o for usb:usb3
[    4.144706] usb usb3: configuration #1 chosen from 1 choice
[    4.144767] PM: Adding info for usb:3-0:1.0
[    4.144789] hub 3-0:1.0: USB hub found
[    4.144840] hub 3-0:1.0: 2 ports detected
[    4.352019] PM: Adding info for No Bus:usbdev3.1_ep81
[    4.352049] PM: Adding info for No Bus:usbdev3.1
[    4.352089] PM: Adding info for No Bus:usbdev3.1_ep00
[    4.352117] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    4.352167] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.352226] usb usb3: Product: UHCI Host Controller
[    4.352273] usb usb3: Manufacturer: Linux 2.6.27.6 uhci_hcd
[    4.352321] usb usb3: SerialNumber: 0000:00:10.1
[    4.352383] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.352436] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    4.352492] PM: Adding info for No Bus:usb_host4
[    4.352512] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    4.352587] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000a400
[    4.352685] PM: Adding info for usb:usb4
[    4.352713] usb usb4: configuration #1 chosen from 1 choice
[    4.352772] PM: Adding info for usb:4-0:1.0
[    4.352795] hub 4-0:1.0: USB hub found
[    4.352847] hub 4-0:1.0: 2 ports detected
[    4.464005] usb 3-2: new full speed USB device using uhci_hcd and address 2
[    4.560019] PM: Adding info for No Bus:usbdev4.1_ep81
[    4.560048] PM: Adding info for No Bus:usbdev4.1
[    4.560085] PM: Adding info for No Bus:usbdev4.1_ep00
[    4.560105] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    4.560155] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.560214] usb usb4: Product: UHCI Host Controller
[    4.560262] usb usb4: Manufacturer: Linux 2.6.27.6 uhci_hcd
[    4.560310] usb usb4: SerialNumber: 0000:00:10.2
[    4.560371] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    4.560423] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    4.560479] PM: Adding info for No Bus:usb_host5
[    4.560500] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    4.561393] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000a800
[    4.561501] PM: Adding info for usb:usb5
[    4.561527] usb usb5: configuration #1 chosen from 1 choice
[    4.561587] PM: Adding info for usb:5-0:1.0
[    4.561610] hub 5-0:1.0: USB hub found
[    4.561661] hub 5-0:1.0: 2 ports detected
[    4.607609] PM: Adding info for usb:3-2
[    4.607634] usb 3-2: configuration #1 chosen from 1 choice
[    4.610597] PM: Adding info for usb:3-2:1.0
[    4.610635] PM: Adding info for No Bus:usbdev3.2_ep81
[    4.610670] PM: Adding info for No Bus:usbdev3.2_ep02
[    4.610696] PM: Adding info for No Bus:usbdev3.2
[    4.610735] PM: Adding info for No Bus:usbdev3.2_ep00
[    4.610756] usb 3-2: New USB device found, idVendor=05d8, idProduct=4003
[    4.610806] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    4.768019] PM: Adding info for No Bus:usbdev5.1_ep81
[    4.768049] PM: Adding info for No Bus:usbdev5.1
[    4.768088] PM: Adding info for No Bus:usbdev5.1_ep00
[    4.768110] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    4.768160] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.768219] usb usb5: Product: UHCI Host Controller
[    4.768267] usb usb5: Manufacturer: Linux 2.6.27.6 uhci_hcd
[    4.768315] usb usb5: SerialNumber: 0000:00:10.3
[    4.768418] usbcore: registered new interface driver usblp
[    4.768467] Initializing USB Mass Storage driver...
[    4.768543] usbcore: registered new interface driver usb-storage
[    4.768592] USB Mass Storage support registered.
[    4.768663] usbcore: registered new interface driver microtekX6
[    4.768771] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    4.768867] PM: Adding info for platform:i8042
[    4.769150] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.769201] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.769257] PM: Adding info for No Bus:mice
[    4.769280] PM: Adding info for serio:serio0
[    4.769316] PM: Adding info for No Bus:psaux
[    4.769333] PM: Adding info for serio:serio1
[    4.769353] mice: PS/2 mouse device common for all mice
[    4.802277] PM: Adding info for No Bus:input0
[    4.802325] input: AT Translated Set 2 keyboard as /class/input/input0
[    4.802429] i2c /dev entries driver
[    4.802551] ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMOV [0x400-0x406]
[    4.802613] ACPI: Device needs an ACPI driver
[    4.802669] PM: Adding info for No Bus:i2c-0
[    4.802697] PM: Adding info for No Bus:i2c-0
[    4.802754] cpuidle: using governor ladder
[    4.802801] cpuidle: using governor menu
[    4.802902] Advanced Linux Sound Architecture Driver Version 1.0.17.
[    4.802962] PM: Adding info for No Bus:timer
[    4.803004] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[    4.803197] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[    5.316500] PM: Adding info for No Bus:pcmC0D1p
[    5.316589] PM: Adding info for No Bus:pcmC0D1c
[    5.316622] PM: Adding info for No Bus:adsp
[    5.316657] PM: Adding info for No Bus:pcmC0D0p
[    5.316691] PM: Adding info for No Bus:pcmC0D0c
[    5.316721] PM: Adding info for No Bus:dsp
[    5.316749] PM: Adding info for No Bus:audio
[    5.316778] PM: Adding info for ac97:0-0:ALC655
[    5.316808] PM: Adding info for No Bus:controlC0
[    5.316843] PM: Adding info for No Bus:mixer
[    5.317157] ALSA device list:
[    5.317206]   #0: VIA 8237 with ALC655 at 0x9800, irq 22
[    5.317649] TCP cubic registered
[    5.317696] NET: Registered protocol family 17
[    5.317829] RPC: Registered udp transport module.
[    5.317876] RPC: Registered tcp transport module.
