From: Jeff Garzik <jeff@garzik.org>
To: Phil Sutter <n0-1@freewrt.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
linux-ide@vger.kernel.org, Florian Fainelli <florian@openwrt.org>
Subject: Re: [PATCH] fix pata-rb532-cf
Date: Fri, 14 Nov 2008 18:53:44 -0500 [thread overview]
Message-ID: <491E0F88.5000808@garzik.org> (raw)
In-Reply-To: <1226448783-10047-1-git-send-email-n0-1@freewrt.org>
Phil Sutter wrote:
> The following patch series is a complete updated set of changes I did to
> the pata-rb532-cf driver. In ordered detail: fix functionality, restore
> the behaviour of the original driver when doing transfers and eliminate
> compiler warnings.
>
> Greetings, Phil
>
> ---
>
> After applying the following changes I could verify functionality by
> mounting a filesystem on the cfdisk and reading/writing files in it.
>
> The set_irq_type() function must be wrong, as there is no set_type()
> function defined for the rb532 IRQ chip. But as the used IRQ actually is
> being triggered by a GPIO, setting it's interrupt level should be the
> right alternative. Also to clear a GPIO triggered IRQ, the source has to
> be cleared. This is being done at the end of rb532_pata_irq_handler.
>
> Signed-off-by: Phil Sutter <n0-1@freewrt.org>
> Acked-by: Florian Fainelli <florian@openwrt.org>
> ---
> drivers/ata/pata_rb532_cf.c | 15 ++++++++++-----
> 1 files changed, 10 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
> index f8b3ffc..7b11f40 100644
> --- a/drivers/ata/pata_rb532_cf.c
> +++ b/drivers/ata/pata_rb532_cf.c
> @@ -31,6 +31,7 @@
> #include <scsi/scsi_host.h>
>
> #include <asm/gpio.h>
> +#include <asm/mach-rc32434/gpio.h>
>
> #define DRV_NAME "pata-rb532-cf"
> #define DRV_VERSION "0.1.0"
> @@ -39,7 +40,8 @@
> #define RB500_CF_MAXPORTS 1
> #define RB500_CF_IO_DELAY 400
>
> -#define RB500_CF_REG_CMD 0x0800
> +#define RB500_CF_REG_BASE 0x0800
> +#define RB500_CF_REG_ERR 0x080D
> #define RB500_CF_REG_CTRL 0x080E
> #define RB500_CF_REG_DATA 0x0C00
>
> @@ -62,7 +64,7 @@ static inline void rb532_pata_finish_io(struct ata_port *ap)
> ata_sff_dma_pause(ap);
> ndelay(RB500_CF_IO_DELAY);
>
> - set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
> + rb532_gpio_set_ilevel(1, info->gpio_line);
I'll need to wait for this function to appear upstream... it's not in
2.6.28-rc at least
next prev parent reply other threads:[~2008-11-14 23:53 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-30 21:47 [PATCH] fix pata-rb532-cf Phil Sutter
2008-10-30 22:39 ` Florian Fainelli
2008-10-30 23:20 ` Sergei Shtylyov
2008-10-31 0:09 ` Phil Sutter
2008-10-31 10:38 ` Sergei Shtylyov
2008-10-31 11:08 ` Sergei Shtylyov
2008-11-01 16:09 ` Phil Sutter
2008-11-01 16:12 ` Phil Sutter
2008-11-01 16:26 ` Sergei Shtylyov
2008-11-01 16:45 ` Sergei Shtylyov
2008-11-01 16:45 ` Phil Sutter
2008-11-01 18:09 ` Phil Sutter
2008-11-01 18:11 ` [PATCH] read and write data in 4-byte blocks Phil Sutter
2008-11-01 18:21 ` Phil Sutter
2008-11-02 21:23 ` Sergei Shtylyov
2008-11-03 13:29 ` [PATCH] pata-rb532-cf: " Phil Sutter
2008-11-03 13:45 ` Bartlomiej Zolnierkiewicz
2008-11-04 6:01 ` Jeff Garzik
2008-11-04 12:35 ` Phil Sutter
2008-11-05 11:54 ` Sergei Shtylyov
2008-11-05 12:52 ` Phil Sutter
2008-11-02 22:04 ` [PATCH] fix pata-rb532-cf Sergei Shtylyov
2008-11-02 22:45 ` Phil Sutter
2008-11-01 16:16 ` Sergei Shtylyov
2008-11-12 0:13 ` Phil Sutter
2008-11-12 0:13 ` [PATCH] pata-rb532-cf: read/write data in 4-byte blocks Phil Sutter
2008-11-12 0:14 ` [PATCH] pata-rb532-cf: fix signature of the xfer function Phil Sutter
2008-11-12 2:26 ` Florian Fainelli
2008-11-12 10:54 ` Sergei Shtylyov
2008-11-12 2:25 ` [PATCH] pata-rb532-cf: read/write data in 4-byte blocks Florian Fainelli
2008-11-12 10:50 ` Sergei Shtylyov
2008-11-12 20:57 ` [PATCH] fix pata-rb532-cf Bartlomiej Zolnierkiewicz
2008-11-14 23:53 ` Jeff Garzik [this message]
2009-01-11 16:13 ` Florian Fainelli
2009-01-11 20:47 ` Phil Sutter
2009-01-12 14:32 ` Florian Fainelli
2009-01-12 17:48 ` Phil Sutter
-- strict thread matches above, loose matches on Subject: below --
2008-11-17 20:04 Phil Sutter
2008-11-23 22:56 ` Sergei Shtylyov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=491E0F88.5000808@garzik.org \
--to=jeff@garzik.org \
--cc=bzolnier@gmail.com \
--cc=florian@openwrt.org \
--cc=linux-ide@vger.kernel.org \
--cc=n0-1@freewrt.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).