* sata_sil for 3512A chip on kernel 2.6.26.3
@ 2008-10-02 8:53 Damazy
2008-10-04 7:39 ` Tejun Heo
0 siblings, 1 reply; 10+ messages in thread
From: Damazy @ 2008-10-02 8:53 UTC (permalink / raw)
To: jgarzik; +Cc: linux-ide
Hi.
I have big problem working with sata_sil.
If I plugin SAMSUNG HD502IJ to one of 3512A and try to copy anything
from that drive to the same one big partition is always hard resetting
link and stops responds for 5 sec.
first is always timeout
status DRDY
hard resetting link
next some times drive error or HSM violation
I know that drive is good because I'v check it in diffrent hardware and os.
I'v test my config with WD800 and its work perfect.
What can I do with that?
What more information I must send to proper diagnose the problem?
I'v read lots of information on web, but nothing helps at all.
The only way to stops this problem is disable DMA with libata.dma=0 but
performance of this solution unacceptable.
I'll be very thanfull for any help.
--
Kind regards.
Damazy
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: sata_sil for 3512A chip on kernel 2.6.26.3
2008-10-02 8:53 sata_sil for 3512A chip on kernel 2.6.26.3 Damazy
@ 2008-10-04 7:39 ` Tejun Heo
2008-10-14 10:49 ` Damazy
0 siblings, 1 reply; 10+ messages in thread
From: Tejun Heo @ 2008-10-04 7:39 UTC (permalink / raw)
To: Damazy; +Cc: jgarzik, linux-ide
Damazy wrote:
> Hi.
> I have big problem working with sata_sil.
> If I plugin SAMSUNG HD502IJ to one of 3512A and try to copy anything
> from that drive to the same one big partition is always hard resetting
> link and stops responds for 5 sec.
>
> first is always timeout
> status DRDY
> hard resetting link
>
> next some times drive error or HSM violation
>
> I know that drive is good because I'v check it in diffrent hardware and os.
>
> I'v test my config with WD800 and its work perfect.
> What can I do with that?
> What more information I must send to proper diagnose the problem?
> I'v read lots of information on web, but nothing helps at all.
> The only way to stops this problem is disable DMA with libata.dma=0 but
> performance of this solution unacceptable.
Please post full kernel log including the boot messages and error
messages.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: sata_sil for 3512A chip on kernel 2.6.26.3
2008-10-04 7:39 ` Tejun Heo
@ 2008-10-14 10:49 ` Damazy
2008-10-15 1:58 ` Tejun Heo
0 siblings, 1 reply; 10+ messages in thread
From: Damazy @ 2008-10-14 10:49 UTC (permalink / raw)
To: Tejun Heo; +Cc: jgarzik, linux-ide
Tejun Heo wrote:
> Please post full kernel log including the boot messages and error
> messages.
> Thanks.
Hello.
Thank you for your replay.
This is dmesg:
=======================================================
p : 0xfffa8000 - 0xfffff000 ( 348 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc03ae000 - 0xc03e5000 ( 220 kB)
.data : 0xc02f15e2 - 0xc03ab460 ( 743 kB)
.text : 0xc0100000 - 0xc02f15e2 (1989 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
Calibrating delay using timer specific routine.. 4849.79 BogoMIPS
(lpj=2424897)
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 07
Checking 'hlt' instruction... OK.
Freeing SMP alternatives: 0k freed
ACPI: Core revision 20080321
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
net_namespace: 484 bytes
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf1eb0, last bus=2
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
pci 0000:00:1f.0: Enabled i801 SMBus device
pci 0000:00:1f.0: quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region ec00-ec3f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
system 00:00: iomem range 0x0-0x9ffff could not be reserved
system 00:00: iomem range 0xf0000-0xfffff could not be reserved
system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:02: ioport range 0xe400-0xe47f has been reserved
system 00:02: ioport range 0xe800-0xe81f has been reserved
system 00:02: ioport range 0xec00-0xec3f has been reserved
system 00:02: ioport range 0x4d6-0x4d6 has been reserved
system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
system 00:03: ioport range 0x4d0-0x4d1 has been reserved
system 00:0c: ioport range 0x3f0-0x3f1 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 0xf7800000-0xf87fffff
PREFETCH window: 0x00000000f9f00000-0x00000000fbffffff
PCI: Bridge: 0000:00:1e.0
IO window: 9000-bfff
MEM window: 0xf5000000-0xf6ffffff
PREFETCH window: 0x00000000f8800000-0x00000000f9efffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Simple Boot Flag at 0x3a set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1223285079.155:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1767
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller (0x8086:0x24cb rev 0x01) at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007
ide1: BM-DMA at 0xf008-0xf00f
Probing IDE interface ide0...