[    5.317934] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[    5.318033] powernow-k8:    0 : fid 0xe (2200 MHz), vid 0x2
[    5.318082] powernow-k8:    1 : fid 0xc (2000 MHz), vid 0x6
[    5.318131] powernow-k8:    2 : fid 0xa (1800 MHz), vid 0xa
[    5.318179] powernow-k8:    3 : fid 0x2 (1000 MHz), vid 0x12
[    5.318284] Using IPI Shortcut mode
[    5.318350] PM: Adding info for No Bus:cpu_dma_latency
[    5.318378] PM: Adding info for No Bus:network_latency
[    5.318404] PM: Adding info for No Bus:network_throughput
[    5.318430] registered taskstats version 1
[    5.318599]   Magic number: 0:885:399
[    5.318710] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    5.318993] Freeing unused kernel memory: 244k freed
[    5.319072] PM: Adding info for No Bus:vcs1
[    5.319109] PM: Adding info for No Bus:vcsa1
[    5.350747] processor: module is already loaded
[    5.351019] thermal: module is already loaded
[    5.520357] udev: renamed network interface eth0 to eth1
[    5.646254] PM: Adding info for No Bus:input1
[    5.646293] input: PS/2 Logitech Mouse as /class/input/input1
[    5.652098] PM: Adding info for No Bus:mouse0
[    5.686570] processor: module is already loaded
[    5.686726] thermal: module is already loaded
[    5.821983] Floppy drive(s): fd0 is 1.44M
[    5.839797] FDC 0 is a post-1991 82077
[    5.840798] PM: Adding info for platform:floppy.0
[    5.840839] PM: Adding info for No Bus:fd0
[    5.840871] PM: Adding info for No Bus:2:0
[    5.896017] EXT3-fs: INFO: recovery required on readonly filesystem.
[    5.896071] EXT3-fs: write access will be enabled during recovery.
[    6.292626] kjournald starting.  Commit interval 5 seconds
[    6.292689] EXT3-fs: sda2: orphan cleanup on readonly fs
[    6.292741] ext3_orphan_cleanup: deleting unreferenced inode 6204313
[    6.292763] ext3_orphan_cleanup: deleting unreferenced inode 6204312
[    6.292769] ext3_orphan_cleanup: deleting unreferenced inode 6204311
[    6.292773] ext3_orphan_cleanup: deleting unreferenced inode 6204310
[    6.292788] ext3_orphan_cleanup: deleting unreferenced inode 6204309
[    6.292792] EXT3-fs: sda2: 5 orphan inodes deleted
[    6.292839] EXT3-fs: recovery complete.
[    6.323081] EXT3-fs: mounted filesystem with ordered data mode.
[    6.744643] PM: Removing info for No Bus:vcs1
[    6.744686] PM: Removing info for No Bus:vcsa1
[    6.744727] PM: Adding info for No Bus:vcs1
[    6.744739] PM: Adding info for No Bus:vcsa1
[    6.744756] PM: Removing info for No Bus:vcs1
[    6.744765] PM: Removing info for No Bus:vcsa1
[    6.756432] PM: Adding info for No Bus:vcs1
[    6.756443] PM: Adding info for No Bus:vcsa1
[    6.756496] PM: Removing info for No Bus:vcs1
[    6.756504] PM: Removing info for No Bus:vcsa1
[    6.756524] PM: Adding info for No Bus:vcs1
[    6.756534] PM: Adding info for No Bus:vcsa1
[    6.756579] PM: Removing info for No Bus:vcs1
[    6.756587] PM: Removing info for No Bus:vcsa1
[    6.756607] PM: Adding info for No Bus:vcs1
[    6.756616] PM: Adding info for No Bus:vcsa1
[    6.756701] PM: Removing info for No Bus:vcs1
[    6.756710] PM: Removing info for No Bus:vcsa1
[    6.768617] PM: Adding info for No Bus:vcs1
[    6.768628] PM: Adding info for No Bus:vcsa1
[    7.751290] udevd version 125 started
[    8.350763] PM: Adding info for No Bus:input2
[    8.350796] input: Power Button (FF) as /class/input/input2
[    8.360070] PM: Adding info for No Bus:event0
[    8.376063] PM: Adding info for No Bus:event1
[    8.408077] PM: Adding info for No Bus:event2
[    8.408097] ACPI: Power Button (FF) [PWRF]
[    8.408187] PM: Adding info for No Bus:input3
[    8.408214] input: Power Button (CM) as /class/input/input3
[    8.436061] PM: Adding info for No Bus:event3
[    8.436082] ACPI: Power Button (CM) [PWRB]
[    8.436188] PM: Adding info for No Bus:input4
[    8.436215] input: Sleep Button (CM) as /class/input/input4
[    8.460087] PM: Adding info for No Bus:event4
[    8.460123] ACPI: Sleep Button (CM) [SLPB]
[    8.483378] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188]
[    8.489179] PM: Adding info for No Bus:agpgart
[    8.489196] agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[    8.817628] PM: Adding info for No Bus:hwmon0
[    8.951340] PM: Adding info for No Bus:rtc0
[    8.951365] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    8.951447] rtc0: alarms up to one year, y3k
[    8.970977] PM: Adding info for No Bus:input5
[    8.971009] input: PC Speaker as /class/input/input5
[    8.981468] PM: Adding info for No Bus:event5
[   34.170605] Unable to find swap-space signature
[   34.582773] EXT3 FS on sda2, internal journal
[   35.478246] Unable to find swap-space signature
[   36.020435] r8169: eth1: link up
[   37.484103] PM: Adding info for No Bus:0:19
[   37.495045] PM: Adding info for No Bus:0:20
[   38.288223] ttyS1: LSR safety check engaged!
[   38.288759] ttyS1: LSR safety check engaged!
