0x0/0x11
[<c02c9e67>] __pci_register_driver+0x2b/0x58
[<c08ea574>] kernel_init+0x0/0x1b2
[<c08ea5f2>] kernel_init+0x7e/0x1b2
[<c0112937>] schedule_tail+0xe/0x39
[<c0103586>] ret_from_fork+0x6/0x20
[<c08ea574>] kernel_init+0x0/0x1b2
[<c08ea574>] kernel_init+0x0/0x1b2
[<c0103a47>] kernel_thread_helper+0x7/0x10
=======================
setup_irq : failing with EBUSY
devm_request_irq: request_irq failed with -16
ACPI: PCI interrupt for device 0000:00:1f.2 disabled
ahci: probe of 0000:00:1f.2 failed with error -16
ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
PCI: Setting latency timer of device 0000:03:00.0 to 64
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe100 irq 11
ata2: SATA max UDMA/133 abar m8192@0xfeafe000 port 0xfeafe180 irq 11
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ACPI: PCI Interrupt 0000:03:00.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:03:00.1 to 64
scsi4 : pata_jmicron
scsi5 : pata_jmicron
ata3: PATA max UDMA/100 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 10
ata4: PATA max UDMA/100 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 10
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 14
PCI: setting IRQ 14 as level-triggered
ACPI: PCI Interrupt 0000:05:03.0[A] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
IRQ handler type mismatch for IRQ 14
current handler: ide0
Pid: 1, comm: swapper Not tainted 2.6.26.3 #1
[<c012eb3f>] setup_irq+0x198/0x1b7
[<c012eb46>] setup_irq+0x19f/0x1b7
[<c0535dfd>] ohci_irq_handler+0x0/0x62f
[<c012ebf3>] request_irq+0x95/0xb2
[<c065834e>] ohci1394_pci_probe+0x392/0x49a
[<c02c9cd3>] pci_device_probe+0x36/0x55
[<c030cf7e>] driver_probe_device+0x9c/0x112
[<c030d02b>] __driver_attach+0x37/0x55
[<c030c890>] bus_for_each_dev+0x31/0x52
[<c030ce32>] driver_attach+0x11/0x13
[<c030cff4>] __driver_attach+0x0/0x55
[<c030cbe2>] bus_add_driver+0x91/0x193
[<c091442a>] ohci1394_init+0x0/0x11
[<c030d181>] driver_register+0x6d/0xc2
[<c052fe83>] nodemgr_for_each_host+0x1b/0x1e
[<c091442a>] ohci1394_init+0x0/0x11
[<c02c9e67>] __pci_register_driver+0x2b/0x58
[<c08ea574>] kernel_init+0x0/0x1b2
[<c08ea5f2>] kernel_init+0x7e/0x1b2
[<c0112937>] schedule_tail+0xe/0x39
[<c0103586>] ret_from_fork+0x6/0x20
[<c08ea574>] kernel_init+0x0/0x1b2
[<c08ea574>] kernel_init+0x0/0x1b2
[<c0103a47>] kernel_thread_helper+0x7/0x10
=======================
setup_irq : failing with EBUSY
ohci1394: Failed to allocate interrupt 14
ohci1394: probe of 0000:05:03.0 failed with error -12
ieee1394: raw1394: /dev/raw1394 device initialized
eth1394: Cannot register CSR space
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 5, io mem 0xf9fffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
PCI: setting IRQ 7 as level-triggered
ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 7, io mem 0xf9fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 11, io base 0x0000b800
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:1a.1[B] -> Link [LNKF] -> GSI 3 (level, low) -> IRQ 3
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 3, io base 0x0000b880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-3: new high speed USB device using ehci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1a.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1a.2 to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 5, io base 0x0000bc00
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
usb 1-3: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 7 (level, low) -> IRQ 7
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 7, io base 0x0000b080
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 14 (level, low) -> IRQ 14
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
IRQ handler type mismatch for IRQ 14