hda: WDC WD800JB-00FSA0, ATA DISK drive
hdb: SAMSUNG SV1021H, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: HL-DT-STDVD-RAM GSA-H50L, ATAPI CD/DVD-ROM drive
hdd: HL-DT-STDVD-ROM GDR8162B, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/66 mode selected
hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdd: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=16383/255/63
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 > hda3
hdb: max request size: 128KiB
hdb: 19932192 sectors (10205 MB) w/426KiB Cache, CHS=19774/16/63
hdb: cache flushes not supported
hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 >
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 48X DVD-ROM drive, 256kB Cache
Driver 'sd' needs updating - please use bus_type methods
sata_sil 0000:02:0b.0: version 2.3
ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 23
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xf6000000 tf 0xf6000080 irq 23
ata2: SATA max UDMA/100 mmio m512@0xf6000000 tf 0xf60000c0 irq 23
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata1.00: HPA detected: current 976771055, native 976773168
ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01112, max UDMA7
ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
ata2.00: ATA-7: SAMSUNG HD502IJ, 1AA01112, max UDMA7
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 976771055 512-byte hardware sectors (500107 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD502IJ 1AA0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usbmon: debugfs is not available
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
cpuidle: using governor ladder
TCP cubic registered
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 220k freed
hdb: UDMA/100 mode selected
hda: UDMA/100 mode selected
Real Time Clock Driver v1.12ac
Adding 522072k swap on /dev/hda5. Priority:-1 extents:1 across:522072k
Initializing XFRM netlink socket
NET: Registered protocol family 17
IPv4 over IPv4 tunneling driver
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
Linux video capture interface: v2.00
lp0: using parport0 (interrupt-driven).
nbd: registered device at major 43
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ppdev: user-space parallel port driver
arp_tables: (C) 2002 David S. Miller
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
Linux agpgart interface v0.103
agpgart: Detected an Intel 845G Chipset.
agpgart: AGP aperture is 32M @ 0xfc000000
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized mga 3.2.1 20051102 on minor 0
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:02:0c.0[A] -> GSI 20 (level, low) -> IRQ 20
bttv0: Bt878 (rev 17) at 0000:02:0c.0, irq: 20, latency: 32, mmio:
0xf9000000
bttv0: using: Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco
MXTV-9578 CP [card=50,insmod option]
bttv0: gpio: en=00000000, out=00000000 in=00fbff10 [init]
bttv0: tuner type=5
bttv0: i2c: checking for Bt832 @ 0x88... not found
bttv0: i2c: checking for Bt832 @ 0x8a... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... found
tda7432 0-0045: chip found @ 0x8a (bt878 #0 [sw])
tuner' 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
input: bttv IR (card=50) as /class/input/input2
fuse init (API version 7.9)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0x9800, 00:05:1c:10:c8:ef, IRQ 21
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 18 (level, low) -> IRQ 18
eth1: RealTek RTL8139 at 0x9400, 00:50:ba:31:d3:36, IRQ 18
eth1: Identified 8139 chip type 'RTL-8139B'
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno@linux.intel.com>
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usb 3-2: new full speed USB device using uhci_hcd and address 2
usb 3-2: configuration #1 chosen from 1 choice
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 3-2.1: new low speed USB device using uhci_hcd and address 3
usb 3-2.1: configuration #1 chosen from 1 choice
input: Cellink Co., LTD. Wireless RF Mouse as /class/input/input3
input: USB HID v1.10 Mouse [Cellink Co., LTD. Wireless RF Mouse] on
usb-0000:00:1d.1-2.1
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 21 (level, low) -> IRQ 21
=======================================================
and this is kern.log with errors:
=======================================================
Oct 14 09:51:36 debian-stacja kernel: kjournald starting. Commit
interval 5 seconds
Oct 14 09:51:36 debian-stacja kernel: EXT3 FS on sdb1, internal journal
Oct 14 09:51:36 debian-stacja kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Oct 14 09:53:25 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:53:25 debian-stacja kernel: ata2.00: cmd
25/00:00:67:69:9e/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:53:25 debian-stacja kernel: res
40/00:00:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
Oct 14 09:53:25 debian-stacja kernel: ata2.00: status: { DRDY }
Oct 14 09:53:25 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:53:26 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:53:26 debian-stacja kernel: ata2.00: configured for UDMA/100
Oct 14 09:53:26 debian-stacja kernel: ata2: EH complete
Oct 14 09:53:26 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:53:26 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:53:26 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:53:26 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:54:55 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:54:55 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6d0009
Oct 14 09:54:55 debian-stacja kernel: ata2.00: cmd
25/00:00:47:01:95/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:54:55 debian-stacja kernel: res
51/04:af:98:01:95/00:00:24:00:00/e0 Emask 0x1 (device error)
Oct 14 09:54:55 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:54:55 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:54:55 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:54:55 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:54:55 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
Oct 14 09:55:00 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:55:01 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:55:01 debian-stacja kernel: ata2.00: configured for UDMA/100
Oct 14 09:55:01 debian-stacja kernel: ata2: EH complete
Oct 14 09:55:01 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:55:01 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:55:01 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:55:01 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:55:02 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:55:02 debian-stacja kernel: ata2.00: cmd
25/00:00:7f:a8:0b/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:55:02 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:55:02 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:55:02 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:55:02 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:55:02 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:55:02 debian-stacja kernel: ata2.00: configured for UDMA/100