[   38.704254] PM: Removing info for No Bus:vcs1
[   38.704300] PM: Removing info for No Bus:vcsa1
[   38.704696] PM: Adding info for No Bus:vcs1
[   38.704709] PM: Adding info for No Bus:vcsa1
[   38.704762] PM: Removing info for No Bus:vcs1
[   38.704774] PM: Removing info for No Bus:vcsa1
[   38.704795] PM: Adding info for No Bus:vcs1
[   38.704805] PM: Adding info for No Bus:vcsa1
[   38.704851] PM: Removing info for No Bus:vcs1
[   38.704860] PM: Removing info for No Bus:vcsa1
[   38.704879] PM: Adding info for No Bus:vcs1
[   38.704890] PM: Adding info for No Bus:vcsa1
[   38.704975] PM: Removing info for No Bus:vcs1
[   38.704984] PM: Removing info for No Bus:vcsa1
[   38.705147] PM: Adding info for No Bus:vcs1
[   38.705159] PM: Adding info for No Bus:vcsa1
[   46.724060] ttyS1: LSR safety check engaged!
[   51.740927] PM: Adding info for No Bus:vcs3
[   51.740950] PM: Adding info for No Bus:vcsa3
[   51.742768] PM: Adding info for No Bus:vcs4
[   51.742791] PM: Adding info for No Bus:vcsa4
[   51.743498] PM: Adding info for No Bus:vcs2
[   51.743519] PM: Adding info for No Bus:vcsa2
[   51.744155] PM: Adding info for No Bus:vcs5
[   51.744173] PM: Adding info for No Bus:vcsa5
[   51.746012] PM: Adding info for No Bus:vcs6
[   51.746033] PM: Adding info for No Bus:vcsa6
[   51.815986] PM: Adding info for No Bus:vcs7
[   51.816026] PM: Adding info for No Bus:vcsa7
[   53.021248] PM: Removing info for No Bus:vcs7
[   53.021297] PM: Removing info for No Bus:vcsa7
[   72.641263] PM: Syncing filesystems ... done.
[   72.646638] PM: Preparing system for mem sleep
[   72.647528] Freezing user space processes ... (elapsed 0.00 seconds) done.
[   72.647880] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[   72.648047] PM: Entering mem sleep
[   72.648063] agpgart-amd64 0000:00:00.0: preparing suspend
[   72.648066] pci 0000:00:01.0: preparing suspend
[   72.648068] sata_via 0000:00:08.0: preparing suspend
[   72.648070] r8169 0000:00:0b.0: preparing suspend
[   72.648072] sata_promise 0000:00:0d.0: preparing suspend
[   72.648074] pci 0000:00:0e.0: preparing suspend
[   72.648076] sata_via 0000:00:0f.0: preparing suspend
[   72.648078] VIA_IDE 0000:00:0f.1: preparing suspend
[   72.648080] uhci_hcd 0000:00:10.0: preparing suspend
[   72.648082] uhci_hcd 0000:00:10.1: preparing suspend
[   72.648084] uhci_hcd 0000:00:10.2: preparing suspend
[   72.648086] uhci_hcd 0000:00:10.3: preparing suspend
[   72.648088] ehci_hcd 0000:00:10.4: preparing suspend
[   72.648090] pci 0000:00:11.0: preparing suspend
[   72.648092] VIA 82xx Audio 0000:00:11.5: preparing suspend
[   72.648094] pci 0000:00:18.0: preparing suspend
[   72.648095] pci 0000:00:18.1: preparing suspend
[   72.648097] pci 0000:00:18.2: preparing suspend
[   72.648099] k8temp 0000:00:18.3: preparing suspend
[   72.648101] pci 0000:01:00.0: preparing suspend
[   72.648109] pcspkr pcspkr: preparing suspend
[   72.648112] platform vesafb.0: preparing suspend
[   72.648129] serial8250 serial8250: preparing suspend
[   72.648151] usb usb1: preparing type suspend, may wakeup
[   72.648154] usb usb2: preparing type suspend, may wakeup
[   72.648157] usb usb3: preparing type suspend, may wakeup
[   72.648160] usb usb4: preparing type suspend, may wakeup
[   72.648163] usb usb5: preparing type suspend, may wakeup
[   72.648165] usb 3-2: preparing type suspend, may wakeup
[   72.648169] i8042 i8042: preparing suspend
[   72.648177] platform floppy.0: preparing suspend
[   72.648187] rtc rtc0: legacy class suspend
[   72.648215] platform floppy.0: suspend
[   72.648217] ac97 0-0:ALC655: legacy suspend
[   72.648220] psmouse serio1: legacy suspend
[   73.109030] atkbd serio0: legacy suspend
[   73.652003] i8042 i8042: suspend
[   73.652013] usb 3-2: type suspend, may wakeup
[   73.668006] usb usb5: type suspend, may wakeup
[   73.668008] usb usb4: type suspend, may wakeup
[   73.668011] usb usb3: type suspend, may wakeup
[   73.668024] usb usb2: type suspend, may wakeup
[   73.668026] usb usb1: type suspend, may wakeup
[   73.668029] sd 1:0:0:0: legacy suspend
[   73.668034] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[   73.668227] sd 1:0:0:0: [sda] Stopping disk
[   73.974812] serial8250 serial8250: suspend
[   73.974824] platform vesafb.0: suspend
[   73.974826] pcspkr pcspkr: suspend
[   73.974834] i8042 kbd 00:0a: legacy suspend
[   73.974852] i8042 aux 00:09: legacy suspend
[   73.974856] pnp 00:08: legacy suspend
[   73.974858] pnp 00:07: legacy suspend
[   73.974860] rtc_cmos 00:06: legacy suspend, may wakeup
[   73.974867] pnp 00:05: legacy suspend
[   73.974869] system 00:04: legacy suspend
[   73.974873] pnp 00:03: legacy suspend
[   73.974874] serial 00:02: legacy suspend
[   73.975028] serial 00:02: disabled
[   73.975095] pnp 00:01: legacy suspend
[   73.975096] pnp 00:00: legacy suspend
[   73.975098] pci 0000:01:00.0: suspend
[   73.975114] k8temp 0000:00:18.3: suspend
[   73.975119] pci 0000:00:18.2: suspend
[   73.975123] pci 0000:00:18.1: suspend
[   73.975128] pci 0000:00:18.0: suspend
[   73.975134] VIA 82xx Audio 0000:00:11.5: suspend