current handler: ide0
Pid: 1, comm: swapper Not tainted 2.6.26.3 #1
[<c012eb3f>] setup_irq+0x198/0x1b7
[<c012eb46>] setup_irq+0x19f/0x1b7
[<c02c149a>] delay_tsc+0x10/0x1d
[<c054473d>] usb_hcd_irq+0x0/0x57
[<c012ebf3>] request_irq+0x95/0xb2
[<c05449e4>] usb_add_hcd+0x22f/0x4f3
[<c054c541>] usb_hcd_pci_probe+0x1cd/0x254
[<c02c9cd3>] pci_device_probe+0x36/0x55
[<c030cf7e>] driver_probe_device+0x9c/0x112
[<c030d02b>] __driver_attach+0x37/0x55
[<c030c890>] bus_for_each_dev+0x31/0x52
[<c030ce32>] driver_attach+0x11/0x13
[<c030cff4>] __driver_attach+0x0/0x55
[<c030cbe2>] bus_add_driver+0x91/0x193
[<c09147cb>] uhci_hcd_init+0x0/0x80
[<c030d181>] driver_register+0x6d/0xc2
[<c09147cb>] uhci_hcd_init+0x0/0x80
[<c02c9e67>] __pci_register_driver+0x2b/0x58
[<c091482d>] uhci_hcd_init+0x62/0x80
[<c08ea574>] kernel_init+0x0/0x1b2
[<c08ea5f2>] kernel_init+0x7e/0x1b2
[<c0112937>] schedule_tail+0xe/0x39
[<c0103586>] ret_from_fork+0x6/0x20
[<c08ea574>] kernel_init+0x0/0x1b2
[<c08ea574>] kernel_init+0x0/0x1b2
[<c0103a47>] kernel_thread_helper+0x7/0x10
=======================
setup_irq : failing with EBUSY
uhci_hcd 0000:00:1d.1: request interrupt 14 failed
uhci_hcd 0000:00:1d.1: USB bus 7 deregistered
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
uhci_hcd 0000:00:1d.1: init 0000:00:1d.1 fail, -16
uhci_hcd: probe of 0000:00:1d.1 failed with error -16
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 5, io base 0x0000b480
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
usb 2-2: new high speed USB device using ehci_hcd and address 2
sl811: driver sl811-hcd, 19 May 2005
usb 2-2: configuration #1 chosen from 1 choice
usb 7-1: new low speed USB device using uhci_hcd and address 2
usb 7-1: configuration #1 chosen from 1 choice
usb 7-2: new low speed USB device using uhci_hcd and address 3
usb 7-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usblcd
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 959 MB/s
raid6: int32x2 905 MB/s
raid6: int32x4 780 MB/s
raid6: int32x8 701 MB/s
raid6: mmxx1 3098 MB/s
raid6: mmxx2 3537 MB/s
raid6: sse1x1 2108 MB/s
raid6: sse1x2 2730 MB/s
raid6: sse2x1 3765 MB/s
raid6: sse2x2 4304 MB/s
raid6: using algorithm sse2x2 (4304 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
device-mapper: multipath round-robin: version 1.0.0 loaded
device-mapper: multipath emc: version 0.0.3 loaded
cpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
padlock: VIA PadLock not detected.
usbcore: registered new interface driver hiddev
input: CHICONY USB Keyboard as /class/input/input2
input: USB HID v1.10 Keyboard [CHICONY USB Keyboard] on usb-0000:00:1d.2-1
input: CHESEN PS2 to USB Converter as /class/input/input3
input: USB HID v1.10 Keyboard [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
input: CHESEN PS2 to USB Converter as /class/input/input4
input: USB HID v1.10 Mouse [CHESEN PS2 to USB Converter] on usb-0000:00:1d.2-2
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Using IPI Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
Freeing unused kernel memory: 300k freed
scsi 6:0:0:0: Direct-Access SanDisk U3 Titanium 2.18 PQ: 0 ANSI: 2
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sd 6:0:0:0: [sda] 2006673 512-byte hardware sectors (1027 MB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sda] Assuming drive cache: write through
sda: sda1
sd 6:0:0:0: [sda] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-09-06 21:31 ` xerces8
@ 2008-09-08 11:35 ` Tejun Heo
2008-09-08 11:43 ` xerces8
0 siblings, 1 reply; 13+ messages in thread
From: Tejun Heo @ 2008-09-08 11:35 UTC (permalink / raw)
To: xerces8; +Cc: linux-ide, Jeff Garzik, stein
xerces8 wrote:
> I put more debug in the function that failed and tracked the problem down to setup_irq().