Oct 14 09:55:02 debian-stacja kernel: ata2: EH complete
Oct 14 09:55:02 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:55:02 debian-stacja kernel: ata2.00: cmd
25/00:00:7f:a8:0b/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:55:02 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:55:02 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:55:02 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:55:02 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:55:02 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:55:02 debian-stacja kernel: ata2.00: configured for UDMA/100
Oct 14 09:55:02 debian-stacja kernel: ata2: EH complete
Oct 14 09:55:03 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:55:03 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:55:03 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:55:03 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:55:03 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:55:03 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:55:03 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:55:03 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:55:03 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:55:03 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6d0009
Oct 14 09:55:03 debian-stacja kernel: ata2.00: cmd
25/00:90:7f:b7:0b/00:00:24:00:00/e0 tag 0 dma 73728 in
Oct 14 09:55:03 debian-stacja kernel: res
51/04:3f:d0:b7:0b/00:00:24:00:00/e0 Emask 0x1 (device error)
Oct 14 09:55:03 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:55:03 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:55:03 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:55:03 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:55:03 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
Oct 14 09:55:08 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:55:08 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:55:08 debian-stacja kernel: ata2.00: configured for UDMA/100
Oct 14 09:55:08 debian-stacja kernel: ata2: EH complete
Oct 14 09:55:08 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:55:08 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:55:08 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:55:08 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:55:08 debian-stacja kernel: ata2.00: limiting speed to
UDMA/66:PIO4
Oct 14 09:55:08 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:55:08 debian-stacja kernel: ata2.00: cmd
25/00:00:cf:4c:90/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:55:08 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:55:08 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:55:08 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:55:08 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:55:09 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:55:09 debian-stacja kernel: ata2.00: configured for UDMA/66
Oct 14 09:55:09 debian-stacja kernel: ata2: EH complete
Oct 14 09:55:09 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:55:09 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:55:09 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:55:09 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:55:09 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:55:09 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6d0009
Oct 14 09:55:09 debian-stacja kernel: ata2.00: cmd
25/00:00:3f:11:bd/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:55:09 debian-stacja kernel: res
51/04:ef:50:11:bd/00:00:24:00:00/e0 Emask 0x1 (device error)
Oct 14 09:55:09 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:55:09 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:55:09 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:55:09 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:55:09 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
Oct 14 09:55:14 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:55:15 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:55:15 debian-stacja kernel: ata2.00: configured for UDMA/66
Oct 14 09:55:15 debian-stacja kernel: ata2: EH complete
Oct 14 09:55:15 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:55:15 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:55:15 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:55:15 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:55:15 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:55:15 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6d0009
Oct 14 09:55:15 debian-stacja kernel: ata2.00: cmd
25/00:00:7f:ab:c1/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:55:15 debian-stacja kernel: res
51/04:cf:b0:ab:c1/00:00:24:00:00/e0 Emask 0x1 (device error)
Oct 14 09:55:15 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:55:15 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:55:15 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:55:15 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:55:15 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
Oct 14 09:55:20 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:55:20 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:55:20 debian-stacja kernel: ata2.00: configured for UDMA/66
Oct 14 09:55:20 debian-stacja kernel: ata2: EH complete
Oct 14 09:55:20 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:55:20 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:55:20 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:55:20 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:55:51 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:55:51 debian-stacja kernel: ata2.00: cmd
25/00:00:4f:68:c1/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:55:51 debian-stacja kernel: res
40/00:cf:b0:ab:c1/00:00:24:00:00/e0 Emask 0x4 (timeout)
Oct 14 09:55:51 debian-stacja kernel: ata2.00: status: { DRDY }
Oct 14 09:55:51 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:55:51 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:55:51 debian-stacja kernel: ata2.00: configured for UDMA/66
Oct 14 09:55:51 debian-stacja kernel: ata2: EH complete
Oct 14 09:55:51 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:55:51 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:55:51 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:55:51 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:55:52 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:55:52 debian-stacja kernel: ata2.00: cmd
25/00:00:4f:6e:c1/00:02:24:00:00/e0 tag 0 dma 262144 in
Oct 14 09:55:52 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:55:52 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:55:52 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:55:52 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:55:52 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:55:52 debian-stacja kernel: ata2.00: configured for UDMA/66
Oct 14 09:55:52 debian-stacja kernel: ata2: EH complete
