From: Jeff Garzik <jeff@garzik.org>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: linux-ide@vger.kernel.org
Subject: Re: [PATCH] ata: Fix experimental tags
Date: Wed, 22 Oct 2008 20:37:57 -0400 [thread overview]
Message-ID: <48FFC765.7010905@garzik.org> (raw)
In-Reply-To: <20081021124529.31706.54794.stgit@localhost.localdomain>
Alan Cox wrote:
> From: Alan Cox <alan@redhat.com>
>
> Various tags are now way out of date
>
> Signed-off-by: Alan Cox <alan@redhat.com>
>
> ---
>
> drivers/ata/Kconfig | 32 ++++++++++++++++----------------
> 1 files changed, 16 insertions(+), 16 deletions(-)
>
>
> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
> index 78fbec8..4095a2c 100644
> --- a/drivers/ata/Kconfig
> +++ b/drivers/ata/Kconfig
> @@ -219,8 +219,8 @@ config PATA_ACPI
> otherwise unsupported hardware.
>
> config PATA_ALI
> - tristate "ALi PATA support (Experimental)"
> - depends on PCI && EXPERIMENTAL
> + tristate "ALi PATA support"
> + depends on PCI
> help
> This option enables support for the ALi ATA interfaces
> found on the many ALi chipsets.
> @@ -263,7 +263,7 @@ config PATA_ATIIXP
> If unsure, say N.
>
> config PATA_CMD640_PCI
> - tristate "CMD640 PCI PATA support (Very Experimental)"
> + tristate "CMD640 PCI PATA support (Experimental)"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the CMD640 PCI IDE
> @@ -291,8 +291,8 @@ config PATA_CS5520
> If unsure, say N.
>
> config PATA_CS5530
> - tristate "CS5530 PATA support (Experimental)"
> - depends on PCI && EXPERIMENTAL
> + tristate "CS5530 PATA support"
> + depends on PCI
> help
> This option enables support for the Cyrix/NatSemi/AMD CS5530
> companion chip used with the MediaGX/Geode processor family.
> @@ -309,8 +309,8 @@ config PATA_CS5535
> If unsure, say N.
>
> config PATA_CS5536
> - tristate "CS5536 PATA support (Experimental)"
> - depends on PCI && X86 && !X86_64 && EXPERIMENTAL
> + tristate "CS5536 PATA support"
> + depends on PCI && X86 && !X86_64
> help
> This option enables support for the AMD CS5536
> companion chip used with the Geode LX processor family.
> @@ -363,7 +363,7 @@ config PATA_HPT37X
> If unsure, say N.
>
> config PATA_HPT3X2N
> - tristate "HPT 372N/302N PATA support (Very Experimental)"
> + tristate "HPT 372N/302N PATA support (Experimental)"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the N variant HPT PATA
> @@ -389,7 +389,7 @@ config PATA_HPT3X3_DMA
> problems with DMA on this chipset.
>
> config PATA_ISAPNP
> - tristate "ISA Plug and Play PATA support (Experimental)"
> + tristate "ISA Plug and Play PATA support"
> depends on EXPERIMENTAL && ISAPNP
> help
> This option enables support for ISA plug & play ATA
> @@ -498,8 +498,8 @@ config PATA_NINJA32
> If unsure, say N.
>
> config PATA_NS87410
> - tristate "Nat Semi NS87410 PATA support (Experimental)"
> - depends on PCI && EXPERIMENTAL
> + tristate "Nat Semi NS87410 PATA support"
> + depends on PCI
> help
> This option enables support for the National Semiconductor
> NS87410 PCI-IDE controller.
> @@ -507,7 +507,7 @@ config PATA_NS87410
> If unsure, say N.
>
> config PATA_NS87415
> - tristate "Nat Semi NS87415 PATA support (Experimental)"
> + tristate "Nat Semi NS87415 PATA support"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the National Semiconductor
> @@ -544,7 +544,7 @@ config PATA_PCMCIA
> If unsure, say N.
>
> config PATA_PDC_OLD
> - tristate "Older Promise PATA controller support (Experimental)"
> + tristate "Older Promise PATA controller support"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the Promise 20246, 20262, 20263,
> @@ -559,7 +559,7 @@ config PATA_QDI
> Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
>
> config PATA_RADISYS
> - tristate "RADISYS 82600 PATA support (Very Experimental)"
> + tristate "RADISYS 82600 PATA support (Experimental)"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the RADISYS 82600
> @@ -586,7 +586,7 @@ config PATA_RZ1000
> If unsure, say N.
>
> config PATA_SC1200
> - tristate "SC1200 PATA support (Very Experimental)"
> + tristate "SC1200 PATA support"
> depends on PCI && EXPERIMENTAL
> help
> This option enables support for the NatSemi/AMD SC1200 SoC
> @@ -620,7 +620,7 @@ config PATA_SIL680
> If unsure, say N.
>
> config PATA_SIS
> - tristate "SiS PATA support (Experimental)"
> + tristate "SiS PATA support"
> depends on PCI && EXPERIMENTAL
> help
As Sergei noted, please remove the CONFIG_EXPERIMENTAL dependencies at
the same time.
Jeff
prev parent reply other threads:[~2008-10-23 0:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-21 12:45 [PATCH] ata: Fix experimental tags Alan Cox
2008-10-21 14:30 ` Sergei Shtylyov
2008-10-21 14:32 ` Jeff Garzik
2008-10-23 0:37 ` Jeff Garzik [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48FFC765.7010905@garzik.org \
--to=jeff@garzik.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).