[   73.975862] VIA 82xx Audio 0000:00:11.5: PCI INT C disabled
[   73.988004] pci 0000:00:11.0: suspend
[   73.988027] ehci_hcd 0000:00:10.4: suspend
[   73.988055] ehci_hcd 0000:00:10.4: PCI INT C disabled
[   74.004005] uhci_hcd 0000:00:10.3: suspend
[   74.004032] uhci_hcd 0000:00:10.3: PCI INT B disabled
[   74.020004] uhci_hcd 0000:00:10.2: suspend
[   74.020030] uhci_hcd 0000:00:10.2: PCI INT B disabled
[   74.036004] uhci_hcd 0000:00:10.1: suspend
[   74.036030] uhci_hcd 0000:00:10.1: PCI INT A disabled
[   74.052004] uhci_hcd 0000:00:10.0: suspend
[   74.052030] uhci_hcd 0000:00:10.0: PCI INT A disabled
[   74.068004] VIA_IDE 0000:00:0f.1: suspend
[   74.068027] sata_via 0000:00:0f.0: suspend
[   74.428027] sata_via 0000:00:0f.0: PCI INT B disabled
[   74.444004] pci 0000:00:0e.0: suspend
[   74.444027] sata_promise 0000:00:0d.0: suspend
[   74.444691] sata_promise 0000:00:0d.0: PCI INT A disabled
[   74.460004] r8169 0000:00:0b.0: suspend
[   74.460032] ACPI handle has no context!
[   74.460037] ACPI handle has no context!
[   74.476003] sata_via 0000:00:08.0: suspend
[   74.476066] sata_via 0000:00:08.0: PCI INT A disabled
[   74.492003] pci 0000:00:01.0: suspend
[   74.492022] agpgart-amd64 0000:00:00.0: suspend
[   74.492054] ACPI handle has no context!
[   74.508004] acpi LNXTHERM:00: legacy suspend
[   74.508006] button PNP0C0E:00: legacy suspend
[   74.508008] pci_link PNP0C0F:07: legacy suspend
[   74.508010] pci_link PNP0C0F:06: legacy suspend
[   74.508012] pci_link PNP0C0F:05: legacy suspend
[   74.508014] pci_link PNP0C0F:04: legacy suspend
[   74.508016] pci_link PNP0C0F:03: legacy suspend
[   74.508017] pci_link PNP0C0F:02: legacy suspend
[   74.508019] pci_link PNP0C0F:01: legacy suspend
[   74.508021] pci_link PNP0C0F:00: legacy suspend
[   74.508023] acpi device:13: legacy suspend
[   74.508025] acpi device:12: legacy suspend
[   74.508026] acpi device:11: legacy suspend
[   74.508028] acpi device:10: legacy suspend
[   74.508030] acpi device:0f: legacy suspend
[   74.508031] acpi device:0e: legacy suspend
[   74.508033] acpi device:0d: legacy suspend
[   74.508035] acpi device:0c: legacy suspend
[   74.508037] acpi device:0b: legacy suspend
[   74.508038] acpi device:0a: legacy suspend
[   74.508040] acpi device:09: legacy suspend
[   74.508042] acpi device:08: legacy suspend
[   74.508044] acpi PNP0303:00: legacy suspend
[   74.508045] acpi PNP0F13:00: legacy suspend
[   74.508047] acpi PNP0C04:00: legacy suspend
[   74.508049] acpi PNP0800:00: legacy suspend
[   74.508050] acpi PNP0B00:00: legacy suspend
[   74.508052] acpi PNP0100:00: legacy suspend
[   74.508054] acpi PNP0200:00: legacy suspend
[   74.508056] acpi PNP0C02:00: legacy suspend
[   74.508057] acpi device:07: legacy suspend
[   74.508059] acpi device:06: legacy suspend
[   74.508061] acpi device:05: legacy suspend
[   74.508063] acpi device:04: legacy suspend
[   74.508064] acpi device:03: legacy suspend
[   74.508066] acpi device:02: legacy suspend
[   74.508068] acpi device:01: legacy suspend
[   74.508070] power LNXPOWER:03: legacy suspend
[   74.508071] power LNXPOWER:02: legacy suspend
[   74.508073] power LNXPOWER:01: legacy suspend
[   74.508075] power LNXPOWER:00: legacy suspend
[   74.508076] acpi PNP0401:00: legacy suspend
[   74.508078] acpi PNP0501:00: legacy suspend
[   74.508080] acpi PNP0700:00: legacy suspend
[   74.508082] pci_root PNP0A03:00: legacy suspend
[   74.508084] button PNP0C0C:00: legacy suspend
[   74.508085] acpi device:00: legacy suspend
[   74.508087] processor ACPI0007:00: legacy suspend
[   74.508089] button LNXPWRBN:00: legacy suspend
[   74.508091] acpi LNXSYSTM:00: legacy suspend
[   74.508229] ACPI: Preparing to enter system sleep state S3
[   74.508520] platform floppy.0: LATE suspend
[   74.508525] i8042 i8042: LATE suspend
[   74.508536] serial8250 serial8250: LATE suspend
[   74.508544] platform vesafb.0: LATE suspend
[   74.508546] pcspkr pcspkr: LATE suspend
[   74.508550] pci 0000:01:00.0: LATE suspend
[   74.508552] k8temp 0000:00:18.3: LATE suspend
[   74.508554] pci 0000:00:18.2: LATE suspend
[   74.508555] pci 0000:00:18.1: LATE suspend
[   74.508557] pci 0000:00:18.0: LATE suspend
[   74.508559] VIA 82xx Audio 0000:00:11.5: LATE suspend
[   74.508561] pci 0000:00:11.0: LATE suspend
[   74.508562] ehci_hcd 0000:00:10.4: LATE suspend
[   74.508564] uhci_hcd 0000:00:10.3: LATE suspend
[   74.508566] uhci_hcd 0000:00:10.2: LATE suspend
[   74.508568] uhci_hcd 0000:00:10.1: LATE suspend
[   74.508569] uhci_hcd 0000:00:10.0: LATE suspend
[   74.508571] VIA_IDE 0000:00:0f.1: LATE suspend
[   74.508573] sata_via 0000:00:0f.0: LATE suspend
[   74.508575] pci 0000:00:0e.0: LATE suspend
[   74.508577] sata_promise 0000:00:0d.0: LATE suspend
[   74.508579] r8169 0000:00:0b.0: LATE suspend
[   74.508580] sata_via 0000:00:08.0: LATE suspend
[   74.508582] pci 0000:00:01.0: LATE suspend
[   74.508584] agpgart-amd64 0000:00:00.0: LATE suspend
[   74.512001]  hwsleep-0311 [00] enter_sleep_state     : Entering sleep state [S3]
[   74.512001] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[   74.512001] Intel machine check architecture supported.