Oct 14 09:55:52 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:55:52 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:55:52 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:55:52 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:56:23 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:56:23 debian-stacja kernel: ata2.00: cmd
25/00:00:6f:e3:a3/00:02:24:00:00/e0 tag 0 dma 262144 in
Oct 14 09:56:23 debian-stacja kernel: res
40/00:00:01:4f:c2/ff:ff:ff:ff:ff/00 Emask 0x4 (timeout)
Oct 14 09:56:23 debian-stacja kernel: ata2.00: status: { DRDY }
Oct 14 09:56:23 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:56:23 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:56:23 debian-stacja kernel: ata2.00: configured for UDMA/66
Oct 14 09:56:23 debian-stacja kernel: ata2: EH complete
Oct 14 09:56:23 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:56:23 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:56:23 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:56:23 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:56:24 debian-stacja kernel: ata2.00: limiting speed to
UDMA/33:PIO4
Oct 14 09:56:24 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:56:24 debian-stacja kernel: ata2.00: cmd
25/00:00:bf:80:ae/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:56:24 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:56:24 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:56:24 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:56:24 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:56:25 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:56:25 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:56:25 debian-stacja kernel: ata2: EH complete
Oct 14 09:56:25 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:56:25 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:56:25 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:56:25 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:56:25 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:56:25 debian-stacja kernel: ata2.00: cmd
25/00:00:bf:8d:ae/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:56:25 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:56:25 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:56:25 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:56:25 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:56:25 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:56:25 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:56:25 debian-stacja kernel: ata2: EH complete
Oct 14 09:56:25 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:56:25 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:56:25 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:56:25 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:56:25 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:56:25 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6d0009
Oct 14 09:56:25 debian-stacja kernel: ata2.00: cmd
25/00:90:97:65:b1/00:00:24:00:00/e0 tag 0 dma 73728 in
Oct 14 09:56:25 debian-stacja kernel: res
51/04:7f:a8:65:b1/00:00:24:00:00/e0 Emask 0x1 (device error)
Oct 14 09:56:25 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:56:25 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:56:25 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:56:25 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:56:25 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
Oct 14 09:56:30 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:56:30 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:56:31 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:56:31 debian-stacja kernel: ata2: EH complete
Oct 14 09:56:31 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:56:31 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:56:31 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:56:31 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:57:01 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:57:01 debian-stacja kernel: ata2.00: cmd
25/00:00:27:89:07/00:01:25:00:00/e0 tag 0 dma 131072 in
Oct 14 09:57:01 debian-stacja kernel: res
40/00:7f:a8:65:b1/00:00:24:00:00/e0 Emask 0x4 (timeout)
Oct 14 09:57:01 debian-stacja kernel: ata2.00: status: { DRDY }
Oct 14 09:57:01 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:57:02 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:57:02 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:57:02 debian-stacja kernel: ata2: EH complete
Oct 14 09:57:02 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:57:02 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:57:02 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:57:02 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:57:05 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:57:05 debian-stacja kernel: ata2.00: cmd
25/00:00:a7:49:c5/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:57:05 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:57:05 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:57:05 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:57:05 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:57:05 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:57:05 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:57:05 debian-stacja kernel: ata2: EH complete
Oct 14 09:57:05 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:57:05 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:57:05 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:57:05 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:57:11 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:57:11 debian-stacja kernel: ata2.00: cmd
25/00:00:0f:2b:1e/00:01:25:00:00/e0 tag 0 dma 131072 in
Oct 14 09:57:11 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:57:11 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:57:11 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:57:11 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:57:12 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:57:12 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:57:12 debian-stacja kernel: ata2: EH complete
Oct 14 09:57:12 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:57:12 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:57:12 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:57:12 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:57:12 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:57:12 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6c0009
Oct 14 09:57:12 debian-stacja kernel: ata2.00: cmd
25/00:00:87:07:21/00:01:25:00:00/e0 tag 0 dma 131072 in
Oct 14 09:57:12 debian-stacja kernel: res
51/04:00:86:08:21/00:00:25:00:00/e0 Emask 0x1 (device error)
Oct 14 09:57:12 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:57:12 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:57:12 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:57:12 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:57:12 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