> I also enabled CONFIG_DEBUG_SHIRQ. The kernel messages are attached.
Aieee... please disable ide-generic.
--
tejun
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-09-08 11:35 ` Tejun Heo
@ 2008-09-08 11:43 ` xerces8
2008-09-08 11:54 ` Tejun Heo
0 siblings, 1 reply; 13+ messages in thread
From: xerces8 @ 2008-09-08 11:43 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide, Jeff Garzik, stein
Tejun Heo wrote:
> xerces8 wrote:
> > I put more debug in the function that failed and tracked the problem down to setup_irq().
> > I also enabled CONFIG_DEBUG_SHIRQ. The kernel messages are attached.
>
> Aieee... please disable ide-generic.
(you mean CONFIG_IDE_GENERIC, right ?)
Can you elaborate ?
Is this some bug ?
I can't just a tell distro owner to change a kernel build option
because someone told me to :-)
(remember, this is a problem with the kernel of RIPLinux, a small recovery live CD)
Regards,
David
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-09-08 11:43 ` xerces8
@ 2008-09-08 11:54 ` Tejun Heo
2008-09-12 7:53 ` xerces8
0 siblings, 1 reply; 13+ messages in thread
From: Tejun Heo @ 2008-09-08 11:54 UTC (permalink / raw)
To: xerces8; +Cc: linux-ide, Jeff Garzik, stein
xerces8 wrote:
> Tejun Heo wrote:
>
>> xerces8 wrote:
>>> I put more debug in the function that failed and tracked the problem down to setup_irq().
>>> I also enabled CONFIG_DEBUG_SHIRQ. The kernel messages are attached.
>> Aieee... please disable ide-generic.
>
> (you mean CONFIG_IDE_GENERIC, right ?)
>
> Can you elaborate ?
> Is this some bug ?
>
> I can't just a tell distro owner to change a kernel build option
> because someone told me to :-) (remember, this is a problem with the
> kernel of RIPLinux, a small recovery live CD)
Enabling generic by default is a bad bad bad bad bad bad bad idea. It
just grabs legacy IO ports and interrupts and doesn't wanna share
them. Under some configurations, it used to cause two drivers to be
attached to the same device triggering weird problems, which shouldn't
happen anymore, but it still can prevent proper drivers from acquiring
the resources. In your case, USB host controller was also assigned to
the same IRQ and failed to initialize IRQ. It just can't play nice
with modern devices and drivers.
--
tejun
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Intel AHCI ICH9R not detecting devices
2008-09-08 11:54 ` Tejun Heo
@ 2008-09-12 7:53 ` xerces8
2008-09-12 8:38 ` [PATCH] ide: note that IDE generic may prevent other drivers from attaching Tejun Heo
0 siblings, 1 reply; 13+ messages in thread
From: xerces8 @ 2008-09-12 7:53 UTC (permalink / raw)
To: Tejun Heo; +Cc: linux-ide, Jeff Garzik, stein
Tejun Heo wrote:
> xerces8 wrote:
> > Tejun Heo wrote:
> >
> >> xerces8 wrote:
> >>> I put more debug in the function that failed and tracked the problem down to setup_irq().
> >>> I also enabled CONFIG_DEBUG_SHIRQ. The kernel messages are attached.
> >> Aieee... please disable ide-generic.
> >
> > (you mean CONFIG_IDE_GENERIC, right ?)
> >
> > Can you elaborate ?
> > Is this some bug ?
> >
> > I can't just a tell distro owner to change a kernel build option
> > because someone told me to :-) (remember, this is a problem with the
> > kernel of RIPLinux, a small recovery live CD)
>
> Enabling generic by default is a bad bad bad bad bad bad bad idea. It
> just grabs legacy IO ports and interrupts and doesn't wanna share
> them. Under some configurations, it used to cause two drivers to be
> attached to the same device triggering weird problems, which shouldn't
> happen anymore, but it still can prevent proper drivers from acquiring
> the resources. In your case, USB host controller was also assigned to
> the same IRQ and failed to initialize IRQ. It just can't play nice
> with modern devices and drivers.
