* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
[not found] <494A34CA.9030906@bigtelecom.ru>
@ 2008-12-20 6:32 ` Andrew Morton
2008-12-22 2:21 ` Tejun Heo
0 siblings, 1 reply; 6+ messages in thread
From: Andrew Morton @ 2008-12-20 6:32 UTC (permalink / raw)
To: Badalian Vyacheslav; +Cc: linux-kernel, linux-ide
(cc linux-ide)
On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
> Hello all.
> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
> SATA controller in AHCI mode.
> Platform is Intel SR1530HSH
>
> Config attached.
>
> Any patches for test? Any ideas? Any other info needed? Or i must go to
> bugtracker? ;)
>
> # lspci
> 00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller
> 00:19.0 Ethernet controller: Intel Corporation 82566DM-2 Gigabit Network
> Connection (rev 02)
> 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #4 (rev 02)
> 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #5 (rev 02)
> 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
> Controller #2 (rev 02)
> 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 1 (rev 02)
> 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
> Port 5 (rev 02)
> 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #1 (rev 02)
> 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #2 (rev 02)
> 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
> Controller #3 (rev 02)
> 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
> Controller #1 (rev 02)
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
> 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface
> Controller (rev 02)
> 00:1f.2 SATA controller: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6
> port SATA AHCI Controller (rev 02)
> 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
> (rev 02)
> 02:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200e
> [Pilot] ServerEngines (SEP1) (rev 02)
> 03:02.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet
> Controller (rev 05)
>
> Thanks!
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-20 6:32 ` Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x Andrew Morton
@ 2008-12-22 2:21 ` Tejun Heo
2008-12-22 7:10 ` Badalian Vyacheslav
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Tejun Heo @ 2008-12-22 2:21 UTC (permalink / raw)
To: Andrew Morton; +Cc: Badalian Vyacheslav, linux-kernel, linux-ide
Andrew Morton wrote:
> (cc linux-ide)
>
> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
>
>> Hello all.
>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>> SATA controller in AHCI mode.
>> Platform is Intel SR1530HSH
>>
>> Config attached.
>>
>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>> bugtracker? ;)
Does ahci.ahci_em_messages=0 help?
--
tejun
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-22 2:21 ` Tejun Heo
@ 2008-12-22 7:10 ` Badalian Vyacheslav
2008-12-22 7:15 ` Tejun Heo
2008-12-23 6:32 ` Badalian Vyacheslav
2008-12-25 6:34 ` Re[retry]: " Badalian Vyacheslav
2 siblings, 1 reply; 6+ messages in thread
From: Badalian Vyacheslav @ 2008-12-22 7:10 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
Tejun Heo пишет:
> Andrew Morton wrote:
>
>> (cc linux-ide)
>>
>> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
>>
>>
>>> Hello all.
>>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>>> SATA controller in AHCI mode.
>>> Platform is Intel SR1530HSH
>>>
>>> Config attached.
>>>
>>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>>> bugtracker? ;)
>>>
>
> Does ahci.ahci_em_messages=0 help?
>
>
Hello!
echo 0 > /sys/module/ahci/parameters/ahci_em_messages
-bash: /sys/module/ahci/parameters/ahci_em_messages: Permission denied
ls -la /sys/module/ahci/parameters/ahci_em_messages
-r--r--r-- 1 root root 4096 Dec 22 10:04
/sys/module/ahci/parameters/ahci_em_messages
Any other chance to change without it reboot? Or i can change it only at
boot? I will reboot server at night.
Vyacheslav
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-22 7:10 ` Badalian Vyacheslav
@ 2008-12-22 7:15 ` Tejun Heo
0 siblings, 0 replies; 6+ messages in thread
From: Tejun Heo @ 2008-12-22 7:15 UTC (permalink / raw)
To: Badalian Vyacheslav; +Cc: Andrew Morton, linux-kernel, linux-ide
Badalian Vyacheslav wrote:
> echo 0 > /sys/module/ahci/parameters/ahci_em_messages
> -bash: /sys/module/ahci/parameters/ahci_em_messages: Permission denied
> ls -la /sys/module/ahci/parameters/ahci_em_messages
> -r--r--r-- 1 root root 4096 Dec 22 10:04
> /sys/module/ahci/parameters/ahci_em_messages
>
> Any other chance to change without it reboot? Or i can change it only at
> boot? I will reboot server at night.
You can unload and reload ahci but that often isn't too different
from rebooting.
--
tejun
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-22 2:21 ` Tejun Heo
2008-12-22 7:10 ` Badalian Vyacheslav
@ 2008-12-23 6:32 ` Badalian Vyacheslav
2008-12-25 6:34 ` Re[retry]: " Badalian Vyacheslav
2 siblings, 0 replies; 6+ messages in thread
From: Badalian Vyacheslav @ 2008-12-23 6:32 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
Tejun Heo пишет:
> Andrew Morton wrote:
>
>> (cc linux-ide)
>>
>> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
>>
>>
>>> Hello all.
>>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>>> SATA controller in AHCI mode.
>>> Platform is Intel SR1530HSH
>>>
>>> Config attached.
>>>
>>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>>> bugtracker? ;)
>>>
>
> Does ahci.ahci_em_messages=0 help?
>
>
All leds turned off. No green led at bay with hard disk.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re[retry]: Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x
2008-12-22 2:21 ` Tejun Heo
2008-12-22 7:10 ` Badalian Vyacheslav
2008-12-23 6:32 ` Badalian Vyacheslav
@ 2008-12-25 6:34 ` Badalian Vyacheslav
2 siblings, 0 replies; 6+ messages in thread
From: Badalian Vyacheslav @ 2008-12-25 6:34 UTC (permalink / raw)
To: Tejun Heo; +Cc: Andrew Morton, linux-kernel, linux-ide
>> (cc linux-ide)
>>
>> On Thu, 18 Dec 2008 14:32:26 +0300 Badalian Vyacheslav <slavon@bigtelecom.ru> wrote:
>>
>>
>>> Hello all.
>>> After update from 2.6.26 to 2.6.27 all leds at drive bays now red.
>>> SATA controller in AHCI mode.
>>> Platform is Intel SR1530HSH
>>>
>>> Config attached.
>>>
>>> Any patches for test? Any ideas? Any other info needed? Or i must go to
>>> bugtracker? ;)
>>>
>
> Does ahci.ahci_em_messages=0 help?
>
>
No. All leds is turned off. No green led at bay with hard disk.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-12-25 6:34 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <494A34CA.9030906@bigtelecom.ru>
2008-12-20 6:32 ` Red leds at harddisk bays on SR1530HSH after update to 2.6.27.x Andrew Morton
2008-12-22 2:21 ` Tejun Heo
2008-12-22 7:10 ` Badalian Vyacheslav
2008-12-22 7:15 ` Tejun Heo
2008-12-23 6:32 ` Badalian Vyacheslav
2008-12-25 6:34 ` Re[retry]: " Badalian Vyacheslav
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).