Oct 14 09:57:17 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:57:17 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:57:17 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:57:17 debian-stacja kernel: ata2: EH complete
Oct 14 09:57:17 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:57:17 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:57:17 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:57:17 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:57:18 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:57:18 debian-stacja kernel: ata2.00: cmd
25/00:00:1f:8f:d6/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:57:18 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:57:18 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:57:18 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:57:18 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:57:18 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:57:18 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:57:18 debian-stacja kernel: ata2: EH complete
Oct 14 09:57:18 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:57:18 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:57:18 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:57:18 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:57:21 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:57:21 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6d0009
Oct 14 09:57:21 debian-stacja kernel: ata2.00: cmd
25/00:00:1f:c0:d3/00:01:23:00:00/e0 tag 0 dma 131072 in
Oct 14 09:57:21 debian-stacja kernel: res
51/04:ef:30:c0:d3/00:00:23:00:00/e0 Emask 0x1 (device error)
Oct 14 09:57:21 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:57:21 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:57:21 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:57:21 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:57:21 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
Oct 14 09:57:26 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:57:26 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:57:26 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:57:26 debian-stacja kernel: ata2: EH complete
Oct 14 09:57:26 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:57:26 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:57:26 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:57:26 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:58:00 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:58:00 debian-stacja kernel: ata2.00: cmd
25/00:00:97:d9:d3/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:58:00 debian-stacja kernel: res
40/00:ef:30:c0:d3/00:00:23:00:00/e0 Emask 0x4 (timeout)
Oct 14 09:58:00 debian-stacja kernel: ata2.00: status: { DRDY }
Oct 14 09:58:00 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:58:00 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:58:00 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:58:00 debian-stacja kernel: ata2: EH complete
Oct 14 09:58:00 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:58:00 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:58:00 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:58:00 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:58:00 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:58:00 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6d0009
Oct 14 09:58:00 debian-stacja kernel: ata2.00: cmd
25/00:00:1f:2e:c3/00:01:23:00:00/e0 tag 0 dma 131072 in
Oct 14 09:58:00 debian-stacja kernel: res
51/04:bf:60:2e:c3/00:00:23:00:00/e0 Emask 0x1 (device error)
Oct 14 09:58:00 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:58:00 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:58:00 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:58:00 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:58:00 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
Oct 14 09:58:05 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:58:05 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:58:05 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:58:05 debian-stacja kernel: ata2: EH complete
Oct 14 09:58:05 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:58:05 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:58:05 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:58:05 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:58:07 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:58:07 debian-stacja kernel: ata2.00: cmd
25/00:90:0f:a1:3f/00:00:24:00:00/e0 tag 0 dma 73728 in
Oct 14 09:58:07 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:58:07 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:58:07 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:58:07 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:58:07 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:58:07 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:58:07 debian-stacja kernel: ata2: EH complete
Oct 14 09:58:07 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:58:07 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:58:07 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:58:07 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:58:38 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:58:38 debian-stacja kernel: ata2.00: cmd
25/00:00:3f:c5:a7/00:01:23:00:00/e0 tag 0 dma 131072 in
Oct 14 09:58:38 debian-stacja kernel: res
40/00:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x4 (timeout)
Oct 14 09:58:38 debian-stacja kernel: ata2.00: status: { DRDY }
Oct 14 09:58:38 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:58:38 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:58:38 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:58:38 debian-stacja kernel: ata2: EH complete
Oct 14 09:58:38 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:58:38 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:58:38 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:58:38 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:59:09 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:59:09 debian-stacja kernel: ata2.00: cmd
25/00:00:a7:36:9e/00:01:23:00:00/e0 tag 0 dma 131072 in
Oct 14 09:59:09 debian-stacja kernel: res
40/00:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x4 (timeout)
Oct 14 09:59:09 debian-stacja kernel: ata2.00: status: { DRDY }
Oct 14 09:59:09 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:59:10 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:59:10 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:59:10 debian-stacja kernel: ata2: EH complete
Oct 14 09:59:10 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:59:10 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:59:10 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:59:10 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:59:40 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:59:40 debian-stacja kernel: ata2.00: cmd
25/00:00:ef:1a:76/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:59:40 debian-stacja kernel: res