Maybe a summary of this should be added as a help for the CONFIG_IDE_GENERIC option ?
Regards,
David
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH] ide: note that IDE generic may prevent other drivers from attaching
2008-09-12 7:53 ` xerces8
@ 2008-09-12 8:38 ` Tejun Heo
2008-09-27 17:13 ` Bartlomiej Zolnierkiewicz
0 siblings, 1 reply; 13+ messages in thread
From: Tejun Heo @ 2008-09-12 8:38 UTC (permalink / raw)
To: xerces8, Bartlomiej Zolnierkiewicz; +Cc: linux-ide, Jeff Garzik, stein
Enabling IDE generic may prevent ATA controllers located on legacy
ports from being attached to more proper driver or can prevent other
controllers which share the IRQ from working. Note it in the help
message.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
drivers/ide/Kconfig | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index fc735ab..5e5b2d3 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -292,6 +292,20 @@ config IDE_GENERIC
tristate "generic/default IDE chipset support"
depends on ALPHA || X86 || IA64 || M32R || MIPS
help
+ This is the generic IDE driver. This driver attaches to the
+ fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
+ so on). Please note that if this driver is built into the
+ kernel or loaded before other ATA (IDE or libata) drivers
+ and the controller is located at legacy ports, this driver
+ will grab those ports and thus can prevent the controller
+ specific driver from attaching.
+
+ Also, currently, IDE generic doesn't allow IRQ sharing
+ meaning that the IRQs it grabs won't be available to other
+ controllers sharing those IRQs which usually makes drivers
+ for those controllers fail. Generally, it's not a good idea
+ to load IDE generic driver on modern systems.
+
If unsure, say N.
config BLK_DEV_PLATFORM
^ permalink raw reply related [flat|nested] 13+ messages in thread
* Re: [PATCH] ide: note that IDE generic may prevent other drivers from attaching
2008-09-12 8:38 ` [PATCH] ide: note that IDE generic may prevent other drivers from attaching Tejun Heo
@ 2008-09-27 17:13 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 13+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2008-09-27 17:13 UTC (permalink / raw)
To: Tejun Heo; +Cc: xerces8, linux-ide, Jeff Garzik, stein
On Friday 12 September 2008, Tejun Heo wrote:
> Enabling IDE generic may prevent ATA controllers located on legacy
> ports from being attached to more proper driver or can prevent other
> controllers which share the IRQ from working. Note it in the help
> message.
>
> Signed-off-by: Tejun Heo <tj@kernel.org>
applied
> ---
> drivers/ide/Kconfig | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
> index fc735ab..5e5b2d3 100644
> --- a/drivers/ide/Kconfig
> +++ b/drivers/ide/Kconfig
> @@ -292,6 +292,20 @@ config IDE_GENERIC
> tristate "generic/default IDE chipset support"
> depends on ALPHA || X86 || IA64 || M32R || MIPS
> help
> + This is the generic IDE driver. This driver attaches to the
> + fixed legacy ports (e.g. on PCs 0x1f0/0x170, 0x1e8/0x168 and
> + so on). Please note that if this driver is built into the
> + kernel or loaded before other ATA (IDE or libata) drivers
> + and the controller is located at legacy ports, this driver
> + will grab those ports and thus can prevent the controller
> + specific driver from attaching.
s/will grab/may grab/ since Borislav has fixed PCI-case for .28
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2008-09-27 17:29 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-08-22 15:29 Intel AHCI ICH9R not detecting devices xerces8
2008-08-30 10:40 ` Tejun Heo
2008-08-30 19:42 ` xerces8
2008-09-01 9:13 ` Tejun Heo
2008-09-01 10:40 ` xerces8
2008-09-06 18:12 ` xerces8
2008-09-06 21:31 ` xerces8
2008-09-08 11:35 ` Tejun Heo
2008-09-08 11:43 ` xerces8
2008-09-08 11:54 ` Tejun Heo
2008-09-12 7:53 ` xerces8
2008-09-12 8:38 ` [PATCH] ide: note that IDE generic may prevent other drivers from attaching Tejun Heo
2008-09-27 17:13 ` Bartlomiej Zolnierkiewicz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).