[   74.512001] Intel machine check reporting enabled on CPU#0.
[   74.512001] evxfevnt-0079 [00] enable                : System is already in ACPI mode
[   74.512001] Back to C!
[   74.512001] agpgart-amd64 0000:00:00.0: EARLY resume
[   74.512001] pci 0000:00:01.0: EARLY resume
[   74.512001] sata_via 0000:00:08.0: EARLY resume
[   74.512001] r8169 0000:00:0b.0: EARLY resume
[   74.512001] sata_promise 0000:00:0d.0: EARLY resume
[   74.512001] pci 0000:00:0e.0: EARLY resume
[   74.512001] sata_via 0000:00:0f.0: EARLY resume
[   74.512001] VIA_IDE 0000:00:0f.1: EARLY resume
[   74.512001] uhci_hcd 0000:00:10.0: EARLY resume
[   74.512001] uhci_hcd 0000:00:10.1: EARLY resume
[   74.512001] uhci_hcd 0000:00:10.2: EARLY resume
[   74.512001] uhci_hcd 0000:00:10.3: EARLY resume
[   74.512001] ehci_hcd 0000:00:10.4: EARLY resume
[   74.512001] pci 0000:00:11.0: EARLY resume
[   74.512001] VIA 82xx Audio 0000:00:11.5: EARLY resume
[   74.512001] pci 0000:00:18.0: EARLY resume
[   74.512001] pci 0000:00:18.1: EARLY resume
[   74.512001] pci 0000:00:18.2: EARLY resume
[   74.512001] k8temp 0000:00:18.3: EARLY resume
[   74.512001] pci 0000:01:00.0: EARLY resume
[   74.512001] pcspkr pcspkr: EARLY resume
[   74.512001] platform vesafb.0: EARLY resume
[   74.512001] serial8250 serial8250: EARLY resume
[   74.512001] i8042 i8042: EARLY resume
[   74.512001] platform floppy.0: EARLY resume
[   74.512001] ACPI: Waking up from system sleep state S3
[   75.168140] acpi LNXSYSTM:00: legacy resume
[   75.168142] button LNXPWRBN:00: legacy resume
[   75.168145] processor ACPI0007:00: legacy resume
[   75.168146] acpi device:00: legacy resume
[   75.168148] button PNP0C0C:00: legacy resume
[   75.168151] pci_root PNP0A03:00: legacy resume
[   75.168152] acpi PNP0700:00: legacy resume
[   75.168154] acpi PNP0501:00: legacy resume
[   75.168156] acpi PNP0401:00: legacy resume
[   75.168158] power LNXPOWER:00: legacy resume
[   75.168185] power LNXPOWER:01: legacy resume
[   75.168209] power LNXPOWER:02: legacy resume
[   75.168232] power LNXPOWER:03: legacy resume
[   75.168255] acpi device:01: legacy resume
[   75.168257] acpi device:02: legacy resume
[   75.168259] acpi device:03: legacy resume
[   75.168260] acpi device:04: legacy resume
[   75.168262] acpi device:05: legacy resume
[   75.168264] acpi device:06: legacy resume
[   75.168266] acpi device:07: legacy resume
[   75.168268] acpi PNP0C02:00: legacy resume
[   75.168269] acpi PNP0200:00: legacy resume
[   75.168271] acpi PNP0100:00: legacy resume
[   75.168273] acpi PNP0B00:00: legacy resume
[   75.168275] acpi PNP0800:00: legacy resume
[   75.168276] acpi PNP0C04:00: legacy resume
[   75.168278] acpi PNP0F13:00: legacy resume
[   75.168280] acpi PNP0303:00: legacy resume
[   75.168282] acpi device:08: legacy resume
[   75.168283] acpi device:09: legacy resume
[   75.168285] acpi device:0a: legacy resume
[   75.168287] acpi device:0b: legacy resume
[   75.168289] acpi device:0c: legacy resume
[   75.168290] acpi device:0d: legacy resume
[   75.168292] acpi device:0e: legacy resume
[   75.168294] acpi device:0f: legacy resume
[   75.168296] acpi device:10: legacy resume
[   75.168297] acpi device:11: legacy resume
[   75.168299] acpi device:12: legacy resume
[   75.168301] acpi device:13: legacy resume
[   75.168303] pci_link PNP0C0F:00: legacy resume
[   75.168305] pci_link PNP0C0F:01: legacy resume
[   75.168306] pci_link PNP0C0F:02: legacy resume
[   75.168308] pci_link PNP0C0F:03: legacy resume
[   75.168310] pci_link PNP0C0F:04: legacy resume
[   75.168312] pci_link PNP0C0F:05: legacy resume
[   75.168314] pci_link PNP0C0F:06: legacy resume
[   75.168316] pci_link PNP0C0F:07: legacy resume
[   75.168318] button PNP0C0E:00: legacy resume
[   75.168319] acpi LNXTHERM:00: legacy resume
[   75.168322] agpgart-amd64 0000:00:00.0: resume
[   75.184033] pci 0000:00:01.0: resume
[   75.184057] pci 0000:00:01.0: setting latency timer to 64
[   75.184060] sata_via 0000:00:08.0: resume
[   75.200030] sata_via 0000:00:08.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   75.200209] r8169 0000:00:0b.0: resume
[   75.216018] r8169 0000:00:0b.0: restoring config space at offset 0x3 (was 0x2008, writing 0x4008)
[   75.216030] sata_promise 0000:00:0d.0: resume
[   75.232029] sata_promise 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   75.232111] r8169: eth1: link up
[   75.248407] pci 0000:00:0e.0: resume
[   75.248430] sata_via 0000:00:0f.0: resume
[   75.264027] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[   75.264083] VIA_IDE 0000:00:0f.1: resume
[   75.264111] VIA_IDE 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   75.264161] uhci_hcd 0000:00:10.0: resume
[   75.280005] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   75.280090] usb usb2: root hub lost power or was reset
