From: Robert Hancock <hancockr@shaw.ca>
To: linux-ide@vger.kernel.org
Cc: Paul Cartwright <ale@pcartwright.com>
Subject: Re: k3b won't burn, nerolinux will
Date: Mon, 29 Dec 2008 14:27:02 -0600 [thread overview]
Message-ID: <49593296.1080101@shaw.ca> (raw)
In-Reply-To: <alpine.DEB.1.10.0812291521490.30626@p34.internal.lan>
Justin Piszcz wrote:
>
>
> On Mon, 29 Dec 2008, Justin Piszcz wrote:
>
>>
>>
>> On Mon, 29 Dec 2008, Paul Cartwright wrote:
>>
>>> On Mon December 29 2008, you wrote:
>>>> Please install dvd+rw-tools as shown above (apt-get install it)
>>>>
>>> already installed:
>>> ~$ dpkg --list|grep dvd+rw
>>> ii dvd+rw-tools 7.1-3
>>> DVD+-RW/R tools
>>>
>>>
>>>> Then:
>>>>
>>>> Burn a DVD using the command:
>>>> growisofs -Z /dev/hda=FC-6-i386-DVD.iso
>>> how about:
>>> growisofs -Z /dev/scd0 k3b.project.iso (existing file)
>>>
>>>
>>>>
>>>> Or a CD:
>>>> cdrecord dev=/dev/scd0 -eject -v -dao driveropts=burnfree speed=48
>>>> -data
>>>> file.iso
>>>>
>>>> Then, please provide the output from that application/burn-run. I
>>>> recommend you do this to isolate the problem.
>>> # growisofs -Z /dev/scd0 K3b.project.iso
>>> Executing 'genisoimage K3b.project.iso | builtin_dd of=/dev/scd0 obs=32k
>>> seek=0'
>>> I: -input-charset not specified, using utf-8 (detected in locale
>>> settings)
>>> 0.52% done, estimate finish Mon Dec 29 12:20:31 2008
>>> 1.05% done, estimate finish Mon Dec 29 12:20:31 2008
>>> 1.57% done, estimate finish Mon Dec 29 12:20:31 2008
>>> /dev/scd0: "Current Write Speed" is 16.4x1352KBps.
>>> 2.09% done, estimate finish Mon Dec 29 12:37:15 2008
>>> 2.61% done, estimate finish Mon Dec 29 12:34:32 2008
>>> 3.14% done, estimate finish Mon Dec 29 12:32:44 2008
>>> 3.66% done, estimate finish Mon Dec 29 12:31:26 2008
>>> 4.18% done, estimate finish Mon Dec 29 12:30:52 2008
>>> 4.70% done, estimate finish Mon Dec 29 12:30:04 2008
>>> 5.23% done, estimate finish Mon Dec 29 12:29:26 2008
>>> 5.75% done, estimate finish Mon Dec 29 12:28:55 2008
>>> 6.27% done, estimate finish Mon Dec 29 12:28:29 2008
>>> 6.80% done, estimate finish Mon Dec 29 12:28:07 2008
>>> 7.32% done, estimate finish Mon Dec 29 12:27:48 2008
>>> 7.84% done, estimate finish Mon Dec 29 12:27:31 2008
>>> 8.36% done, estimate finish Mon Dec 29 12:27:17 2008
>>> 8.89% done, estimate finish Mon Dec 29 12:27:04 2008
>>> 9.41% done, estimate finish Mon Dec 29 12:26:53 2008
>>> 9.93% done, estimate finish Mon Dec 29 12:26:43 2008
>>> 10.45% done, estimate finish Mon Dec 29 12:26:34 2008
>>> 10.98% done, estimate finish Mon Dec 29 12:26:26 2008
>>> 11.50% done, estimate finish Mon Dec 29 12:26:18 2008
>>> 12.02% done, estimate finish Mon Dec 29 12:26:12 2008
>>> 12.55% done, estimate finish Mon Dec 29 12:26:05 2008
>>> 13.07% done, estimate finish Mon Dec 29 12:26:00 2008
>>> 13.59% done, estimate finish Mon Dec 29 12:25:54 2008
>>> 14.11% done, estimate finish Mon Dec 29 12:25:49 2008
>>> 14.64% done, estimate finish Mon Dec 29 12:25:45 2008
>>> 15.16% done, estimate finish Mon Dec 29 12:25:41 2008
>>> 15.68% done, estimate finish Mon Dec 29 12:25:37 2008
>>> 16.20% done, estimate finish Mon Dec 29 12:25:33 2008
>>> 16.73% done, estimate finish Mon Dec 29 12:25:29 2008
>>> 17.25% done, estimate finish Mon Dec 29 12:25:26 2008
>>> 17.77% done, estimate finish Mon Dec 29 12:25:23 2008
>>> 18.29% done, estimate finish Mon Dec 29 12:25:20 2008
>>> 18.82% done, estimate finish Mon Dec 29 12:25:17 2008
>>> 19.34% done, estimate finish Mon Dec 29 12:25:15 2008
>>> 19.86% done, estimate finish Mon Dec 29 12:25:12 2008
>>> 20.39% done, estimate finish Mon Dec 29 12:25:10 2008
>>> 20.91% done, estimate finish Mon Dec 29 12:25:08 2008
>>> 21.43% done, estimate finish Mon Dec 29 12:25:06 2008
>>> 21.95% done, estimate finish Mon Dec 29 12:25:04 2008
>>> 22.48% done, estimate finish Mon Dec 29 12:25:02 2008
>>> 23.00% done, estimate finish Mon Dec 29 12:25:00 2008
>>> 23.52% done, estimate finish Mon Dec 29 12:24:58 2008
>>> 24.04% done, estimate finish Mon Dec 29 12:24:57 2008
>>> 24.57% done, estimate finish Mon Dec 29 12:24:55 2008
>>> 25.09% done, estimate finish Mon Dec 29 12:24:50 2008
>>> 25.61% done, estimate finish Mon Dec 29 12:24:48 2008
>>> 26.14% done, estimate finish Mon Dec 29 12:24:47 2008
>>> 26.66% done, estimate finish Mon Dec 29 12:24:46 2008
>>> 27.18% done, estimate finish Mon Dec 29 12:24:44 2008
>>> :-[ WRITE@LBA=3c2d0h failed with SK=3h/ASC=80h/ACQ=04h]: Input/output
>>> error
>>> :-( write failed: Input/output error
>>> /dev/scd0: flushing cache
>>> /dev/scd0: updating RMA
>>> /dev/scd0: closing session
>>
>
> CC'd linux-ide for ideas here.
>
> Also, they may ask you to try a burn with speed=1 to eliminate any weird
> bottlenecks or bad media.
We don't have the full back story here.. The drive apparently returned
an error code that's listed as vendor-specific in the MMC specs, so hard
to say what it's trying to tell you.
prev parent reply other threads:[~2008-12-29 20:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200812290933.20277.ale@pcartwright.com>
[not found] ` <200812291101.32026.ale@pcartwright.com>
[not found] ` <alpine.DEB.1.10.0812291128000.23543@p34.internal.lan>
[not found] ` <200812291223.34191.ale@pcartwright.com>
[not found] ` <alpine.DEB.1.10.0812291432440.28158@p34.internal.lan>
2008-12-29 20:22 ` k3b won't burn, nerolinux will Justin Piszcz
2008-12-29 20:27 ` Robert Hancock [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49593296.1080101@shaw.ca \
--to=hancockr@shaw.ca \
--cc=ale@pcartwright.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).