40/00:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x4 (timeout)
Oct 14 09:59:40 debian-stacja kernel: ata2.00: status: { DRDY }
Oct 14 09:59:40 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:59:40 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:59:41 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:59:41 debian-stacja kernel: ata2: EH complete
Oct 14 09:59:41 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:59:41 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:59:41 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:59:41 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:59:47 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:59:47 debian-stacja kernel: ata2.00: cmd
25/00:90:67:7c:f3/00:01:24:00:00/e0 tag 0 dma 204800 in
Oct 14 09:59:47 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:59:47 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:59:47 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:59:47 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:59:47 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:59:47 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:59:47 debian-stacja kernel: ata2: EH complete
Oct 14 09:59:47 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:59:47 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:59:47 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:59:47 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:59:48 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:59:48 debian-stacja kernel: ata2.00: cmd
25/00:68:0f:ce:95/00:00:24:00:00/e0 tag 0 dma 53248 in
Oct 14 09:59:48 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:59:48 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:59:48 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:59:48 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:59:48 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:59:48 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:59:48 debian-stacja kernel: ata2: EH complete
Oct 14 09:59:48 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:59:48 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:59:48 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:59:48 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:59:49 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x6 frozen
Oct 14 09:59:49 debian-stacja kernel: ata2.00: cmd
25/00:00:1f:ab:9d/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:59:49 debian-stacja kernel: res
ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Oct 14 09:59:49 debian-stacja kernel: ata2.00: status: { Busy }
Oct 14 09:59:49 debian-stacja kernel: ata2.00: error: { ICRC UNC IDNF ABRT }
Oct 14 09:59:49 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:59:49 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:59:49 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:59:49 debian-stacja kernel: ata2: EH complete
Oct 14 09:59:49 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:59:49 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:59:49 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:59:49 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:59:50 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:59:50 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6d0009
Oct 14 09:59:50 debian-stacja kernel: ata2.00: cmd
25/00:00:4f:0d:6f/00:01:25:00:00/e0 tag 0 dma 131072 in
Oct 14 09:59:50 debian-stacja kernel: res
51/04:6f:e0:0d:6f/00:00:25:00:00/e0 Emask 0x1 (device error)
Oct 14 09:59:50 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:59:50 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:59:50 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:59:50 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:59:50 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
Oct 14 09:59:55 debian-stacja kernel: ata2: hard resetting link
Oct 14 09:59:55 debian-stacja kernel: ata2: SATA link up 1.5 Gbps
(SStatus 113 SControl 310)
Oct 14 09:59:55 debian-stacja kernel: ata2.00: configured for UDMA/33
Oct 14 09:59:55 debian-stacja kernel: ata2: EH complete
Oct 14 09:59:55 debian-stacja kernel: sd 1:0:0:0: [sdb] 976773168
512-byte hardware sectors (500108 MB)
Oct 14 09:59:55 debian-stacja kernel: sd 1:0:0:0: [sdb] Write Protect is off
Oct 14 09:59:55 debian-stacja kernel: sd 1:0:0:0: [sdb] Mode Sense: 00
3a 00 00
Oct 14 09:59:55 debian-stacja kernel: sd 1:0:0:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA
Oct 14 09:59:57 debian-stacja kernel: ata2.00: exception Emask 0x0 SAct
0x0 SErr 0x0 action 0x0
Oct 14 09:59:57 debian-stacja kernel: ata2.00: BMDMA2 stat 0x6d0009
Oct 14 09:59:57 debian-stacja kernel: ata2.00: cmd
25/00:00:af:cc:b5/00:01:24:00:00/e0 tag 0 dma 131072 in
Oct 14 09:59:57 debian-stacja kernel: res
51/04:df:d0:cc:b5/00:00:24:00:00/e0 Emask 0x1 (device error)
Oct 14 09:59:57 debian-stacja kernel: ata2.00: status: { DRDY ERR }
Oct 14 09:59:57 debian-stacja kernel: ata2.00: error: { ABRT }
Oct 14 09:59:57 debian-stacja kernel: ata2.00: failed to IDENTIFY (I/O
error, err_mask=0x1)
Oct 14 09:59:57 debian-stacja kernel: ata2.00: revalidation failed
(errno=-5)
Oct 14 09:59:57 debian-stacja kernel: ata2: failed to recover some
devices, retrying in 5 secs
=======================================================
Best regards.
Damazy
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: sata_sil for 3512A chip on kernel 2.6.26.3
2008-10-14 10:49 ` Damazy
@ 2008-10-15 1:58 ` Tejun Heo
2008-10-15 6:37 ` Damazy
0 siblings, 1 reply; 10+ messages in thread
From: Tejun Heo @ 2008-10-15 1:58 UTC (permalink / raw)
To: Damazy; +Cc: jgarzik, linux-ide
Damazy wrote:
> Tejun Heo wrote:
>
>> Please post full kernel log including the boot messages and error
>> messages.
The commands are either being timed out or aborted by the device. Can
you post the result of "smartctl -a" of the drive?
--
tejun
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: sata_sil for 3512A chip on kernel 2.6.26.3
2008-10-15 1:58 ` Tejun Heo
@ 2008-10-15 6:37 ` Damazy
2008-10-15 6:46 ` Tejun Heo
0 siblings, 1 reply; 10+ messages in thread
From: Damazy @ 2008-10-15 6:37 UTC (permalink / raw)
To: Tejun Heo; +Cc: jgarzik, linux-ide
[-- Attachment #1: Type: text/plain, Size: 11047 bytes --]
Tejun Heo wrote:
>
> The commands are either being timed out or aborted by the device. Can
> you post the result of "smartctl -a" of the drive?
>
This is output of smartctl -a /dev/sda1
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD502IJ
Serial Number: S13TJ90Q641644
Firmware Version: 1AA01112
User Capacity: 500,106,780,160 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 3b
Local Time is: Wed Oct 15 08:32:29 2008 CEST
==> WARNING: May need -F samsung or -F samsung2 enabled; see manual for
details.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test
has ever
been run.
Total time to complete Offline
data collection: (7461) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection
on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 125) minutes.
