linux-ide.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: Jeff Garzik <jeff@garzik.org>,
	IDE/ATA development list <linux-ide@vger.kernel.org>,
	Joseph Chan <JosephChan@via.com.tw>
Subject: [PATCH 1/2 #upstream-fixes] sata_via: fix support for 5287
Date: Wed, 22 Oct 2008 00:46:36 +0900	[thread overview]
Message-ID: <48FDF95C.8090809@kernel.org> (raw)
In-Reply-To: <48FDF935.6010307@kernel.org>

5287 used to be treated as vt6420 but it didn't work.  It's new family
of controllers called vt8251 which hosts four SATA ports as M/S of the
two ATA ports.  This configuration is rather peculiar in that although
the M/S devices are on the same port, each have its own SCR (or
equivalent link status/control) registers which screws up the
port-link-device hierarchy assumed by libata.  Another controller
which falls into this category is ata_piix w/ SIDPR access.

libata now has facility to deal with this class of controllers named
slave_link.  A low level driver for such controllers can just call
ata_slave_link_init() on the respective ports and libata will handle
all the difficult parts like following up with single SRST after
hardresetting both ports.

This patch creates new controller class vt8251, implements slave_link
aware init sequence and config space based SCR access for it and moves
5287 to the new class.

This patch is based on Joseph Chan's larger patch which was created
before slave_link was implemented in libata.

  http://thread.gmane.org/gmane.linux.kernel.commits.mm/40640

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Joseph Chan <JosephChan@via.com.tw>
---
 drivers/ata/sata_via.c |  155 +++++++++++++++++++++++++++++++++++++++++++++----
 1 file changed, 143 insertions(+), 12 deletions(-)

Index: work/drivers/ata/sata_via.c
===================================================================
--- work.orig/drivers/ata/sata_via.c
+++ work/drivers/ata/sata_via.c
@@ -44,11 +44,16 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_via"
-#define DRV_VERSION	"2.3"
+#define DRV_VERSION	"2.4"
 
+/*
+ * vt8251 is different from other sata controllers of VIA.  It has two
+ * channels, each channel has both Master and Slave slot.
+ */
 enum board_ids_enum {
 	vt6420,
 	vt6421,
+	vt8251,
 };
 
 enum {
@@ -70,6 +75,8 @@ enum {
 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
 static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
 static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
+static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val);
+static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val);
 static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
 static void svia_noop_freeze(struct ata_port *ap);
 static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
@@ -79,12 +86,12 @@ static void vt6421_set_dma_mode(struct a
 
 static const struct pci_device_id svia_pci_tbl[] = {
 	{ PCI_VDEVICE(VIA, 0x5337), vt6420 },
-	{ PCI_VDEVICE(VIA, 0x0591), vt6420 },
-	{ PCI_VDEVICE(VIA, 0x3149), vt6420 },
-	{ PCI_VDEVICE(VIA, 0x3249), vt6421 },
-	{ PCI_VDEVICE(VIA, 0x5287), vt6420 },
+	{ PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */
+	{ PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */
+	{ PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */
 	{ PCI_VDEVICE(VIA, 0x5372), vt6420 },
 	{ PCI_VDEVICE(VIA, 0x7372), vt6420 },
+	{ PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
 
 	{ }	/* terminate list */
 };
@@ -128,6 +135,13 @@ static struct ata_port_operations vt6421
 	.scr_write		= svia_scr_write,
 };
 
+static struct ata_port_operations vt8251_ops = {
+	.inherits		= &svia_base_ops,
+	.hardreset		= sata_std_hardreset,
+	.scr_read		= vt8251_scr_read,
+	.scr_write		= vt8251_scr_write,
+};
+
 static const struct ata_port_info vt6420_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
 	.pio_mask	= 0x1f,
@@ -152,6 +166,15 @@ static struct ata_port_info vt6421_pport
 	.port_ops	= &vt6421_pata_ops,
 };
 
+static struct ata_port_info vt8251_port_info = {
+	.flags		= ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS |
+			  ATA_FLAG_NO_LEGACY,
+	.pio_mask	= 0x1f,
+	.mwdma_mask	= 0x07,
+	.udma_mask	= ATA_UDMA6,
+	.port_ops	= &vt8251_ops,
+};
+
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
 MODULE_LICENSE("GPL");
@@ -174,6 +197,83 @@ static int svia_scr_write(struct ata_lin
 	return 0;
 }
 
