[PATCH 1/5] storage-fixup: add ASUS F6S with seagate devices

[PATCH 1/5] storage-fixup: add ASUS F6S with seagate devices

[Kel Modderman]

The ASUS F6S was generating approx. 3 clicks per minute without the APM
workaround, with two different seagate drives of similar model but differing
cache/capacity.

Any value ~ 192 or above is enough to have the clicking cease, is the lowest
possible number preferable?

Signed-off-by: Kel Modderman <kel@otaku42.de>
---
--- a/storage-fixup.conf
+++ b/storage-fixup.conf
@@ -153,3 +153,10 @@ dmi system-manufacturer		Micro-Star Inte
 dmi system-product-name		MSI Notebook EX600
 ata model			WDC WD*BEVE*
 act hdparm -B 254 $DEV
+
+# Reported drive model: ST9200420AS
+rule asus-f6s
+dmi system-manufacturer		ASUSTeK Computer Inc.
+dmi system-product-name		F6S
+ata model			ST9*AS
+act hdparm -B 254 $DEV
---

Re: [PATCH 1/5] storage-fixup: add ASUS F6S with seagate devices

[Tejun Heo]

Kel Modderman wrote:
> The ASUS F6S was generating approx. 3 clicks per minute without the APM
> workaround, with two different seagate drives of similar model but differing
> cache/capacity.
> 
> Any value ~ 192 or above is enough to have the clicking cease, is the lowest
> possible number preferable?
> 
> Signed-off-by: Kel Modderman <kel@otaku42.de>

applied.

-- 
tejun

Re: [PATCH 1/5] storage-fixup: add ASUS F6S with seagate devices

[Tejun Heo]

Kel Modderman wrote:
> The ASUS F6S was generating approx. 3 clicks per minute without the APM
> workaround, with two different seagate drives of similar model but differing
> cache/capacity.
> 
> Any value ~ 192 or above is enough to have the clicking cease, is the lowest
> possible number preferable?

Can you please post the result of 'dmidecode' and 'hdparm -I' so that I
can post them to the wiki page?

Thanks.

-- 
tejun