Conveyance self-test routine
recommended polling time: ( 14) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE
UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail
Always - 0
3 Spin_Up_Time 0x0007 087 087 011 Pre-fail
Always - 4870
4 Start_Stop_Count 0x0032 100 100 000 Old_age
Always - 47
5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail
Always - 0
8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail
Offline - 9770
9 Power_On_Hours 0x0032 100 100 000 Old_age
Always - 1178
10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail
Always - 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age
Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age
Always - 46
13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age
Always - 0
183 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
184 Unknown_Attribute 0x0033 100 100 099 Pre-fail Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 063 060 000 Old_age Always
- 37 (Lifetime Min/Max 35/40)
194 Temperature_Celsius 0x0022 063 059 000 Old_age Always
- 37 (Lifetime Min/Max 35/41)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 115423
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always
- 311
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 190 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 190 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 3f 00 ee 1d e0 Error: ICRC, ABRT 63 sectors at LBA =
0x001dee00 = 1961472
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 3f ed 1d e0 00 00:50:52.250 READ DMA
c8 00 00 3f ec 1d e0 00 00:50:52.250 READ DMA
c8 00 00 3f eb 1d e0 00 00:50:52.250 READ DMA
c8 00 00 3f ea 1d e0 00 00:50:52.250 READ DMA
c8 00 00 3f e9 1d e0 00 00:50:52.250 READ DMA
Error 189 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 9f 58 db 1c e0 Error: ICRC, ABRT 159 sectors at LBA =
0x001cdb58 = 1891160
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 f7 da 1c e0 00 00:50:45.810 READ DMA
c8 00 00 f7 d9 1c e0 00 00:50:45.810 READ DMA
c8 00 00 f7 d8 1c e0 00 00:50:45.810 READ DMA
c8 00 00 f7 d7 1c e0 00 00:50:45.810 READ DMA
c8 00 00 f7 d6 1c e0 00 00:50:45.800 READ DMA
Error 188 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
00 d0 00 00 00 00 a0 at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 3f c5 1a e0 00 00:50:38.500 READ DMA
c8 00 00 3f c4 1a e0 00 00:50:38.490 READ DMA
ca 00 08 df d1 e9 ea 00 00:50:38.480 WRITE DMA
ca 00 08 d7 b1 e9 ea 00 00:50:38.480 WRITE DMA
ca 00 08 cf 91 e9 ea 00 00:50:38.480 WRITE DMA
Error 187 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 4f d0 35 1a e0 Error: ICRC, ABRT 79 sectors at LBA =
0x001a35d0 = 1717712
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 1f 35 1a e0 00 00:50:32.800 READ DMA
c8 00 80 9f 34 1a e0 00 00:50:32.790 READ DMA
c8 00 88 17 34 1a e0 00 00:50:32.790 READ DMA
c8 00 00 17 33 1a e0 00 00:50:32.790 READ DMA
c8 00 00 17 32 1a e0 00 00:50:32.790 READ DMA
Error 186 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
When the command that caused the error occurred, the device was
active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 1f d0 66 16 e0 Error: ICRC, ABRT 31 sectors at LBA =
0x001666d0 = 1468112
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 ef 65 16 e0 00 00:50:28.720 READ DMA
c8 00 00 ef 64 16 e0 00 00:50:28.720 READ DMA
c8 00 00 ef 63 16 e0 00 00:50:28.720 READ DMA
c8 00 80 6f 63 16 e0 00 00:50:28.720 READ DMA
c8 00 88 e7 62 16 e0 00 00:50:28.710 READ DMA
SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision
number = 1
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 529
-
# 2 Short offline Aborted by host 00% 458
-
SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
SMART Selective self-test log data structure revision number 0
Warning: ATA Specification requires selective self-test log data
structure revision number = 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kind regards.
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3828 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: sata_sil for 3512A chip on kernel 2.6.26.3
2008-10-15 6:37 ` Damazy
@ 2008-10-15 6:46 ` Tejun Heo
2008-10-15 7:03 ` Damazy
0 siblings, 1 reply; 10+ messages in thread
From: Tejun Heo @ 2008-10-15 6:46 UTC (permalink / raw)
To: Damazy; +Cc: jgarzik, linux-ide
Damazy wrote:
> Error 190 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
> When the command that caused the error occurred, the device was active
> or idle.
The time record seems screwed.
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 84 51 3f 00 ee 1d e0 Error: ICRC, ABRT 63 sectors at LBA = 0x001dee00
> = 1961472
But the recorded error is consistent with the kernel messages. It
looks like you're suffering serious transmission problem over the SATA
cable. Those transmission errors appear as timeouts or when the drive
detects it ABRTs w/ ICRC. Please check cable, power and try to
connect the drive to other ports.
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: sata_sil for 3512A chip on kernel 2.6.26.3
2008-10-15 6:46 ` Tejun Heo
@ 2008-10-15 7:03 ` Damazy
2008-10-15 7:06 ` Tejun Heo
0 siblings, 1 reply; 10+ messages in thread
From: Damazy @ 2008-10-15 7:03 UTC (permalink / raw)
To: Tejun Heo; +Cc: jgarzik, linux-ide
[-- Attachment #1: Type: text/plain, Size: 1081 bytes --]
Tejun Heo wrote:
> Damazy wrote:
>> Error 190 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
>> When the command that caused the error occurred, the device was active
>> or idle.
>
> The time record seems screwed.