+static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
+{
+	static const u8 ipm_tbl[] = { 1, 2, 6, 0 };
+	struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
+	int slot = 2 * link->ap->port_no + link->pmp;
+	u32 v = 0;
+	u8 raw;
+
+	switch (scr) {
+	case SCR_STATUS:
+		pci_read_config_byte(pdev, 0xA0 + slot, &raw);
+
+		/* read the DET field, bit0 and 1 of the config byte */
+		v |= raw & 0x03;
+
+		/* read the SPD field, bit4 of the configure byte */
+		if (raw & (1 << 4))
+			v |= 0x02 << 4;
+		else
+			v |= 0x01 << 4;
+
+		/* read the IPM field, bit2 and 3 of the config byte */
+		v |= ipm_tbl[(raw >> 2) & 0x3];
+		break;
+
+	case SCR_ERROR:
+		/* devices other than 5287 uses 0xA8 as base */
+		WARN_ON(pdev->device != 0x5287);
+		pci_read_config_dword(pdev, 0xB0 + slot * 4, &v);
+		break;
+
+	case SCR_CONTROL:
+		pci_read_config_byte(pdev, 0xA4 + slot, &raw);
+
+		/* read the DET field, bit0 and bit1 */
+		v |= ((raw & 0x02) << 1) | (raw & 0x01);
+
+		/* read the IPM field, bit2 and bit3 */
+		v |= ((raw >> 2) & 0x03) << 8;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	*val = v;
+	return 0;
+}
+
+static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val)
+{
+	struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
+	int slot = 2 * link->ap->port_no + link->pmp;
+	u32 v = 0;
+
+	switch (scr) {
+	case SCR_ERROR:
+		/* devices other than 5287 uses 0xA8 as base */
+		WARN_ON(pdev->device != 0x5287);
+		pci_write_config_dword(pdev, 0xB0 + slot * 4, val);
+		return 0;
+
+	case SCR_CONTROL:
+		/* set the DET field */
+		v |= ((val & 0x4) >> 1) | (val & 0x1);
+
+		/* set the IPM field */
+		v |= ((val >> 8) & 0x3) << 2;
+
+		pci_write_config_byte(pdev, 0xA4 + slot, v);
+		return 0;
+
+	default:
+		return -EINVAL;
+	}
+}
+
 /**
  *	svia_tf_load - send taskfile registers to host controller
  *	@ap: Port to which output is sent
@@ -396,6 +496,30 @@ static int vt6421_prepare_host(struct pc
 	return 0;
 }
 
+static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
+{
+	const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL };
+	struct ata_host *host;
+	int i, rc;
+
+	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	if (rc)
+		return rc;
+	*r_host = host;
+
+	rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
+	if (rc) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to iomap PCI BAR 5\n");
+		return rc;
+	}
+
+	/* 8251 hosts four sata ports as M/S of the two channels */
+	for (i = 0; i < host->n_ports; i++)
+		ata_slave_link_init(host->ports[i]);
+
+	return 0;
+}
+
 static void svia_configure(struct pci_dev *pdev)
 {
 	u8 tmp8;
@@ -451,10 +575,10 @@ static int svia_init_one(struct pci_dev
 	if (rc)
 		return rc;
 
-	if (board_id == vt6420)
-		bar_sizes = &svia_bar_sizes[0];
-	else
+	if (board_id == vt6421)
 		bar_sizes = &vt6421_bar_sizes[0];
+	else
+		bar_sizes = &svia_bar_sizes[0];
 
 	for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
 		if ((pci_resource_start(pdev, i) == 0) ||
@@ -467,12 +591,19 @@ static int svia_init_one(struct pci_dev
 			return -ENODEV;
 		}
 
-	if (board_id == vt6420)
+	switch (board_id) {
+	case vt6420:
 		rc = vt6420_prepare_host(pdev, &host);
-	else
+		break;
+	case vt6421:
 		rc = vt6421_prepare_host(pdev, &host);
-	if (rc)
-		return rc;
+		break;
+	case vt8251:
+		rc = vt8251_prepare_host(pdev, &host);
+		break;
+	default:
+		return -EINVAL;
+	}
 
 	svia_configure(pdev);
 

  reply	other threads:[~2008-10-21 15:46 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-10-21 15:45 [PATCH 1/2 #upstream-fixes] sata_via: load DEVICE register when CTL changes Tejun Heo
2008-10-21 15:46 ` Tejun Heo [this message]
2008-10-26  6:46   ` [PATCH 1/2 #upstream-fixes] sata_via: fix support for 5287 Tejun Heo
2008-10-31  5:45   ` Jeff Garzik
2008-10-23  0:43 ` [PATCH 1/2 #upstream-fixes] sata_via: load DEVICE register when CTL changes Jeff Garzik

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=48FDF95C.8090809@kernel.org \
    --to=tj@kernel.org \
    --cc=JosephChan@via.com.tw \
    --cc=jeff@garzik.org \
    --cc=linux-ide@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).