[   75.280147] uhci_hcd 0000:00:10.1: resume
[   75.296005] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[   75.296089] usb usb3: root hub lost power or was reset
[   75.296144] uhci_hcd 0000:00:10.2: resume
[   75.312005] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[   75.312089] usb usb4: root hub lost power or was reset
[   75.312144] uhci_hcd 0000:00:10.3: resume
[   75.328005] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[   75.328089] usb usb5: root hub lost power or was reset
[   75.328145] ehci_hcd 0000:00:10.4: resume
[   75.344005] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[   75.344072] ehci_hcd 0000:00:10.4: restoring config space at offset 0x3 (was 0x802008, writing 0x802010)
[   75.344082] pci 0000:00:11.0: resume
[   75.344107] VIA 82xx Audio 0000:00:11.5: resume
[   75.367222] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   75.367284] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[   75.370230] pci 0000:00:18.0: resume
[   75.370237] pci 0000:00:18.1: resume
[   75.370243] pci 0000:00:18.2: resume
[   75.370248] k8temp 0000:00:18.3: resume
[   75.370253] pci 0000:01:00.0: resume
[   75.370260] pci 0000:01:00.0: restoring config space at offset 0xc (was 0x0, writing 0xcfee0000)
[   75.370271] pnp 00:00: legacy resume
[   75.370273] pnp 00:01: legacy resume
[   75.370274] serial 00:02: legacy resume
[   75.370993] serial 00:02: activated
[   75.371042] pnp 00:03: legacy resume
[   75.371044] system 00:04: legacy resume
[   75.371046] pnp 00:05: legacy resume
[   75.371048] rtc_cmos 00:06: legacy resume
[   75.371051] pnp 00:07: legacy resume
[   75.371052] pnp 00:08: legacy resume
[   75.371054] i8042 aux 00:09: legacy resume
[   75.371056] i8042 kbd 00:0a: legacy resume
[   75.371061] pcspkr pcspkr: resume
[   75.371063] platform vesafb.0: resume
[   75.371078] serial8250 serial8250: resume
[   75.371094] sd 1:0:0:0: legacy resume
[   75.371097] sd 1:0:0:0: [sda] Starting disk
[   75.545270] ata4: SATA link down (SStatus 0 SControl 310)
[   75.545331] ata5: SATA link down (SStatus 0 SControl 310)
[   75.568074] ata1: SATA link down (SStatus 0 SControl 300)
[   75.724035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   75.740505] ata2.00: configured for UDMA/133
[   75.750539] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   75.750600] sd 1:0:0:0: [sda] Write Protect is off
[   75.750648] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   75.750663] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   75.750731] usb usb1: type resume
[   75.816023] usb usb2: type resume
[   75.816026] usb usb3: type resume
[   76.064006] usb usb4: type resume
[   76.064008] usb usb5: type resume
[   76.064010] usb 3-2: type resume
[   76.176005] usb 3-2: reset full speed USB device using uhci_hcd and address 2
[   76.322902] i8042 i8042: resume
[   76.322927] atkbd serio0: legacy resume
[   76.322930] psmouse serio1: legacy resume
[   76.322934] ac97 0-0:ALC655: legacy resume
[   76.322938] platform floppy.0: resume
[   76.322942] rtc rtc0: legacy class resume
[   76.322976] platform floppy.0: completing resume
[   76.322980] i8042 i8042: completing resume
[   76.322982] usb 3-2: completing type resume
[   76.322984] usb usb5: completing type resume
[   76.322986] usb usb4: completing type resume
[   76.322988] usb usb3: completing type resume
[   76.322991] usb usb2: completing type resume
[   76.322993] usb usb1: completing type resume
[   76.323004] serial8250 serial8250: completing resume
[   76.323013] platform vesafb.0: completing resume
[   76.323015] pcspkr pcspkr: completing resume
[   76.323019] pci 0000:01:00.0: completing resume
[   76.323021] k8temp 0000:00:18.3: completing resume
[   76.323023] pci 0000:00:18.2: completing resume
[   76.323025] pci 0000:00:18.1: completing resume
[   76.323027] pci 0000:00:18.0: completing resume
[   76.323028] VIA 82xx Audio 0000:00:11.5: completing resume
[   76.323030] pci 0000:00:11.0: completing resume
[   76.323032] ehci_hcd 0000:00:10.4: completing resume
[   76.323034] uhci_hcd 0000:00:10.3: completing resume
[   76.323036] uhci_hcd 0000:00:10.2: completing resume
[   76.323037] uhci_hcd 0000:00:10.1: completing resume
[   76.323039] uhci_hcd 0000:00:10.0: completing resume
[   76.323041] VIA_IDE 0000:00:0f.1: completing resume
[   76.323043] sata_via 0000:00:0f.0: completing resume
[   76.323044] pci 0000:00:0e.0: completing resume
[   76.323046] sata_promise 0000:00:0d.0: completing resume
[   76.323048] r8169 0000:00:0b.0: completing resume
[   76.323050] sata_via 0000:00:08.0: completing resume
[   76.323052] pci 0000:00:01.0: completing resume
[   76.323053] agpgart-amd64 0000:00:00.0: completing resume
[   76.323063] PM: Finishing wakeup.