>
>> After command completion occurred, registers were:
>> ER ST SC SN CL CH DH
>> -- -- -- -- -- -- --
>> 84 51 3f 00 ee 1d e0 Error: ICRC, ABRT 63 sectors at LBA = 0x001dee00
>> = 1961472
>
> But the recorded error is consistent with the kernel messages. It
> looks like you're suffering serious transmission problem over the SATA
> cable. Those transmission errors appear as timeouts or when the drive
> detects it ABRTs w/ ICRC. Please check cable, power and try to
> connect the drive to other ports.
>
> Thanks.
>
I'v already try several cable and external power supply, but with the
same result.
This sata chip have only two sata port. If I connect to other one,
errors still appear.
I don't know what can I do else.
The only thing works fine is when I copy something from disk connected
to my Intel 82801DB (ICH4).
TIA
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/x-pkcs7-signature, Size: 3828 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: sata_sil for 3512A chip on kernel 2.6.26.3
2008-10-15 7:03 ` Damazy
@ 2008-10-15 7:06 ` Tejun Heo
2008-10-15 7:19 ` Damazy
0 siblings, 1 reply; 10+ messages in thread
From: Tejun Heo @ 2008-10-15 7:06 UTC (permalink / raw)
To: Damazy; +Cc: jgarzik, linux-ide
Damazy wrote:
> Tejun Heo wrote:
>> Damazy wrote:
>>> Error 190 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours)
>>> When the command that caused the error occurred, the device was active
>>> or idle.
>>
>> The time record seems screwed.
>>
>>> After command completion occurred, registers were:
>>> ER ST SC SN CL CH DH
>>> -- -- -- -- -- -- --
>>> 84 51 3f 00 ee 1d e0 Error: ICRC, ABRT 63 sectors at LBA = 0x001dee00
>>> = 1961472
>>
>> But the recorded error is consistent with the kernel messages. It
>> looks like you're suffering serious transmission problem over the SATA
>> cable. Those transmission errors appear as timeouts or when the drive
>> detects it ABRTs w/ ICRC. Please check cable, power and try to
>> connect the drive to other ports.
>>
>> Thanks.
>>
>
> I'v already try several cable and external power supply, but with the
> same result.
> This sata chip have only two sata port. If I connect to other one,
> errors still appear.
> I don't know what can I do else.
> The only thing works fine is when I copy something from disk connected
> to my Intel 82801DB (ICH4).
I'm afraid there's nothing much can be done from the driver here. Looks
like your drive's PHY is just bonkers or it just doesn't like talking to
the controller. Can you try the drive on a different controller?
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: sata_sil for 3512A chip on kernel 2.6.26.3
2008-10-15 7:06 ` Tejun Heo
@ 2008-10-15 7:19 ` Damazy
2008-10-15 7:25 ` Tejun Heo
0 siblings, 1 reply; 10+ messages in thread
From: Damazy @ 2008-10-15 7:19 UTC (permalink / raw)
To: Tejun Heo; +Cc: jgarzik, linux-ide
Tejun Heo wrote:
>
> I'm afraid there's nothing much can be done from the driver here. Looks
> like your drive's PHY is just bonkers or it just doesn't like talking to
> the controller. Can you try the drive on a different controller?
>
> Thanks.
>
As I wrote before, it was tested on different platform with different os
and it workek just fine.
TIA
--
Damazy
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: sata_sil for 3512A chip on kernel 2.6.26.3
2008-10-15 7:19 ` Damazy
@ 2008-10-15 7:25 ` Tejun Heo
0 siblings, 0 replies; 10+ messages in thread
From: Tejun Heo @ 2008-10-15 7:25 UTC (permalink / raw)
To: Damazy; +Cc: jgarzik, linux-ide
Damazy wrote:
> Tejun Heo wrote:
>>
>> I'm afraid there's nothing much can be done from the driver here. Looks
>> like your drive's PHY is just bonkers or it just doesn't like talking to
>> the controller. Can you try the drive on a different controller?
>>
>> Thanks.
>>
>
> As I wrote before, it was tested on different platform with different os
> and it workek just fine.
Ah.. so, different drive works fine on the same configuration and the
same drive works fine on different configuration. I don't have much
idea how to fix it. It looks like a bad combination of hardware to me.
Maybe the add-on card is wiring cables slightly out of spec and the
receiving PHY of the drive is a bit too sensitive about it (note that
the controller is not reporting any PHY events but the drive is
reporting ICRC).
--
tejun
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2008-10-15 7:27 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-10-02 8:53 sata_sil for 3512A chip on kernel 2.6.26.3 Damazy
2008-10-04 7:39 ` Tejun Heo
2008-10-14 10:49 ` Damazy
2008-10-15 1:58 ` Tejun Heo
2008-10-15 6:37 ` Damazy
2008-10-15 6:46 ` Tejun Heo
2008-10-15 7:03 ` Damazy
2008-10-15 7:06 ` Tejun Heo
2008-10-15 7:19 ` Damazy
2008-10-15 7:25 ` Tejun Heo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).