Tejun Heo wrote:
> Damazy wrote:
>> Error 190 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
>>   When the command that caused the error occurred, the device was active
>> or idle.
> 
> The time record seems screwed.
> 
>>   After command completion occurred, registers were:
>>   ER ST SC SN CL CH DH
>>   -- -- -- -- -- -- --
>>   84 51 3f 00 ee 1d e0  Error: ICRC, ABRT 63 sectors at LBA = 0x001dee00
>> = 1961472
> 
> But the recorded error is consistent with the kernel messages.  It
> looks like you're suffering serious transmission problem over the SATA
> cable.  Those transmission errors appear as timeouts or when the drive
> detects it ABRTs w/ ICRC.  Please check cable, power and try to
> connect the drive to other ports.
> 
> Thanks.
> 

I'v already try several cable and external power supply, but with the 
same result.
This sata chip have only two sata port. If I connect to other one, 
errors still appear.
I don't know what can I do else.
The only thing works fine is when I copy something from disk connected 
to my Intel 82801DB (ICH4).

TIA