[   76.323065] Restarting tasks ... done.
[   76.381309] atkbd.c: Failed to enable keyboard on isa0060/serio0
[  158.851751] PM: Syncing filesystems ... done.
[  158.854924] PM: Preparing system for mem sleep
[  158.855805] Freezing user space processes ... (elapsed 0.00 seconds) done.
[  158.856175] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[  158.856351] PM: Entering mem sleep
[  158.856368] agpgart-amd64 0000:00:00.0: preparing suspend
[  158.856370] pci 0000:00:01.0: preparing suspend
[  158.856372] sata_via 0000:00:08.0: preparing suspend
[  158.856374] r8169 0000:00:0b.0: preparing suspend
[  158.856376] sata_promise 0000:00:0d.0: preparing suspend
[  158.856378] pci 0000:00:0e.0: preparing suspend
[  158.856380] sata_via 0000:00:0f.0: preparing suspend
[  158.856382] VIA_IDE 0000:00:0f.1: preparing suspend
[  158.856384] uhci_hcd 0000:00:10.0: preparing suspend
[  158.856386] uhci_hcd 0000:00:10.1: preparing suspend
[  158.856388] uhci_hcd 0000:00:10.2: preparing suspend
[  158.856390] uhci_hcd 0000:00:10.3: preparing suspend
[  158.856392] ehci_hcd 0000:00:10.4: preparing suspend
[  158.856394] pci 0000:00:11.0: preparing suspend
[  158.856396] VIA 82xx Audio 0000:00:11.5: preparing suspend
[  158.856398] pci 0000:00:18.0: preparing suspend
[  158.856400] pci 0000:00:18.1: preparing suspend
[  158.856401] pci 0000:00:18.2: preparing suspend
[  158.856403] k8temp 0000:00:18.3: preparing suspend
[  158.856405] pci 0000:01:00.0: preparing suspend
[  158.856413] pcspkr pcspkr: preparing suspend
[  158.856416] platform vesafb.0: preparing suspend
[  158.856433] serial8250 serial8250: preparing suspend
[  158.856454] usb usb1: preparing type suspend, may wakeup
[  158.856458] usb usb2: preparing type suspend, may wakeup
[  158.856461] usb usb3: preparing type suspend, may wakeup
[  158.856464] usb usb4: preparing type suspend, may wakeup
[  158.856467] usb usb5: preparing type suspend, may wakeup
[  158.856469] usb 3-2: preparing type suspend, may wakeup
[  158.856473] i8042 i8042: preparing suspend
[  158.856481] platform floppy.0: preparing suspend
[  158.856491] rtc rtc0: legacy class suspend
[  158.856519] platform floppy.0: suspend
[  158.856521] ac97 0-0:ALC655: legacy suspend
[  158.856524] psmouse serio1: legacy suspend
[  159.313427] atkbd serio0: legacy suspend
[  159.856003] i8042 i8042: suspend
[  159.856014] usb 3-2: type suspend, may wakeup
[  159.872005] usb usb5: type suspend, may wakeup
[  159.872008] usb usb4: type suspend, may wakeup
[  159.872010] usb usb3: type suspend, may wakeup
[  159.872023] usb usb2: type suspend, may wakeup
[  159.872025] usb usb1: type suspend, may wakeup
[  159.872029] sd 1:0:0:0: legacy suspend
[  159.872034] sd 1:0:0:0: [sda] Synchronizing SCSI cache
[  159.872233] sd 1:0:0:0: [sda] Stopping disk
[  189.872020] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  189.872075] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  189.872076]          res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[  189.872182] ata2.00: status: { DRDY }
[  189.872237] ata2: hard resetting link
[  190.192017] ata2: SATA link down (SStatus 100 SControl 300)
[  190.373016] ata2: hard resetting link
[  190.848036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  190.864505] ata2.00: configured for UDMA/133
[  190.864759] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[  190.864809] ata2: hotplug_status 0x2
[  190.880504] ata2.00: configured for UDMA/133
[  190.880554] ata2: EH complete
[  220.880010] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  220.880064] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  220.880065]          res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[  220.880171] ata2.00: status: { DRDY }
[  220.880223] ata2: hard resetting link
[  221.200017] ata2: SATA link down (SStatus 100 SControl 300)
[  221.381000] ata2: hard resetting link
[  221.856034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  221.872501] ata2.00: configured for UDMA/133
[  221.872753] ata2: limiting SATA link speed to 1.5 Gbps
[  221.872802] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[  221.872852] ata2: hotplug_status 0x2
[  221.872903] ata2: hard resetting link
[  222.752034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  222.768501] ata2.00: configured for UDMA/133
[  222.768550] ata2: EH complete
[  252.768010] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  252.768063] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  252.768064]          res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[  252.768171] ata2.00: status: { DRDY }
[  252.768223] ata2: hard resetting link
[  253.088017] ata2: SATA link down (SStatus 100 SControl 300)
[  253.269002] ata2: hard resetting link
[  253.744034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  253.760916] ata2.00: both IDENTIFYs aborted, assuming NODEV
[  253.760918] ata2.00: revalidation failed (errno=-2)
[  258.744007] ata2: hard resetting link
[  259.220034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  259.236504] ata2.00: configured for UDMA/133
[  259.236756] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[  259.236805] ata2: hotplug_status 0x2
[  259.244916] ata2.00: both IDENTIFYs aborted, assuming NODEV
[  259.244918] ata2.00: revalidation failed (errno=-2)
[  259.244970] ata2: hard resetting link
[  260.124035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  260.140502] ata2.00: configured for UDMA/133
[  260.140550] ata2: EH complete
[  290.140011] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  290.140064] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  290.140065]          res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[  290.140172] ata2.00: status: { DRDY }
[  290.140224] ata2: hard resetting link
[  290.460017] ata2: SATA link down (SStatus 100 SControl 300)
[  290.641004] ata2: hard resetting link
[  291.116034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  291.132503] ata2.00: configured for UDMA/133
[  291.132756] ata2.00: limiting speed to UDMA/100:PIO4
[  291.132805] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[  291.132854] ata2: hotplug_status 0x2
[  291.132906] ata2: hard resetting link
[  292.012035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  292.028502] ata2.00: configured for UDMA/100
[  292.028550] ata2: EH complete
[  322.028010] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  322.028063] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  322.028065]          res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[  322.028171] ata2.00: status: { DRDY }
[  322.028223] ata2: hard resetting link
[  322.348017] ata2: SATA link down (SStatus 100 SControl 300)
[  322.529002] ata2: hard resetting link
[  323.004035] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  323.020503] ata2.00: configured for UDMA/100
[  323.020755] ata2.00: limiting speed to UDMA/33:PIO4
[  323.020804] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4
[  323.020853] ata2: hotplug_status 0x2
[  323.020904] ata2: hard resetting link
[  323.900034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  323.916503] ata2.00: configured for UDMA/33
[  323.916551] ata2: EH complete
[  353.916011] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[  353.916064] ata2.00: cmd e0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[  353.916065]          res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
[  353.916172] ata2.00: status: { DRDY }
[  353.916223] ata2: hard resetting link
[  354.236016] ata2: SATA link down (SStatus 100 SControl 300)
[  354.417003] ata2: hard resetting link
[  354.892034] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  354.908504] ata2.00: configured for UDMA/33
[  354.908757] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[  354.908807] ata2: hotplug_status 0x2
[  354.924504] ata2.00: configured for UDMA/33
[  354.924555] sd 1:0:0:0: [sda] START_STOP FAILED
[  354.924602] sd 1:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[  354.924696] sd 1:0:0:0: [sda] Sense Key : Aborted Command [current] [descriptor]
[  354.924886] sd 1:0:0:0: [sda] Add. Sense: No additional sense information
[  354.925002] suspend_device(): scsi_bus_suspend+0x0/0x3f returns 134217730
[  354.925123] PM: Device 1:0:0:0 failed to suspend: error 134217730
[  354.925174] PM: Some devices failed to suspend
[  354.925243] usb usb1: type resume
[  354.953038] ata2: EH complete
[  354.953112] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[  354.953173] sd 1:0:0:0: [sda] Write Protect is off
[  354.953221] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  354.953237] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  354.953311] sd 1:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[  354.953368] sd 1:0:0:0: [sda] Write Protect is off
[  354.953416] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  354.953431] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  354.992018] usb usb2: type resume
[  354.992020] usb usb3: type resume
[  355.032009] usb usb4: type resume
[  355.032012] usb usb5: type resume
[  355.032013] usb 3-2: type resume
[  355.083004] i8042 i8042: resume
[  355.083027] atkbd serio0: legacy resume
[  355.083030] psmouse serio1: legacy resume
[  355.083034] ac97 0-0:ALC655: legacy resume
[  355.083037] platform floppy.0: resume
[  355.083040] rtc rtc0: legacy class resume
[  355.083074] platform floppy.0: completing resume
[  355.083078] i8042 i8042: completing resume
[  355.083081] usb 3-2: completing type resume
[  355.083083] usb usb5: completing type resume
[  355.083085] usb usb4: completing type resume
[  355.083087] usb usb3: completing type resume
[  355.083089] usb usb2: completing type resume
[  355.083091] usb usb1: completing type resume
[  355.083105] serial8250 serial8250: completing resume
[  355.083117] platform vesafb.0: completing resume
[  355.083119] pcspkr pcspkr: completing resume
[  355.083125] pci 0000:01:00.0: completing resume
[  355.083127] k8temp 0000:00:18.3: completing resume
[  355.083129] pci 0000:00:18.2: completing resume
[  355.083130] pci 0000:00:18.1: completing resume
[  355.083132] pci 0000:00:18.0: completing resume
[  355.083134] VIA 82xx Audio 0000:00:11.5: completing resume
[  355.083136] pci 0000:00:11.0: completing resume
[  355.083137] ehci_hcd 0000:00:10.4: completing resume
[  355.083139] uhci_hcd 0000:00:10.3: completing resume
[  355.083141] uhci_hcd 0000:00:10.2: completing resume
[  355.083143] uhci_hcd 0000:00:10.1: completing resume
[  355.083145] uhci_hcd 0000:00:10.0: completing resume
[  355.083147] VIA_IDE 0000:00:0f.1: completing resume
[  355.083148] sata_via 0000:00:0f.0: completing resume
[  355.083150] pci 0000:00:0e.0: completing resume
[  355.083152] sata_promise 0000:00:0d.0: completing resume
[  355.083154] r8169 0000:00:0b.0: completing resume
[  355.083156] sata_via 0000:00:08.0: completing resume
[  355.083157] pci 0000:00:01.0: completing resume
[  355.083159] agpgart-amd64 0000:00:00.0: completing resume
[  355.083170] PM: Finishing wakeup.
[  355.083171] Restarting tasks ... done.